Date: Tue, 28 Jul 2015 08:24:47 -0400
From: Matt Porter <mporter@konsulko.com>
To: Teresa Remmet <t.remmet@phytec.de>
Cc: Igor Grinberg <grinberg@compulab.co.il>, linux-omap@vger.kernel.org,
        devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
        linux-kernel@vger.kernel.org, Mark Rutland <mark.rutland@arm.com>,
        Pawel Moll <pawel.moll@arm.com>,
        Ian Campbell <ijc+devicetree@hellion.org.uk>,
        Tony Lindgren <tony@atomide.com>, Rob Herring <robh+dt@kernel.org>,
        =?iso-8859-1?Q?Beno=EEt?= Cousson <bcousson@baylibre.com>,
        Kumar Gala <galak@codeaurora.org>
Subject: Re: [PATCH 1/2] ARM: dts: Add support for phyCORE-AM335x SoM
Message-ID: <20150728122447.GE15004@beef>
References: <1437035449-26956-1-git-send-email-t.remmet@phytec.de>
 <20150727143444.GD15004@beef>
 <55B73D6D.2040801@compulab.co.il>
 <1438073248.3649.6.camel@lws-tremmet.phytec.de>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <1438073248.3649.6.camel@lws-tremmet.phytec.de>
User-Agent: Mutt/1.5.23 (2014-03-12)
Sender: linux-kernel-owner@vger.kernel.org
Content-Length: 2571
Lines: 69

On Tue, Jul 28, 2015 at 10:47:28AM +0200, Teresa Remmet wrote:
> Hello Igor,
> 
> Am Dienstag, den 28.07.2015, 11:29 +0300 schrieb Igor Grinberg:
> > Hi Matt,
> > 
> > On 07/27/15 17:34, Matt Porter wrote:
> > > On Thu, Jul 16, 2015 at 10:30:48AM +0200, Teresa Remmet wrote:
> > >> phyCORE-AM335x is a SoM (System on Module) containing
> > >> a AM335x SOC. The module can be connected to different
> > >> carrier boards.
> > >>
> > >> Some hardware parts are configurable on the phyCORE-AM335x.
> > >> So they are disabled on default in this som dtsi file.
> > >> They will be enabled in the board dts files, when populated.
> > >>
> > >> * RAM up to 1GiB
> > >> * PMIC
> > >> * NAND flash up to 1GiB
> > >> * Eth PHY on SOM: 1x RMII
> > >> * SPI NOR flash 8MiB (optional)
> > >> * i2c RTC (optional)
> > >> * i2c EEPROM 4kiB (optional)
> > >>
> > >> Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
> > >> ---
> > >>  arch/arm/boot/dts/am335x-phycore-som.dtsi | 368 ++++++++++++++++++++++++++++++
> > >>  1 file changed, 368 insertions(+)
> > >>  create mode 100644 arch/arm/boot/dts/am335x-phycore-som.dtsi
> > >>
> > >> diff --git a/arch/arm/boot/dts/am335x-phycore-som.dtsi b/arch/arm/boot/dts/am335x-phycore-som.dtsi
> > >> new file mode 100644
> > >> index 0000000..4d28fc3
> > >> --- /dev/null
> > >> +++ b/arch/arm/boot/dts/am335x-phycore-som.dtsi
> > 
> > [...]
> > 
> > >> +#include "am33xx.dtsi"
> > >> +
> > >> +/ {
> > >> +	model = "Phytec AM335x phyCORE";
> > >> +	compatible = "phytec,am335x-phycore-som", "ti,am33xx";
> > > 
> > > One minor thing here...wildcards in compatible strings aren't permitted.
> > > However, family compatibles like "ti,am33xx" that came in before this
> > > was enforced are grandfathered. Ideally, the newly introced board/som
> > > specific strings should not propagate that wildcard. i.e. something
> > > like "phytec,am3352-phycore-som" or whatever is the base family part
> > > on these SOMs.
> > > 
> > 
> > I'm not sure this is wild card.
> > I tend to think that it is the real name of the som [1], no?
> > 
> > http://phytec.com/products/system-on-modules/phycore/am335x/
> 
> Yes, your right. This is the name of the SoM. The phyCORE may have
> different am335x versions mounted. So there is not the one am3352 or
> am3359 always used.

Ok, great. Disregard then.

-Matt
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/