Message-ID: <1438347469.4668.1.camel@plaes.org>
Subject: Re: [linux-sunxi] [PATCH 1/2] ARM: sunxi_defconfig: Enable
 DMA_SUN6I, P2WI, PWM, cryptodev, EXTCON, FHANDLE
From: Priit Laes <plaes@plaes.org>
To: wens@csie.org, Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: linux-arm-kernel@lists.infradead.org, linux-sunxi@googlegroups.com,
        linux-kernel@vger.kernel.org
Date: Fri, 31 Jul 2015 15:57:49 +0300
In-Reply-To: <1438341127-7175-2-git-send-email-wens@csie.org>
References: <1438341127-7175-1-git-send-email-wens@csie.org>
	 <1438341127-7175-2-git-send-email-wens@csie.org>
Content-Type: text/plain; charset="UTF-8"
Mime-Version: 1.0
Content-Transfer-Encoding: 7bit
Sender: linux-kernel-owner@vger.kernel.org
Content-Length: 2075
Lines: 69

On Fri, 2015-07-31 at 19:12 +0800, Chen-Yu Tsai wrote:
> Enable sun6i DMA engine, sun6i P2WI, PWM, and crypto engine (Security
> System) drivers by default. EXTCON is needed by the updated sun4i USB
> PHY driver.
> 
> While at it, enable FHANDLE, which is needed by systemd and newer
> versions of udev.

You might want to also add CONFIG_CGROUPS which is needed by systemd.

> 
> And get rid of POWER_RESET, as the sun6i power reset driver has been
> removed in favor of proper sun6i watchdog support.
> 
> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
> ---
>  arch/arm/configs/sunxi_defconfig | 9 ++++++++-
>  1 file changed, 8 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/arm/configs/sunxi_defconfig 
> b/arch/arm/configs/sunxi_defconfig
> index 7ebc346bf9fa..52cc0686524f 100644
> --- a/arch/arm/configs/sunxi_defconfig
> +++ b/arch/arm/configs/sunxi_defconfig
> @@ -1,3 +1,4 @@
> +CONFIG_FHANDLE=y
>  CONFIG_NO_HZ=y
>  CONFIG_HIGH_RES_TIMERS=y
>  CONFIG_BLK_DEV_INITRD=y
> @@ -72,12 +73,12 @@ CONFIG_SERIAL_OF_PLATFORM=y
>  CONFIG_I2C=y
>  CONFIG_I2C_CHARDEV=y
>  CONFIG_I2C_MV64XXX=y
> +CONFIG_I2C_SUN6I_P2WI=y
>  CONFIG_SPI=y
>  CONFIG_SPI_SUN4I=y
>  CONFIG_SPI_SUN6I=y
>  CONFIG_GPIO_SYSFS=y
>  CONFIG_POWER_SUPPLY=y
> -CONFIG_POWER_RESET=y
>  CONFIG_THERMAL=y
>  CONFIG_CPU_THERMAL=y
>  CONFIG_WATCHDOG=y
> @@ -109,7 +110,12 @@ CONFIG_RTC_CLASS=y
>  # CONFIG_RTC_INTF_PROC is not set
>  CONFIG_RTC_DRV_SUN6I=y
>  CONFIG_RTC_DRV_SUNXI=y
> +CONFIG_DMADEVICES=y
> +CONFIG_DMA_SUN6I=y
>  # CONFIG_IOMMU_SUPPORT is not set
> +CONFIG_EXTCON=y
> +CONFIG_PWM=y
> +CONFIG_PWM_SUN4I=y
>  CONFIG_PHY_SUN4I_USB=y
>  CONFIG_PHY_SUN9I_USB=y
>  CONFIG_EXT4_FS=y
> @@ -123,3 +129,4 @@ CONFIG_NLS_CODEPAGE_437=y
>  CONFIG_NLS_ISO8859_1=y
>  CONFIG_PRINTK_TIME=y
>  CONFIG_DEBUG_FS=y
> +CONFIG_CRYPTO_DEV_SUN4I_SS=y
> -- 
> 2.5.0
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/