Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754969AbbG3RJY (ORCPT ); Thu, 30 Jul 2015 13:09:24 -0400 Received: from mail-wi0-f169.google.com ([209.85.212.169]:37765 "EHLO mail-wi0-f169.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754921AbbG3RJU (ORCPT ); Thu, 30 Jul 2015 13:09:20 -0400 From: Peter Griffin To: linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, srinivas.kandagatla@gmail.com, maxime.coquelin@st.com, patrice.chotard@st.com, mchehab@osg.samsung.com, m.krufky@samsung.com Cc: peter.griffin@linaro.org, lee.jones@linaro.org, hugues.fruchet@st.com, linux-media@vger.kernel.org, devicetree@vger.kernel.org, joe@perches.com Subject: [PATCH v2 06/11] [media] c8sectpfe: STiH407/10 Linux DVB demux support Date: Thu, 30 Jul 2015 18:08:56 +0100 Message-Id: <1438276141-16902-7-git-send-email-peter.griffin@linaro.org> X-Mailer: git-send-email 1.9.1 In-Reply-To: <1438276141-16902-1-git-send-email-peter.griffin@linaro.org> References: <1438276141-16902-1-git-send-email-peter.griffin@linaro.org> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 44897 Lines: 1563 This patch adds support for the c8sectpfe input HW found on STiH407/410 SoC's. It currently supports the TS input block, memdma engine and hw PID filtering blocks of the C8SECTPFE subsystem. The driver creates one LinuxDVB adapter, and a demux/dvr/frontend set of devices for each tsin channel which is specificed in the DT. It has been tested with multiple tsin channels tuned, locked, and grabbing TS simultaneously. Signed-off-by: Peter Griffin --- .../media/platform/sti/c8sectpfe/c8sectpfe-core.c | 1235 ++++++++++++++++++++ .../media/platform/sti/c8sectpfe/c8sectpfe-core.h | 288 +++++ 2 files changed, 1523 insertions(+) create mode 100644 drivers/media/platform/sti/c8sectpfe/c8sectpfe-core.c create mode 100644 drivers/media/platform/sti/c8sectpfe/c8sectpfe-core.h diff --git a/drivers/media/platform/sti/c8sectpfe/c8sectpfe-core.c b/drivers/media/platform/sti/c8sectpfe/c8sectpfe-core.c new file mode 100644 index 0000000..3a91093 --- /dev/null +++ b/drivers/media/platform/sti/c8sectpfe/c8sectpfe-core.c @@ -0,0 +1,1235 @@ +/* + * c8sectpfe-core.c - C8SECTPFE STi DVB driver + * + * Copyright (c) STMicroelectronics 2015 + * + * Author:Peter Bennett + * Peter Griffin + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "c8sectpfe-core.h" +#include "c8sectpfe-common.h" +#include "c8sectpfe-debugfs.h" +#include "dmxdev.h" +#include "dvb_demux.h" +#include "dvb_frontend.h" +#include "dvb_net.h" + +#define FIRMWARE_MEMDMA "pti_memdma_h407.elf" +MODULE_FIRMWARE(FIRMWARE_MEMDMA); + +#define PID_TABLE_SIZE 1024 +#define POLL_MSECS 50 + +static int load_c8sectpfe_fw_step1(struct c8sectpfei *fei); + +#define TS_PKT_SIZE 188 +#define HEADER_SIZE (4) +#define PACKET_SIZE (TS_PKT_SIZE+HEADER_SIZE) + +#define FEI_ALIGNMENT (32) +/* hw requires minimum of 8*PACKET_SIZE and padded to 8byte boundary */ +#define FEI_BUFFER_SIZE (8*PACKET_SIZE*340) + +#define FIFO_LEN 1024 + +static void c8sectpfe_timer_interrupt(unsigned long ac8sectpfei) +{ + struct c8sectpfei *fei = (struct c8sectpfei *)ac8sectpfei; + struct channel_info *channel; + int chan_num; + + /* iterate through input block channels */ + for (chan_num = 0; chan_num < fei->tsin_count; chan_num++) { + channel = fei->channel_data[chan_num]; + + /* is this descriptor initialised and TP enabled */ + if (channel->irec && readl(channel->irec + DMA_PRDS_TPENABLE)) + tasklet_schedule(&channel->tsklet); + } + + fei->timer.expires = jiffies + msecs_to_jiffies(POLL_MSECS); + add_timer(&fei->timer); +} + +static void channel_swdemux_tsklet(unsigned long data) +{ + struct channel_info *channel = (struct channel_info *)data; + struct c8sectpfei *fei = channel->fei; + unsigned long wp, rp; + int pos, num_packets, n, size; + u8 *buf; + + if (unlikely(!channel || !channel->irec)) + return; + + wp = readl(channel->irec + DMA_PRDS_BUSWP_TP(0)); + rp = readl(channel->irec + DMA_PRDS_BUSRP_TP(0)); + + pos = rp - channel->back_buffer_busaddr; + + /* has it wrapped */ + if (wp < rp) + wp = channel->back_buffer_busaddr + FEI_BUFFER_SIZE; + + size = wp - rp; + num_packets = size / PACKET_SIZE; + + /* manage cache so data is visible to CPU */ + dma_sync_single_for_cpu(fei->dev, + rp, + size, + DMA_FROM_DEVICE); + + buf = (u8 *) channel->back_buffer_aligned; + + dev_dbg(fei->dev, + "chan=%d channel=%p num_packets = %d, buf = %p, pos = 0x%x\n\t" + "rp=0x%lx, wp=0x%lx\n", + channel->tsin_id, channel, num_packets, buf, pos, rp, wp); + + for (n = 0; n < num_packets; n++) { + dvb_dmx_swfilter_packets( + &fei->c8sectpfe[0]-> + demux[channel->demux_mapping].dvb_demux, + &buf[pos], 1); + + pos += PACKET_SIZE; + } + + /* advance the read pointer */ + if (wp == (channel->back_buffer_busaddr + FEI_BUFFER_SIZE)) + writel(channel->back_buffer_busaddr, channel->irec + + DMA_PRDS_BUSRP_TP(0)); + else + writel(wp, channel->irec + DMA_PRDS_BUSWP_TP(0)); +} + +static int c8sectpfe_start_feed(struct dvb_demux_feed *dvbdmxfeed) +{ + struct dvb_demux *demux = dvbdmxfeed->demux; + struct stdemux *stdemux = (struct stdemux *)demux->priv; + struct c8sectpfei *fei = stdemux->c8sectpfei; + struct channel_info *channel; + u32 tmp; + unsigned long *bitmap; + + switch (dvbdmxfeed->type) { + case DMX_TYPE_TS: + break; + case DMX_TYPE_SEC: + break; + default: + dev_err(fei->dev, "%s:%d Error bailing\n" + , __func__, __LINE__); + return -EINVAL; + } + + if (dvbdmxfeed->type == DMX_TYPE_TS) { + switch (dvbdmxfeed->pes_type) { + case DMX_PES_VIDEO: + case DMX_PES_AUDIO: + case DMX_PES_TELETEXT: + case DMX_PES_PCR: + case DMX_PES_OTHER: + break; + default: + dev_err(fei->dev, "%s:%d Error bailing\n" + , __func__, __LINE__); + return -EINVAL; + } + } + + if (!atomic_read(&fei->fw_loaded)) { + dev_err(fei->dev, "%s: c8sectpfe fw not loaded\n", __func__); + return -EINVAL; + } + + mutex_lock(&fei->lock); + + channel = fei->channel_data[stdemux->tsin_index]; + + bitmap = (unsigned long *) channel->pid_buffer_aligned; + + /* 8192 is a special PID */ + if (dvbdmxfeed->pid == 8192) { + tmp = readl(fei->io + C8SECTPFE_IB_PID_SET(channel->tsin_id)); + tmp &= ~C8SECTPFE_PID_ENABLE; + writel(tmp, fei->io + C8SECTPFE_IB_PID_SET(channel->tsin_id)); + + } else { + bitmap_set(bitmap, dvbdmxfeed->pid, 1); + } + + /* manage cache so PID bitmap is visible to HW */ + dma_sync_single_for_device(fei->dev, + channel->pid_buffer_busaddr, + PID_TABLE_SIZE, + DMA_TO_DEVICE); + + channel->active = 1; + + if (fei->global_feed_count == 0) { + fei->timer.expires = jiffies + + msecs_to_jiffies(msecs_to_jiffies(POLL_MSECS)); + + add_timer(&fei->timer); + } + + if (stdemux->running_feed_count == 0) { + + dev_dbg(fei->dev, "Starting channel=%p\n", channel); + + tasklet_init(&channel->tsklet, channel_swdemux_tsklet, + (unsigned long) channel); + + /* Reset the internal inputblock sram pointers */ + writel(channel->fifo, + fei->io + C8SECTPFE_IB_BUFF_STRT(channel->tsin_id)); + writel(channel->fifo + FIFO_LEN - 1, + fei->io + C8SECTPFE_IB_BUFF_END(channel->tsin_id)); + + writel(channel->fifo, + fei->io + C8SECTPFE_IB_READ_PNT(channel->tsin_id)); + writel(channel->fifo, + fei->io + C8SECTPFE_IB_WRT_PNT(channel->tsin_id)); + + + /* reset read / write memdma ptrs for this channel */ + writel(channel->back_buffer_busaddr, channel->irec + + DMA_PRDS_BUSBASE_TP(0)); + + tmp = channel->back_buffer_busaddr + FEI_BUFFER_SIZE - 1; + writel(tmp, channel->irec + DMA_PRDS_BUSTOP_TP(0)); + + writel(channel->back_buffer_busaddr, channel->irec + + DMA_PRDS_BUSWP_TP(0)); + + /* Issue a reset and enable InputBlock */ + writel(C8SECTPFE_SYS_ENABLE | C8SECTPFE_SYS_RESET + , fei->io + C8SECTPFE_IB_SYS(channel->tsin_id)); + + /* and enable the tp */ + writel(0x1, channel->irec + DMA_PRDS_TPENABLE); + + dev_dbg(fei->dev, "%s:%d Starting DMA feed on stdemux=%p\n" + , __func__, __LINE__, stdemux); + } + + stdemux->running_feed_count++; + fei->global_feed_count++; + + mutex_unlock(&fei->lock); + + return 0; +} + +static int c8sectpfe_stop_feed(struct dvb_demux_feed *dvbdmxfeed) +{ + + struct dvb_demux *demux = dvbdmxfeed->demux; + struct stdemux *stdemux = (struct stdemux *)demux->priv; + struct c8sectpfei *fei = stdemux->c8sectpfei; + struct channel_info *channel; + int idlereq; + u32 tmp; + int ret; + unsigned long *bitmap; + + if (!atomic_read(&fei->fw_loaded)) { + dev_err(fei->dev, "%s: c8sectpfe fw not loaded\n", __func__); + return -EINVAL; + } + + mutex_lock(&fei->lock); + + channel = fei->channel_data[stdemux->tsin_index]; + + bitmap = (unsigned long *) channel->pid_buffer_aligned; + + if (dvbdmxfeed->pid == 8192) { + tmp = readl(fei->io + C8SECTPFE_IB_PID_SET(channel->tsin_id)); + tmp |= C8SECTPFE_PID_ENABLE; + writel(tmp, fei->io + C8SECTPFE_IB_PID_SET(channel->tsin_id)); + } else { + bitmap_clear(bitmap, dvbdmxfeed->pid, 1); + } + + /* manage cache so data is visible to HW */ + dma_sync_single_for_device(fei->dev, + channel->pid_buffer_busaddr, + PID_TABLE_SIZE, + DMA_TO_DEVICE); + + if (--stdemux->running_feed_count == 0) { + + channel = fei->channel_data[stdemux->tsin_index]; + + /* TP re-configuration on page 168 of functional spec */ + + /* disable IB (prevents more TS data going to memdma) */ + writel(0, fei->io + C8SECTPFE_IB_SYS(channel->tsin_id)); + + /* disable this channels descriptor */ + writel(0, channel->irec + DMA_PRDS_TPENABLE); + + tasklet_disable(&channel->tsklet); + + /* now request memdma channel goes idle */ + idlereq = (1 << channel->tsin_id) | IDLEREQ; + writel(idlereq, fei->io + DMA_IDLE_REQ); + + /* wait for idle irq handler to signal completion */ + ret = wait_for_completion_timeout(&channel->idle_completion, + msecs_to_jiffies(100)); + + if (ret == 0) + dev_warn(fei->dev, + "Timeout waiting for idle irq on tsin%d\n", + channel->tsin_id); + + reinit_completion(&channel->idle_completion); + + /* reset read / write ptrs for this channel */ + + writel(channel->back_buffer_busaddr, + channel->irec + DMA_PRDS_BUSBASE_TP(0)); + + tmp = channel->back_buffer_busaddr + FEI_BUFFER_SIZE - 1; + writel(tmp, channel->irec + DMA_PRDS_BUSTOP_TP(0)); + + writel(channel->back_buffer_busaddr, + channel->irec + DMA_PRDS_BUSWP_TP(0)); + + dev_dbg(fei->dev, + "%s:%d stopping DMA feed on stdemux=%p channel=%d\n", + __func__, __LINE__, stdemux, channel->tsin_id); + + /* turn off all PIDS in the bitmap */ + memset((void *)channel->pid_buffer_aligned + , 0x00, PID_TABLE_SIZE); + + /* manage cache so data is visible to HW */ + dma_sync_single_for_device(fei->dev, + channel->pid_buffer_busaddr, + PID_TABLE_SIZE, + DMA_TO_DEVICE); + + channel->active = 0; + } + + if (--fei->global_feed_count == 0) { + dev_dbg(fei->dev, "%s:%d global_feed_count=%d\n" + , __func__, __LINE__, fei->global_feed_count); + + del_timer(&fei->timer); + } + + mutex_unlock(&fei->lock); + + return 0; +} + +static struct channel_info *find_channel(struct c8sectpfei *fei, int