Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754470AbbHCSUC (ORCPT ); Mon, 3 Aug 2015 14:20:02 -0400 Received: from mail-lb0-f174.google.com ([209.85.217.174]:34188 "EHLO mail-lb0-f174.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754295AbbHCSTv (ORCPT ); Mon, 3 Aug 2015 14:19:51 -0400 From: Rabin Vincent To: jesper.nilsson@axis.com Cc: linux-kernel@vger.kernel.org, linux-cris-kernel@axis.com, Rabin Vincent Subject: [PATCH 6/6] CRIS v32: remove old GPIO and LEDs code Date: Mon, 3 Aug 2015 20:19:24 +0200 Message-Id: <1438625964-22335-6-git-send-email-rabin@rab.in> X-Mailer: git-send-email 2.1.4 In-Reply-To: <1438625964-22335-1-git-send-email-rabin@rab.in> References: <1438625964-22335-1-git-send-email-rabin@rab.in> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 80000 Lines: 2866 Since we now have a gpiolib driver, remove this code: The gpio-etraxfs driver (along with things like gpio-keys-polled for polling support) replaces the GIO driver implementations in mach-a3 and mach-fs. The various generic external chip drivers replace the "virtual gpio" parts. The generic gpio-leds driver replaces the LED handling. Signed-off-by: Rabin Vincent --- arch/cris/arch-v32/Kconfig | 89 --- arch/cris/arch-v32/drivers/Kconfig | 149 ----- arch/cris/arch-v32/drivers/mach-a3/Makefile | 1 - arch/cris/arch-v32/drivers/mach-a3/gpio.c | 999 ---------------------------- arch/cris/arch-v32/drivers/mach-fs/Makefile | 1 - arch/cris/arch-v32/drivers/mach-fs/gpio.c | 979 --------------------------- arch/cris/arch-v32/kernel/crisksyms.c | 3 - arch/cris/arch-v32/mach-a3/Makefile | 2 +- arch/cris/arch-v32/mach-a3/io.c | 149 ----- arch/cris/arch-v32/mach-fs/Makefile | 2 +- arch/cris/arch-v32/mach-fs/io.c | 191 ------ arch/cris/include/arch-v32/arch/io.h | 140 ---- arch/cris/include/asm/io.h | 2 + 13 files changed, 4 insertions(+), 2703 deletions(-) delete mode 100644 arch/cris/arch-v32/drivers/mach-a3/gpio.c delete mode 100644 arch/cris/arch-v32/drivers/mach-fs/gpio.c delete mode 100644 arch/cris/arch-v32/mach-a3/io.c delete mode 100644 arch/cris/arch-v32/mach-fs/io.c delete mode 100644 arch/cris/include/arch-v32/arch/io.h diff --git a/arch/cris/arch-v32/Kconfig b/arch/cris/arch-v32/Kconfig index 21bbd93..17dbe03 100644 --- a/arch/cris/arch-v32/Kconfig +++ b/arch/cris/arch-v32/Kconfig @@ -11,95 +11,6 @@ config ETRAX_DRAM_VIRTUAL_BASE default "c0000000" choice - prompt "Nbr of Ethernet LED groups" - depends on ETRAX_ARCH_V32 - default ETRAX_NBR_LED_GRP_ONE - help - Select how many Ethernet LED groups that can be used. Usually one per Ethernet - interface is a good choice. - -config ETRAX_NBR_LED_GRP_ZERO - bool "Use zero LED groups" - help - Select this if you do not want any Ethernet LEDs. - -config ETRAX_NBR_LED_GRP_ONE - bool "Use one LED group" - help - Select this if you want one Ethernet LED group. This LED group - can be used for one or more Ethernet interfaces. However, it is - recommended that each Ethernet interface use a dedicated LED group. - -config ETRAX_NBR_LED_GRP_TWO - bool "Use two LED groups" - help - Select this if you want two Ethernet LED groups. This is the - best choice if you have more than one Ethernet interface and - would like to have separate LEDs for the interfaces. - -endchoice - -config ETRAX_LED_G_NET0 - string "Ethernet LED group 0 green LED bit" - depends on ETRAX_ARCH_V32 && (ETRAX_NBR_LED_GRP_ONE || ETRAX_NBR_LED_GRP_TWO) - default "PA3" - help - Bit to use for the green LED in Ethernet LED group 0. - -config ETRAX_LED_R_NET0 - string "Ethernet LED group 0 red LED bit" - depends on ETRAX_ARCH_V32 && (ETRAX_NBR_LED_GRP_ONE || ETRAX_NBR_LED_GRP_TWO) - default "PA4" - help - Bit to use for the red LED in Ethernet LED group 0. - -config ETRAX_LED_G_NET1 - string "Ethernet group 1 green LED bit" - depends on ETRAX_ARCH_V32 && ETRAX_NBR_LED_GRP_TWO - default "" - help - Bit to use for the green LED in Ethernet LED group 1. - -config ETRAX_LED_R_NET1 - string "Ethernet group 1 red LED bit" - depends on ETRAX_ARCH_V32 && ETRAX_NBR_LED_GRP_TWO - default "" - help - Bit to use for the red LED in Ethernet LED group 1. - -config ETRAX_V32_LED2G - string "Second green LED bit" - depends on ETRAX_ARCH_V32 - default "PA5" - help - Bit to use for the first green LED (status LED). - Most Axis products use bit A5 here. - -config ETRAX_V32_LED2R - string "Second red LED bit" - depends on ETRAX_ARCH_V32 - default "PA6" - help - Bit to use for the first red LED (network LED). - Most Axis products use bit A6 here. - -config ETRAX_V32_LED3G - string "Third green LED bit" - depends on ETRAX_ARCH_V32 - default "PA7" - help - Bit to use for the first green LED (drive/power LED). - Most Axis products use bit A7 here. - -config ETRAX_V32_LED3R - string "Third red LED bit" - depends on ETRAX_ARCH_V32 - default "PA7" - help - Bit to use for the first red LED (drive/power LED). - Most Axis products use bit A7 here. - -choice prompt "Kernel GDB port" depends on ETRAX_KGDB default ETRAX_KGDB_PORT0 diff --git a/arch/cris/arch-v32/drivers/Kconfig b/arch/cris/arch-v32/drivers/Kconfig index bebb718..2735eb7 100644 --- a/arch/cris/arch-v32/drivers/Kconfig +++ b/arch/cris/arch-v32/drivers/Kconfig @@ -149,155 +149,6 @@ config ETRAX_NANDBOOT Say Y if your boot code, kernel and root file system is in NAND flash. Say N if they are in NOR flash. -config ETRAX_GPIO - bool "GPIO support" - depends on ETRAX_ARCH_V32 - ---help--- - Enables the ETRAX general port device (major 120, minors 0-4). - You can use this driver to access the general port bits. It supports - these ioctl's: - #include - fd = open("/dev/gpioa", O_RDWR); // or /dev/gpiob - ioctl(fd, _IO(ETRAXGPIO_IOCTYPE, IO_SETBITS), bits_to_set); - ioctl(fd, _IO(ETRAXGPIO_IOCTYPE, IO_CLRBITS), bits_to_clear); - err = ioctl(fd, _IO(ETRAXGPIO_IOCTYPE, IO_READ_INBITS), &val); - Remember that you need to setup the port directions appropriately in - the General configuration. - -config ETRAX_VIRTUAL_GPIO - bool "Virtual GPIO support" - depends on ETRAX_GPIO - help - Enables the virtual Etrax general port device (major 120, minor 6). - It uses an I/O expander for the I2C-bus. - -config ETRAX_VIRTUAL_GPIO_INTERRUPT_PA_PIN - int "Virtual GPIO interrupt pin on PA pin" - range 0 7 - depends on ETRAX_VIRTUAL_GPIO - help - The pin to use on PA for virtual gpio interrupt. - -config ETRAX_PA_CHANGEABLE_DIR - hex "PA user changeable dir mask" - depends on ETRAX_GPIO - default "0x00" if ETRAXFS - default "0x00000000" if !ETRAXFS - help - This is a bitmask (8 bits) with information of what bits in PA that a - user can change direction on using ioctl's. - Bit set = changeable. - You probably want 0 here, but it depends on your hardware. - -config ETRAX_PA_CHANGEABLE_BITS - hex "PA user changeable bits mask" - depends on ETRAX_GPIO - default "0x00" if ETRAXFS - default "0x00000000" if !ETRAXFS - help - This is a bitmask (8 bits) with information of what bits in PA - that a user can change the value on using ioctl's. - Bit set = changeable. - -config ETRAX_PB_CHANGEABLE_DIR - hex "PB user changeable dir mask" - depends on ETRAX_GPIO - default "0x00000" if ETRAXFS - default "0x00000000" if !ETRAXFS - help - This is a bitmask (18 bits) with information of what bits in PB - that a user can change direction on using ioctl's. - Bit set = changeable. - You probably want 0 here, but it depends on your hardware. - -config ETRAX_PB_CHANGEABLE_BITS - hex "PB user changeable bits mask" - depends on ETRAX_GPIO - default "0x00000" if ETRAXFS - default "0x00000000" if !ETRAXFS - help - This is a bitmask (18 bits) with information of what bits in PB - that a user can change the value on using ioctl's. - Bit set = changeable. - -config ETRAX_PC_CHANGEABLE_DIR - hex "PC user changeable dir mask" - depends on ETRAX_GPIO - default "0x00000" if ETRAXFS - default "0x00000000" if !ETRAXFS - help - This is a bitmask (18 bits) with information of what bits in PC - that a user can change direction on using ioctl's. - Bit set = changeable. - You probably want 0 here, but it depends on your hardware. - -config ETRAX_PC_CHANGEABLE_BITS - hex "PC user changeable bits mask" - depends on ETRAX_GPIO - default "0x00000" if ETRAXFS - default "0x00000000" if ETRAXFS - help - This is a bitmask (18 bits) with information of what bits in PC - that a user can change the value on using ioctl's. - Bit set = changeable. - -config ETRAX_PD_CHANGEABLE_DIR - hex "PD user changeable dir mask" - depends on ETRAX_GPIO && ETRAXFS - default "0x00000" - help - This is a bitmask (18 bits) with information of what bits in PD - that a user can change direction on using ioctl's. - Bit set = changeable. - You probably want 0x00000 here, but it depends on your hardware. - -config ETRAX_PD_CHANGEABLE_BITS - hex "PD user changeable bits mask" - depends on ETRAX_GPIO && ETRAXFS - default "0x00000" - help - This is a bitmask (18 bits) with information of what bits in PD - that a user can change the value on using ioctl's. - Bit set = changeable. - -config ETRAX_PE_CHANGEABLE_DIR - hex "PE user changeable dir mask" - depends on ETRAX_GPIO && ETRAXFS - default "0x00000" - help - This is a bitmask (18 bits) with information of what bits in PE - that a user can change direction on using ioctl's. - Bit set = changeable. - You probably want 0x00000 here, but it depends on your hardware. - -config ETRAX_PE_CHANGEABLE_BITS - hex "PE user changeable bits mask" - depends on ETRAX_GPIO && ETRAXFS - default "0x00000" - help - This is a bitmask (18 bits) with information of what bits in PE - that a user can change the value on using ioctl's. - Bit set = changeable. - -config ETRAX_PV_CHANGEABLE_DIR - hex "PV user changeable dir mask" - depends on ETRAX_VIRTUAL_GPIO - default "0x0000" - help - This is a bitmask (16 bits) with information of what bits in PV - that a user can change direction on using ioctl's. - Bit set = changeable. - You probably want 0x0000 here, but it depends on your hardware. - -config ETRAX_PV_CHANGEABLE_BITS - hex "PV user changeable bits mask" - depends on ETRAX_VIRTUAL_GPIO - default "0x0000" - help - This is a bitmask (16 bits) with information of what bits in PV - that a user can change the value on using ioctl's. - Bit set = changeable. - config ETRAX_CARDBUS bool "Cardbus support" depends on ETRAX_ARCH_V32 diff --git a/arch/cris/arch-v32/drivers/mach-a3/Makefile b/arch/cris/arch-v32/drivers/mach-a3/Makefile index 5c6d2a2..59028d0 100644 --- a/arch/cris/arch-v32/drivers/mach-a3/Makefile +++ b/arch/cris/arch-v32/drivers/mach-a3/Makefile @@ -3,4 +3,3 @@ # obj-$(CONFIG_ETRAX_NANDFLASH) += nandflash.o -obj-$(CONFIG_ETRAX_GPIO) += gpio.o diff --git a/arch/cris/arch-v32/drivers/mach-a3/gpio.c b/arch/cris/arch-v32/drivers/mach-a3/gpio.c deleted file mode 100644 index 74f9fe8..0000000 --- a/arch/cris/arch-v32/drivers/mach-a3/gpio.c +++ /dev/null @@ -1,999 +0,0 @@ -/* - * Artec-3 general port I/O device - * - * Copyright (c) 2007 Axis Communications AB - * - * Authors: Bjorn Wesen (initial version) - * Ola Knutsson (LED handling) - * Johan Adolfsson (read/set directions, write, port G, - * port to ETRAX FS. - * Ricard Wanderlof (PWM for Artpec-3) - * - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include -#include - -#ifdef CONFIG_ETRAX_VIRTUAL_GPIO -#include "../i2c.h" - -#define VIRT_I2C_ADDR 0x40 -#endif - -/* The following gio ports on ARTPEC-3 is available: - * pa 32 bits - * pb 32 bits - * pc 16 bits - * each port has a rw_px_dout, r_px_din and rw_px_oe register. - */ - -#define GPIO_MAJOR 120 /* experimental MAJOR number */ - -#define I2C_INTERRUPT_BITS 0x300 /* i2c0_done and i2c1_done bits */ - -#define D(x) - -#if 0 -static int dp_cnt; -#define DP(x) \ - do { \ - dp_cnt++; \ - if (dp_cnt % 1000 == 0) \ - x; \ - } while (0) -#else -#define DP(x) -#endif - -static DEFINE_MUTEX(gpio_mutex); -static char gpio_name[] = "etrax gpio"; - -#ifdef CONFIG_ETRAX_VIRTUAL_GPIO -static int virtual_gpio_ioctl(struct file *file, unsigned int cmd, - unsigned long arg); -#endif -static long gpio_ioctl(struct file *file, unsigned int cmd, unsigned long arg); -static ssize_t gpio_write(struct file *file, const char __user *buf, - size_t count, loff_t *off); -static int gpio_open(struct inode *inode, struct file *filp); -static int gpio_release(struct inode *inode, struct file *filp); -static unsigned int gpio_poll(struct file *filp, - struct poll_table_struct *wait); - -/* private data per open() of this driver */ - -struct gpio_private { - struct gpio_private *next; - /* The IO_CFG_WRITE_MODE_VALUE only support 8 bits: */ - unsigned char clk_mask; - unsigned char data_mask; - unsigned char write_msb; - unsigned char pad1; - /* These fields are generic */ - unsigned long highalarm, lowalarm; - wait_queue_head_t alarm_wq; - int minor; -}; - -static void gpio_set_alarm(struct gpio_private *priv); -static int gpio_leds_ioctl(unsigned int cmd, unsigned long arg); -static int gpio_pwm_ioctl(struct gpio_private *priv, unsigned int cmd, - unsigned long arg); - - -/* linked list of alarms to check for */ - -static struct gpio_private *alarmlist; - -static int wanted_interrupts; - -static DEFINE_SPINLOCK(gpio_lock); - -#define NUM_PORTS (GPIO_MINOR_LAST+1) -#define GIO_REG_RD_ADDR(reg) \ - (unsigned long *)(regi_gio + REG_RD_ADDR_gio_##reg) -#define GIO_REG_WR_ADDR(reg) \ - (unsigned long *)(regi_gio + REG_WR_ADDR_gio_##reg) -static unsigned long led_dummy; -static unsigned long port_d_dummy; /* Only input on Artpec-3 */ -#ifdef CONFIG_ETRAX_VIRTUAL_GPIO -static unsigned long port_e_dummy; /* Non existent on Artpec-3 */ -static unsigned long virtual_dummy; -static unsigned long virtual_rw_pv_oe = CONFIG_ETRAX_DEF_GIO_PV_OE; -static unsigned short cached_virtual_gpio_read; -#endif - -static unsigned long *data_out[NUM_PORTS] = { - GIO_REG_WR_ADDR(rw_pa_dout), - GIO_REG_WR_ADDR(rw_pb_dout), - &led_dummy, - GIO_REG_WR_ADDR(rw_pc_dout), - &port_d_dummy, -#ifdef CONFIG_ETRAX_VIRTUAL_GPIO - &port_e_dummy, - &virtual_dummy, -#endif -}; - -static unsigned long *data_in[NUM_PORTS] = { - GIO_REG_RD_ADDR(r_pa_din), - GIO_REG_RD_ADDR(r_pb_din), - &led_dummy, - GIO_REG_RD_ADDR(r_pc_din), - GIO_REG_RD_ADDR(r_pd_din), -#ifdef CONFIG_ETRAX_VIRTUAL_GPIO - &port_e_dummy, - &virtual_dummy, -#endif -}; - -static unsigned long changeable_dir[NUM_PORTS] = { - CONFIG_ETRAX_PA_CHANGEABLE_DIR, - CONFIG_ETRAX_PB_CHANGEABLE_DIR, - 0, - CONFIG_ETRAX_PC_CHANGEABLE_DIR, - 0, -#ifdef CONFIG_ETRAX_VIRTUAL_GPIO - 0, - CONFIG_ETRAX_PV_CHANGEABLE_DIR, -#endif -}; - -static unsigned long changeable_bits[NUM_PORTS] = { - CONFIG_ETRAX_PA_CHANGEABLE_BITS, - CONFIG_ETRAX_PB_CHANGEABLE_BITS, - 0, - CONFIG_ETRAX_PC_CHANGEABLE_BITS, - 0, -#ifdef CONFIG_ETRAX_VIRTUAL_GPIO - 0, - CONFIG_ETRAX_PV_CHANGEABLE_BITS, -#endif -}; - -static unsigned long *dir_oe[NUM_PORTS] = { - GIO_REG_WR_ADDR(rw_pa_oe), - GIO_REG_WR_ADDR(rw_pb_oe), - &led_dummy, - GIO_REG_WR_ADDR(rw_pc_oe), - &port_d_dummy, -#ifdef CONFIG_ETRAX_VIRTUAL_GPIO - &port_e_dummy, - &virtual_rw_pv_oe, -#endif -}; - -static void gpio_set_alarm(struct gpio_private *priv) -{ - int bit; - int intr_cfg; - int mask; - int pins; - unsigned long flags; - - spin_lock_irqsave(&gpio_lock, flags); - intr_cfg = REG_RD_INT(gio, regi_gio, rw_intr_cfg); - pins = REG_RD_INT(gio, regi_gio, rw_intr_pins); - mask = REG_RD_INT(gio, regi_gio, rw_intr_mask) & I2C_INTERRUPT_BITS; - - for (bit = 0; bit < 32; bit++) { - int intr = bit % 8; - int pin = bit / 8; - if (priv->minor < GPIO_MINOR_LEDS) - pin += priv->minor * 4; - else - pin += (priv->minor - 1) * 4; - - if (priv->highalarm & (1<lowalarm & (1<private_data; - unsigned long data; - unsigned long tmp; - - if (priv->minor >= GPIO_MINOR_PWM0 && - priv->minor <= GPIO_MINOR_LAST_PWM) - return 0; - - poll_wait(file, &priv->alarm_wq, wait); - if (priv->minor <= GPIO_MINOR_D) { - data = readl(data_in[priv->minor]); - REG_WR_INT(gio, regi_gio, rw_ack_intr, wanted_interrupts); - tmp = REG_RD_INT(gio, regi_gio, rw_intr_mask); - tmp &= I2C_INTERRUPT_BITS; - tmp |= wanted_interrupts; - REG_WR_INT(gio, regi_gio, rw_intr_mask, tmp); - } else - return 0; - - if ((data & priv->highalarm) || (~data & priv->lowalarm)) - mask = POLLIN|POLLRDNORM; - - DP(printk(KERN_DEBUG "gpio_poll ready: mask 0x%08X\n", mask)); - return mask; -} - -static irqreturn_t gpio_interrupt(int irq, void *dev_id) -{ - reg_gio_rw_intr_mask intr_mask; - reg_gio_r_masked_intr masked_intr; - reg_gio_rw_ack_intr ack_intr; - unsigned long flags; - unsigned long tmp; - unsigned long tmp2; -#ifdef CONFIG_ETRAX_VIRTUAL_GPIO - unsigned char enable_gpiov_ack = 0; -#endif - - /* Find what PA interrupts are active */ - masked_intr = REG_RD(gio, regi_gio, r_masked_intr); - tmp = REG_TYPE_CONV(unsigned long, reg_gio_r_masked_intr, masked_intr); - - /* Find those that we have enabled */ - spin_lock_irqsave(&gpio_lock, flags); - tmp &= wanted_interrupts; - spin_unlock_irqrestore(&gpio_lock, flags); - -#ifdef CONFIG_ETRAX_VIRTUAL_GPIO - /* Something changed on virtual GPIO. Interrupt is acked by - * reading the device. - */ - if (tmp & (1 << CONFIG_ETRAX_VIRTUAL_GPIO_INTERRUPT_PA_PIN)) { - i2c_read(VIRT_I2C_ADDR, (void *)&cached_virtual_gpio_read, - sizeof(cached_virtual_gpio_read)); - enable_gpiov_ack = 1; - } -#endif - - /* Ack them */ - ack_intr = REG_TYPE_CONV(reg_gio_rw_ack_intr, unsigned long, tmp); - REG_WR(gio, regi_gio, rw_ack_intr, ack_intr); - - /* Disable those interrupts.. */ - intr_mask = REG_RD(gio, regi_gio, rw_intr_mask); - tmp2 = REG_TYPE_CONV(unsigned long, reg_gio_rw_intr_mask, intr_mask); - tmp2 &= ~tmp; -#ifdef CONFIG_ETRAX_VIRTUAL_GPIO - /* Do not disable interrupt on virtual GPIO. Changes on virtual - * pins are only noticed by an interrupt. - */ - if (enable_gpiov_ack) - tmp2 |= (1 << CONFIG_ETRAX_VIRTUAL_GPIO_INTERRUPT_PA_PIN); -#endif - intr_mask = REG_TYPE_CONV(reg_gio_rw_intr_mask, unsigned long, tmp2); - REG_WR(gio, regi_gio, rw_intr_mask, intr_mask); - - return IRQ_RETVAL(tmp); -} - -static void gpio_write_bit(unsigned long *port, unsigned char data, int bit, - unsigned char clk_mask, unsigned char data_mask) -{ - unsigned long shadow = readl(port) & ~clk_mask; - writel(shadow, port); - if (data & 1 << bit) - shadow |= data_mask; - else - shadow &= ~data_mask; - writel(shadow, port); - /* For FPGA: min 5.0ns (DCC) before CCLK high */ - shadow |= clk_mask; - writel(shadow, port); -} - -static void gpio_write_byte(struct gpio_private *priv, unsigned long *port, - unsigned char data) -{ - int i; - - if (priv->write_msb) - for (i = 7; i >= 0; i--) - gpio_write_bit(port, data, i, priv->clk_mask, - priv->data_mask); - else - for (i = 0; i <= 7; i++) - gpio_write_bit(port, data, i, priv->clk_mask, - priv->data_mask); -} - - -static ssize_t gpio_write(struct file *file, const char __user *buf, - size_t count, loff_t *off) -{ - struct gpio_private *priv = file->private_data; - unsigned long flags; - ssize_t retval = count; - /* Only bits 0-7 may be used for write operations but