Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id ; Fri, 14 Feb 2003 08:05:28 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id ; Fri, 14 Feb 2003 08:04:22 -0500 Received: from cs-ats40.donpac.ru ([217.107.128.161]:25870 "EHLO pazke") by vger.kernel.org with ESMTP id ; Fri, 14 Feb 2003 07:53:15 -0500 Date: Fri, 14 Feb 2003 15:58:28 +0300 To: linux-kernel@vger.kernel.org Cc: Linus Torvalds Subject: [PATCH] visws: core (9/13) Message-ID: <20030214125828.GI8230@pazke> Mail-Followup-To: linux-kernel@vger.kernel.org, Linus Torvalds Mime-Version: 1.0 Content-Type: multipart/mixed; boundary="fKov5AqTsvseSZ0Z" Content-Disposition: inline User-Agent: Mutt/1.3.28i X-Uname: Linux 2.4.20aa1 i686 unknown From: Andrey Panin Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 35352 Lines: 1258 --fKov5AqTsvseSZ0Z Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Hi. This patch contains core support for visws subarch. Please consider applying. Best regards. -- Andrey Panin | Embedded systems software developer pazke@orbita1.ru | PGP key: wwwkeys.pgp.net --fKov5AqTsvseSZ0Z Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename=patch-visws-core diff -urN -X /usr/share/dontdiff linux-2.5.60.vanilla/arch/i386/kernel/setup.c linux-2.5.60/arch/i386/kernel/setup.c --- linux-2.5.60.vanilla/arch/i386/kernel/setup.c Thu Feb 13 20:29:06 2003 +++ linux-2.5.60/arch/i386/kernel/setup.c Thu Feb 13 20:42:02 2003 @@ -92,7 +92,6 @@ extern int root_mountflags; extern char _text, _etext, _edata, _end; extern int blk_nohighio; -void __init visws_get_board_type_and_rev(void); unsigned long saved_videomode; diff -urN -X /usr/share/dontdiff linux-2.5.60.vanilla/arch/i386/mach-visws/Makefile linux-2.5.60/arch/i386/mach-visws/Makefile --- linux-2.5.60.vanilla/arch/i386/mach-visws/Makefile Thu Feb 13 20:29:07 2003 +++ linux-2.5.60/arch/i386/mach-visws/Makefile Thu Feb 13 20:42:02 2003 @@ -4,8 +4,7 @@ EXTRA_CFLAGS += -I../kernel -obj-y := setup.o traps.o +obj-y := setup.o traps.o reboot.o -obj-$(CONFIG_PCI) += pci-visws.o obj-$(CONFIG_X86_VISWS_APIC) += visws_apic.o obj-$(CONFIG_X86_LOCAL_APIC) += mpparse.o diff -urN -X /usr/share/dontdiff linux-2.5.60.vanilla/arch/i386/mach-visws/mpparse.c linux-2.5.60/arch/i386/mach-visws/mpparse.c --- linux-2.5.60.vanilla/arch/i386/mach-visws/mpparse.c Thu Feb 13 20:29:07 2003 +++ linux-2.5.60/arch/i386/mach-visws/mpparse.c Thu Feb 13 20:42:02 2003 @@ -1,17 +1,15 @@ -#include -#include -#include -#include + #include -#include -#include -#include -#include +#include +#include #include -#include +#include #include -#include +#include + +#include "cobalt.h" +#include "mach_apic.h" /* Have we found an MP table */ int smp_found_config; @@ -43,25 +41,84 @@ /* Processor that is doing the boot up */ unsigned int boot_cpu_physical_apicid = -1U; unsigned int boot_cpu_logical_apicid = -1U; + /* Internal processor count */ static unsigned int num_processors; /* Bitmask of physically existing CPUs */ unsigned long phys_cpu_present_map; +u8 raw_phys_apicid[NR_CPUS] = { [0 ... NR_CPUS - 1] = BAD_APICID }; + /* * The Visual Workstation is Intel MP compliant in the hardware * sense, but it doesn't have a BIOS(-configuration table). * No problem for Linux. */ + +void __init MP_processor_info (struct mpc_config_processor *m) +{ + int ver, logical_apicid; + + if (!(m->mpc_cpuflag & CPU_ENABLED)) + return; + + logical_apicid = m->mpc_apicid; + printk(KERN_INFO "%sCPU #%d %ld:%ld APIC version %d\n", + m->mpc_cpuflag & CPU_BOOTPROCESSOR ? "Bootup " : "", + m->mpc_apicid, + (m->mpc_cpufeature & CPU_FAMILY_MASK) >> 8, + (m->mpc_cpufeature & CPU_MODEL_MASK) >> 4, + m->mpc_apicver); + + if (m->mpc_cpuflag & CPU_BOOTPROCESSOR) { + boot_cpu_physical_apicid = m->mpc_apicid; + boot_cpu_logical_apicid = logical_apicid; + } + + num_processors++; + + if (m->mpc_apicid > MAX_APICS) { + printk(KERN_ERR "Processor #%d INVALID. (Max ID: %d).