tsin_num) +{ + int i; + + for (i = 0; i < C8SECTPFE_MAXCHANNEL; i++) { + if (!fei->channel_data[i]) + continue; + + if (fei->channel_data[i]->tsin_id == tsin_num) + return fei->channel_data[i]; + } + + return NULL; +} + +static void c8sectpfe_getconfig(struct c8sectpfei *fei) +{ + struct c8sectpfe_hw *hw = &fei->hw_stats; + + hw->num_ib = readl(fei->io + SYS_CFG_NUM_IB); + hw->num_mib = readl(fei->io + SYS_CFG_NUM_MIB); + hw->num_swts = readl(fei->io + SYS_CFG_NUM_SWTS); + hw->num_tsout = readl(fei->io + SYS_CFG_NUM_TSOUT); + hw->num_ccsc = readl(fei->io + SYS_CFG_NUM_CCSC); + hw->num_ram = readl(fei->io + SYS_CFG_NUM_RAM); + hw->num_tp = readl(fei->io + SYS_CFG_NUM_TP); + + dev_info(fei->dev, "C8SECTPFE hw supports the following:\n"); + dev_info(fei->dev, "Input Blocks: %d\n", hw->num_ib); + dev_info(fei->dev, "Merged Input Blocks: %d\n", hw->num_mib); + dev_info(fei->dev, "Software Transport Stream Inputs: %d\n" + , hw->num_swts); + dev_info(fei->dev, "Transport Stream Output: %d\n", hw->num_tsout); + dev_info(fei->dev, "Cable Card Converter: %d\n", hw->num_ccsc); + dev_info(fei->dev, "RAMs supported by C8SECTPFE: %d\n", hw->num_ram); + dev_info(fei->dev, "Tango TPs supported by C8SECTPFE: %d\n" + , hw->num_tp); +} + +static irqreturn_t c8sectpfe_idle_irq_handler(int irq, void *priv) +{ + struct c8sectpfei *fei = priv; + struct channel_info *chan; + int bit; + unsigned long tmp = readl(fei->io + DMA_IDLE_REQ); + + /* page 168 of functional spec: Clear the idle request + by writing 0 to the C8SECTPFE_DMA_IDLE_REQ register. */ + + /* signal idle completion */ + for_each_set_bit(bit, &tmp, fei->hw_stats.num_ib) { + + chan = find_channel(fei, bit); + + if (chan) + complete(&chan->idle_completion); + } + + writel(0, fei->io + DMA_IDLE_REQ); + + return IRQ_HANDLED; +} + + +static void free_input_block(struct c8sectpfei *fei, struct channel_info *tsin) +{ + if (!fei || !tsin) + return; + + if (tsin->back_buffer_busaddr) + if (!dma_mapping_error(fei->dev, tsin->back_buffer_busaddr)) + dma_unmap_single(fei->dev, tsin->back_buffer_busaddr, + FEI_BUFFER_SIZE, DMA_BIDIRECTIONAL); + + kfree(tsin->back_buffer_start); + + if (tsin->pid_buffer_busaddr) + if (!dma_mapping_error(fei->dev, tsin->pid_buffer_busaddr)) + dma_unmap_single(fei->dev, tsin->pid_buffer_busaddr, + PID_TABLE_SIZE, DMA_BIDIRECTIONAL); + + kfree(tsin->pid_buffer_start); +} + +#define MAX_NAME 20 + +static int configure_memdma_and_inputblock(struct c8sectpfei *fei, + struct channel_info *tsin) +{ + int ret; + u32 tmp; + char tsin_pin_name[MAX_NAME]; + + if (!fei || !tsin) + return -EINVAL; + + dev_dbg(fei->dev, "%s:%d Configuring channel=%p tsin=%d\n" + , __func__, __LINE__, tsin, tsin->tsin_id); + + init_completion(&tsin->idle_completion); + + tsin->back_buffer_start = kzalloc(FEI_BUFFER_SIZE + + FEI_ALIGNMENT, GFP_KERNEL); + + if (!tsin->back_buffer_start) { + ret = -ENOMEM; + goto err_unmap; + } + + /* Ensure backbuffer is 32byte aligned */ + tsin->back_buffer_aligned = tsin->back_buffer_start + + FEI_ALIGNMENT; + + tsin->back_buffer_aligned = (void *) + (((uintptr_t) tsin->back_buffer_aligned) & ~0x1F); + + tsin->back_buffer_busaddr = dma_map_single(fei->dev, + (void *)tsin->back_buffer_aligned, + FEI_BUFFER_SIZE, + DMA_BIDIRECTIONAL); + + if (dma_mapping_error(fei->dev, tsin->back_buffer_busaddr)) { + dev_err(fei->dev, "failed to map back_buffer\n"); + ret = -EFAULT; + goto err_unmap; + } + + /* + * The pid buffer can be configured (in hw) for byte or bit + * per pid. By powers of deduction we conclude stih407 family + * is configured (at SoC design stage) for bit per pid. + */ + tsin->pid_buffer_start = kzalloc(2048, GFP_KERNEL); + + if (!tsin->pid_buffer_start) { + ret = -ENOMEM; + goto err_unmap; + } + + /* + * PID buffer needs to be aligned to size of the pid table + * which at bit per pid is 1024 bytes (8192 pids / 8). + * PIDF_BASE register enforces this alignment when writing + * the register. + */ + + tsin->pid_buffer_aligned = tsin->pid_buffer_start + + PID_TABLE_SIZE; + + tsin->pid_buffer_aligned = (void *) + (((uintptr_t) tsin->pid_buffer_aligned) & ~0x3ff); + + tsin->pid_buffer_busaddr = dma_map_single(fei->dev, + tsin->pid_buffer_aligned, + PID_TABLE_SIZE, + DMA_BIDIRECTIONAL); + + if (dma_mapping_error(fei->dev, tsin->pid_buffer_busaddr)) { + dev_err(fei->dev, "failed to map pid_bitmap\n"); + ret = -EFAULT; + goto err_unmap; + } + + /* manage cache so pid bitmap is visible to HW */ + dma_sync_single_for_device(fei->dev, + tsin->pid_buffer_busaddr, + PID_TABLE_SIZE, + DMA_TO_DEVICE); + + snprintf(tsin_pin_name, MAX_NAME, "tsin%d-%s", tsin->tsin_id, + (tsin->serial_not_parallel ? "serial" : "parallel")); + + tsin->pstate = pinctrl_lookup_state(fei->pinctrl, tsin_pin_name); + if (IS_ERR(tsin->pstate)) { + dev_err(fei->dev, "%s: pinctrl_lookup_state couldn't find %s state\n" + , __func__, tsin_pin_name); + ret = PTR_ERR(tsin->pstate); + goto err_unmap; + } + + ret = pinctrl_select_state(fei->pinctrl, tsin->pstate); + + if (ret) { + dev_err(fei->dev, "%s: pinctrl_select_state failed\n" + , __func__); + goto err_unmap; + } + + /* Enable this input block */ + tmp = readl(fei->io + SYS_INPUT_CLKEN); + tmp |= BIT(tsin->tsin_id); + writel(tmp, fei->io + SYS_INPUT_CLKEN); + + if (tsin->serial_not_parallel) + tmp |= C8SECTPFE_SERIAL_NOT_PARALLEL; + + if (tsin->invert_ts_clk) + tmp |= C8SECTPFE_INVERT_TSCLK; + + if (tsin->async_not_sync) + tmp |= C8SECTPFE_ASYNC_NOT_SYNC; + + tmp |= C8SECTPFE_ALIGN_BYTE_SOP | C8SECTPFE_BYTE_ENDIANNESS_MSB; + + writel(tmp, fei->io + C8SECTPFE_IB_IP_FMT_CFG(tsin->tsin_id)); + + writel(C8SECTPFE_SYNC(0x9) | + C8SECTPFE_DROP(0x9) | + C8SECTPFE_TOKEN(0x47), + fei->io + C8SECTPFE_IB_SYNCLCKDRP_CFG(tsin->tsin_id)); + + writel(TS_PKT_SIZE, fei->io + C8SECTPFE_IB_PKT_LEN(tsin->tsin_id)); + + /* Place the FIFO's at the end of the irec descriptors */ + + tsin->fifo = (tsin->tsin_id * FIFO_LEN); + + writel(tsin->fifo, fei->io + C8SECTPFE_IB_BUFF_STRT(tsin->tsin_id)); + writel(tsin->fifo + FIFO_LEN - 1, + fei->io + C8SECTPFE_IB_BUFF_END(tsin->tsin_id)); + + writel(tsin->fifo, fei->io + C8SECTPFE_IB_READ_PNT(tsin->tsin_id)); + writel(tsin->fifo, fei->io + C8SECTPFE_IB_WRT_PNT(tsin->tsin_id)); + + writel(tsin->pid_buffer_busaddr, + fei->io + PIDF_BASE(tsin->tsin_id)); + + dev_info(fei->dev, "chan=%d PIDF_BASE=0x%x pid_bus_addr=0x%x\n", + tsin->tsin_id, readl(fei->io + PIDF_BASE(tsin->tsin_id)), + tsin->pid_buffer_busaddr); + + /* Configure and enable HW PID filtering */ + + /* + * The PID value is created by assembling the first 8 bytes of + * the TS packet into a 64-bit word in big-endian format. A + * slice of that 64-bit word is taken from + * (PID_OFFSET+PID_NUM_BITS-1) to PID_OFFSET. + */ + tmp = (C8SECTPFE_PID_ENABLE | C8SECTPFE_PID_NUMBITS(13) + | C8SECTPFE_PID_OFFSET(40)); + + writel(tmp, fei->io + C8SECTPFE_IB_PID_SET(tsin->tsin_id)); + + dev_dbg(fei->dev, "chan=%d setting wp: %d, rp: %d, buf: %d-%d\n", + tsin->tsin_id, + readl(fei->io + C8SECTPFE_IB_WRT_PNT(tsin->tsin_id)), + readl(fei->io + C8SECTPFE_IB_READ_PNT(tsin->tsin_id)), + readl(fei->io + C8SECTPFE_IB_BUFF_STRT(tsin->tsin_id)), + readl(fei->io + C8SECTPFE_IB_BUFF_END(tsin->tsin_id))); + + /* Get base addpress of pointer record block from DMEM */ + tsin->irec = fei->io + DMA_MEMDMA_OFFSET + DMA_DMEM_OFFSET + + readl(fei->io + DMA_PTRREC_BASE); + + /* fill out pointer record data structure */ + + /* advance pointer record block to our channel */ + tsin->irec += (tsin->tsin_id * DMA_PRDS_SIZE); + + writel(tsin->fifo, tsin->irec + DMA_PRDS_MEMBASE); + + writel(tsin->fifo + FIFO_LEN - 1, tsin->irec + DMA_PRDS_MEMTOP); + + writel((188 + 7)&~7, tsin->irec + DMA_PRDS_PKTSIZE); + + writel(0x1, tsin->irec + DMA_PRDS_TPENABLE); + + /* read/write pointers with physical bus address */ + + writel(tsin->back_buffer_busaddr, tsin->irec + DMA_PRDS_BUSBASE_TP(0)); + + tmp = tsin->back_buffer_busaddr + FEI_BUFFER_SIZE - 1; + writel(tmp, tsin->irec + DMA_PRDS_BUSTOP_TP(0)); + + writel(tsin->back_buffer_busaddr, tsin->irec + DMA_PRDS_BUSWP_TP(0)); + writel(tsin->back_buffer_busaddr, tsin->irec + DMA_PRDS_BUSRP_TP(0)); + + /* initialize tasklet */ + tasklet_init(&tsin->tsklet, channel_swdemux_tsklet, + (unsigned long) tsin); + + return 0; + +err_unmap: + free_input_block(fei, tsin); + return ret; +} + +static irqreturn_t c8sectpfe_error_irq_handler(int irq, void *priv) +{ + struct c8sectpfei *fei = priv; + + dev_err(fei->dev, "%s: error handling not yet implemented\n" + , __func__); + + /* + * TODO FIXME we should detect some error conditions here + * and ideally so something about them! + */ + + return IRQ_HANDLED; +} + +static int c8sectpfe_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device_node *child, *np = dev->of_node; + struct c8sectpfei *fei; + struct resource *res; + int ret, index = 0; + struct channel_info *tsin; + + /* Allocate the c8sectpfei structure */ + fei = devm_kzalloc(dev, sizeof(struct c8sectpfei), GFP_KERNEL); + if (!fei) + return -ENOMEM; + + fei->dev = dev; + + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "c8sectpfe"); + fei->io = devm_ioremap_resource(dev, res); + if (IS_ERR(fei->io)) + return PTR_ERR(fei->io); + + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, + "c8sectpfe-ram"); + fei->sram = devm_ioremap_resource(dev, res); + if (IS_ERR(fei->sram)) + return PTR_ERR(fei->sram); + + fei->sram_size = res->end - res->start; + + fei->idle_irq = platform_get_irq_byname(pdev, "c8sectpfe-idle-irq"); + if (fei->idle_irq < 0) { + dev_err(dev, "Can't get c8sectpfe-idle-irq\n"); + return fei->idle_irq; + } + + fei->error_irq = platform_get_irq_byname(pdev, "c8sectpfe-error-irq"); + if (fei->error_irq < 0) { + dev_err(dev, "Can't get c8sectpfe-error-irq\n"); + return fei->error_irq; + } + + platform_set_drvdata(pdev, fei); + + fei->c8sectpfeclk = devm_clk_get(dev, "c8sectpfe"); + if (IS_ERR(fei->c8sectpfeclk)) { + dev_err(dev, "c8sectpfe clk not found\n"); + return PTR_ERR(fei->c8sectpfeclk); + } + + ret = clk_prepare_enable(fei->c8sectpfeclk); + if (ret) { + dev_err(dev, "Failed to enable c8sectpfe clock\n"); + return ret; + } + + /* to save power disable all IP's (on by default) */ + writel(0, fei->io + SYS_INPUT_CLKEN); + + /* Enable memdma clock */ + writel(MEMDMAENABLE, fei->io + SYS_OTHER_CLKEN); + + /* clear internal sram */ + memset_io(fei->sram, 0x0, fei->sram_size); + + c8sectpfe_getconfig(fei); + + ret = devm_request_irq(dev, fei->idle_irq, c8sectpfe_idle_irq_handler, + 0, "c8sectpfe-idle-irq", fei); + if (ret) { + dev_err(dev, "Can't register c8sectpfe-idle-irq IRQ.\n"); + goto err_clk_disable; + } + + ret = devm_request_irq(dev, fei->error_irq, + c8sectpfe_error_irq_handler, 0, + "c8sectpfe-error-irq", fei); + if (ret) { + dev_err(dev, "Can't register c8sectpfe-error-irq IRQ.