allow all - devices except leds... */ -#ifdef CONFIG_ETRAX_VIRTUAL_GPIO - if (priv->minor == GPIO_MINOR_V) - return -EFAULT; -#endif - if (priv->minor == GPIO_MINOR_LEDS) - return -EFAULT; - - if (priv->minor >= GPIO_MINOR_PWM0 && - priv->minor <= GPIO_MINOR_LAST_PWM) - return -EFAULT; - - if (!access_ok(VERIFY_READ, buf, count)) - return -EFAULT; - - /* It must have been configured using the IO_CFG_WRITE_MODE */ - /* Perhaps a better error code? */ - if (priv->clk_mask == 0 || priv->data_mask == 0) - return -EPERM; - - D(printk(KERN_DEBUG "gpio_write: %lu to data 0x%02X clk 0x%02X " - "msb: %i\n", - count, priv->data_mask, priv->clk_mask, priv->write_msb)); - - spin_lock_irqsave(&gpio_lock, flags); - - while (count--) - gpio_write_byte(priv, data_out[priv->minor], *buf++); - - spin_unlock_irqrestore(&gpio_lock, flags); - return retval; -} - -static int gpio_open(struct inode *inode, struct file *filp) -{ - struct gpio_private *priv; - int p = iminor(inode); - - if (p > GPIO_MINOR_LAST_PWM || - (p > GPIO_MINOR_LAST && p < GPIO_MINOR_PWM0)) - return -EINVAL; - - priv = kmalloc(sizeof(struct gpio_private), GFP_KERNEL); - - if (!priv) - return -ENOMEM; - - mutex_lock(&gpio_mutex); - memset(priv, 0, sizeof(*priv)); - - priv->minor = p; - filp->private_data = priv; - - /* initialize the io/alarm struct, not for PWM ports though */ - if (p <= GPIO_MINOR_LAST) { - - priv->clk_mask = 0; - priv->data_mask = 0; - priv->highalarm = 0; - priv->lowalarm = 0; - - init_waitqueue_head(&priv->alarm_wq); - - /* link it into our alarmlist */ - spin_lock_irq(&gpio_lock); - priv->next = alarmlist; - alarmlist = priv; - spin_unlock_irq(&gpio_lock); - } - - mutex_unlock(&gpio_mutex); - return 0; -} - -static int gpio_release(struct inode *inode, struct file *filp) -{ - struct gpio_private *p; - struct gpio_private *todel; - /* local copies while updating them: */ - unsigned long a_high, a_low; - - /* prepare to free private structure */ - todel = filp->private_data; - - /* unlink from alarmlist - only for non-PWM ports though */ - if (todel->minor <= GPIO_MINOR_LAST) { - spin_lock_irq(&gpio_lock); - p = alarmlist; - - if (p == todel) - alarmlist = todel->next; - else { - while (p->next != todel) - p = p->next; - p->next = todel->next; - } - - /* Check if there are still any alarms set */ - p = alarmlist; - a_high = 0; - a_low = 0; - while (p) { - if (p->minor == GPIO_MINOR_A) { -#ifdef CONFIG_ETRAX_VIRTUAL_GPIO - p->lowalarm |= (1 << CONFIG_ETRAX_VIRTUAL_GPIO_INTERRUPT_PA_PIN); -#endif - a_high |= p->highalarm; - a_low |= p->lowalarm; - } - - p = p->next; - } - -#ifdef CONFIG_ETRAX_VIRTUAL_GPIO - /* Variable 'a_low' needs to be set here again - * to ensure that interrupt for virtual GPIO is handled. - */ - a_low |= (1 << CONFIG_ETRAX_VIRTUAL_GPIO_INTERRUPT_PA_PIN); -#endif - - spin_unlock_irq(&gpio_lock); - } - kfree(todel); - - return 0; -} - -/* Main device API. ioctl's to read/set/clear bits, as well as to - * set alarms to wait for using a subsequent select(). - */ - -inline unsigned long setget_input(struct gpio_private *priv, unsigned long arg) -{ - /* Set direction 0=unchanged 1=input, - * return mask with 1=input - */ - unsigned long flags; - unsigned long dir_shadow; - - spin_lock_irqsave(&gpio_lock, flags); - - dir_shadow = readl(dir_oe[priv->minor]) & - ~(arg & changeable_dir[priv->minor]); - writel(dir_shadow, dir_oe[priv->minor]); - - spin_unlock_irqrestore(&gpio_lock, flags); - - if (priv->minor == GPIO_MINOR_C) - dir_shadow ^= 0xFFFF; /* Only 16 bits */ -#ifdef CONFIG_ETRAX_VIRTUAL_GPIO - else if (priv->minor == GPIO_MINOR_V) - dir_shadow ^= 0xFFFF; /* Only 16 bits */ -#endif - else - dir_shadow ^= 0xFFFFFFFF; /* PA, PB and PD 32 bits */ - - return dir_shadow; - -} /* setget_input */ - -static inline unsigned long setget_output(struct gpio_private *priv, - unsigned long arg) -{ - unsigned long flags; - unsigned long dir_shadow; - - spin_lock_irqsave(&gpio_lock, flags); - - dir_shadow = readl(dir_oe[priv->minor]) | - (arg & changeable_dir[priv->minor]); - writel(dir_shadow, dir_oe[priv->minor]); - - spin_unlock_irqrestore(&gpio_lock, flags); - return dir_shadow; -} /* setget_output */ - -static long gpio_ioctl_unlocked(struct file *file, - unsigned int cmd, unsigned long arg) -{ - unsigned long flags; - unsigned long val; - unsigned long shadow; - struct gpio_private *priv = file->private_data; - - if (_IOC_TYPE(cmd) != ETRAXGPIO_IOCTYPE) - return -ENOTTY; - - /* Check for special ioctl handlers first */ - -#ifdef CONFIG_ETRAX_VIRTUAL_GPIO - if (priv->minor == GPIO_MINOR_V) - return virtual_gpio_ioctl(file, cmd, arg); -#endif - - if (priv->minor == GPIO_MINOR_LEDS) - return gpio_leds_ioctl(cmd, arg); - - if (priv->minor >= GPIO_MINOR_PWM0 && - priv->minor <= GPIO_MINOR_LAST_PWM) - return gpio_pwm_ioctl(priv, cmd, arg); - - switch (_IOC_NR(cmd)) { - case IO_READBITS: /* Use IO_READ_INBITS and IO_READ_OUTBITS instead */ - /* Read the port. */ - return readl(data_in[priv->minor]); - case IO_SETBITS: - spin_lock_irqsave(&gpio_lock, flags); - /* Set changeable bits with a 1 in arg. */ - shadow = readl(data_out[priv->minor]) | - (arg & changeable_bits[priv->minor]); - writel(shadow, data_out[priv->minor]); - spin_unlock_irqrestore(&gpio_lock, flags); - break; - case IO_CLRBITS: - spin_lock_irqsave(&gpio_lock, flags); - /* Clear changeable bits with a 1 in arg. */ - shadow = readl(data_out[priv->minor]) & - ~(arg & changeable_bits[priv->minor]); - writel(shadow, data_out[priv->minor]); - spin_unlock_irqrestore(&gpio_lock, flags); - break; - case IO_HIGHALARM: - /* Set alarm when bits with 1 in arg go high. */ - priv->highalarm |= arg; - gpio_set_alarm(priv); - break; - case IO_LOWALARM: - /* Set alarm when bits with 1 in arg go low. */ - priv->lowalarm |= arg; - gpio_set_alarm(priv); - break; - case IO_CLRALARM: - /* Clear alarm for bits with 1 in arg. */ - priv->highalarm &= ~arg; - priv->lowalarm &= ~arg; - gpio_set_alarm(priv); - break; - case IO_READDIR: /* Use IO_SETGET_INPUT/OUTPUT instead! */ - /* Read direction 0=input 1=output */ - return readl(dir_oe[priv->minor]); - - case IO_SETINPUT: /* Use IO_SETGET_INPUT instead! */ - /* Set direction 0=unchanged 1=input, - * return mask with 1=input - */ - return setget_input(priv, arg); - - case IO_SETOUTPUT: /* Use IO_SETGET_OUTPUT instead! */ - /* Set direction 0=unchanged 1=output, - * return mask with 1=output - */ - return setget_output(priv, arg); - - case IO_CFG_WRITE_MODE: - { - int res = -EPERM; - unsigned long dir_shadow, clk_mask, data_mask, write_msb; - - clk_mask = arg & 0xFF; - data_mask = (arg >> 8) & 0xFF; - write_msb = (arg >> 16) & 0x01; - - /* Check if we're allowed to change the bits and - * the direction is correct - */ - spin_lock_irqsave(&gpio_lock, flags); - dir_shadow = readl(dir_oe[priv->minor]); - if ((clk_mask & changeable_bits[priv->minor]) && - (data_mask & changeable_bits[priv->minor]) && - (clk_mask & dir_shadow) && - (data_mask & dir_shadow)) { - priv->clk_mask = clk_mask; - priv->data_mask = data_mask; - priv->write_msb = write_msb; - res = 0; - } - spin_unlock_irqrestore(&gpio_lock, flags); - - return res; - } - case IO_READ_INBITS: - /* *arg is result of reading the input pins */ - val = readl(data_in[priv->minor]); - if (copy_to_user((void __user *)arg, &val, sizeof(val))) - return -EFAULT; - return 0; - case IO_READ_OUTBITS: - /* *arg is result of reading the output shadow */ - val = *data_out[priv->minor]; - if (copy_to_user((void __user *)arg, &val, sizeof(val))) - return -EFAULT; - break; - case IO_SETGET_INPUT: - /* bits set in *arg is set to input, - * *arg updated with current input pins. - */ - if (copy_from_user(&val, (void __user *)arg, sizeof(val))) - return -EFAULT; - val = setget_input(priv, val); - if (copy_to_user((void __user *)arg, &val, sizeof(val))) - return -EFAULT; - break; - case IO_SETGET_OUTPUT: - /* bits set in *arg is set to output, - * *arg updated with current output pins. - */ - if (copy_from_user(&val, (void __user *)arg, sizeof(val))) - return -EFAULT; - val = setget_output(priv, val); - if (copy_to_user((void __user *)arg, &val, sizeof(val))) - return -EFAULT; - break; - default: - return -EINVAL; - } /* switch */ - - return 0; -} - -static long gpio_ioctl(struct file *file, unsigned int cmd, unsigned long arg) -{ - long ret; - - mutex_lock(&gpio_mutex); - ret = gpio_ioctl_unlocked(file, cmd, arg); - mutex_unlock(&gpio_mutex); - - return ret; -} - -#ifdef CONFIG_ETRAX_VIRTUAL_GPIO -static int virtual_gpio_ioctl(struct file *file, unsigned int cmd, - unsigned long arg) -{ - unsigned long flags; - unsigned short val; - unsigned short shadow; - struct gpio_private *priv = file->private_data; - - switch (_IOC_NR(cmd)) { - case IO_SETBITS: - spin_lock_irqsave(&gpio_lock, flags); - /* Set changeable bits with a 1 in arg. */ - i2c_read(VIRT_I2C_ADDR, (void *)&shadow, sizeof(shadow)); - shadow |= ~readl(dir_oe[priv->minor]) | - (arg & changeable_bits[priv->minor]); - i2c_write(VIRT_I2C_ADDR, (void *)&shadow, sizeof(shadow)); - spin_unlock_irqrestore(&gpio_lock, flags); - break; - case IO_CLRBITS: - spin_lock_irqsave(&gpio_lock, flags); - /* Clear changeable bits with a 1 in arg. */ - i2c_read(VIRT_I2C_ADDR, (void *)&shadow, sizeof(shadow)); - shadow |= ~readl(dir_oe[priv->minor]) & - ~(arg & changeable_bits[priv->minor]); - i2c_write(VIRT_I2C_ADDR, (void *)&shadow, sizeof(shadow)); - spin_unlock_irqrestore(&gpio_lock, flags); - break; - case IO_HIGHALARM: - /* Set alarm when bits with 1 in arg go high. */ - priv->highalarm |= arg; - break; - case IO_LOWALARM: - /* Set alarm when bits with 1 in arg go low. */ - priv->lowalarm |= arg; - break; - case IO_CLRALARM: - /* Clear alarm for bits with 1 in arg. */ - priv->highalarm &= ~arg; - priv->lowalarm &= ~arg; - break; - case IO_CFG_WRITE_MODE: - { - unsigned long dir_shadow; - dir_shadow = readl(dir_oe[priv->minor]); - - priv->clk_mask = arg & 0xFF; - priv->data_mask = (arg >> 8) & 0xFF; - priv->write_msb = (arg >> 16) & 0x01; - /* Check if we're allowed to change the bits and - * the direction is correct - */ - if (!