\n", + m->mpc_apicid, MAX_APICS); + --num_processors; + return; + } + ver = m->mpc_apicver; + + phys_cpu_present_map |= apicid_to_cpu_present(m->mpc_apicid); + /* + * Validate version + */ + if (ver == 0x0) { + printk(KERN_ERR "BIOS bug, APIC version is 0 for CPU#%d! " + "fixing up to 0x10. (tell your hw vendor)\n", + m->mpc_apicid); + ver = 0x10; + } + apic_version[m->mpc_apicid] = ver; + raw_phys_apicid[num_processors - 1] = m->mpc_apicid; +} + void __init find_smp_config(void) { - smp_found_config = 1; + struct mpc_config_processor *mp = phys_to_virt(CO_CPU_TAB_PHYS); + unsigned short ncpus = readw(phys_to_virt(CO_CPU_NUM_PHYS)); + + if (ncpus > CO_CPU_MAX) { + printk(KERN_WARNING "find_visws_smp: got cpu count of %d at %p\n", + ncpus, mp); - phys_cpu_present_map |= 2; /* or in id 1 */ - apic_version[1] |= 0x10; /* integrated APIC */ - apic_version[0] |= 0x10; + ncpus = CO_CPU_MAX; + } + + smp_found_config = 1; + while (ncpus--) + MP_processor_info(mp++); mp_lapic_addr = APIC_DEFAULT_PHYS_BASE; } +void __init get_smp_config (void) +{ +} diff -urN -X /usr/share/dontdiff linux-2.5.60.vanilla/arch/i386/mach-visws/reboot.c linux-2.5.60/arch/i386/mach-visws/reboot.c --- linux-2.5.60.vanilla/arch/i386/mach-visws/reboot.c Thu Jan 1 03:00:00 1970 +++ linux-2.5.60/arch/i386/mach-visws/reboot.c Thu Feb 13 20:42:02 2003 @@ -0,0 +1,48 @@ + +#include +#include +#include + +#include +#include "piix4.h" + +void (*pm_power_off)(void); + +int reboot_thru_bios; +int reboot_smp; + +void machine_restart(char * __unused) +{ +#ifdef CONFIG_SMP + smp_send_stop(); +#endif + + /* + * Visual Workstations restart after this + * register is poked on the PIIX4 + */ + outb(PIIX4_RESET_VAL, PIIX4_RESET_PORT); +} + +void machine_power_off(void) +{ + unsigned short pm_status; + extern unsigned int pci_bus0; + + while ((pm_status = inw(PMSTS_PORT)) & 0x100) + outw(pm_status, PMSTS_PORT); + + outw(PM_SUSPEND_ENABLE, PMCNTRL_PORT); + + mdelay(10); + +#define PCI_CONF1_ADDRESS(bus, devfn, reg) \ + (0x80000000 | (bus << 16) | (devfn << 8) | (reg & ~3)) + + outl(PCI_CONF1_ADDRESS(pci_bus0, SPECIAL_DEV, SPECIAL_REG), 0xCF8); + outl(PIIX_SPECIAL_STOP, 0xCFC); +} + +void machine_halt(void) +{ +} diff -urN -X /usr/share/dontdiff linux-2.5.60.vanilla/arch/i386/mach-visws/setup.c linux-2.5.60/arch/i386/mach-visws/setup.c --- linux-2.5.60.vanilla/arch/i386/mach-visws/setup.c Thu Feb 13 20:29:07 2003 +++ linux-2.5.60/arch/i386/mach-visws/setup.c Thu Feb 13 20:42:02 2003 @@ -9,67 +9,26 @@ #include #include -#include #include #include +#include "cobalt.h" +#include "piix4.h" char visws_board_type = -1; char visws_board_rev = -1; -#define PIIX_PM_START 0x0F80 - -#define SIO_GPIO_START 0x0FC0 - -#define SIO_PM_START 0x0FC8 - -#define PMBASE PIIX_PM_START -#define GPIREG0 (PMBASE+0x30) -#define GPIREG(x) (GPIREG0+((x)/8)) -#define PIIX_GPI_BD_ID1 18 -#define PIIX_GPI_BD_REG GPIREG(PIIX_GPI_BD_ID1) - -#define PIIX_GPI_BD_SHIFT (PIIX_GPI_BD_ID1 % 8) - -#define SIO_INDEX 0x2e -#define SIO_DATA 0x2f - -#define SIO_DEV_SEL 0x7 -#define SIO_DEV_ENB 0x30 -#define SIO_DEV_MSB 0x60 -#define SIO_DEV_LSB 0x61 - -#define SIO_GP_DEV 0x7 - -#define SIO_GP_BASE SIO_GPIO_START -#define SIO_GP_MSB (SIO_GP_BASE>>8) -#define SIO_GP_LSB (SIO_GP_BASE&0xff) - -#define SIO_GP_DATA1 (SIO_GP_BASE+0) - -#define SIO_PM_DEV 0x8 - -#define SIO_PM_BASE SIO_PM_START -#define SIO_PM_MSB (SIO_PM_BASE>>8) -#define SIO_PM_LSB (SIO_PM_BASE&0xff) -#define SIO_PM_INDEX (SIO_PM_BASE+0) -#define SIO_PM_DATA (SIO_PM_BASE+1) - -#define SIO_PM_FER2 0x1 - -#define SIO_PM_GP_EN 0x80 - void __init visws_get_board_type_and_rev(void) { int raw; visws_board_type = (char)(inb_p(PIIX_GPI_BD_REG) & PIIX_GPI_BD_REG) >> PIIX_GPI_BD_SHIFT; -/* - * Get Board rev. - * First, we have to initialize the 307 part to allow us access - * to the GPIO registers. Let's map them at 0x0fc0 which is right - * after the PIIX4 PM section. - */ + /* + * Get Board rev. + * First, we have to initialize the 307 part to allow us access + * to the GPIO registers. Let's map them at 0x0fc0 which is right + * after the PIIX4 PM section. + */ outb_p(SIO_DEV_SEL, SIO_INDEX); outb_p(SIO_GP_DEV, SIO_DATA); /* Talk to GPIO regs. */ @@ -82,11 +41,11 @@ outb_p(SIO_DEV_ENB, SIO_INDEX); outb_p(1, SIO_DATA); /* Enable GPIO registers. */ -/* - * Now, we have to map the power management section to write - * a bit which enables access to the GPIO registers. - * What lunatic came up