\n"); + goto err_clk_disable; + } + + fei->tsin_count = of_get_child_count(np); + + if (fei->tsin_count > C8SECTPFE_MAX_TSIN_CHAN || + fei->tsin_count > fei->hw_stats.num_ib) { + + dev_err(dev, "More tsin declared than exist on SoC!\n"); + ret = -EINVAL; + goto err_clk_disable; + } + + fei->pinctrl = devm_pinctrl_get(dev); + + if (IS_ERR(fei->pinctrl)) { + dev_err(dev, "Error getting tsin pins\n"); + ret = PTR_ERR(fei->pinctrl); + goto err_clk_disable; + } + + for_each_child_of_node(np, child) { + struct device_node *i2c_bus; + + fei->channel_data[index] = devm_kzalloc(dev, + sizeof(struct channel_info), + GFP_KERNEL); + + if (!fei->channel_data[index]) { + ret = -ENOMEM; + goto err_clk_disable; + } + + tsin = fei->channel_data[index]; + + tsin->fei = fei; + + ret = of_property_read_u32(child, "tsin-num", &tsin->tsin_id); + if (ret) { + dev_err(&pdev->dev, "No tsin_num found\n"); + goto err_clk_disable; + } + + /* sanity check value */ + if (tsin->tsin_id > fei->hw_stats.num_ib) { + dev_err(&pdev->dev, + "tsin-num %d specified greater than number\n\t" + "of input block hw in SoC! (%d)", + tsin->tsin_id, fei->hw_stats.num_ib); + ret = -EINVAL; + goto err_clk_disable; + } + + tsin->invert_ts_clk = of_property_read_bool(child, + "invert-ts-clk"); + + tsin->serial_not_parallel = of_property_read_bool(child, + "serial-not-parallel"); + + tsin->async_not_sync = of_property_read_bool(child, + "async-not-sync"); + + ret = of_property_read_u32(child, "dvb-card", + &tsin->dvb_card); + if (ret) { + dev_err(&pdev->dev, "No dvb-card found\n"); + goto err_clk_disable; + } + + i2c_bus = of_parse_phandle(child, "i2c-bus", 0); + if (!i2c_bus) { + dev_err(&pdev->dev, "No i2c-bus found\n"); + goto err_clk_disable; + } + tsin->i2c_adapter = + of_find_i2c_adapter_by_node(i2c_bus); + if (!tsin->i2c_adapter) { + dev_err(&pdev->dev, "No i2c adapter found\n"); + of_node_put(i2c_bus); + goto err_clk_disable; + } + of_node_put(i2c_bus); + + tsin->rst_gpio = of_get_named_gpio(child, "rst-gpio", 0); + + ret = gpio_is_valid(tsin->rst_gpio); + if (!ret) { + dev_err(dev, + "reset gpio for tsin%d not valid (gpio=%d)\n", + tsin->tsin_id, tsin->rst_gpio); + goto err_clk_disable; + } + + ret = devm_gpio_request_one(dev, tsin->rst_gpio, + GPIOF_OUT_INIT_LOW, "NIM reset"); + if (ret && ret != -EBUSY) { + dev_err(dev, "Can't request tsin%d reset gpio\n" + , fei->channel_data[index]->tsin_id); + goto err_clk_disable; + } + + if (!ret) { + /* toggle reset lines */ + gpio_direction_output(tsin->rst_gpio, 0); + usleep_range(3500, 5000); + gpio_direction_output(tsin->rst_gpio, 1); + usleep_range(3000, 5000); + } + + tsin->demux_mapping = index; + + dev_dbg(fei->dev, + "channel=%p n=%d tsin_num=%d, invert-ts-clk=%d\n\t" + "serial-not-parallel=%d pkt-clk-valid=%d dvb-card=%d\n", + fei->channel_data[index], index, + tsin->tsin_id, tsin->invert_ts_clk, + tsin->serial_not_parallel, tsin->async_not_sync, + tsin->dvb_card); + + index++; + } + + /* Setup timer interrupt */ + init_timer(&fei->timer); + fei->timer.function = c8sectpfe_timer_interrupt; + fei->timer.data = (unsigned long)fei; + + mutex_init(&fei->lock); + + /* Get the configuration information about the tuners */ + ret = c8sectpfe_tuner_register_frontend(&fei->c8sectpfe[0], + (void *)fei, + c8sectpfe_start_feed, + c8sectpfe_stop_feed); + if (ret) { + dev_err(dev, "c8sectpfe_tuner_register_frontend failed (%d)\n", + ret); + goto err_clk_disable; + } + + /* ensure all other init has been done before requesting firmware */ + ret = load_c8sectpfe_fw_step1(fei); + if (ret) { + dev_err(dev, "Couldn't load slim core firmware\n"); + goto err_clk_disable; + } + + c8sectpfe_debugfs_init(fei); + + return 0; + +err_clk_disable: + /* TODO uncomment when upstream has taken a reference on this clk */ + /*clk_disable_unprepare(fei->c8sectpfeclk);*/ + return ret; +} + +static int c8sectpfe_remove(struct platform_device *pdev) +{ + struct c8sectpfei *fei = platform_get_drvdata(pdev); + struct channel_info *channel; + int i; + + wait_for_completion(&fei->fw_ack); + + c8sectpfe_tuner_unregister_frontend(fei->c8sectpfe[0], fei); + + /* + * Now loop through and un-configure each of the InputBlock resources + */ + for (i = 0; i < fei->tsin_count; i++) { + channel = fei->channel_data[i]; + free_input_block(fei, channel); + } + + c8sectpfe_debugfs_exit(fei); + + dev_info(fei->dev, "Stopping memdma SLIM core\n"); + if (readl(fei->io + DMA_CPU_RUN)) + writel(0x0, fei->io + DMA_CPU_RUN); + + /* unclock all internal IP's */ + if (readl(fei->io + SYS_INPUT_CLKEN)) + writel(0, fei->io + SYS_INPUT_CLKEN); + + if (readl(fei->io + SYS_OTHER_CLKEN)) + writel(0, fei->io + SYS_OTHER_CLKEN); + + /* TODO uncomment when upstream has taken a reference on this clk */ + /* + if (fei->c8sectpfeclk) + clk_disable_unprepare(fei->c8sectpfeclk); + */ + + return 0; +} + + +static int configure_channels(struct c8sectpfei *fei) +{ + int index = 0, ret; + struct channel_info *tsin; + struct device_node *child, *np = fei->dev->of_node; + + /* iterate round each tsin and configure memdma descriptor and IB hw */ + for_each_child_of_node(np, child) { + + tsin = fei->channel_data[index]; + + ret = configure_memdma_and_inputblock(fei, + fei->channel_data[index]); + + if (ret) { + dev_err(fei->dev, + "configure_memdma_and_inputblock failed\n"); + goto err_unmap; + } + index++; + } + + return 0; + +err_unmap: + for (index = 0; index < fei->tsin_count; index++) { + tsin = fei->channel_data[index]; + free_input_block(fei, tsin); + } + return ret; +} + +static int +c8sectpfe_elf_sanity_check(struct c8sectpfei *fei, const struct firmware *fw) +{ + struct elf32_hdr *ehdr; + char class; + + if (!fw) { + dev_err(fei->dev, "failed to load %s\n", FIRMWARE_MEMDMA); + return -EINVAL; + } + + if (fw->size < sizeof(struct elf32_hdr)) { + dev_err(fei->dev, "Image is too small\n"); + return -EINVAL; + } + + ehdr = (struct elf32_hdr *)fw->data; + + /* We only support ELF32 at this point */ + class = ehdr->e_ident[EI_CLASS]; + if (class != ELFCLASS32) { + dev_err(fei->dev, "Unsupported class: %d\n", class); + return -EINVAL; + } + + if (ehdr->e_ident[EI_DATA] != ELFDATA2LSB) { + dev_err(fei->dev, "Unsupported firmware endianness\n"); + return -EINVAL; + } + + if (fw->size < ehdr->e_shoff + sizeof(struct elf32_shdr)) { + dev_err(fei->dev, "Image is too small\n"); + return -EINVAL; + } + + if (memcmp(ehdr->e_ident, ELFMAG, SELFMAG)) { + dev_err(fei->dev, "Image is corrupted (bad magic)\n"); + return -EINVAL; + } + + /* Check ELF magic */ + ehdr = (Elf32_Ehdr *)fw->data; + if (ehdr->e_ident[EI_MAG0] != ELFMAG0 || + ehdr->e_ident[EI_MAG1] != ELFMAG1 || + ehdr->e_ident[EI_MAG2] != ELFMAG2 || + ehdr->e_ident[EI_MAG3] != ELFMAG3) { + dev_err(fei->dev, "Invalid ELF magic\n"); + return -EINVAL; + } + + if (ehdr->e_type != ET_EXEC) { + dev_err(fei->dev, "Unsupported ELF header type\n"); + return -EINVAL; + } + + if (ehdr->e_phoff > fw->size) { + dev_err(fei->dev, "Firmware size is too small\n"); + return -EINVAL; + } + + return 0; +} + + +static void load_imem_segment(struct c8sectpfei *fei, Elf32_Phdr *phdr, + const struct firmware *fw, u8 __iomem *dest, + int seg_num) +{ + const u8 *imem_src = fw->data + phdr->p_offset; + int i; + + /* + * For IMEM segments, the segment contains 24-bit + * instructions which must be padded to 32-bit + * instructions before being written. The written + * segment is padded with NOP instructions. + */ + + dev_dbg(fei->dev, + "Loading IMEM segment %d 0x%08x\n\t" + " (0x%x bytes) -> 0x%p (0x%x bytes)\n", seg_num, + phdr->p_paddr, phdr->p_filesz, + dest, phdr->p_memsz + phdr->p_memsz / 3); + + for (i = 0; i < phdr->p_filesz; i++) { + + writeb(readb((void __iomem *)imem_src), (void __iomem *)dest); + + /* Every 3 bytes, add an additional + * padding zero in destination */ + if (i % 3 == 2) { + dest++; + writeb(0x00, (void __iomem *)dest); + } + + dest++; + imem_src++; + } +} + +static void load_dmem_segment(struct c8sectpfei *fei, Elf32_Phdr *phdr, + const struct firmware *fw, u8 __iomem *dst, int seg_num) +{ + /* + * For DMEM segments copy the segment data from the ELF + * file and pad segment with zeroes + */ + + dev_dbg(fei->dev, + "Loading DMEM segment %d 0x%08x\n\t" + "(0x%x bytes) -> 0x%p (0x%x bytes)\n", + seg_num, phdr->p_paddr, phdr->p_filesz, + dst, phdr->p_memsz); + + memcpy((void __iomem *)dst, (void *)fw->data + phdr->p_offset, + phdr->p_filesz); + + memset((void __iomem *)dst + phdr->p_filesz, 0, + phdr->p_memsz - phdr->p_filesz); +} + +static int load_slim_core_fw(const struct firmware *fw, void *context) +{ + struct c8sectpfei *fei = context; + Elf32_Ehdr *ehdr; + Elf32_Phdr *phdr; + u8 __iomem *dst; + int err, i; + + if (!fw || !context) + return -EINVAL; + + ehdr = (Elf32_Ehdr *)fw->data; + phdr = (Elf32_Phdr *)(fw->data + ehdr->e_phoff); + + /* go through the available ELF segments */ + for (i = 0; i < ehdr->e_phnum && !err; i++, phdr++) { + + /* Only consider LOAD segments */ + if (phdr->p_type != PT_LOAD) + continue; + + /* + * Check segment is contained within the fw->data buffer + */ + if (phdr->p_offset + phdr->p_filesz > fw->size) { + dev_err(fei->dev, + "Segment %d is outside of firmware file\n", i); + err = -EINVAL; + break; + } + + /* + * MEMDMA IMEM has executable flag set, otherwise load + * this segment into DMEM. + * + */ + + if (phdr->p_flags & PF_X) { + dst = (u8 __iomem *) fei->io + DMA_MEMDMA_IMEM; + /* + * The Slim ELF file uses 32-bit word addressing for + * load offsets. + */ + dst += (phdr->p_paddr & 0xFFFFF) * sizeof(unsigned int); + load_imem_segment(fei, phdr, fw, dst, i); + } else { + dst = (u8 __iomem *) fei->io + DMA_MEMDMA_DMEM; + /* + * The Slim ELF file uses 32-bit word addressing for + * load offsets. + */ + dst += (phdr->p_paddr & 0xFFFFF) * sizeof(unsigned int); + load_dmem_segment(fei, phdr, fw, dst, i); + } + } + + release_firmware(fw); + return err; +} + +static void load_c8sectpfe_fw_cb(const struct firmware *fw, void *context) +{ + struct c8sectpfei *fei = context; + int err; + + err = c8sectpfe_elf_sanity_check(fei, fw); + if (err) { + dev_err(fei->dev, "c8sectpfe_elf_sanity_check failed err=(%d)\n" + , err); + goto err; + } + + err = load_slim_core_fw(fw, context); + if (err) { + dev_err(fei->dev, "load_slim_core_fw failed err=(%d)\n", err); + goto err; + } + + /* now the firmware is loaded configure the input blocks */ + err = configure_channels(fei); + if (err) { + dev_err(fei->dev, "configure_channels failed err=(%d)\n", err); + goto err; + } + + /* + * STBus target port can access IMEM and DMEM ports + * without waiting for CPU + */ + writel(0x1, fei->io + DMA_PER_STBUS_SYNC); + + dev_info(fei->dev, "Boot the memdma SLIM core\n"); + writel(0x1, fei->io + DMA_CPU_RUN); + + atomic_set(&fei->fw_loaded, 1); +err: + complete_all(&fei->fw_ack); +} + +static int load_c8sectpfe_fw_step1(struct c8sectpfei *fei) +{ + int ret; + int err; + + dev_info(fei->dev, "Loading firmware: %s\n", FIRMWARE_MEMDMA); + + init_completion(&fei->fw_ack); + atomic_set(&fei->fw_loaded, 0); + + err = request_firmware_nowait(THIS_MODULE, FW_ACTION_HOTPLUG, + FIRMWARE_MEMDMA, fei->dev, GFP_KERNEL, fei, + load_c8sectpfe_fw_cb); + + if (err) { + dev_err(fei->dev, "request_firmware_nowait err: %d.