((priv->clk_mask & changeable_bits[priv->minor]) && - (priv->data_mask & changeable_bits[priv->minor]) && - (priv->clk_mask & dir_shadow) && - (priv->data_mask & dir_shadow))) { - priv->clk_mask = 0; - priv->data_mask = 0; - return -EPERM; - } - break; - } - case IO_READ_INBITS: - /* *arg is result of reading the input pins */ - val = cached_virtual_gpio_read & ~readl(dir_oe[priv->minor]); - if (copy_to_user((void __user *)arg, &val, sizeof(val))) - return -EFAULT; - return 0; - - case IO_READ_OUTBITS: - /* *arg is result of reading the output shadow */ - i2c_read(VIRT_I2C_ADDR, (void *)&val, sizeof(val)); - val &= readl(dir_oe[priv->minor]); - if (copy_to_user((void __user *)arg, &val, sizeof(val))) - return -EFAULT; - break; - case IO_SETGET_INPUT: - { - /* bits set in *arg is set to input, - * *arg updated with current input pins. - */ - unsigned short input_mask = ~readl(dir_oe[priv->minor]); - if (copy_from_user(&val, (void __user *)arg, sizeof(val))) - return -EFAULT; - val = setget_input(priv, val); - if (copy_to_user((void __user *)arg, &val, sizeof(val))) - return -EFAULT; - if ((input_mask & val) != input_mask) { - /* Input pins changed. All ports desired as input - * should be set to logic 1. - */ - unsigned short change = input_mask ^ val; - i2c_read(VIRT_I2C_ADDR, (void *)&shadow, - sizeof(shadow)); - shadow &= ~change; - shadow |= val; - i2c_write(VIRT_I2C_ADDR, (void *)&shadow, - sizeof(shadow)); - } - break; - } - case IO_SETGET_OUTPUT: - /* bits set in *arg is set to output, - * *arg updated with current output pins. - */ - if (copy_from_user(&val, (void __user *)arg, sizeof(val))) - return -EFAULT; - val = setget_output(priv, val); - if (copy_to_user((void __user *)arg, &val, sizeof(val))) - return -EFAULT; - break; - default: - return -EINVAL; - } /* switch */ - return 0; -} -#endif /* CONFIG_ETRAX_VIRTUAL_GPIO */ - -static int gpio_leds_ioctl(unsigned int cmd, unsigned long arg) -{ - unsigned char green; - unsigned char red; - - switch (_IOC_NR(cmd)) { - case IO_LEDACTIVE_SET: - green = ((unsigned char) arg) & 1; - red = (((unsigned char) arg) >> 1) & 1; - CRIS_LED_ACTIVE_SET_G(green); - CRIS_LED_ACTIVE_SET_R(red); - break; - - default: - return -EINVAL; - } /* switch */ - - return 0; -} - -static int gpio_pwm_set_mode(unsigned long arg, int pwm_port) -{ - int pinmux_pwm = pinmux_pwm0 + pwm_port; - int mode; - reg_gio_rw_pwm0_ctrl rw_pwm_ctrl = { - .ccd_val = 0, - .ccd_override = regk_gio_no, - .mode = regk_gio_no - }; - int allocstatus; - - if (get_user(mode, &((struct io_pwm_set_mode *) arg)->mode)) - return -EFAULT; - rw_pwm_ctrl.mode = mode; - if (mode != PWM_OFF) - allocstatus = crisv32_pinmux_alloc_fixed(pinmux_pwm); - else - allocstatus = crisv32_pinmux_dealloc_fixed(pinmux_pwm); - if (allocstatus) - return allocstatus; - REG_WRITE(reg_gio_rw_pwm0_ctrl, REG_ADDR(gio, regi_gio, rw_pwm0_ctrl) + - 12 * pwm_port, rw_pwm_ctrl); - return 0; -} - -static int gpio_pwm_set_period(unsigned long arg, int pwm_port) -{ - struct io_pwm_set_period periods; - reg_gio_rw_pwm0_var rw_pwm_widths; - - if (copy_from_user(&periods, (void __user *)arg, sizeof(periods))) - return -EFAULT; - if (periods.lo > 8191 || periods.hi > 8191) - return -EINVAL; - rw_pwm_widths.lo = periods.lo; - rw_pwm_widths.hi = periods.hi; - REG_WRITE(reg_gio_rw_pwm0_var, REG_ADDR(gio, regi_gio, rw_pwm0_var) + - 12 * pwm_port, rw_pwm_widths); - return 0; -} - -static int gpio_pwm_set_duty(unsigned long arg, int pwm_port) -{ - unsigned int duty; - reg_gio_rw_pwm0_data rw_pwm_duty; - - if (get_user(duty, &((struct io_pwm_set_duty *) arg)->duty)) - return -EFAULT; - if (duty > 255) - return -EINVAL; - rw_pwm_duty.data = duty; - REG_WRITE(reg_gio_rw_pwm0_data, REG_ADDR(gio, regi_gio, rw_pwm0_data) + - 12 * pwm_port, rw_pwm_duty); - return 0; -} - -static int gpio_pwm_ioctl(struct gpio_private *priv, unsigned int cmd, - unsigned long arg) -{ - int pwm_port = priv->minor - GPIO_MINOR_PWM0; - - switch (_IOC_NR(cmd)) { - case IO_PWM_SET_MODE: - return gpio_pwm_set_mode(arg, pwm_port); - case IO_PWM_SET_PERIOD: - return gpio_pwm_set_period(arg, pwm_port); - case IO_PWM_SET_DUTY: - return gpio_pwm_set_duty(arg, pwm_port); - default: - return -EINVAL; - } - return 0; -} - -static const struct file_operations gpio_fops = { - .owner = THIS_MODULE, - .poll = gpio_poll, - .unlocked_ioctl = gpio_ioctl, - .write = gpio_write, - .open = gpio_open, - .release = gpio_release, - .llseek = noop_llseek, -}; - -#ifdef CONFIG_ETRAX_VIRTUAL_GPIO -static void __init virtual_gpio_init(void) -{ - reg_gio_rw_intr_cfg intr_cfg; - reg_gio_rw_intr_mask intr_mask; - unsigned short shadow; - - shadow = ~virtual_rw_pv_oe; /* Input ports should be set to logic 1 */ - shadow |= CONFIG_ETRAX_DEF_GIO_PV_OUT; - i2c_write(VIRT_I2C_ADDR, (void *)&shadow, sizeof(shadow)); - - /* Set interrupt mask and on what state the interrupt shall trigger. - * For virtual gpio the interrupt shall trigger on logic '0'. - */ - intr_cfg = REG_RD(gio, regi_gio, rw_intr_cfg); - intr_mask = REG_RD(gio, regi_gio, rw_intr_mask); - - switch (CONFIG_ETRAX_VIRTUAL_GPIO_INTERRUPT_PA_PIN) { - case 0: - intr_cfg.pa0 = regk_gio_lo; - intr_mask.pa0 = regk_gio_yes; - break; - case 1: - intr_cfg.pa1 = regk_gio_lo; - intr_mask.pa1 = regk_gio_yes; - break; - case 2: - intr_cfg.pa2 = regk_gio_lo; - intr_mask.pa2 = regk_gio_yes; - break; - case 3: - intr_cfg.pa3 = regk_gio_lo; - intr_mask.pa3 = regk_gio_yes; - break; - case 4: - intr_cfg.pa4 = regk_gio_lo; - intr_mask.pa4 = regk_gio_yes; - break; - case 5: - intr_cfg.pa5 = regk_gio_lo; - intr_mask.pa5 = regk_gio_yes; - break; - case 6: - intr_cfg.pa6 = regk_gio_lo; - intr_mask.pa6 = regk_gio_yes; - break; - case 7: - intr_cfg.pa7 = regk_gio_lo; - intr_mask.pa7 = regk_gio_yes; - break; - } - - REG_WR(gio, regi_gio, rw_intr_cfg, intr_cfg); - REG_WR(gio, regi_gio, rw_intr_mask, intr_mask); -} -#endif - -/* main driver initialization routine, called from mem.c */ - -static int __init gpio_init(void) -{ - int res; - - printk(KERN_INFO "ETRAX FS GPIO driver v2.7, (c) 2003-2008 " - "Axis Communications AB\n"); - - /* do the formalities */ - - res = register_chrdev(GPIO_MAJOR, gpio_name, &gpio_fops); - if (res < 0) { - printk(KERN_ERR "gpio: couldn't get a major number.\n"); - return res; - } - - /* Clear all leds */ - CRIS_LED_NETWORK_GRP0_SET(0); - CRIS_LED_NETWORK_GRP1_SET(0); - CRIS_LED_ACTIVE_SET(0); - CRIS_LED_DISK_READ(0); - CRIS_LED_DISK_WRITE(0); - - int res2 = request_irq(GIO_INTR_VECT, gpio_interrupt, - IRQF_SHARED, "gpio", &alarmlist); - if (res2) { - printk(KERN_ERR "err: irq for gpio\n"); - return res2; - } - - /* No IRQs by default. */ - REG_WR_INT(gio, regi_gio, rw_intr_pins, 0); - -#ifdef CONFIG_ETRAX_VIRTUAL_GPIO - virtual_gpio_init(); -#endif - - return res; -} - -/* this makes sure that gpio_init is called during kernel boot */ - -module_init(gpio_init); diff --git a/arch/cris/arch-v32/drivers/mach-fs/Makefile b/arch/cris/arch-v32/drivers/mach-fs/Makefile index 5c6d2a2..59028d0 100644 --- a/arch/cris/arch-v32/drivers/mach-fs/Makefile +++ b/arch/cris/arch-v32/drivers/mach-fs/Makefile @@ -3,4 +3,3 @@ # obj-$(CONFIG_ETRAX_NANDFLASH) += nandflash.o -obj-$(CONFIG_ETRAX_GPIO) += gpio.o diff --git a/arch/cris/arch-v32/drivers/mach-fs/gpio.c b/arch/cris/arch-v32/drivers/mach-fs/gpio.c deleted file mode 100644 index 009f4ee..0000000 --- a/arch/cris/arch-v32/drivers/mach-fs/gpio.c +++ /dev/null @@ -1,979 +0,0 @@ -/* - * ETRAX CRISv32 general port I/O device - * - * Copyright (c) 1999-2006 Axis Communications AB - * - * Authors: Bjorn Wesen (initial version) - * Ola Knutsson (LED handling) - * Johan Adolfsson (read/set directions, write, port G, - * port to ETRAX FS. - * - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include - -#ifdef CONFIG_ETRAX_VIRTUAL_GPIO -#include "../i2c.h" - -#define VIRT_I2C_ADDR 0x40 -#endif - -/* The following gio ports on ETRAX FS is available: - * pa 8 bits, supports interrupts off, hi, low, set, posedge, negedge anyedge - * pb 18 bits - * pc 18 bits - * pd 18 bits - * pe 18 bits - * each port has a rw_px_dout, r_px_din and rw_px_oe register. - */ - -#define GPIO_MAJOR 120 /* experimental MAJOR number */ - -#define D(x) - -#if 0 -static int dp_cnt; -#define DP(x) \ - do { \ - dp_cnt++; \ - if (dp_cnt % 1000 == 0) \ - x; \ - } while (0) -#else -#define DP(x) -#endif - -static DEFINE_MUTEX(gpio_mutex); -static char gpio_name[] = "etrax gpio"; - -#if 0 -static wait_queue_head_t *gpio_wq; -#endif - -#ifdef CONFIG_ETRAX_VIRTUAL_GPIO -static int virtual_gpio_ioctl(struct file *file, unsigned int cmd, - unsigned long arg); -#endif -static long gpio_ioctl(struct file *file, unsigned int cmd, unsigned long arg); -static ssize_t gpio_write(struct file *file, const char *buf, size_t count, - loff_t *off); -static int gpio_open(struct inode *inode, struct file *filp); -static int gpio_release(struct