Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752590AbbG1MwB (ORCPT ); Tue, 28 Jul 2015 08:52:01 -0400 Received: from eddie.linux-mips.org ([148.251.95.138]:41456 "EHLO cvs.linux-mips.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1750859AbbG1Mv7 (ORCPT ); Tue, 28 Jul 2015 08:51:59 -0400 Date: Tue, 28 Jul 2015 14:51:49 +0200 From: Ralf Baechle To: Bert Vermeulen , juhosg@openwrt.org Cc: sameo@linux.intel.com, lee.jones@linaro.org, linux-mips@linux-mips.org, linux-kernel@vger.kernel.org Subject: Re: [PATCH] mfd: Add support for CPLD chip on Mikrotik RB4xx boards Message-ID: <20150728125149.GE24049@linux-mips.org> References: <1428285076-14269-1-git-send-email-bert@biot.com> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <1428285076-14269-1-git-send-email-bert@biot.com> User-Agent: Mutt/1.5.23 (2014-03-12) Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 11921 Lines: 406 I still have this patch sitting in patchwork [1] waiting for a replacement that doesn't seem to have been posted yet. And it's also not arch code so I'm dropping it Ralf [1] http://patchwork.linux-mips.org/patch/9716/ On Mon, Apr 06, 2015 at 03:51:16AM +0200, Bert Vermeulen wrote: > Date: Mon, 6 Apr 2015 03:51:16 +0200 > From: Bert Vermeulen > To: ralf@linux-mips.org, sameo@linux.intel.com, lee.jones@linaro.org, > linux-mips@linux-mips.org, linux-kernel@vger.kernel.org > Cc: Bert Vermeulen > Subject: [PATCH] mfd: Add support for CPLD chip on Mikrotik RB4xx boards > > The SPI-connected CPLD chip controls access to the main NAND flash > chip and five LEDs. > > Signed-off-by: Bert Vermeulen > --- > arch/mips/include/asm/mach-ath79/rb4xx_cpld.h | 49 +++++ > drivers/mfd/Kconfig | 7 + > drivers/mfd/Makefile | 1 + > drivers/mfd/rb4xx-cpld.c | 279 ++++++++++++++++++++++++++ > 4 files changed, 336 insertions(+) > create mode 100644 arch/mips/include/asm/mach-ath79/rb4xx_cpld.h > create mode 100644 drivers/mfd/rb4xx-cpld.c > > diff --git a/arch/mips/include/asm/mach-ath79/rb4xx_cpld.h b/arch/mips/include/asm/mach-ath79/rb4xx_cpld.h > new file mode 100644 > index 0000000..40c109c > --- /dev/null > +++ b/arch/mips/include/asm/mach-ath79/rb4xx_cpld.h > @@ -0,0 +1,49 @@ > +/* > + * SPI driver definitions for the CPLD chip on the Mikrotik RB4xx boards > + * > + * Copyright (C) 2010 Gabor Juhos > + * > + * This file was based on the patches for Linux 2.6.27.39 published by > + * MikroTik for their RouterBoard 4xx series devices. > + * > + * This program is free software; you can redistribute it and/or modify it > + * under the terms of the GNU General Public License version 2 as published > + * by the Free Software Foundation. > + */ > + > +#define CPLD_GPIO_LED1 0 > +#define CPLD_GPIO_LED2 1 > +#define CPLD_GPIO_LED3 2 > +#define CPLD_GPIO_LED4 3 > +#define CPLD_GPIO_FAN 4 > +#define CPLD_GPIO_ALE 5 > +#define CPLD_GPIO_CLE 6 > +#define CPLD_GPIO_nCE 7 > +#define CPLD_GPIO_LED5 8 > + > +#define CPLD_NUM_GPIOS 9 > + > +#define CPLD_CFG_LED1 BIT(CPLD_GPIO_LED1) > +#define CPLD_CFG_LED2 