\n", err); + complete_all(&fei->fw_ack); + return ret; + } + + return 0; +} + +static const struct of_device_id c8sectpfe_match[] = { + { .compatible = "st,stih407-c8sectpfe" }, + { /* sentinel */ }, +}; +MODULE_DEVICE_TABLE(of, c8sectpfe_match); + +static struct platform_driver c8sectpfe_driver = { + .driver = { + .name = "c8sectpfe", + .of_match_table = of_match_ptr(c8sectpfe_match), + }, + .probe = c8sectpfe_probe, + .remove = c8sectpfe_remove, +}; + +module_platform_driver(c8sectpfe_driver); + +MODULE_AUTHOR("Peter Bennett "); +MODULE_AUTHOR("Peter Griffin "); +MODULE_DESCRIPTION("C8SECTPFE STi DVB Driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/platform/sti/c8sectpfe/c8sectpfe-core.h b/drivers/media/platform/sti/c8sectpfe/c8sectpfe-core.h new file mode 100644 index 0000000..39e7a22 --- /dev/null +++ b/drivers/media/platform/sti/c8sectpfe/c8sectpfe-core.h @@ -0,0 +1,288 @@ +/* + * c8sectpfe-core.h - C8SECTPFE STi DVB driver + * + * Copyright (c) STMicroelectronics 2015 + * + * Author:Peter Bennett + * Peter Griffin + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + */ +#ifndef _C8SECTPFE_CORE_H_ +#define _C8SECTPFE_CORE_H_ + +#define C8SECTPFEI_MAXCHANNEL 16 +#define C8SECTPFEI_MAXADAPTER 3 + +#define C8SECTPFE_MAX_TSIN_CHAN 8 + +struct channel_info { + + int tsin_id; + bool invert_ts_clk; + bool serial_not_parallel; + bool async_not_sync; + int i2c; + int dvb_card; + + int rst_gpio; + + struct i2c_adapter *i2c_adapter; + struct i2c_adapter *tuner_i2c; + struct i2c_adapter *lnb_i2c; + struct i2c_client *i2c_client; + struct dvb_frontend *frontend; + + struct pinctrl_state *pstate; + + int demux_mapping; + int active; + + void *back_buffer_start; + void *back_buffer_aligned; + dma_addr_t back_buffer_busaddr; + + void *pid_buffer_start; + void *pid_buffer_aligned; + dma_addr_t pid_buffer_busaddr; + + unsigned long fifo; + + struct completion idle_completion; + struct tasklet_struct tsklet; + + struct c8sectpfei *fei; + void __iomem *irec; + +}; + +struct c8sectpfe_hw { + int num_ib; + int num_mib; + int num_swts; + int num_tsout; + int num_ccsc; + int num_ram; + int num_tp; +}; + +struct c8sectpfei { + + struct device *dev; + struct pinctrl *pinctrl; + + struct dentry *root; + struct debugfs_regset32 *regset; + struct completion fw_ack; + atomic_t fw_loaded; + + int tsin_count; + + struct c8sectpfe_hw hw_stats; + + struct c8sectpfe *c8sectpfe[C8SECTPFEI_MAXADAPTER]; + + int mapping[C8SECTPFEI_MAXCHANNEL]; + + struct mutex lock; + + struct timer_list timer; /* timer interrupts for outputs */ + + void __iomem *io; + void __iomem *sram; + + unsigned long sram_size; + + struct channel_info *channel_data[C8SECTPFE_MAX_TSIN_CHAN]; + + struct clk *c8sectpfeclk; + int nima_rst_gpio; + int nimb_rst_gpio; + + int idle_irq; + int error_irq; + + int global_feed_count; +}; + +/* C8SECTPFE SYS Regs list */ + +#define SYS_INPUT_ERR_STATUS 0x0 +#define SYS_OTHER_ERR_STATUS 0x8 +#define SYS_INPUT_ERR_MASK 0x10 +#define SYS_OTHER_ERR_MASK 0x18 +#define SYS_DMA_ROUTE 0x20 +#define SYS_INPUT_CLKEN 0x30 +#define IBENABLE_MASK 0x7F + +#define SYS_OTHER_CLKEN 0x38 +#define TSDMAENABLE BIT(1) +#define MEMDMAENABLE BIT(0) + +#define SYS_CFG_NUM_IB 0x200 +#define SYS_CFG_NUM_MIB 0x204 +#define SYS_CFG_NUM_SWTS 0x208 +#define SYS_CFG_NUM_TSOUT 0x20C +#define SYS_CFG_NUM_CCSC 0x210 +#define SYS_CFG_NUM_RAM 0x214 +#define SYS_CFG_NUM_TP 0x218 + +/* Input Block Regs */ + +#define C8SECTPFE_INPUTBLK_OFFSET 0x1000 +#define C8SECTPFE_CHANNEL_OFFSET(x) ((x*0x40) + C8SECTPFE_INPUTBLK_OFFSET) + +#define C8SECTPFE_IB_IP_FMT_CFG(x) (C8SECTPFE_CHANNEL_OFFSET(x) + 0x00) +#define C8SECTPFE_IGNORE_ERR_AT_SOP BIT(7) +#define C8SECTPFE_IGNORE_ERR_IN_PKT BIT(6) +#define C8SECTPFE_IGNORE_ERR_IN_BYTE BIT(5) +#define C8SECTPFE_INVERT_TSCLK BIT(4) +#define C8SECTPFE_ALIGN_BYTE_SOP BIT(3) +#define C8SECTPFE_ASYNC_NOT_SYNC BIT(2) +#define C8SECTPFE_BYTE_ENDIANNESS_MSB BIT(1) +#define C8SECTPFE_SERIAL_NOT_PARALLEL BIT(0) + +#define C8SECTPFE_IB_SYNCLCKDRP_CFG(x) (C8SECTPFE_CHANNEL_OFFSET(x) + 0x04) +#define C8SECTPFE_SYNC(x) (x & 0xf) +#define C8SECTPFE_DROP(x) ((x<<4) & 0xf) +#define C8SECTPFE_TOKEN(x) ((x<<8) & 0xff00) +#define C8SECTPFE_SLDENDIANNESS BIT(16) + +#define C8SECTPFE_IB_TAGBYTES_CFG(x) (C8SECTPFE_CHANNEL_OFFSET(x) + 0x08) +#define C8SECTPFE_TAG_HEADER(x) (x << 16) +#define C8SECTPFE_TAG_COUNTER(x) ((x<<1) & 0x7fff) +#define C8SECTPFE_TAG_ENABLE BIT(0) + +#define C8SECTPFE_IB_PID_SET(x) (C8SECTPFE_CHANNEL_OFFSET(x) + 0x0C) +#define C8SECTPFE_PID_OFFSET(x) (x & 0x3f) +#define C8SECTPFE_PID_NUMBITS(x) ((x << 6) & 0xfff) +#define C8SECTPFE_PID_ENABLE BIT(31) + +#define C8SECTPFE_IB_PKT_LEN(x) (C8SECTPFE_CHANNEL_OFFSET(x) + 0x10) + +#define C8SECTPFE_IB_BUFF_STRT(x) (C8SECTPFE_CHANNEL_OFFSET(x) + 0x14) +#define C8SECTPFE_IB_BUFF_END(x) (C8SECTPFE_CHANNEL_OFFSET(x) + 0x18) +#define C8SECTPFE_IB_READ_PNT(x) (C8SECTPFE_CHANNEL_OFFSET(x) + 0x1C) +#define C8SECTPFE_IB_WRT_PNT(x) (C8SECTPFE_CHANNEL_OFFSET(x) + 0x20) + +#define C8SECTPFE_IB_PRI_THRLD(x) (C8SECTPFE_CHANNEL_OFFSET(x) + 0x24) +#define C8SECTPFE_PRI_VALUE(x) (x & 0x7fffff) +#define C8SECTPFE_PRI_LOWPRI(x) ((x & 0xf) << 24) +#define C8SECTPFE_PRI_HIGHPRI(x) ((x & 