inode *inode, struct file *filp); -static unsigned int gpio_poll(struct file *filp, - struct poll_table_struct *wait); - -/* private data per open() of this driver */ - -struct gpio_private { - struct gpio_private *next; - /* The IO_CFG_WRITE_MODE_VALUE only support 8 bits: */ - unsigned char clk_mask; - unsigned char data_mask; - unsigned char write_msb; - unsigned char pad1; - /* These fields are generic */ - unsigned long highalarm, lowalarm; - wait_queue_head_t alarm_wq; - int minor; -}; - -/* linked list of alarms to check for */ - -static struct gpio_private *alarmlist; - -static int gpio_some_alarms; /* Set if someone uses alarm */ -static unsigned long gpio_pa_high_alarms; -static unsigned long gpio_pa_low_alarms; - -static DEFINE_SPINLOCK(alarm_lock); - -#define NUM_PORTS (GPIO_MINOR_LAST+1) -#define GIO_REG_RD_ADDR(reg) \ - (volatile unsigned long *)(regi_gio + REG_RD_ADDR_gio_##reg) -#define GIO_REG_WR_ADDR(reg) \ - (volatile unsigned long *)(regi_gio + REG_RD_ADDR_gio_##reg) -unsigned long led_dummy; -#ifdef CONFIG_ETRAX_VIRTUAL_GPIO -static unsigned long virtual_dummy; -static unsigned long virtual_rw_pv_oe = CONFIG_ETRAX_DEF_GIO_PV_OE; -static unsigned short cached_virtual_gpio_read; -#endif - -static volatile unsigned long *data_out[NUM_PORTS] = { - GIO_REG_WR_ADDR(rw_pa_dout), - GIO_REG_WR_ADDR(rw_pb_dout), - &led_dummy, - GIO_REG_WR_ADDR(rw_pc_dout), - GIO_REG_WR_ADDR(rw_pd_dout), - GIO_REG_WR_ADDR(rw_pe_dout), -#ifdef CONFIG_ETRAX_VIRTUAL_GPIO - &virtual_dummy, -#endif -}; - -static volatile unsigned long *data_in[NUM_PORTS] = { - GIO_REG_RD_ADDR(r_pa_din), - GIO_REG_RD_ADDR(r_pb_din), - &led_dummy, - GIO_REG_RD_ADDR(r_pc_din), - GIO_REG_RD_ADDR(r_pd_din), - GIO_REG_RD_ADDR(r_pe_din), -#ifdef CONFIG_ETRAX_VIRTUAL_GPIO - &virtual_dummy, -#endif -}; - -static unsigned long changeable_dir[NUM_PORTS] = { - CONFIG_ETRAX_PA_CHANGEABLE_DIR, - CONFIG_ETRAX_PB_CHANGEABLE_DIR, - 0, - CONFIG_ETRAX_PC_CHANGEABLE_DIR, - CONFIG_ETRAX_PD_CHANGEABLE_DIR, - CONFIG_ETRAX_PE_CHANGEABLE_DIR, -#ifdef CONFIG_ETRAX_VIRTUAL_GPIO - CONFIG_ETRAX_PV_CHANGEABLE_DIR, -#endif -}; - -static unsigned long changeable_bits[NUM_PORTS] = { - CONFIG_ETRAX_PA_CHANGEABLE_BITS, - CONFIG_ETRAX_PB_CHANGEABLE_BITS, - 0, - CONFIG_ETRAX_PC_CHANGEABLE_BITS, - CONFIG_ETRAX_PD_CHANGEABLE_BITS, - CONFIG_ETRAX_PE_CHANGEABLE_BITS, -#ifdef CONFIG_ETRAX_VIRTUAL_GPIO - CONFIG_ETRAX_PV_CHANGEABLE_BITS, -#endif -}; - -static volatile unsigned long *dir_oe[NUM_PORTS] = { - GIO_REG_WR_ADDR(rw_pa_oe), - GIO_REG_WR_ADDR(rw_pb_oe), - &led_dummy, - GIO_REG_WR_ADDR(rw_pc_oe), - GIO_REG_WR_ADDR(rw_pd_oe), - GIO_REG_WR_ADDR(rw_pe_oe), -#ifdef CONFIG_ETRAX_VIRTUAL_GPIO - &virtual_rw_pv_oe, -#endif -}; - - - -static unsigned int gpio_poll(struct file *file, struct poll_table_struct *wait) -{ - unsigned int mask = 0; - struct gpio_private *priv = file->private_data; - unsigned long data; - poll_wait(file, &priv->alarm_wq, wait); - if (priv->minor == GPIO_MINOR_A) { - reg_gio_rw_intr_cfg intr_cfg; - unsigned long tmp; - unsigned long flags; - - local_irq_save(flags); - data = REG_TYPE_CONV(unsigned long, reg_gio_r_pa_din, - REG_RD(gio, regi_gio, r_pa_din)); - /* PA has support for interrupt - * lets activate high for those low and with highalarm set - */ - intr_cfg = REG_RD(gio, regi_gio, rw_intr_cfg); - - tmp = ~data & priv->highalarm & 0xFF; - if (tmp & (1 << 0)) - intr_cfg.pa0 = regk_gio_hi; - if (tmp & (1 << 1)) - intr_cfg.pa1 = regk_gio_hi; - if (tmp & (1 << 2)) - intr_cfg.pa2 = regk_gio_hi; - if (tmp & (1 << 3)) - intr_cfg.pa3 = regk_gio_hi; - if (tmp & (1 << 4)) - intr_cfg.pa4 = regk_gio_hi; - if (tmp & (1 << 5)) - intr_cfg.pa5 = regk_gio_hi; - if (tmp & (1 << 6)) - intr_cfg.pa6 = regk_gio_hi; - if (tmp & (1 << 7)) - intr_cfg.pa7 = regk_gio_hi; - /* - * lets activate low for those high and with lowalarm set - */ - tmp = data & priv->lowalarm & 0xFF; - if (tmp & (1 << 0)) - intr_cfg.pa0 = regk_gio_lo; - if (tmp & (1 << 1)) - intr_cfg.pa1 = regk_gio_lo; - if (tmp & (1 << 2)) - intr_cfg.pa2 = regk_gio_lo; - if (tmp & (1 << 3)) - intr_cfg.pa3 = regk_gio_lo; - if (tmp & (1 << 4)) - intr_cfg.pa4 = regk_gio_lo; - if (tmp & (1 << 5)) - intr_cfg.pa5 = regk_gio_lo; - if (tmp & (1 << 6)) - intr_cfg.pa6 = regk_gio_lo; - if (tmp & (1 << 7)) - intr_cfg.pa7 = regk_gio_lo; - - REG_WR(gio, regi_gio, rw_intr_cfg, intr_cfg); - local_irq_restore(flags); - } else if (priv->minor <= GPIO_MINOR_E) - data = *data_in[priv->minor]; - else - return 0; - - if ((data & priv->highalarm) || (~data & priv->lowalarm)) - mask = POLLIN|POLLRDNORM; - - DP(printk(KERN_DEBUG "gpio_poll ready: mask 0x%08X\n", mask)); - return mask; -} - -int etrax_gpio_wake_up_check(void) -{ - struct gpio_private *priv; - unsigned long data = 0; - unsigned long flags; - int ret = 0; - spin_lock_irqsave(&alarm_lock, flags); - priv = alarmlist; - while (priv) { -#ifdef CONFIG_ETRAX_VIRTUAL_GPIO - if (priv->minor == GPIO_MINOR_V) - data = (unsigned long)cached_virtual_gpio_read; - else { - data = *data_in[priv->minor]; - if (priv->minor == GPIO_MINOR_A) - priv->lowalarm |= (1 << CONFIG_ETRAX_VIRTUAL_GPIO_INTERRUPT_PA_PIN); - } -#else - data = *data_in[priv->minor]; -#endif - if ((data & priv->highalarm) || - (~data & priv->lowalarm)) { - DP(printk(KERN_DEBUG - "etrax_gpio_wake_up_check %i\n", priv->minor)); - wake_up_interruptible(&priv->alarm_wq); - ret = 1; - } - priv = priv->next; - } - spin_unlock_irqrestore(&alarm_lock, flags); - return ret; -} - -static irqreturn_t -gpio_poll_timer_interrupt(int irq, void *dev_id) -{ - if (gpio_some_alarms) - return IRQ_RETVAL(etrax_gpio_wake_up_check()); - return IRQ_NONE; -} - -static irqreturn_t -gpio_pa_interrupt(int irq, void *dev_id) -{ - reg_gio_rw_intr_mask intr_mask; - reg_gio_r_masked_intr masked_intr; - reg_gio_rw_ack_intr ack_intr; - unsigned long tmp; - unsigned long tmp2; -#ifdef CONFIG_ETRAX_VIRTUAL_GPIO - unsigned char enable_gpiov_ack = 0; -#endif - - /* Find what PA interrupts are active */ - masked_intr = REG_RD(gio, regi_gio, r_masked_intr); - tmp = REG_TYPE_CONV(unsigned long, reg_gio_r_masked_intr, masked_intr); - - /* Find those that we have enabled */ - spin_lock(&alarm_lock); - tmp &= (gpio_pa_high_alarms | gpio_pa_low_alarms); - spin_unlock(&alarm_lock); - -#ifdef CONFIG_ETRAX_VIRTUAL_GPIO - /* Something changed on virtual GPIO. Interrupt is acked by - * reading the device. - */ - if (tmp & (1 << CONFIG_ETRAX_VIRTUAL_GPIO_INTERRUPT_PA_PIN)) { - i2c_read(VIRT_I2C_ADDR, (void *)&cached_virtual_gpio_read, - sizeof(cached_virtual_gpio_read)); - enable_gpiov_ack = 1; - } -#endif - - /* Ack them */ - ack_intr = REG_TYPE_CONV(reg_gio_rw_ack_intr, unsigned long, tmp); - REG_WR(gio, regi_gio, rw_ack_intr, ack_intr); - - /* Disable those interrupts.. */ - intr_mask = REG_RD(gio, regi_gio, rw_intr_mask); - tmp2 = REG_TYPE_CONV(unsigned long, reg_gio_rw_intr_mask, intr_mask); - tmp2 &= ~tmp; -#ifdef CONFIG_ETRAX_VIRTUAL_GPIO - /* Do not disable interrupt on virtual GPIO. Changes on virtual - * pins are only noticed by an interrupt. - */ - if (enable_gpiov_ack) - tmp2 |= (1 << CONFIG_ETRAX_VIRTUAL_GPIO_INTERRUPT_PA_PIN); -#endif - intr_mask = REG_TYPE_CONV(reg_gio_rw_intr_mask, unsigned long, tmp2); - REG_WR(gio, regi_gio, rw_intr_mask, intr_mask); - - if (gpio_some_alarms) - return IRQ_RETVAL(etrax_gpio_wake_up_check()); - return IRQ_NONE; -} - - -static ssize_t gpio_write(struct file *file, const char *buf, size_t count, - loff_t *off) -{ - struct gpio_private *priv = file->private_data; - unsigned char data, clk_mask, data_mask, write_msb; - unsigned long flags; - unsigned long shadow; - volatile unsigned long *port; - ssize_t retval = count; - /* Only bits 0-7 may be used for write operations but allow all - devices except leds... */ -#ifdef CONFIG_ETRAX_VIRTUAL_GPIO - if (priv->minor == GPIO_MINOR_V) - return -EFAULT; -#endif - if (priv->minor == GPIO_MINOR_LEDS) - return -EFAULT; - - if (!access_ok(VERIFY_READ, buf, count)) - return -EFAULT; - clk_mask = priv->clk_mask; - data_mask = priv->data_mask; - /* It must have been configured using the IO_CFG_WRITE_MODE */ - /* Perhaps a better error code? */ - if (clk_mask == 0 || data_mask == 0) - return -EPERM; - write_msb = priv->write_msb; - D(printk(KERN_DEBUG "gpio_write: %lu to data 0x%02X clk 0x%02X " - "msb: %i\n", count, data_mask, clk_mask, write_msb)); - port = data_out[priv->minor]; - - while (count--) { - int i; - data = *buf++; - if (priv->write_msb) { - for (i = 7; i >= 0; i--) { - local_irq_save(flags); - shadow = *port; - *port = shadow &= ~clk_mask; - if (data & 1< GPIO_MINOR_LAST) - return -EINVAL; - - priv = kmalloc(sizeof(struct gpio_private), GFP_KERNEL); - if (!priv) - return -ENOMEM; - - mutex_lock(&gpio_mutex); - memset(priv, 0, sizeof(*priv)); - - priv->minor = p; - - /* initialize the io/alarm struct */ - - priv->clk_mask = 0; - priv->data_mask = 0; - priv->highalarm = 0; - priv->lowalarm = 0; - init_waitqueue_head(&priv->alarm_wq); - - filp->private_data = (void *)priv; - - /* link it into our alarmlist */ - spin_lock_irq(&alarm_lock); - priv->next = alarmlist; - alarmlist = priv; - spin_unlock_irq(&alarm_lock); - - mutex_unlock(&gpio_mutex); - return 0; -} - -static int -gpio_release(struct inode *inode, struct file *filp) -{ - struct gpio_private *p; - struct gpio_private *todel; - /* local copies while updating them: */ - unsigned long a_high, a_low; - unsigned long some_alarms; - - /* unlink from alarmlist and free the