with this shit? - */ + /* + * Now, we have to map the power management section to write + * a bit which enables access to the GPIO registers. + * What lunatic came up with this shit? + */ outb_p(SIO_DEV_SEL, SIO_INDEX); outb_p(SIO_PM_DEV, SIO_DATA); /* Talk to GPIO regs. */ @@ -99,18 +58,18 @@ outb_p(SIO_DEV_ENB, SIO_INDEX); outb_p(1, SIO_DATA); /* Enable PM registers. */ -/* - * Now, write the PM register which enables the GPIO registers. - */ + /* + * Now, write the PM register which enables the GPIO registers. + */ outb_p(SIO_PM_FER2, SIO_PM_INDEX); outb_p(SIO_PM_GP_EN, SIO_PM_DATA); -/* - * Now, initialize the GPIO registers. - * We want them all to be inputs which is the - * power on default, so let's leave them alone. - * So, let's just read the board rev! - */ + /* + * Now, initialize the GPIO registers. + * We want them all to be inputs which is the + * power on default, so let's leave them alone. + * So, let's just read the board rev! + */ raw = inb_p(SIO_GP_DATA1); raw &= 0x7f; /* 7 bits of valid board revision ID. */ @@ -128,10 +87,10 @@ visws_board_rev = raw; } - printk(KERN_INFO "Silicon Graphics %s (rev %d)\n", - visws_board_type == VISWS_320 ? "320" : + printk(KERN_INFO "Silicon Graphics Visual Workstation %s (rev %d) detected\n", + (visws_board_type == VISWS_320 ? "320" : (visws_board_type == VISWS_540 ? "540" : - "unknown"), visws_board_rev); + "unknown")), visws_board_rev); } void __init pre_intr_init_hook(void) @@ -150,11 +109,16 @@ { visws_get_board_type_and_rev(); } -static struct irqaction irq0 = { timer_interrupt, SA_INTERRUPT, 0, "timer", NULL, NULL}; + +static struct irqaction irq0 = { + .handler = timer_interrupt, + .flags = SA_INTERRUPT, + .name = "timer", +}; void __init time_init_hook(void) { - printk("Starting Cobalt Timer system clock\n"); + printk(KERN_INFO "Starting Cobalt Timer system clock\n"); /* Set the countdown value */ co_cpu_write(CO_CPU_TIMEVAL, CO_TIME_HZ/HZ); @@ -166,5 +130,5 @@ co_cpu_write(CO_CPU_CTRL, co_cpu_read(CO_CPU_CTRL) & ~CO_CTRL_TIMEMASK); /* Wire cpu IDT entry to s/w handler (and Cobalt APIC to IDT) */ - setup_irq(CO_IRQ_TIMER, &irq0); + setup_irq(0, &irq0); } diff -urN -X /usr/share/dontdiff linux-2.5.60.vanilla/arch/i386/mach-visws/traps.c linux-2.5.60/arch/i386/mach-visws/traps.c --- linux-2.5.60.vanilla/arch/i386/mach-visws/traps.c Thu Feb 13 20:29:07 2003 +++ linux-2.5.60/arch/i386/mach-visws/traps.c Thu Feb 13 20:42:02 2003 @@ -3,132 +3,68 @@ #include #include #include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include #include +#include +#include -#include -#include #include -#include -#include -#include -#include - -#include #include #include +#include +#include "cobalt.h" +#include "lithium.h" -#ifdef CONFIG_X86_VISWS_APIC -#include -#include -#include -#endif - -#ifdef CONFIG_X86_VISWS_APIC - -/* - * On Rev 005 motherboards legacy device interrupt lines are wired directly - * to Lithium from the 307. But the PROM leaves the interrupt type of each - * 307 logical device set appropriate for the 8259. Later we'll actually use - * the 8259, but for now we have to flip the interrupt types to - * level triggered, active lo as required by Lithium. - */ - -#define REG 0x2e /* The register to read/write */ -#define DEV 0x07 /* Register: Logical device select */ -#define VAL 0x2f /* The value to read/write */ -static void -superio_outb(int dev, int reg, int val) -{ - outb(DEV, REG); - outb(dev, VAL); - outb(reg, REG); - outb(val, VAL); -} +#define A01234 (LI_INTA_0 | LI_INTA_1 | LI_INTA_2 | LI_INTA_3 | LI_INTA_4) +#define BCD (LI_INTB | LI_INTC | LI_INTD) +#define ALLDEVS (A01234 | BCD) -static int __attribute__ ((unused)) -superio_inb(int dev, int reg) +static __init void lithium_init(void) { - outb(DEV, REG); - outb(dev, VAL); - outb(reg, REG); - return inb(VAL); -} - -#define FLOP 3 /* floppy logical device */ -#define PPORT 4 /* parallel logical device */ -#define UART5 5 /* uart2 logical device (not wired up) */ -#define UART6 6 /* uart1 logical device (THIS is the serial port!) */ -#define IDEST 0x70 /* int. destination (which 307 IRQ line) reg. */ -#define ITYPE 0x71 /* interrupt type register */ - -/* interrupt