0xf) << 28) + +#define C8SECTPFE_IB_STAT(x) (C8SECTPFE_CHANNEL_OFFSET(x) + 0x28) +#define C8SECTPFE_STAT_FIFO_OVERFLOW(x) (x & 0x1) +#define C8SECTPFE_STAT_BUFFER_OVERFLOW(x) (x & 0x2) +#define C8SECTPFE_STAT_OUTOFORDERRP(x) (x & 0x4) +#define C8SECTPFE_STAT_PID_OVERFLOW(x) (x & 0x8) +#define C8SECTPFE_STAT_PKT_OVERFLOW(x) (x & 0x10) +#define C8SECTPFE_STAT_ERROR_PACKETS(x) ((x >> 8) & 0xf) +#define C8SECTPFE_STAT_SHORT_PACKETS(x) ((x >> 12) & 0xf) + +#define C8SECTPFE_IB_MASK(x) (C8SECTPFE_CHANNEL_OFFSET(x) + 0x2C) +#define C8SECTPFE_MASK_FIFO_OVERFLOW BIT(0) +#define C8SECTPFE_MASK_BUFFER_OVERFLOW BIT(1) +#define C8SECTPFE_MASK_OUTOFORDERRP(x) BIT(2) +#define C8SECTPFE_MASK_PID_OVERFLOW(x) BIT(3) +#define C8SECTPFE_MASK_PKT_OVERFLOW(x) BIT(4) +#define C8SECTPFE_MASK_ERROR_PACKETS(x) ((x & 0xf) << 8) +#define C8SECTPFE_MASK_SHORT_PACKETS(x) ((x & 0xf) >> 12) + +#define C8SECTPFE_IB_SYS(x) (C8SECTPFE_CHANNEL_OFFSET(x) + 0x30) +#define C8SECTPFE_SYS_RESET BIT(1) +#define C8SECTPFE_SYS_ENABLE BIT(0) + +/* + * Ponter record data structure required for each input block + * see Table 82 on page 167 of functional specification. + */ + +#define DMA_PRDS_MEMBASE 0x0 /* Internal sram base address */ +#define DMA_PRDS_MEMTOP 0x4 /* Internal sram top address */ + +/* + * TS packet size, including tag bytes added by input block, + * rounded up to the next multiple of 8 bytes. The packet size, + * including any tagging bytes and rounded up to the nearest + * multiple of 8 bytes must be less than 255 bytes. + */ +#define DMA_PRDS_PKTSIZE 0x8 +#define DMA_PRDS_TPENABLE 0xc + +#define TP0_OFFSET 0x10 +#define DMA_PRDS_BUSBASE_TP(x) ((0x10*x) + TP0_OFFSET) +#define DMA_PRDS_BUSTOP_TP(x) ((0x10*x) + TP0_OFFSET + 0x4) +#define DMA_PRDS_BUSWP_TP(x) ((0x10*x) + TP0_OFFSET + 0x8) +#define DMA_PRDS_BUSRP_TP(x) ((0x10*x) + TP0_OFFSET + 0xc) + +#define DMA_PRDS_SIZE (0x20) + +#define DMA_MEMDMA_OFFSET 0x4000 +#define DMA_IMEM_OFFSET 0x0 +#define DMA_DMEM_OFFSET 0x4000 +#define DMA_CPU 0x8000 +#define DMA_PER_OFFSET 0xb000 + +#define DMA_MEMDMA_DMEM (DMA_MEMDMA_OFFSET + DMA_DMEM_OFFSET) +#define DMA_MEMDMA_IMEM (DMA_MEMDMA_OFFSET + DMA_IMEM_OFFSET) + +/* XP70 Slim core regs */ +#define DMA_CPU_ID (DMA_MEMDMA_OFFSET + DMA_CPU + 0x0) +#define DMA_CPU_VCR (DMA_MEMDMA_OFFSET + DMA_CPU + 0x4) +#define DMA_CPU_RUN (DMA_MEMDMA_OFFSET + DMA_CPU + 0x8) +#define DMA_CPU_CLOCKGATE (DMA_MEMDMA_OFFSET + DMA_CPU + 0xc) +#define DMA_CPU_PC (DMA_MEMDMA_OFFSET + DMA_CPU + 0x20) + +/* Enable Interrupt for a IB */ +#define DMA_PER_TPn_DREQ_MASK (DMA_MEMDMA_OFFSET + DMA_PER_OFFSET + 0xd00) +/* Ack interrupt by setting corresponding bit */ +#define DMA_PER_TPn_DACK_SET (DMA_MEMDMA_OFFSET + DMA_PER_OFFSET + 0xd80) +#define DMA_PER_TPn_DREQ (DMA_MEMDMA_OFFSET + DMA_PER_OFFSET + 0xe00) +#define DMA_PER_TPn_DACK (DMA_MEMDMA_OFFSET + DMA_PER_OFFSET + 0xe80) +#define DMA_PER_DREQ_MODE (DMA_MEMDMA_OFFSET + DMA_PER_OFFSET + 0xf80) +#define DMA_PER_STBUS_SYNC (DMA_MEMDMA_OFFSET + DMA_PER_OFFSET + 0xf88) +#define DMA_PER_STBUS_ACCESS (DMA_MEMDMA_OFFSET + DMA_PER_OFFSET + 0xf8c) +#define DMA_PER_STBUS_ADDRESS (DMA_MEMDMA_OFFSET + DMA_PER_OFFSET + 0xf90) +#define DMA_PER_IDLE_INT (DMA_MEMDMA_OFFSET + DMA_PER_OFFSET + 0xfa8) +#define DMA_PER_PRIORITY (DMA_MEMDMA_OFFSET + DMA_PER_OFFSET + 0xfac) +#define DMA_PER_MAX_OPCODE (DMA_MEMDMA_OFFSET + DMA_PER_OFFSET + 0xfb0) +#define DMA_PER_MAX_CHUNK (DMA_MEMDMA_OFFSET + DMA_PER_OFFSET + 0xfb4) +#define DMA_PER_PAGE_SIZE (DMA_MEMDMA_OFFSET + DMA_PER_OFFSET + 0xfbc) +#define DMA_PER_MBOX_STATUS (DMA_MEMDMA_OFFSET + DMA_PER_OFFSET + 0xfc0) +#define DMA_PER_MBOX_SET (DMA_MEMDMA_OFFSET + DMA_PER_OFFSET + 0xfc8) +#define DMA_PER_MBOX_CLEAR (DMA_MEMDMA_OFFSET + DMA_PER_OFFSET + 0xfd0) +#define DMA_PER_MBOX_MASK (DMA_MEMDMA_OFFSET + DMA_PER_OFFSET + 0xfd8) +#define DMA_PER_INJECT_PKT_SRC (DMA_MEMDMA_OFFSET + DMA_PER_OFFSET + 0xfe0) +#define DMA_PER_INJECT_PKT_DEST (DMA_MEMDMA_OFFSET + DMA_PER_OFFSET + 0xfe4) +#define DMA_PER_INJECT_PKT_ADDR (DMA_MEMDMA_OFFSET + DMA_PER_OFFSET + 0xfe8) +#define DMA_PER_INJECT_PKT (DMA_MEMDMA_OFFSET + DMA_PER_OFFSET + 0xfec) +#define DMA_PER_PAT_PTR_INIT (DMA_MEMDMA_OFFSET + DMA_PER_OFFSET + 0xff0) +#define DMA_PER_PAT_PTR (DMA_MEMDMA_OFFSET + DMA_PER_OFFSET + 0xff4) +#define DMA_PER_SLEEP_MASK (DMA_MEMDMA_OFFSET + DMA_PER_OFFSET + 0xff8) +#define DMA_PER_SLEEP_COUNTER (DMA_MEMDMA_OFFSET + DMA_PER_OFFSET + 0xffc) +/* #define DMA_RF_CPUREGn DMA_RFBASEADDR n=0 to 15) slim regsa */ + +/* The following are from DMA_DMEM_BaseAddress */ +#define DMA_FIRMWARE_VERSION (DMA_MEMDMA_OFFSET + DMA_DMEM_OFFSET + 0x0) +#define DMA_PTRREC_BASE (DMA_MEMDMA_OFFSET + DMA_DMEM_OFFSET + 0x4) +#define DMA_PTRREC_INPUT_OFFSET (DMA_MEMDMA_OFFSET + DMA_DMEM_OFFSET + 0x8) +#define DMA_ERRREC_BASE (DMA_MEMDMA_OFFSET + DMA_DMEM_OFFSET + 0xc) +#define DMA_ERROR_RECORD(n) ((n*4) + DMA_ERRREC_BASE + 0x4) +#define DMA_IDLE_REQ (DMA_MEMDMA_OFFSET + DMA_DMEM_OFFSET + 0x10) +#define IDLEREQ BIT(31) + +#define DMA_FIRMWARE_CONFIG (DMA_MEMDMA_OFFSET + DMA_DMEM_OFFSET + 0x14) + +/* Regs for PID Filter */ + +#define PIDF_OFFSET 0x2800 +#define PIDF_BASE(n) ((n*4) + PIDF_OFFSET) +#define PIDF_LEAK_ENABLE (PIDF_OFFSET + 0x100) +#define PIDF_LEAK_STATUS (PIDF_OFFSET + 0x108) +#define PIDF_LEAK_COUNT_RESET (PIDF_OFFSET + 0x110) +#define PIDF_LEAK_COUNTER (PIDF_OFFSET + 0x114) + +#endif /* _C8SECTPFE_CORE_H_ */ -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/