private structure */ - - spin_lock_irq(&alarm_lock); - p = alarmlist; - todel = filp->private_data; - - if (p == todel) { - alarmlist = todel->next; - } else { - while (p->next != todel) - p = p->next; - p->next = todel->next; - } - - kfree(todel); - /* Check if there are still any alarms set */ - p = alarmlist; - some_alarms = 0; - a_high = 0; - a_low = 0; - while (p) { - if (p->minor == GPIO_MINOR_A) { -#ifdef CONFIG_ETRAX_VIRTUAL_GPIO - p->lowalarm |= (1 << CONFIG_ETRAX_VIRTUAL_GPIO_INTERRUPT_PA_PIN); -#endif - a_high |= p->highalarm; - a_low |= p->lowalarm; - } - - if (p->highalarm | p->lowalarm) - some_alarms = 1; - p = p->next; - } - -#ifdef CONFIG_ETRAX_VIRTUAL_GPIO - /* Variables 'some_alarms' and 'a_low' needs to be set here again - * to ensure that interrupt for virtual GPIO is handled. - */ - some_alarms = 1; - a_low |= (1 << CONFIG_ETRAX_VIRTUAL_GPIO_INTERRUPT_PA_PIN); -#endif - - gpio_some_alarms = some_alarms; - gpio_pa_high_alarms = a_high; - gpio_pa_low_alarms = a_low; - spin_unlock_irq(&alarm_lock); - - return 0; -} - -/* Main device API. ioctl's to read/set/clear bits, as well as to - * set alarms to wait for using a subsequent select(). - */ - -inline unsigned long setget_input(struct gpio_private *priv, unsigned long arg) -{ - /* Set direction 0=unchanged 1=input, - * return mask with 1=input - */ - unsigned long flags; - unsigned long dir_shadow; - - local_irq_save(flags); - dir_shadow = *dir_oe[priv->minor]; - dir_shadow &= ~(arg & changeable_dir[priv->minor]); - *dir_oe[priv->minor] = dir_shadow; - local_irq_restore(flags); - - if (priv->minor == GPIO_MINOR_A) - dir_shadow ^= 0xFF; /* Only 8 bits */ -#ifdef CONFIG_ETRAX_VIRTUAL_GPIO - else if (priv->minor == GPIO_MINOR_V) - dir_shadow ^= 0xFFFF; /* Only 16 bits */ -#endif - else - dir_shadow ^= 0x3FFFF; /* Only 18 bits */ - return dir_shadow; - -} /* setget_input */ - -inline unsigned long setget_output(struct gpio_private *priv, unsigned long arg) -{ - unsigned long flags; - unsigned long dir_shadow; - - local_irq_save(flags); - dir_shadow = *dir_oe[priv->minor]; - dir_shadow |= (arg & changeable_dir[priv->minor]); - *dir_oe[priv->minor] = dir_shadow; - local_irq_restore(flags); - return dir_shadow; -} /* setget_output */ - -static int gpio_leds_ioctl(unsigned int cmd, unsigned long arg); - -static int -gpio_ioctl_unlocked(struct file *file, unsigned int cmd, unsigned long arg) -{ - unsigned long flags; - unsigned long val; - unsigned long shadow; - struct gpio_private *priv = file->private_data; - if (_IOC_TYPE(cmd) != ETRAXGPIO_IOCTYPE) - return -EINVAL; - -#ifdef CONFIG_ETRAX_VIRTUAL_GPIO - if (priv->minor == GPIO_MINOR_V) - return virtual_gpio_ioctl(file, cmd, arg); -#endif - - switch (_IOC_NR(cmd)) { - case IO_READBITS: /* Use IO_READ_INBITS and IO_READ_OUTBITS instead */ - /* Read the port. */ - return *data_in[priv->minor]; - break; - case IO_SETBITS: - local_irq_save(flags); - /* Set changeable bits with a 1 in arg. */ - shadow = *data_out[priv->minor]; - shadow |= (arg & changeable_bits[priv->minor]); - *data_out[priv->minor] = shadow; - local_irq_restore(flags); - break; - case IO_CLRBITS: - local_irq_save(flags); - /* Clear changeable bits with a 1 in arg. */ - shadow = *data_out[priv->minor]; - shadow &= ~(arg & changeable_bits[priv->minor]); - *data_out[priv->minor] = shadow; - local_irq_restore(flags); - break; - case IO_HIGHALARM: - /* Set alarm when bits with 1 in arg go high. */ - priv->highalarm |= arg; - spin_lock_irqsave(&alarm_lock, flags); - gpio_some_alarms = 1; - if (priv->minor == GPIO_MINOR_A) - gpio_pa_high_alarms |= arg; - spin_unlock_irqrestore(&alarm_lock, flags); - break; - case IO_LOWALARM: - /* Set alarm when bits with 1 in arg go low. */ - priv->lowalarm |= arg; - spin_lock_irqsave(&alarm_lock, flags); - gpio_some_alarms = 1; - if (priv->minor == GPIO_MINOR_A) - gpio_pa_low_alarms |= arg; - spin_unlock_irqrestore(&alarm_lock, flags); - break; - case IO_CLRALARM: - /* Clear alarm for bits with 1 in arg. */ - priv->highalarm &= ~arg; - priv->lowalarm &= ~arg; - spin_lock_irqsave(&alarm_lock, flags); - if (priv->minor == GPIO_MINOR_A) { - if (gpio_pa_high_alarms & arg || - gpio_pa_low_alarms & arg) - /* Must update the gpio_pa_*alarms masks */ - ; - } - spin_unlock_irqrestore(&alarm_lock, flags); - break; - case IO_READDIR: /* Use IO_SETGET_INPUT/OUTPUT instead! */ - /* Read direction 0=input 1=output */ - return *dir_oe[priv->minor]; - case IO_SETINPUT: /* Use IO_SETGET_INPUT instead! */ - /* Set direction 0=unchanged 1=input, - * return mask with 1=input - */ - return setget_input(priv, arg); - break; - case IO_SETOUTPUT: /* Use IO_SETGET_OUTPUT instead! */ - /* Set direction 0=unchanged 1=output, - * return mask with 1=output - */ - return setget_output(priv, arg); - - case IO_CFG_WRITE_MODE: - { - unsigned long dir_shadow; - dir_shadow = *dir_oe[priv->minor]; - - priv->clk_mask = arg & 0xFF; - priv->data_mask = (arg >> 8) & 0xFF; - priv->write_msb = (arg >> 16) & 0x01; - /* Check if we're allowed to change the bits and - * the direction is correct - */ - if (!((priv->clk_mask & changeable_bits[priv->minor]) && - (priv->data_mask & changeable_bits[priv->minor]) && - (priv->clk_mask & dir_shadow) && - (priv->data_mask & dir_shadow))) { - priv->clk_mask = 0; - priv->data_mask = 0; - return -EPERM; - } - break; - } - case IO_READ_INBITS: - /* *arg is result of reading the input pins */ - val = *data_in[priv->minor]; - if (copy_to_user((unsigned long *)arg, &val, sizeof(val))) - return -EFAULT; - return 0; - break; - case IO_READ_OUTBITS: - /* *arg is result of reading the output shadow */ - val = *data_out[priv->minor]; - if (copy_to_user((unsigned long *)arg, &val, sizeof(val))) - return -EFAULT; - break; - case IO_SETGET_INPUT: - /* bits set in *arg is set to input, - * *arg updated with current input pins. - */ - if (copy_from_user(&val, (unsigned long *)arg, sizeof(val))) - return -EFAULT; - val = setget_input(priv, val); - if (copy_to_user((unsigned long *)arg, &val, sizeof(val))) - return -EFAULT; - break; - case IO_SETGET_OUTPUT: - /* bits set in *arg is set to output, - * *arg updated with current output pins. - */ - if (copy_from_user(&val, (unsigned long *)arg, sizeof(val))) - return -EFAULT; - val = setget_output(priv, val); - if (copy_to_user((unsigned long *)arg, &val, sizeof(val))) - return -EFAULT; - break; - default: - if (priv->minor == GPIO_MINOR_LEDS) - return gpio_leds_ioctl(cmd, arg); - else - return -EINVAL; - } /* switch */ - - return 0; -} - -static long gpio_ioctl(struct file *file, unsigned int cmd, unsigned long arg) -{ - long ret; - - mutex_lock(&gpio_mutex); - ret = gpio_ioctl_unlocked(file, cmd, arg); - mutex_unlock(&gpio_mutex); - - return ret; -} - -#ifdef CONFIG_ETRAX_VIRTUAL_GPIO -static int -virtual_gpio_ioctl(struct file *file, unsigned int cmd, unsigned long arg) -{ - unsigned long flags; - unsigned short val; - unsigned short shadow; - struct gpio_private *priv = file->private_data; - - switch (_IOC_NR(cmd)) { - case IO_SETBITS: - local_irq_save(flags); - /* Set changeable bits with a 1 in arg. */ - i2c_read(VIRT_I2C_ADDR, (void *)&shadow, sizeof(shadow)); - shadow |= ~*dir_oe[priv->minor]; - shadow |= (arg & changeable_bits[priv->minor]); - i2c_write(VIRT_I2C_ADDR, (void *)&shadow, sizeof(shadow)); - local_irq_restore(flags); - break; - case IO_CLRBITS: - local_irq_save(flags); - /* Clear changeable bits with a 1 in arg. */ - i2c_read(VIRT_I2C_ADDR, (void *)&shadow, sizeof(shadow)); - shadow |= ~*dir_oe[priv->minor]; - shadow &= ~(arg & changeable_bits[priv->minor]); - i2c_write(VIRT_I2C_ADDR, (void *)&shadow, sizeof(shadow)); - local_irq_restore(flags); - break; - case IO_HIGHALARM: - /* Set alarm when bits with 1 in arg go high. */ - priv->highalarm |= arg; - spin_lock(&alarm_lock); - gpio_some_alarms = 1; - spin_unlock(&alarm_lock); - break; - case IO_LOWALARM: - /* Set alarm when bits with 1 in arg go low. */ - priv->lowalarm |= arg; - spin_lock(&alarm_lock); - gpio_some_alarms = 1; - spin_unlock(&alarm_lock); - break; - case IO_CLRALARM: - /* Clear alarm for bits with 1 in arg. */ - priv->highalarm &= ~arg; - priv->lowalarm &= ~arg; - spin_lock(&alarm_lock); - spin_unlock(&alarm_lock); - break; - case IO_CFG_WRITE_MODE: - { - unsigned long dir_shadow; - dir_shadow = *dir_oe[priv->minor]; - - priv->clk_mask = arg & 0xFF; - priv->data_mask = (arg >> 8) & 0xFF; - priv->write_msb = (arg >> 16) & 0x01; - /* Check if we're allowed to change the bits and - * the direction is correct - */ - if (!