type bits */ -#define LEVEL 0x01 /* bit 0, 0 == edge triggered */ -#define ACTHI 0x02 /* bit 1, 0 == active lo */ + set_fixmap(FIX_LI_PCIA, LI_PCI_A_PHYS); + set_fixmap(FIX_LI_PCIB, LI_PCI_B_PHYS); -static __init void -superio_init(void) -{ - if (visws_board_type == VISWS_320 && visws_board_rev == 5) { - superio_outb(UART6, IDEST, 0); /* 0 means no intr propagated */ - printk("SGI 320 rev 5: disabling 307 uart1 interrupt\n"); + if ((li_pcia_read16(PCI_VENDOR_ID) != PCI_VENDOR_ID_SGI) || + (li_pcia_read16(PCI_DEVICE_ID) != PCI_VENDOR_ID_SGI_LITHIUM)) { + printk(KERN_EMERG "Lithium hostbridge %c not found\n", 'A'); + panic("This machine is not SGI Visual Workstation 320/540"); } -} -static __init void -lithium_init(void) -{ - set_fixmap(FIX_LI_PCIA, LI_PCI_A_PHYS); - printk("Lithium PCI Bridge A, Bus Number: %d\n", - li_pcia_read16(LI_PCI_BUSNUM) & 0xff); - set_fixmap(FIX_LI_PCIB, LI_PCI_B_PHYS); - printk("Lithium PCI Bridge B (PIIX4), Bus Number: %d\n", - li_pcib_read16(LI_PCI_BUSNUM) & 0xff); + if ((li_pcib_read16(PCI_VENDOR_ID) != PCI_VENDOR_ID_SGI) || + (li_pcib_read16(PCI_DEVICE_ID) != PCI_VENDOR_ID_SGI_LITHIUM)) { + printk(KERN_EMERG "Lithium hostbridge %c not found\n", 'B'); + panic("This machine is not SGI Visual Workstation 320/540"); + } - /* XXX blindly enables all interrupts */ - li_pcia_write16(LI_PCI_INTEN, 0xffff); - li_pcib_write16(LI_PCI_INTEN, 0xffff); + li_pcia_write16(LI_PCI_INTEN, ALLDEVS); + li_pcib_write16(LI_PCI_INTEN, ALLDEVS); } -static __init void -cobalt_init(void) +static __init void cobalt_init(void) { /* * On normal SMP PC this is used only with SMP, but we have to * use it and set it up here to start the Cobalt clock */ set_fixmap(FIX_APIC_BASE, APIC_DEFAULT_PHYS_BASE); - printk("Local APIC ID %lx\n", apic_read(APIC_ID)); - printk("Local APIC Version %lx\n", apic_read(APIC_LVR)); + setup_local_APIC(); + printk(KERN_INFO "Local APIC Version %#lx, ID %#lx\n", + apic_read(APIC_LVR), apic_read(APIC_ID)); set_fixmap(FIX_CO_CPU, CO_CPU_PHYS); - printk("Cobalt Revision %lx\n", co_cpu_read(CO_CPU_REV)); - set_fixmap(FIX_CO_APIC, CO_APIC_PHYS); - printk("Cobalt APIC ID %lx\n", co_apic_read(CO_APIC_ID)); + printk(KERN_INFO "Cobalt Revision %#lx, APIC ID %#lx\n", + co_cpu_read(CO_CPU_REV), co_apic_read(CO_APIC_ID)); /* Enable Cobalt APIC being careful to NOT change the ID! */ - co_apic_write(CO_APIC_ID, co_apic_read(CO_APIC_ID)|CO_APIC_ENABLE); + co_apic_write(CO_APIC_ID, co_apic_read(CO_APIC_ID) | CO_APIC_ENABLE); - printk("Cobalt APIC enabled: ID reg %lx\n", co_apic_read(CO_APIC_ID)); + printk(KERN_INFO "Cobalt APIC enabled: ID reg %#lx\n", + co_apic_read(CO_APIC_ID)); } -#endif -void __init trap_init_hook() +void __init trap_init_hook(void) { -#ifdef CONFIG_X86_VISWS_APIC - superio_init(); lithium_init(); cobalt_init(); -#endif } diff -urN -X /usr/share/dontdiff linux-2.5.60.vanilla/arch/i386/mach-visws/visws_apic.c linux-2.5.60/arch/i386/mach-visws/visws_apic.c --- linux-2.5.60.vanilla/arch/i386/mach-visws/visws_apic.c Thu Feb 13 20:29:07 2003 +++ linux-2.5.60/arch/i386/mach-visws/visws_apic.c Thu Feb 13 20:42:02 2003 @@ -1,5 +1,5 @@ /* - * linux/arch/i386/kernel/visws_apic.c + * linux/arch/i386/mach_visws/visws_apic.c * * Copyright (C) 1999 Bent Hagemark, Ingo Molnar * @@ -10,234 +10,180 @@ * hardware in the system uses this controller directly. Legacy devices * are connected to the PIIX4 which in turn has its 8259(s) connected to * a of the Cobalt APIC entry. + * + * 09/02/2000 - Updated for 2.4 by jbarnes@sgi.com + * + * 25/11/2002 - Updated for 2.5 by Andrey Panin */ -#include -#include +#include #include -#include -#include -#include #include -#include -#include -#include -#include +#include #include #include -#include #include -#include -#include -#include -#include -#include -#include - -#include - -#include - -/* - * This is the PIIX4-based 8259 that is wired up indirectly to Cobalt - * -- not the manner expected by the normal 8259 code in irq.c. - * - * there is a 'master' physical interrupt source that gets sent to - * the CPU. But in the chipset there are various 'virtual' interrupts - * waiting to be handled. We represent this to Linux through