Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751534AbbHBKNE (ORCPT ); Sun, 2 Aug 2015 06:13:04 -0400 Received: from mail-pa0-f52.google.com ([209.85.220.52]:33478 "EHLO mail-pa0-f52.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751031AbbHBKNC (ORCPT ); Sun, 2 Aug 2015 06:13:02 -0400 From: Tomer Barletz To: tj@kernel.org Cc: linux-ide@vger.kernel.org, linux-kernel@vger.kernel.org, Tomer Barletz Subject: [PATCH] Check return code from pdc20621_i2c_read() Date: Sun, 2 Aug 2015 03:12:20 -0700 Message-Id: <1438510340-21568-1-git-send-email-barletz@gmail.com> X-Mailer: git-send-email 2.4.3 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 1790 Lines: 49 The variable spd0 might be used uninitialized when pdc20621_i2c_read() fails. This also generates a compilation warning with gcc 5.1. Signed-off-by: Tomer Barletz --- drivers/ata/sata_sx4.c | 14 ++++++++++---- 1 file changed, 10 insertions(+), 4 deletions(-) diff --git a/drivers/ata/sata_sx4.c b/drivers/ata/sata_sx4.c index 3a18a8a..bed311b 100644 --- a/drivers/ata/sata_sx4.c +++ b/drivers/ata/sata_sx4.c @@ -1238,8 +1238,11 @@ static unsigned int pdc20621_prog_dimm_global(struct ata_host *host) readl(mmio + PDC_SDRAM_CONTROL); /* Turn on for ECC */ - pdc20621_i2c_read(host, PDC_DIMM0_SPD_DEV_ADDRESS, - PDC_DIMM_SPD_TYPE, &spd0); + if (!pdc20621_i2c_read(host, PDC_DIMM0_SPD_DEV_ADDRESS, + PDC_DIMM_SPD_TYPE, &spd0)) { + printk(KERN_ERR "Failed in i2c read: device=0x%d, subaddr=0x%d\n", PDC_DIMM0_SPD_DEV_ADDRESS, PDC_DIMM_SPD_TYPE); + return 1; + } if (spd0 == 0x02) { data |= (0x01 << 16); writel(data, mmio + PDC_SDRAM_CONTROL); @@ -1380,8 +1383,11 @@ static unsigned int pdc20621_dimm_init(struct ata_host *host) /* ECC initiliazation. */ - pdc20621_i2c_read(host, PDC_DIMM0_SPD_DEV_ADDRESS, - PDC_DIMM_SPD_TYPE, &spd0); + if (!pdc20621_i2c_read(host, PDC_DIMM0_SPD_DEV_ADDRESS, + PDC_DIMM_SPD_TYPE, &spd0)) { + printk(KERN_ERR "Failed in i2c read: device=0x%d, subaddr=0x%d\n", PDC_DIMM0_SPD_DEV_ADDRESS, PDC_DIMM_SPD_TYPE); + return 1; + } if (spd0 == 0x02) { void *buf; VPRINTK("Start ECC initialization\n"); -- 2.4.3 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/