((priv->clk_mask & changeable_bits[priv->minor]) && - (priv->data_mask & changeable_bits[priv->minor]) && - (priv->clk_mask & dir_shadow) && - (priv->data_mask & dir_shadow))) { - priv->clk_mask = 0; - priv->data_mask = 0; - return -EPERM; - } - break; - } - case IO_READ_INBITS: - /* *arg is result of reading the input pins */ - val = cached_virtual_gpio_read; - val &= ~*dir_oe[priv->minor]; - if (copy_to_user((unsigned long *)arg, &val, sizeof(val))) - return -EFAULT; - return 0; - break; - case IO_READ_OUTBITS: - /* *arg is result of reading the output shadow */ - i2c_read(VIRT_I2C_ADDR, (void *)&val, sizeof(val)); - val &= *dir_oe[priv->minor]; - if (copy_to_user((unsigned long *)arg, &val, sizeof(val))) - return -EFAULT; - break; - case IO_SETGET_INPUT: - { - /* bits set in *arg is set to input, - * *arg updated with current input pins. - */ - unsigned short input_mask = ~*dir_oe[priv->minor]; - if (copy_from_user(&val, (unsigned long *)arg, sizeof(val))) - return -EFAULT; - val = setget_input(priv, val); - if (copy_to_user((unsigned long *)arg, &val, sizeof(val))) - return -EFAULT; - if ((input_mask & val) != input_mask) { - /* Input pins changed. All ports desired as input - * should be set to logic 1. - */ - unsigned short change = input_mask ^ val; - i2c_read(VIRT_I2C_ADDR, (void *)&shadow, - sizeof(shadow)); - shadow &= ~change; - shadow |= val; - i2c_write(VIRT_I2C_ADDR, (void *)&shadow, - sizeof(shadow)); - } - break; - } - case IO_SETGET_OUTPUT: - /* bits set in *arg is set to output, - * *arg updated with current output pins. - */ - if (copy_from_user(&val, (unsigned long *)arg, sizeof(val))) - return -EFAULT; - val = setget_output(priv, val); - if (copy_to_user((unsigned long *)arg, &val, sizeof(val))) - return -EFAULT; - break; - default: - return -EINVAL; - } /* switch */ - return 0; -} -#endif /* CONFIG_ETRAX_VIRTUAL_GPIO */ - -static int -gpio_leds_ioctl(unsigned int cmd, unsigned long arg) -{ - unsigned char green; - unsigned char red; - - switch (_IOC_NR(cmd)) { - case IO_LEDACTIVE_SET: - green = ((unsigned char) arg) & 1; - red = (((unsigned char) arg) >> 1) & 1; - CRIS_LED_ACTIVE_SET_G(green); - CRIS_LED_ACTIVE_SET_R(red); - break; - - default: - return -EINVAL; - } /* switch */ - - return 0; -} - -static const struct file_operations gpio_fops = { - .owner = THIS_MODULE, - .poll = gpio_poll, - .unlocked_ioctl = gpio_ioctl, - .write = gpio_write, - .open = gpio_open, - .release = gpio_release, - .llseek = noop_llseek, -}; - -#ifdef CONFIG_ETRAX_VIRTUAL_GPIO -static void -virtual_gpio_init(void) -{ - reg_gio_rw_intr_cfg intr_cfg; - reg_gio_rw_intr_mask intr_mask; - unsigned short shadow; - - shadow = ~virtual_rw_pv_oe; /* Input ports should be set to logic 1 */ - shadow |= CONFIG_ETRAX_DEF_GIO_PV_OUT; - i2c_write(VIRT_I2C_ADDR, (void *)&shadow, sizeof(shadow)); - - /* Set interrupt mask and on what state the interrupt shall trigger. - * For virtual gpio the interrupt shall trigger on logic '0'. - */ - intr_cfg = REG_RD(gio, regi_gio, rw_intr_cfg); - intr_mask = REG_RD(gio, regi_gio, rw_intr_mask); - - switch (CONFIG_ETRAX_VIRTUAL_GPIO_INTERRUPT_PA_PIN) { - case 0: - intr_cfg.pa0 = regk_gio_lo; - intr_mask.pa0 = regk_gio_yes; - break; - case 1: - intr_cfg.pa1 = regk_gio_lo; - intr_mask.pa1 = regk_gio_yes; - break; - case 2: - intr_cfg.pa2 = regk_gio_lo; - intr_mask.pa2 = regk_gio_yes; - break; - case 3: - intr_cfg.pa3 = regk_gio_lo; - intr_mask.pa3 = regk_gio_yes; - break; - case 4: - intr_cfg.pa4 = regk_gio_lo; - intr_mask.pa4 = regk_gio_yes; - break; - case 5: - intr_cfg.pa5 = regk_gio_lo; - intr_mask.pa5 = regk_gio_yes; - break; - case 6: - intr_cfg.pa6 = regk_gio_lo; - intr_mask.pa6 = regk_gio_yes; - break; - case 7: - intr_cfg.pa7 = regk_gio_lo; - intr_mask.pa7 = regk_gio_yes; - break; - } - - REG_WR(gio, regi_gio, rw_intr_cfg, intr_cfg); - REG_WR(gio, regi_gio, rw_intr_mask, intr_mask); - - gpio_pa_low_alarms |= (1 << CONFIG_ETRAX_VIRTUAL_GPIO_INTERRUPT_PA_PIN); - gpio_some_alarms = 1; -} -#endif - -/* main driver initialization routine, called from mem.c */ - -static __init int -gpio_init(void) -{ - int res; - - /* do the formalities */ - - res = register_chrdev(GPIO_MAJOR, gpio_name, &gpio_fops); - if (res < 0) { - printk(KERN_ERR "gpio: couldn't get a major number.\n"); - return res; - } - - /* Clear all leds */ - CRIS_LED_NETWORK_GRP0_SET(0); - CRIS_LED_NETWORK_GRP1_SET(0); - CRIS_LED_ACTIVE_SET(0); - CRIS_LED_DISK_READ(0); - CRIS_LED_DISK_WRITE(0); - - printk(KERN_INFO "ETRAX FS GPIO driver v2.5, (c) 2003-2007 " - "Axis Communications AB\n"); - /* We call etrax_gpio_wake_up_check() from timer interrupt */ - if (request_irq(TIMER0_INTR_VECT, gpio_poll_timer_interrupt, - IRQF_SHARED, "gpio poll", &alarmlist)) - printk(KERN_ERR "timer0 irq for gpio\n"); - - if (request_irq(GIO_INTR_VECT, gpio_pa_interrupt, - IRQF_SHARED, "gpio PA", &alarmlist)) - printk(KERN_ERR "PA irq for gpio\n"); - -#ifdef CONFIG_ETRAX_VIRTUAL_GPIO - virtual_gpio_init(); -#endif - - return res; -} - -/* this makes sure that gpio_init is called during kernel boot */ - -module_init(gpio_init); diff --git a/arch/cris/arch-v32/kernel/crisksyms.c b/arch/cris/arch-v32/kernel/crisksyms.c index bde8d1a..b056635 100644 --- a/arch/cris/arch-v32/kernel/crisksyms.c +++ b/arch/cris/arch-v32/kernel/crisksyms.c @@ -3,7 +3,6 @@ #include #include #include -#include /* Functions for allocating DMA channels */ EXPORT_SYMBOL(crisv32_request_dma); @@ -20,8 +19,6 @@ EXPORT_SYMBOL(crisv32_pinmux_alloc); EXPORT_SYMBOL(crisv32_pinmux_alloc_fixed); EXPORT_SYMBOL(crisv32_pinmux_dealloc); EXPORT_SYMBOL(crisv32_pinmux_dealloc_fixed); -EXPORT_SYMBOL(crisv32_io_get_name); -EXPORT_SYMBOL(crisv32_io_get); /* Functions masking/unmasking interrupts */ EXPORT_SYMBOL(crisv32_mask_irq); diff --git a/arch/cris/arch-v32/mach-a3/Makefile b/arch/cris/arch-v32/mach-a3/Makefile index 18a2271..0cc6eeb 100644 --- a/arch/cris/arch-v32/mach-a3/Makefile +++ b/arch/cris/arch-v32/mach-a3/Makefile @@ -2,7 +2,7 @@ # Makefile for the linux kernel. # -obj-y := dma.o pinmux.o io.o arbiter.o +obj-y := dma.o pinmux.o arbiter.o clean: diff --git a/arch/cris/arch-v32/mach-a3/io.c b/arch/cris/arch-v32/mach-a3/io.c deleted file mode 100644 index 090ceb9..0000000 --- a/arch/cris/arch-v32/mach-a3/io.c +++ /dev/null @@ -1,149 +0,0 @@ -/* - * Helper functions for I/O pins. - * - * Copyright (c) 2005-2007 Axis Communications AB. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -struct crisv32_ioport crisv32_ioports[] = { - { - (unsigned long *)REG_ADDR(gio, regi_gio, rw_pa_oe), - (unsigned long *)REG_ADDR(gio, regi_gio, rw_pa_dout), - (unsigned long *)REG_ADDR(gio, regi_gio, r_pa_din), - 32 - }, - { - (unsigned long *)REG_ADDR(gio, regi_gio, rw_pb_oe), - (unsigned long *)REG_ADDR(gio, regi_gio, rw_pb_dout), - (unsigned long *)REG_ADDR(gio, regi_gio, r_pb_din), - 32 - }, - { - (unsigned long *)REG_ADDR(gio, regi_gio, rw_pc_oe), - (unsigned long *)REG_ADDR(gio, regi_gio, rw_pc_dout), - (unsigned long *)REG_ADDR(gio, regi_gio, r_pc_din), - 16 - }, -}; - -#define NBR_OF_PORTS ARRAY_SIZE(crisv32_ioports) - -struct crisv32_iopin crisv32_led_net0_green; -struct crisv32_iopin crisv32_led_net0_red; -struct crisv32_iopin crisv32_led2_green; -struct crisv32_iopin crisv32_led2_red; -struct crisv32_iopin crisv32_led3_green; -struct crisv32_iopin crisv32_led3_red; - -/* Dummy port used when green LED and red LED is on the same bit */ -static unsigned long io_dummy; -static struct crisv32_ioport dummy_port = { - &io_dummy, - &io_dummy, - &io_dummy, - 32 -}; -static struct crisv32_iopin dummy_led = { - &dummy_port, - 0 -}; - -static int __init crisv32_io_init(void) -{ - int ret = 0; - - u32 i; - - /* Locks *should* be dynamically initialized. */ - for (i = 0; i < ARRAY_SIZE(crisv32_ioports); i++) - spin_lock_init(&crisv32_ioports[i].lock); - spin_lock_init(&dummy_port.lock); - - /* Initialize LEDs */ -#if (defined(CONFIG_ETRAX_NBR_LED_GRP_ONE) || defined(CONFIG_ETRAX_NBR_LED_GRP_TWO)) - ret += crisv32_io_get_name(&crisv32_led_net0_green, - CONFIG_ETRAX_LED_G_NET0); - crisv32_io_set_dir(&crisv32_led_net0_green, crisv32_io_dir_out); - if (strcmp(CONFIG_ETRAX_LED_G_NET0, CONFIG_ETRAX_LED_R_NET0)) { - ret += crisv32_io_get_name(&crisv32_led_net0_red, - CONFIG_ETRAX_LED_R_NET0); - crisv32_io_set_dir(&crisv32_led_net0_red, crisv32_io_dir_out); - } else - crisv32_led_net0_red = dummy_led; -#endif - - ret += crisv32_io_get_name(&crisv32_led2_green, CONFIG_ETRAX_V32_LED2G); - ret += crisv32_io_get_name(&crisv32_led2_red, CONFIG_ETRAX_V32_LED2R); - ret += crisv32_io_get_name(&crisv32_led3_green, CONFIG_ETRAX_V32_LED3G); - ret += crisv32_io_get_name(&crisv32_led3_red, CONFIG_ETRAX_V32_LED3R); - - crisv32_io_set_dir(&crisv32_led2_green, crisv32_io_dir_out); - crisv32_io_set_dir(&crisv32_led2_red, crisv32_io_dir_out); - crisv32_io_set_dir(&crisv32_led3_green, crisv32_io_dir_out); - crisv32_io_set_dir(&crisv32_led3_red, crisv32_io_dir_out); - - return ret; -} - -__initcall(crisv32_io_init); - -int crisv32_io_get(struct crisv32_iopin *iopin, - unsigned int port, unsigned int pin) -{ - if (port > NBR_OF_PORTS) - return -EINVAL; - if (port > crisv32_ioports[port].pin_count) - return -EINVAL; - - iopin->bit = 1 << pin; - iopin->port = &crisv32_ioports[port]; - - if (crisv32_pinmux_alloc(port, pin, pin, pinmux_gpio)) - return -EIO; - - return 0; -} - -int crisv32_io_get_name(struct crisv32_iopin *iopin, const char *name) -{ - int port; - int pin; - - if (toupper(*name) == 'P') - name++; - - if (toupper(*name) < 'A' || toupper(*name) > 'E') - return -EINVAL; - - port = toupper(*name) - 'A'; - name++; - pin = simple_strtoul(name, NULL, 10); - - if (pin < 0 || pin > crisv32_ioports[port].pin_count) - return -EINVAL; - - iopin->bit = 1 << pin; - iopin->port = &crisv32_ioports[port]; - - if (crisv32_pinmux_alloc(port, pin, pin, pinmux_gpio)) - return -EIO; - - return 0; -} - -#ifdef CONFIG_PCI -/* PCI I/O access stuff */ -struct cris_io_operations *cris_iops = NULL; -EXPORT_SYMBOL(cris_iops); -#endif - diff --git a/arch/cris/arch-v32/mach-fs/Makefile b/arch/cris/arch-v32/mach-fs/Makefile index 18a2271..0cc6eeb 100644 --- a/arch/cris/arch-v32/mach-fs/Makefile +++ b/arch/cris/arch-v32/mach-fs/Makefile @@ -2,7 +2,7 @@ # Makefile for the linux kernel. # -obj-y := dma.o pinmux.o io.o arbiter.o +obj-y := dma.o pinmux.o arbiter.o clean: diff --git a/arch/cris/arch-v32/mach-fs/io.c b/arch/cris/arch-v32/mach-fs/io.c deleted file mode 100644 index a695866..0000000 --- a/arch/cris/arch-v32/mach-fs/io.c +++ /dev/null @@ -1,191 +0,0 @@ -/* - * Helper functions for I/O pins. - * - * Copyright (c) 2004-2007 Axis Communications AB. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#ifndef DEBUG -#define DEBUG(x) -#endif - -struct crisv32_ioport crisv32_ioports[] = { - { - (unsigned long *)REG_ADDR(gio, regi_gio, rw_pa_oe), - (unsigned long *)REG_ADDR(gio, regi_gio, rw_pa_dout), - (unsigned long *)REG_ADDR(gio, regi_gio, r_pa_din), - 8 - }, - { - (unsigned long *)REG_ADDR(gio, regi_gio, rw_pb_oe), - (unsigned long *)REG_ADDR(gio, regi_gio, rw_pb_dout), - (unsigned long *)REG_ADDR(gio, regi_gio, r_pb_din), - 18 - }, - { - (unsigned long *)REG_ADDR(gio, regi_gio, rw_pc_oe), - (unsigned long *)REG_ADDR(gio, regi_gio, rw_pc_dout), - (unsigned long *)REG_ADDR(gio, regi_gio, r_pc_din), - 18 - }, - { - (unsigned long *)REG_ADDR(gio, regi_gio, rw_pd_oe), - (unsigned long *)REG_ADDR(gio, regi_gio, rw_pd_dout), - (unsigned long *)REG_ADDR(gio, regi_gio, r_pd_din), - 18 - }, - { - (unsigned long *)REG_ADDR(gio, regi_gio, rw_pe_oe), - (unsigned long *)REG_ADDR(gio, regi_gio, rw_pe_dout), - (unsigned long *)REG_ADDR(gio, regi_gio, r_pe_din), - 18 - } -}; - -#define NBR_OF_PORTS ARRAY_SIZE(crisv32_ioports) - -struct crisv32_iopin crisv32_led_net0_green; -struct crisv32_iopin crisv32_led_net0_red; -struct crisv32_iopin crisv32_led_net1_green; -struct crisv32_iopin crisv32_led_net1_red; -struct crisv32_iopin crisv32_led2_green; -struct crisv32_iopin crisv32_led2_red; -struct crisv32_iopin crisv32_led3_green; -struct crisv32_iopin crisv32_led3_red; - -/* Dummy port used when green LED and red LED is on the same bit */ -static unsigned long io_dummy; -static struct crisv32_ioport dummy_port = { - &io_dummy, - &io_dummy, - &io_dummy, - 18 -}; -static struct crisv32_iopin dummy_led = { - &dummy_port, - 0 -}; - -static int __init crisv32_io_init(void) -{ - int ret = 0; - - u32 i; - - /* Locks *should* be dynamically initialized. */ - for (i = 0; i < ARRAY_SIZE(crisv32_ioports); i++) - spin_lock_init(&crisv32_ioports[i].lock); - spin_lock_init(&dummy_port.lock); - - /* Initialize LEDs */ -#if (defined(CONFIG_ETRAX_NBR_LED_GRP_ONE) || defined(CONFIG_ETRAX_NBR_LED_GRP_TWO)) - ret += - crisv32_io_get_name(&crisv32_led_net0_green, - CONFIG_ETRAX_LED_G_NET0); - crisv32_io_set_dir(&crisv32_led_net0_green, crisv32_io_dir_out); - if (strcmp(CONFIG_ETRAX_LED_G_NET0, CONFIG_ETRAX_LED_R_NET0)) { - ret += - crisv32_io_get_name(&crisv32_led_net0_red, - CONFIG_ETRAX_LED_R_NET0); - crisv32_io_set_dir(&crisv32_led_net0_red, crisv32_io_dir_out); - } else - crisv32_led_net0_red = dummy_led; -#endif - -#ifdef CONFIG_ETRAX_NBR_LED_GRP_TWO - ret += - crisv32_io_get_name(&crisv32_led_net1_green, - CONFIG_ETRAX_LED_G_NET1); - crisv32_io_set_dir(&crisv32_led_net1_green, crisv32_io_dir_out); - if (strcmp(CONFIG_ETRAX_LED_G_NET1, CONFIG_ETRAX_LED_R_NET1)) { - crisv32_io_get_name(&crisv32_led_net1_red, - CONFIG_ETRAX_LED_R_NET1); - crisv32_io_set_dir(&crisv32_led_net1_red, crisv32_io_dir_out); - } else - crisv32_led_net1_red = dummy_led; -#endif - - ret += crisv32_io_get_name(&crisv32_led2_green, CONFIG_ETRAX_V32_LED2G); - ret += crisv32_io_get_name(&crisv32_led2_red, CONFIG_ETRAX_V32_LED2R); - ret += crisv32_io_get_name(&crisv32_led3_green, CONFIG_ETRAX_V32_LED3G); - ret += crisv32_io_get_name(&crisv32_led3_red, CONFIG_ETRAX_V32_LED3R); - - crisv32_io_set_dir(&crisv32_led2_green, crisv32_io_dir_out); - crisv32_io_set_dir(&crisv32_led2_red, crisv32_io_dir_out); - crisv32_io_set_dir(&crisv32_led3_green, crisv32_io_dir_out); - crisv32_io_set_dir(&crisv32_led3_red, crisv32_io_dir_out); - - return ret; -} - -__initcall(crisv32_io_init); - -int crisv32_io_get(struct crisv32_iopin *iopin, - unsigned int port, unsigned int pin) -{ - if (port > NBR_OF_PORTS) - return -EINVAL; - if (port > crisv32_ioports[port].pin_count) - return -EINVAL; - - iopin->bit = 1 << pin; - iopin->port = &crisv32_ioports[port]; - - /* Only allocate pinmux gpiopins if port != PORT_A (port 0) */ - /* NOTE! crisv32_pinmux_alloc thinks PORT_B is port 0 */ - if (port != 0 && crisv32_pinmux_alloc(port - 1, pin, pin, pinmux_gpio)) - return -EIO; - DEBUG(printk(KERN_DEBUG "crisv32_io_get: Allocated pin %d on port %d\n", - pin, port)); - - return 0; -} - -int crisv32_io_get_name(struct crisv32_iopin *iopin, const char *name) -{ - int port; - int pin; - - if (toupper(*name) == 'P') - name++; - - if (toupper(*name) < 'A' || toupper(*name) > 'E') - return -EINVAL; - - port = toupper(*name) - 'A'; - name++; - pin = simple_strtoul(name, NULL, 10); - - if (pin < 0 || pin > crisv32_ioports[port].pin_count) - return -EINVAL; - - iopin->bit = 1 << pin; - iopin->port = &crisv32_ioports[port]; - - /* Only allocate pinmux gpiopins if port != PORT_A (port 0) */ - /* NOTE! crisv32_pinmux_alloc thinks PORT_B is port 0 */ - if (port != 0 && crisv32_pinmux_alloc(port - 1, pin, pin, pinmux_gpio)) - return -EIO; - - DEBUG(printk(KERN_DEBUG - "crisv32_io_get_name: Allocated pin %d on port %d\n", - pin, port)); - - return 0; -} - -#ifdef CONFIG_PCI -/* PCI I/O access stuff */ -struct cris_io_operations *cris_iops = NULL; -EXPORT_SYMBOL(cris_iops); -#endif diff --git a/arch/cris/include/arch-v32/arch/io.h b/arch/cris/include/arch-v32/arch/io.h deleted file mode 100644 index adc5484..0000000 --- a/arch/cris/include/arch-v32/arch/io.h +++ /dev/null @@ -1,140 +0,0 @@ -#ifndef _ASM_ARCH_CRIS_IO_H -#define _ASM_ARCH_CRIS_IO_H - -#include -#include -#include -#include - -enum crisv32_io_dir -{ - crisv32_io_dir_in = 0, - crisv32_io_dir_out = 1 -}; - -struct crisv32_ioport -{ - volatile unsigned long *oe; - volatile unsigned long *data; - volatile unsigned long *data_in; - unsigned int pin_count; - spinlock_t lock; -}; - -struct crisv32_iopin -{ - struct crisv32_ioport* port; - int bit; -}; - -extern struct crisv32_ioport crisv32_ioports[]; - -extern struct crisv32_iopin crisv32_led1_green; -extern struct crisv32_iopin crisv32_led1_red; -extern struct crisv32_iopin crisv32_led2_green; -extern struct crisv32_iopin crisv32_led2_red; -extern struct crisv32_iopin crisv32_led3_green; -extern struct crisv32_iopin crisv32_led3_red; - -extern struct crisv32_iopin crisv32_led_net0_green; -extern struct crisv32_iopin crisv32_led_net0_red; -extern struct crisv32_iopin crisv32_led_net1_green; -extern struct crisv32_iopin crisv32_led_net1_red; - -static inline void crisv32_io_set(struct crisv32_iopin *iopin, int val) -{ - unsigned long flags; - spin_lock_irqsave(&iopin->port->lock, flags); - - if (iopin->port->data) { - if (val) - *iopin->port->data |= iopin->bit; - else - *iopin->port->data &= ~iopin->bit; - } - - spin_unlock_irqrestore(&iopin->port->lock, flags); -} - -static inline void crisv32_io_set_dir(struct crisv32_iopin* iopin, - enum crisv32_io_dir dir) -{ - unsigned long flags; - spin_lock_irqsave(&iopin->port->lock, flags); - - if (iopin->port->oe) { - if (dir == crisv32_io_dir_in) - *iopin->port->oe &= ~iopin->bit; - else - *iopin->port->oe |= iopin->bit; - } - - spin_unlock_irqrestore(&iopin->port->lock, flags); -} - -static inline int crisv32_io_rd(struct crisv32_iopin* iopin) -{ - return ((*iopin->port->data_in & iopin->bit) ? 1 : 0); -} - -int crisv32_io_get(struct crisv32_iopin* iopin, - unsigned int port, unsigned int pin); -int crisv32_io_get_name(struct crisv32_iopin* iopin, - const char *name); - -#define CRIS_LED_OFF 0x00 -#define CRIS_LED_GREEN 0x01 -#define CRIS_LED_RED 0x02 -#define CRIS_LED_ORANGE (CRIS_LED_GREEN | CRIS_LED_RED) - -#if (defined(CONFIG_ETRAX_NBR_LED_GRP_ONE) || defined(CONFIG_ETRAX_NBR_LED_GRP_TWO)) -#define CRIS_LED_NETWORK_GRP0_SET(x) \ - do { \ - CRIS_LED_NETWORK_GRP0_SET_G((x) & CRIS_LED_GREEN); \ - CRIS_LED_NETWORK_GRP0_SET_R((x) & CRIS_LED_RED); \ - } while (0) -#else -#define CRIS_LED_NETWORK_GRP0_SET(x) while (0) {} -#endif - -#define CRIS_LED_NETWORK_GRP0_SET_G(x) \ - crisv32_io_set(&crisv32_led_net0_green, !(x)); - -#define CRIS_LED_NETWORK_GRP0_SET_R(x) \ - crisv32_io_set(&crisv32_led_net0_red, !(x)); - -#if defined(CONFIG_ETRAX_NBR_LED_GRP_TWO) -#define CRIS_LED_NETWORK_GRP1_SET(x) \ - do { \ - CRIS_LED_NETWORK_GRP1_SET_G((x) & CRIS_LED_GREEN); \ - CRIS_LED_NETWORK_GRP1_SET_R((x) & CRIS_LED_RED); \ - } while (0) -#else -#define CRIS_LED_NETWORK_GRP1_SET(x) while (0) {} -#endif - -#define CRIS_LED_NETWORK_GRP1_SET_G(x) \ - crisv32_io_set(&crisv32_led_net1_green, !(x)); - -#define CRIS_LED_NETWORK_GRP1_SET_R(x) \ - crisv32_io_set(&crisv32_led_net1_red, !(x)); - -#define CRIS_LED_ACTIVE_SET(x) \ - do { \ - CRIS_LED_ACTIVE_SET_G((x) & CRIS_LED_GREEN); \ - CRIS_LED_ACTIVE_SET_R((x) & CRIS_LED_RED); \ - } while (0) - -#define CRIS_LED_ACTIVE_SET_G(x) \ - crisv32_io_set(&crisv32_led2_green, !(x)); -#define CRIS_LED_ACTIVE_SET_R(x) \ - crisv32_io_set(&crisv32_led2_red, !(x)); -#define CRIS_LED_DISK_WRITE(x) \ - do{\ - crisv32_io_set(&crisv32_led3_green, !(x)); \ - crisv32_io_set(&crisv32_led3_red, !(x)); \ - }while(0) -#define CRIS_LED_DISK_READ(x) \ - crisv32_io_set(&crisv32_led3_green, !(x)); - -#endif diff --git a/arch/cris/include/asm/io.h b/arch/cris/include/asm/io.h index 752a3f4..cce8664 100644 --- a/arch/cris/include/asm/io.h +++ b/arch/cris/include/asm/io.h @@ -2,7 +2,9 @@ #define _ASM_CRIS_IO_H #include /* for __va, __pa */ +#ifdef CONFIG_ETRAX_ARCH_V10 #include +#endif #include #include -- 2.1.4 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/