a 'master' - * interrupt controller type, and through a special virtual interrupt- - * controller. Device drivers only see the virtual interrupt sources. - */ - -#define CO_IRQ_BASE 0x20 /* This is the 0x20 in init_IRQ()! */ - -static void startup_piix4_master_irq(unsigned int irq); -static void shutdown_piix4_master_irq(unsigned int irq); -static void do_piix4_master_IRQ(unsigned int irq, struct pt_regs * regs); -#define enable_piix4_master_irq startup_piix4_master_irq -#define disable_piix4_master_irq shutdown_piix4_master_irq +#include +#include -static struct hw_interrupt_type piix4_master_irq_type = { - "PIIX4-master", - startup_piix4_master_irq, - shutdown_piix4_master_irq, - do_piix4_master_IRQ, - enable_piix4_master_irq, - disable_piix4_master_irq -}; - -static void enable_piix4_virtual_irq(unsigned int irq); -static void disable_piix4_virtual_irq(unsigned int irq); -#define startup_piix4_virtual_irq enable_piix4_virtual_irq -#define shutdown_piix4_virtual_irq disable_piix4_virtual_irq - -static struct hw_interrupt_type piix4_virtual_irq_type = { - "PIIX4-virtual", - startup_piix4_virtual_irq, - shutdown_piix4_virtual_irq, - 0, /* no handler, it's never called physically */ - enable_piix4_virtual_irq, - disable_piix4_virtual_irq -}; - -/* - * This is the SGI Cobalt (IO-)APIC: - */ +#include "cobalt.h" +#include "irq_vectors.h" -static void do_cobalt_IRQ(unsigned int irq, struct pt_regs * regs); -static void enable_cobalt_irq(unsigned int irq); -static void disable_cobalt_irq(unsigned int irq); -static void startup_cobalt_irq(unsigned int irq); -#define shutdown_cobalt_irq disable_cobalt_irq -static spinlock_t irq_controller_lock = SPIN_LOCK_UNLOCKED; +int irq_vector[NR_IRQS] = { FIRST_EXTERNAL_VECTOR, 0 }; -static struct hw_interrupt_type cobalt_irq_type = { - "Cobalt-APIC", - startup_cobalt_irq, - shutdown_cobalt_irq, - do_cobalt_IRQ, - enable_cobalt_irq, - disable_cobalt_irq -}; +static spinlock_t cobalt_lock = SPIN_LOCK_UNLOCKED; /* - * Not an __init, needed by the reboot code + * Set the given Cobalt APIC Redirection Table entry to point + * to the given IDT vector/index. */ -void disable_IO_APIC(void) +static inline void co_apic_set(int entry, int irq) { - /* Nop on Cobalt */ -} + co_apic_write(CO_APIC_LO(entry), CO_APIC_LEVEL | irq_vector[irq]); + co_apic_write(CO_APIC_HI(entry), 0); +} /* * Cobalt (IO)-APIC functions to handle PCI devices. */ - -static void disable_cobalt_irq(unsigned int irq) +static inline int co_apic_ide0_hack(void) { - /* XXX undo the APIC entry here? */ + extern char visws_board_type; + extern char visws_board_rev; - /* - * definitely, we do not want to have IRQ storms from - * unused devices --mingo - */ + if (visws_board_type == VISWS_320 && visws_board_rev == 5) + return 5; + return CO_APIC_IDE0; } -static void enable_cobalt_irq(unsigned int irq) +static int is_co_apic(unsigned int irq) { + if (IS_CO_APIC(irq)) + return CO_APIC(irq); + + switch (irq) { + case 0: return CO_APIC_CPU; + case CO_IRQ_IDE0: return co_apic_ide0_hack(); + case CO_IRQ_IDE1: return CO_APIC_IDE1; + default: return -1; + } } + /* - * Set the given Cobalt APIC Redirection Table entry to point - * to the given IDT vector/index. + * This is the SGI Cobalt (IO-)APIC: */ -static void co_apic_set(int entry, int idtvec) + +static void enable_cobalt_irq(unsigned int irq) { - co_apic_write(CO_APIC_LO(entry), CO_APIC_LEVEL | (CO_IRQ_BASE+idtvec)); - co_apic_write(CO_APIC_HI(entry), 0); + co_apic_set(is_co_apic(irq), irq); +} - printk("Cobalt APIC Entry %d IDT Vector %d\n", entry, idtvec); +static void disable_cobalt_irq(unsigned int irq) +{ + int entry = is_co_apic(irq); + + co_apic_write(CO_APIC_LO(entry), CO_APIC_MASK); + co_apic_read(CO_APIC_LO(entry)); } /* * "irq" really just serves to identify the device. Here is where we * map this to the Cobalt APIC entry where it's physically wired. - * This is called via request_irq -> setup_x86_irq -> irq_desc->startup() + * This is called via request_irq -> setup_irq -> irq_desc->startup() */ -static void startup_cobalt_irq(unsigned int irq) +static unsigned int startup_cobalt_irq(unsigned int irq) { - /* - * These "irq"'s are wired