BIT(CPLD_GPIO_LED2) > +#define CPLD_CFG_LED3 BIT(CPLD_GPIO_LED3) > +#define CPLD_CFG_LED4 BIT(CPLD_GPIO_LED4) > +#define CPLD_CFG_FAN BIT(CPLD_GPIO_FAN) > +#define CPLD_CFG_ALE BIT(CPLD_GPIO_ALE) > +#define CPLD_CFG_CLE BIT(CPLD_GPIO_CLE) > +#define CPLD_CFG_nCE BIT(CPLD_GPIO_nCE) > +#define CPLD_CFG_LED5 BIT(CPLD_GPIO_LED5) > + > +#define CPLD_CMD_WRITE_NAND 0x08 /* send cmd, n x send data, send idle */ > +#define CPLD_CMD_WRITE_CFG 0x09 /* send cmd, n x send cfg */ > +#define CPLD_CMD_READ_NAND 0x0a /* send cmd, send idle, n x read data */ > +#define CPLD_CMD_READ_FAST 0x0b /* send cmd, 4 x idle, n x read data */ > +#define CPLD_CMD_LED5_ON 0x0c /* send cmd */ > +#define CPLD_CMD_LED5_OFF 0x0d /* send cmd */ > + > +struct rb4xx_cpld_platform_data { > + unsigned gpio_base; > +}; > + > +extern int rb4xx_cpld_read(struct spi_device *spi, unsigned char *rx_buf, > + unsigned len); > +extern int rb4xx_cpld_write(struct spi_device *spi, const u8 *buf, int len); > diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig > index 38356e3..c4a6a4e 100644 > --- a/drivers/mfd/Kconfig > +++ b/drivers/mfd/Kconfig > @@ -631,6 +631,13 @@ config MFD_SPMI_PMIC > Say M here if you want to include support for the SPMI PMIC > series as a module. The module will be called "qcom-spmi-pmic". > > +config MFD_RB4XX_CPLD > + tristate "MikroTik RB4XX CPLD driver" > + depends on ATH79 && SPI_RB4XX > + help > + Driver for the CPLD chip present on MikroTik RB4xx boards. > + It controls CPU access to NAND flash and user LEDs. > + > config MFD_RDC321X > tristate "RDC R-321x southbridge" > select MFD_CORE > diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile > index 19f3d74..6cc9fe3 100644 > --- a/drivers/mfd/Makefile > +++ b/drivers/mfd/Makefile > @@ -155,6 +155,7 @@ obj-$(CONFIG_MFD_OMAP_USB_HOST) += omap-usb-host.o omap-usb-tll.o > obj-$(CONFIG_MFD_PM8921_CORE) += pm8921-core.o ssbi.o > obj-$(CONFIG_MFD_QCOM_RPM) += qcom_rpm.o > obj-$(CONFIG_MFD_SPMI_PMIC) += qcom-spmi-pmic.o > +obj-$(CONFIG_MFD_RB4XX_CPLD) += rb4xx-cpld.o > obj-$(CONFIG_TPS65911_COMPARATOR) += tps65911-comparator.o > obj-$(CONFIG_MFD_TPS65090) += tps65090.o > obj-$(CONFIG_MFD_AAT2870_CORE) += aat2870-core.o > diff --git a/drivers/mfd/rb4xx-cpld.c b/drivers/mfd/rb4xx-cpld.c > new file mode 100644 > index 0000000..0f8de62 > --- /dev/null > +++ b/drivers/mfd/rb4xx-cpld.c > @@ -0,0 +1,279 @@ > +/* > + * SPI driver for the CPLD chip on the Mikrotik RB4xx boards > + * > + * Copyright (C) 2010 Gabor Juhos > + * > + * This file was based on the patches for Linux 2.6.27.39 published by > + * MikroTik for their RouterBoard 4xx series devices. > + * > + * This program is free software; you can redistribute it and/or modify it > + * under the terms of the GNU General Public License version 2 as published > + * by the Free Software Foundation. > + */ > + > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > + > +#include > + > +struct rb4xx_cpld { > + struct spi_device *spi; > + struct mutex lock; > + struct gpio_chip