Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S932292AbbG1NkP (ORCPT ); Tue, 28 Jul 2015 09:40:15 -0400 Received: from bear.ext.ti.com ([192.94.94.41]:44979 "EHLO bear.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752295AbbG1NkL (ORCPT ); Tue, 28 Jul 2015 09:40:11 -0400 From: Kishon Vijay Abraham I To: , , , , , , CC: , , , , , , , , Subject: [PATCH 1/2] pci: host: pci-dra7xx: Add support to make gpio drive PERST# line Date: Tue, 28 Jul 2015 19:09:09 +0530 Message-ID: <1438090750-11604-2-git-send-email-kishon@ti.com> X-Mailer: git-send-email 1.7.9.5 In-Reply-To: <1438090750-11604-1-git-send-email-kishon@ti.com> References: <1438090750-11604-1-git-send-email-kishon@ti.com> MIME-Version: 1.0 Content-Type: text/plain Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 3028 Lines: 94 The PERST# line in am57x-evm is connected to a gpio line and PERST# should be driven high to indicate the clocks are stable (As per Figure 2-10: Power Up of the PCIe CEM spec 3.0). Add support in pci-dra7xx driver to make gpio drive PERST# line here. Signed-off-by: Kishon Vijay Abraham I --- Documentation/devicetree/bindings/pci/ti-pci.txt | 3 +++ drivers/pci/host/pci-dra7xx.c | 24 ++++++++++++++++++++-- 2 files changed, 25 insertions(+), 2 deletions(-) diff --git a/Documentation/devicetree/bindings/pci/ti-pci.txt b/Documentation/devicetree/bindings/pci/ti-pci.txt index 3d21791..60e2516 100644 --- a/Documentation/devicetree/bindings/pci/ti-pci.txt +++ b/Documentation/devicetree/bindings/pci/ti-pci.txt @@ -23,6 +23,9 @@ PCIe Designware Controller interrupt-map-mask, interrupt-map : as specified in ../designware-pcie.txt +Optional Property: + - gpios : Should be added if a gpio line is required to drive PERST# line + Example: axi { compatible = "simple-bus"; diff --git a/drivers/pci/host/pci-dra7xx.c b/drivers/pci/host/pci-dra7xx.c index 7acc833..d3d0faf 100644 --- a/drivers/pci/host/pci-dra7xx.c +++ b/drivers/pci/host/pci-dra7xx.c @@ -17,6 +17,7 @@ #include #include #include +#include #include #include #include @@ -336,6 +337,9 @@ static int __init dra7xx_pcie_probe(struct platform_device *pdev) struct device *dev = &pdev->dev; struct device_node *np = dev->of_node; char name[10]; + int gpio_sel; + enum of_gpio_flags flags; + unsigned long gpio_flags; dra7xx = devm_kzalloc(dev, sizeof(*dra7xx), GFP_KERNEL); if (!dra7xx) @@ -398,6 +402,22 @@ static int __init dra7xx_pcie_probe(struct platform_device *pdev) goto err_get_sync; } + gpio_sel = of_get_gpio_flags(dev->of_node, 0, &flags); + if (gpio_is_valid(gpio_sel)) { + gpio_flags = (flags & OF_GPIO_ACTIVE_LOW) ? + GPIOF_OUT_INIT_LOW : GPIOF_OUT_INIT_HIGH; + ret = devm_gpio_request_one(dev, gpio_sel, gpio_flags, + "pcie_reset"); + if (ret) { + dev_err(&pdev->dev, "gpio%d request failed, ret %d\n", + gpio_sel, ret); + goto err_gpio; + } + } else if (gpio_sel == -EPROBE_DEFER) { + ret = -EPROBE_DEFER; + goto err_gpio; + } + reg = dra7xx_pcie_readl(dra7xx, PCIECTRL_DRA7XX_CONF_DEVICE_CMD); reg &= ~LTSSM_EN; dra7xx_pcie_writel(dra7xx, PCIECTRL_DRA7XX_CONF_DEVICE_CMD, reg); @@ -406,11 +426,11 @@ static int __init dra7xx_pcie_probe(struct platform_device *pdev) ret = dra7xx_add_pcie_port(dra7xx, pdev); if (ret < 0) - goto err_add_port; + goto err_gpio; return 0; -err_add_port: +err_gpio: pm_runtime_put(dev); err_get_sync: -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/