to the same Cobalt APIC entries - * for all (known) motherboard types/revs - */ - switch (irq) { - case CO_IRQ_TIMER: co_apic_set(CO_APIC_CPU, CO_IRQ_TIMER); - return; + unsigned long flags; - case CO_IRQ_ENET: co_apic_set(CO_APIC_ENET, CO_IRQ_ENET); - return; + spin_lock_irqsave(&cobalt_lock, flags); + if ((irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS | IRQ_WAITING))) + irq_desc[irq].status &= ~(IRQ_DISABLED | IRQ_INPROGRESS | IRQ_WAITING); + enable_cobalt_irq(irq); + spin_unlock_irqrestore(&cobalt_lock, flags); + return 0; +} - case CO_IRQ_SERIAL: return; /* XXX move to piix4-8259 "virtual" */ +static void ack_cobalt_irq(unsigned int irq) +{ + unsigned long flags; - case CO_IRQ_8259: co_apic_set(CO_APIC_8259, CO_IRQ_8259); - return; - - case CO_IRQ_IDE: - switch (visws_board_type) { - case VISWS_320: - switch (visws_board_rev) { - case 5: - co_apic_set(CO_APIC_0_5_IDE0, CO_IRQ_IDE); - co_apic_set(CO_APIC_0_5_IDE1, CO_IRQ_IDE); - return; - case 6: - co_apic_set(CO_APIC_0_6_IDE0, CO_IRQ_IDE); - co_apic_set(CO_APIC_0_6_IDE1, CO_IRQ_IDE); - return; - } - case VISWS_540: - switch (visws_board_rev) { - case 2: - co_apic_set(CO_APIC_1_2_IDE0, CO_IRQ_IDE); - return; - } - } - break; - default: - panic("huh?"); - } + spin_lock_irqsave(&cobalt_lock, flags); + disable_cobalt_irq(irq); + apic_write(APIC_EOI, APIC_EIO_ACK); + spin_unlock_irqrestore(&cobalt_lock, flags); } +static void end_cobalt_irq(unsigned int irq) +{ + unsigned long flags; + + spin_lock_irqsave(&cobalt_lock, flags); + if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS))) + enable_cobalt_irq(irq); + spin_unlock_irqrestore(&cobalt_lock, flags); +} + +static struct hw_interrupt_type cobalt_irq_type = { + .typename = "Cobalt-APIC", + .startup = startup_cobalt_irq, + .shutdown = disable_cobalt_irq, + .enable = enable_cobalt_irq, + .disable = disable_cobalt_irq, + .ack = ack_cobalt_irq, + .end = end_cobalt_irq, +}; + + /* - * This is the handle() op in do_IRQ() + * This is the PIIX4-based 8259 that is wired up indirectly to Cobalt + * -- not the manner expected by the code in i8259.c. + * + * there is a 'master' physical interrupt source that gets sent to + * the CPU. But in the chipset there are various 'virtual' interrupts + * waiting to be handled. We represent this to Linux through a 'master' + * interrupt controller type, and through a special virtual interrupt- + * controller. Device drivers only see the virtual interrupt sources. */ -static void do_cobalt_IRQ(unsigned int irq, struct pt_regs * regs) +static unsigned int startup_piix4_master_irq(unsigned int irq) { - struct irqaction * action; - irq_desc_t *desc = irq_desc + irq; + init_8259A(0); - spin_lock(&irq_controller_lock); - { - unsigned int status; - /* XXX APIC EOI? */ - status = desc->status & ~(IRQ_REPLAY | IRQ_WAITING); - action = NULL; - if (!(status & (IRQ_DISABLED | IRQ_INPROGRESS))) { - action = desc->action; - status |= IRQ_INPROGRESS; - } - desc->status = status; - } - spin_unlock(&irq_controller_lock); + return startup_cobalt_irq(irq); +} - /* Exit early if we had no action or it was disabled */ - if (!action) - return; - - handle_IRQ_event(irq, regs, action); - - (void)co_cpu_read(CO_CPU_REV); /* Sync driver ack to its h/w */ - apic_write(APIC_EOI, APIC_EIO_ACK); /* Send EOI to Cobalt APIC */ - - spin_lock(&irq_controller_lock); - { - unsigned int status = desc->status & ~IRQ_INPROGRESS; - desc->status = status; - if (!(status & IRQ_DISABLED)) - enable_cobalt_irq(irq); - } - spin_unlock(&irq_controller_lock); +static void end_piix4_master_irq(unsigned int irq) +{ + unsigned long flags; + + spin_lock_irqsave(&cobalt_lock, flags); + enable_cobalt_irq(irq); + spin_unlock_irqrestore(&cobalt_lock, flags); } +static struct hw_interrupt_type piix4_master_irq_type = { + .typename = "PIIX4-master", + .startup = startup_piix4_master_irq, + .ack = ack_cobalt_irq, + .end = end_piix4_master_irq, +}; + + +static struct hw_interrupt_type piix4_virtual_irq_type = { + .typename = "PIIX4-virtual", + .startup = startup_8259A_irq, + .shutdown = disable_8259A_irq, + .enable = enable_8259A_irq, + .disable = disable_8259A_irq, +}; + + /* - * PIIX4-8259 