chip; > + unsigned int config; > +}; > + > +static inline struct rb4xx_cpld *gpio_to_cpld(struct gpio_chip *chip) > +{ > + return container_of(chip, struct rb4xx_cpld, chip); > +} > + > +static int rb4xx_cpld_write_cmd(struct rb4xx_cpld *cpld, unsigned char cmd) > +{ > + struct spi_transfer t[1]; > + struct spi_message m; > + unsigned char tx_buf[1]; > + int err; > + > + spi_message_init(&m); > + memset(&t, 0, sizeof(t)); > + > + t[0].tx_buf = tx_buf; > + t[0].len = sizeof(tx_buf); > + spi_message_add_tail(&t[0], &m); > + > + tx_buf[0] = cmd; > + > + err = spi_sync(cpld->spi, &m); > + return err; > +} > + > +static int rb4xx_cpld_write_cfg(struct rb4xx_cpld *cpld, unsigned char config) > +{ > + struct spi_transfer t[1]; > + struct spi_message m; > + unsigned char cmd[2]; > + int err; > + > + spi_message_init(&m); > + memset(&t, 0, sizeof(t)); > + > + t[0].tx_buf = cmd; > + t[0].len = sizeof(cmd); > + spi_message_add_tail(&t[0], &m); > + > + cmd[0] = CPLD_CMD_WRITE_CFG; > + cmd[1] = config; > + > + err = spi_sync(cpld->spi, &m); > + return err; > +} > + > +static int rb4xx_cpld_change_cfg(struct rb4xx_cpld *cpld, u32 mask, u32 value) > +{ > + unsigned int config; > + int err; > + > + config = cpld->config & ~mask; > + config |= value; > + > + if ((cpld->config ^ config) & 0xff) { > + err = rb4xx_cpld_write_cfg(cpld, config); > + if (err) > + return err; > + } > + > + if ((cpld->config ^ config) & CPLD_CFG_LED5) { > + err = rb4xx_cpld_write_cmd(cpld, (value) ? CPLD_CMD_LED5_ON : > + CPLD_CMD_LED5_OFF); > + if (err) > + return err; > + } > + > + cpld->config = config; > + return 0; > +} > + > +int rb4xx_cpld_read(struct spi_device *spi, unsigned char *rx_buf, unsigned len) > +{ > + struct spi_message m; > + static const unsigned char cmd[2] = { CPLD_CMD_READ_NAND, 0 }; > + struct spi_transfer t[2] = { > + { > + .tx_buf = &cmd, > + .len = 2, > + }, { > + .rx_buf = rx_buf, > + .len = len, > + }, > + }; > + > + spi_message_init(&m); > + spi_message_add_tail(&t[0], &m); > + spi_message_add_tail(&t[1], &m); > + return spi_sync(spi, &m); > +} > +EXPORT_SYMBOL_GPL(rb4xx_cpld_read); > + > +/* The cs_change flag indicates to the spi-rb4xx driver to use "fast mode". */ > +int rb4xx_cpld_write(struct spi_device *spi, const u8 *buf, int len) > +{ > + struct spi_message m; > + static const unsigned char cmd = CPLD_CMD_WRITE_NAND; > + static const unsigned char dummy = 0x00; > + struct spi_transfer t[3] = { > + { > + .tx_buf = &cmd, > + .len = 1, > + }, { > + .tx_buf = buf, > + .len = len, > + .cs_change = 1, > + }, { > + .tx_buf = &dummy, > + .len = 1, > + .cs_change = 1, > + }, > + }; > + > + spi_message_init(&m); > + spi_message_add_tail(&t[0], &m); > + spi_message_add_tail(&t[1], &m); > + spi_message_add_tail(&t[2], &m); > + return spi_sync(spi, &m); > +} > +EXPORT_SYMBOL_GPL(rb4xx_cpld_write); > + > +static int rb4xx_cpld_gpio_get(struct gpio_chip *chip, unsigned offset) > +{ > + struct rb4xx_cpld *cpld = gpio_to_cpld(chip); > + int ret; > + > + mutex_lock(&cpld->lock); > + ret = (cpld->config >> offset) & 1; > + mutex_unlock(&cpld->lock); > + > + return ret; > +} > + > +static void rb4xx_cpld_gpio_set(struct gpio_chip *chip, > + unsigned offset, int value) > +{ > + struct rb4xx_cpld *cpld = gpio_to_cpld(chip); > + > + mutex_lock(&cpld->lock); > + rb4xx_cpld_change_cfg(cpld, (1 << offset), !!value << offset); > + mutex_unlock(&cpld->lock); > +} > + > +static int rb4xx_cpld_gpio_direction_input(struct gpio_chip *chip, > + unsigned offset) > +{ > + return -EOPNOTSUPP; > +} > + > +static int rb4xx_cpld_gpio_direction_output(struct gpio_chip *chip, > + unsigned offset, int value) > +{ > + struct rb4xx_cpld *cpld = gpio_to_cpld(chip); > + int ret; > + > + mutex_lock(&cpld->lock); > + ret = rb4xx_cpld_change_cfg(cpld, (1 << offset), !!value << offset); > + mutex_unlock(&cpld->lock); > + > + return ret; > +} > + > +static int rb4xx_cpld_gpio_init(struct rb4xx_cpld *cpld, unsigned int base) > +{ > + int err; > + > + cpld->chip.label = "rb4xx-cpld"; > + cpld->chip.base = base; > + cpld->chip.ngpio = CPLD_NUM_GPIOS; > + cpld->chip.can_sleep = 1; > + cpld->chip.dev = &cpld->spi->dev; > + cpld->chip.owner = THIS_MODULE; > + cpld->chip.get = rb4xx_cpld_gpio_get; > + cpld->chip.set = rb4xx_cpld_gpio_set; > + cpld->chip.direction_input = rb4xx_cpld_gpio_direction_input; > + cpld->chip.direction_output = rb4xx_cpld_gpio_direction_output; > + > + err = gpiochip_add(&cpld->chip); > + if (err) > + dev_err(&cpld->spi->dev, "adding GPIO chip failed, error %d\n", > + err); > + > + return err; > +} > + > +static int rb4xx_cpld_probe(struct spi_device *spi) > +{ > + struct rb4xx_cpld *cpld; > + struct rb4xx_cpld_platform_data *pdata; > + int err; > + > + pdata = spi->dev.platform_data; > + if (!pdata) { > + dev_dbg(&spi->dev, "no platform data\n"); > + return -EINVAL; > + } > + > + cpld = devm_kzalloc(&spi->dev, sizeof(*cpld), GFP_KERNEL); > + if (!cpld) > + return -ENOMEM; > + > + mutex_init(&cpld->lock); > + cpld->spi = spi_dev_get(spi); > + dev_set_drvdata(&spi->dev, cpld); > + > + spi->mode = SPI_MODE_0; > + err = spi_setup(spi); > + if (err) { > + dev_err(&spi->dev, "SPI setup failed, error %d\n", err); > + return err; > + } > + > + err = rb4xx_cpld_gpio_init(cpld, pdata->gpio_base); > + if (err) > + return err; > + > + return 0; > +} > + > +static int rb4xx_cpld_remove(struct spi_device *spi) > +{ > + struct rb4xx_cpld_platform_data *pdata; > + struct rb4xx_cpld *cpld; > + > + pdata = spi->dev.platform_data; > + cpld = dev_get_drvdata(&spi->dev); > + mutex_destroy(&cpld->lock); > + > + return 0; > +} > + > +static struct spi_driver rb4xx_cpld_driver = { > + .probe = rb4xx_cpld_probe, > + .remove = rb4xx_cpld_remove, > + .driver = { > + .name = "rb4xx-cpld", > + .bus = &spi_bus_type, > + .owner = THIS_MODULE, > + }, > +}; > + > +module_spi_driver(rb4xx_cpld_driver); > + > +MODULE_DESCRIPTION("RB4xx CPLD driver"); > +MODULE_AUTHOR("Gabor Juhos "); > +MODULE_LICENSE("GPL v2"); > -- > 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/