master/virtual functions to handle: - * - * floppy - * parallel - * serial - * audio (?) + * PIIX4-8259 master/virtual functions to handle interrupt requests + * from legacy devices: floppy, parallel, serial, rtc. * * None of these get Cobalt APIC entries, neither do they have IDT * entries. These interrupts are purely virtual and distributed from @@ -250,161 +196,112 @@ * enable_irq gets the right irq. This 'master' irq is never directly * manipulated by any driver. */ - -static void startup_piix4_master_irq(unsigned int irq) +static void piix4_master_intr(int irq, void *dev_id, struct pt_regs * regs) { - /* ICW1 */ - outb(0x11, 0x20); - outb(0x11, 0xa0); + int realirq; + irq_desc_t *desc; + unsigned long flags; - /* ICW2 */ - outb(0x08, 0x21); - outb(0x70, 0xa1); + spin_lock_irqsave(&i8259A_lock, flags); - /* ICW3 */ - outb(0x04, 0x21); - outb(0x02, 0xa1); - - /* ICW4 */ - outb(0x01, 0x21); - outb(0x01, 0xa1); - - /* OCW1 - disable all interrupts in both 8259's */ - outb(0xff, 0x21); - outb(0xff, 0xa1); - - startup_cobalt_irq(irq); -} + /* Find out what's interrupting in the PIIX4 master 8259 */ + outb(0x0c, 0x20); /* OCW3 Poll command */ + realirq = inb(0x20); -static void shutdown_piix4_master_irq(unsigned int irq) -{ /* - * [we skip the 8259 magic here, not strictly necessary] + * Bit 7 == 0 means invalid/spurious */ + if (unlikely(!(realirq & 0x80))) + goto out_unlock; - shutdown_cobalt_irq(irq); -} - -static void do_piix4_master_IRQ(unsigned int irq, struct pt_regs * regs) -{ - int realirq, mask; + realirq &= 7; - /* Find out what's interrupting in the PIIX4 8259 */ + if (unlikely(realirq == 2)) { + outb(0x0c, 0xa0); + realirq = inb(0xa0); - spin_lock(&irq_controller_lock); - outb(0x0c, 0x20); /* OCW3 Poll command */ - realirq = inb(0x20); + if (unlikely(!(realirq & 0x80))) + goto out_unlock; - if (!(realirq & 0x80)) { - /* - * Bit 7 == 0 means invalid/spurious - */ - goto out_unlock; + realirq = (realirq & 7) + 8; } - realirq &= 0x7f; - /* - * mask and ack the 8259 - */ - mask = inb(0x21); - if ((mask >> realirq) & 0x01) - /* - * This IRQ is masked... ignore - */ - goto out_unlock; + /* mask and ack interrupt */ + cached_irq_mask |= 1 << realirq; + if (unlikely(realirq > 7)) { + inb(0xa1); + outb(cached_A1, 0xa1); + outb(0x60 + (realirq & 7), 0xa0); + outb(0x60 + 2, 0x20); + } else { + inb(0x21); + outb(cached_21, 0x21); + outb(0x60 + realirq, 0x20); + } - outb(mask | (1<action != NULL)) + handle_IRQ_event(realirq, regs, desc->action); + + if (!(desc->status & IRQ_DISABLED)) + enable_8259A_irq(realirq); - if (!(desc->status & IRQ_DISABLED)) - enable_piix4_virtual_irq(realirq); - } - spin_unlock(&irq_controller_lock); return; out_unlock: - spin_unlock(&irq_controller_lock); + spin_unlock_irqrestore(&i8259A_lock, flags); return; } -static void enable_piix4_virtual_irq(unsigned int irq) -{ - /* - * assumes this irq is one of the legacy devices - */ - - unsigned int mask = inb(0x21); - mask &= ~(1 << irq); - outb(mask, 0x21); - enable_cobalt_irq(irq); -} - -/* - * assumes this irq is one of the legacy devices - */ -static void disable_piix4_virtual_irq(unsigned int irq) -{ - unsigned int mask; - - disable_cobalt_irq(irq); +static struct irqaction master_action = { + .handler = piix4_master_intr, + .name = "PIIX4-8259", +}; - mask = inb(0x21); - mask &= ~(1 << irq); - outb(mask, 0x21); -} +static struct irqaction cascade_action = { + .handler = no_action, + .name = "cascade", +}; -static struct irqaction master_action = - { no_action, 0, 0, "PIIX4-8259", NULL, NULL }; void init_VISWS_APIC_irqs(void) { int i; - for (i = 0; i < 16; i++) { + for (i = 0; i < CO_IRQ_APIC0 + CO_APIC_LAST + 1; i++) { irq_desc[i].status = IRQ_DISABLED; irq_desc[i].action = 0; irq_desc[i].depth = 1; - /* - * Cobalt IRQs are mapped to standard ISA - * interrupt vectors: - */ - switch (i) { - /* - * Only CO_IRQ_8259 will be raised - * externally. - */ - case CO_IRQ_8259: + if (i == 0) { + irq_desc[i].handler = &cobalt_irq_type; + } + else if (i == CO_IRQ_IDE0) { + irq_desc[i].handler = &cobalt_irq_type; + } + else if (i == CO_IRQ_IDE1) { + irq_desc[i].handler = &cobalt_irq_type; + } + else if (i == CO_IRQ_8259) { irq_desc[i].handler = &piix4_master_irq_type; - break; - case CO_IRQ_FLOPPY: - case CO_IRQ_PARLL: + } + else if (i < CO_IRQ_APIC0) { irq_desc[i].handler = &piix4_virtual_irq_type; - break; - default: + } + else if (IS_CO_APIC(i)) { irq_desc[i].handler = &cobalt_irq_type; - break; } + irq_vector[i] = i + FIRST_EXTERNAL_VECTOR; } - /* - * The master interrupt is always present: - */ - setup_x86_irq(CO_IRQ_8259, &master_action); + setup_irq(CO_IRQ_8259, &master_action); + setup_irq(2, &cascade_action); } - diff -urN -X /usr/share/dontdiff linux-2.5.60.vanilla/include/asm-i386/mach-visws/irq_vectors.h linux-2.5.60/include/asm-i386/mach-visws/irq_vectors.h --- linux-2.5.60.vanilla/include/asm-i386/mach-visws/irq_vectors.h Thu Feb 13 20:31:38 2003 +++ linux-2.5.60/include/asm-i386/mach-visws/irq_vectors.h Thu Feb 13 20:58:11 2003 @@ -47,18 +47,8 @@ #define TIMER_IRQ 0 /* - * 16 8259A IRQ's, 208 potential APIC interrupt sources. - * Right now the APIC is mostly only used for SMP. - * 256 vectors is an architectural limit. (we can have - * more than 256 devices theoretically, but they will - * have to use shared interrupts) - * Since vectors 0x00-0x1f are used/reserved for the CPU, - * the usable vector space is 0x20-0xff (224 vectors) + * */ -#ifdef CONFIG_X86_IO_APIC #define NR_IRQS 224 -#else -#define NR_IRQS 16 -#endif #endif /* _ASM_IRQ_VECTORS_H */ diff -urN -X /usr/share/dontdiff linux-2.5.60.vanilla/include/asm-i386/mach-visws/setup_arch_post.h linux-2.5.60/include/asm-i386/mach-visws/setup_arch_post.h --- linux-2.5.60.vanilla/include/asm-i386/mach-visws/setup_arch_post.h Thu Feb 13 20:31:38 2003 +++ linux-2.5.60/include/asm-i386/mach-visws/setup_arch_post.h Thu Feb 13 20:42:02 2003 @@ -3,35 +3,47 @@ * This is included late in kernel/setup.c so that it can make use of all of * the static functions. */ +#define MB (1024 * 1024) + +unsigned long sgivwfb_mem_phys; +unsigned long sgivwfb_mem_size; + +long long mem_size __initdata = 0; + static inline char * __init machine_specific_memory_setup(void) { - char *who; + long long gfx_mem_size = 8 * MB; + mem_size = ALT_MEM_K; - who = "BIOS-e820"; + if (!mem_size) { + printk(KERN_WARNING "Bootloader didn't set memory size, upgrade it !\n"); + mem_size = 128 * MB; + } /* - * Try to copy the BIOS-supplied E820-map. - * - * Otherwise fake a memory map; one section from 0k->640k, - * the next section from 1mb->appropriate_mem_k + * this hardcodes the graphics memory to 8 MB + * it really should be sized dynamically (or at least + * set as a boot param) */ - sanitize_e820_map(E820_MAP, &E820_MAP_NR); - if (copy_e820_map(E820_MAP, E820_MAP_NR) < 0) { - unsigned long mem_size; - - /* compare results from other methods and take the greater */ - if (ALT_MEM_K < EXT_MEM_K) { - mem_size = EXT_MEM_K; - who = "BIOS-88"; - } else { - mem_size = ALT_MEM_K; - who = "BIOS-e801"; - } - - e820.nr_map = 0; - add_memory_region(0, LOWMEMSIZE(), E820_RAM); - add_memory_region(HIGH_MEMORY, mem_size << 10, E820_RAM); - } - return who; + if (!sgivwfb_mem_size) { + printk(KERN_WARNING "Defaulting to 8 MB framebuffer size\n"); + sgivwfb_mem_size = 8 * MB; + } + + /* + * Trim to nearest MB + */ + sgivwfb_mem_size &= ~((1 << 20) - 1); + sgivwfb_mem_phys = mem_size - gfx_mem_size; + + add_memory_region(0, LOWMEMSIZE(), E820_RAM); + add_memory_region(HIGH_MEMORY, mem_size - sgivwfb_mem_size - HIGH_MEMORY, E820_RAM); + add_memory_region(sgivwfb_mem_phys, sgivwfb_mem_size, E820_RESERVED); + + return "PROM"; + + /* Remove gcc warnings */ + (void) sanitize_e820_map(NULL, NULL); + (void) copy_e820_map(NULL, 0); } diff -urN -X /usr/share/dontdiff linux-2.5.60.vanilla/include/asm-i386/mach-visws/do_timer.h linux-2.5.60/include/asm-i386/mach-visws/do_timer.h --- linux-2.5.60.vanilla/include/asm-i386/mach-visws/do_timer.h Thu Feb 13 20:31:38 2003 +++ linux-2.5.60/include/asm-i386/mach-visws/do_timer.h Thu Feb 13 20:42:02 2003 @@ -1,7 +1,7 @@ /* defines for inline arch setup functions */ #include -#include +#include "cobalt.h" static inline void do_timer_interrupt_hook(struct pt_regs *regs) { --fKov5AqTsvseSZ0Z-- - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/