Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753162AbbHESyD (ORCPT ); Wed, 5 Aug 2015 14:54:03 -0400 Received: from mail-pa0-f44.google.com ([209.85.220.44]:33966 "EHLO mail-pa0-f44.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752670AbbHESyA (ORCPT ); Wed, 5 Aug 2015 14:54:00 -0400 Date: Wed, 5 Aug 2015 11:53:57 -0700 From: Dmitry Torokhov To: linux-input@vger.kernel.org Cc: Rob Herring , Mark Rutland , Benson Leung , Duson Lin , Scott Liu , James Chen , devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-input@vger.kernel.org Subject: [PATCH] Input: elants_i2c - wire up regulator support Message-ID: <20150805185357.GA31387@dtor-ws> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.5.21 (2010-09-15) Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 8437 Lines: 291 Elan touchscreen controllers use two power supplies, vcc33 and vccio, and we need to enable them before trying to access the device. On X86 firmware usually does this, but on ARM it is usually left to the kernel. Signed-off-by: Dmitry Torokhov Reviewed-by: Benson Leung Signed-off-by: Dmitry Torokhov --- .../devicetree/bindings/input/elants_i2c.txt | 3 + drivers/input/touchscreen/elants_i2c.c | 184 ++++++++++++++++++--- 2 files changed, 165 insertions(+), 22 deletions(-) diff --git a/Documentation/devicetree/bindings/input/elants_i2c.txt b/Documentation/devicetree/bindings/input/elants_i2c.txt index a765232..8a71038 100644 --- a/Documentation/devicetree/bindings/input/elants_i2c.txt +++ b/Documentation/devicetree/bindings/input/elants_i2c.txt @@ -13,6 +13,9 @@ Optional properties: - pinctrl-names: should be "default" (see pinctrl binding [1]). - pinctrl-0: a phandle pointing to the pin settings for the device (see pinctrl binding [1]). +- reset-gpios: reset gpio the chip is connected to. +- vcc33-supply: a phandle for the regulator supplying 3.3V power. +- vccio-supply: a phandle for the regulator supplying IO power. [0]: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt [1]: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt diff --git a/drivers/input/touchscreen/elants_i2c.c b/drivers/input/touchscreen/elants_i2c.c index 42e43f1..1912265 100644 --- a/drivers/input/touchscreen/elants_i2c.c +++ b/drivers/input/touchscreen/elants_i2c.c @@ -38,6 +38,8 @@ #include #include #include +#include +#include #include /* Device, Driver information */ @@ -102,6 +104,9 @@ /* calibration timeout definition */ #define ELAN_CALI_TIMEOUT_MSEC 10000 +#define ELAN_POWERON_DELAY_USEC 500 +#define ELAN_RESET_DELAY_MSEC 20 + enum elants_state { ELAN_STATE_NORMAL, ELAN_WAIT_QUEUE_HEADER, @@ -118,6 +123,10 @@ struct elants_data { struct i2c_client *client; struct input_dev *input; + struct regulator *vcc33; + struct regulator *vccio; + struct gpio_desc *reset_gpio; + u16 fw_version; u8 test_version; u8 solution_version; @@ -141,6 +150,7 @@ struct elants_data { u8 buf[MAX_PACKET_SIZE]; bool wake_irq_enabled; + bool keep_power_in_suspend; }; static int elants_i2c_send(struct i2c_client *client, @@ -1058,6 +1068,67 @@ static void elants_i2c_remove_sysfs_group(void *_data) sysfs_remove_group(&ts->client->dev.kobj, &elants_attribute_group); } +static int elants_i2c_power_on(struct elants_data *ts) +{ + int error; + + /* + * If we do not have reset gpio assume platform firmware + * controls regulators and does power them on for us. + */ + if (IS_ERR_OR_NULL(ts->reset_gpio)) + return 0; + + gpiod_set_value_cansleep(ts->reset_gpio, 1); + + error = regulator_enable(ts->vcc33); + if (error) { + dev_err(&ts->client->dev, + "failed to enable vcc33 regulator: %d\n", + error); + goto release_reset_gpio; + } + + error = regulator_enable(ts->vccio); + if (error) { + dev_err(&ts->client->dev, + "failed to enable vccio regulator: %d\n", + error); + regulator_disable(ts->vcc33); + goto release_reset_gpio; + } + + /* + * We need to wait a bit after powering on controller before + * we are allowed to release reset GPIO. + */ + udelay(ELAN_POWERON_DELAY_USEC); + +release_reset_gpio: + gpiod_set_value_cansleep(ts->reset_gpio, 0); + if (error) + return error; + + msleep(ELAN_RESET_DELAY_MSEC); + + return 0; +} + +static void elants_i2c_power_off(void *_data) +{ + struct elants_data *ts = _data; + + if (!IS_ERR_OR_NULL(ts->reset_gpio)) { + /* + * Activate reset gpio to prevent leakage through the + * pin once we shut off power to the controller. + */ + gpiod_set_value_cansleep(ts->reset_gpio, 1); + regulator_disable(ts->vccio); + regulator_disable(ts->vcc33); + } +} + static int elants_i2c_probe(struct i2c_client *client, const struct i2c_device_id *id) { @@ -1072,13 +1143,6 @@ static int elants_i2c_probe(struct i2c_client *client, return -ENXIO; } - /* Make sure there is something at this address */ - if (i2c_smbus_xfer(client->adapter, client->addr, 0, - I2C_SMBUS_READ, 0, I2C_SMBUS_BYTE, &dummy) < 0) { - dev_err(&client->dev, "nothing at this address\n"); - return -ENXIO; - } - ts = devm_kzalloc(&client->dev, sizeof(struct elants_data), GFP_KERNEL); if (!ts) return -ENOMEM; @@ -1089,6 +1153,70 @@ static int elants_i2c_probe(struct i2c_client *client, ts->client = client; i2c_set_clientdata(client, ts); + ts->vcc33 = devm_regulator_get(&client->dev, "vcc33"); + if (IS_ERR(ts->vcc33)) { + error = PTR_ERR(ts->vcc33); + if (error != -EPROBE_DEFER) + dev_err(&client->dev, + "Failed to get 'vcc33' regulator: %d\n", + error); + return error; + } + + ts->vccio = devm_regulator_get(&client->dev, "vccio"); + if (IS_ERR(ts->vccio)) { + error = PTR_ERR(ts->vccio); + if (error != -EPROBE_DEFER) + dev_err(&client->dev, + "Failed to get 'vccio' regulator: %d\n", + error); + return error; + } + + ts->reset_gpio = devm_gpiod_get(&client->dev, "reset"); + if (IS_ERR(ts->reset_gpio)) { + error = PTR_ERR(ts->reset_gpio); + + if (error == -EPROBE_DEFER) + return error; + + if (error != -ENOENT && error != -ENOSYS) { + dev_err(&client->dev, + "failed to get reset gpio: %d\n", + error); + return error; + } + + ts->keep_power_in_suspend = true; + } else { + error = gpiod_direction_output(ts->reset_gpio, 0); + if (error) { + dev_err(&client->dev, + "failed to configure reset gpio as output: %d\n", + error); + return error; + } + } + + error = elants_i2c_power_on(ts); + if (error) + return error; + + error = devm_add_action(&client->dev, elants_i2c_power_off, ts); + if (error) { + dev_err(&client->dev, + "failed to install power off action: %d\n", error); + elants_i2c_power_off(ts); + return error; + } + + /* Make sure there is something at this address */ + if (i2c_smbus_xfer(client->adapter, client->addr, 0, + I2C_SMBUS_READ, 0, I2C_SMBUS_BYTE, &dummy) < 0) { + dev_err(&client->dev, "nothing at this address\n"); + return -ENXIO; + } + error = elants_i2c_initialize(ts); if (error) { dev_err(&client->dev, "failed to initialize: %d\n", error); @@ -1196,17 +1324,23 @@ static int __maybe_unused elants_i2c_suspend(struct device *dev) disable_irq(client->irq); - for (retry_cnt = 0; retry_cnt < MAX_RETRIES; retry_cnt++) { - error = elants_i2c_send(client, set_sleep_cmd, - sizeof(set_sleep_cmd)); - if (!error) - break; + if (device_may_wakeup(dev) || ts->keep_power_in_suspend) { + for (retry_cnt = 0; retry_cnt < MAX_RETRIES; retry_cnt++) { + error = elants_i2c_send(client, set_sleep_cmd, + sizeof(set_sleep_cmd)); + if (!error) + break; - dev_err(&client->dev, "suspend command failed: %d\n", error); - } + dev_err(&client->dev, + "suspend command failed: %d\n", error); + } - if (device_may_wakeup(dev)) - ts->wake_irq_enabled = (enable_irq_wake(client->irq) == 0); + if (device_may_wakeup(dev)) + ts->wake_irq_enabled = + (enable_irq_wake(client->irq) == 0); + } else { + elants_i2c_power_off(ts); + } return 0; } @@ -1222,13 +1356,19 @@ static int __maybe_unused elants_i2c_resume(struct device *dev) if (device_may_wakeup(dev) && ts->wake_irq_enabled) disable_irq_wake(client->irq); - for (retry_cnt = 0; retry_cnt < MAX_RETRIES; retry_cnt++) { - error = elants_i2c_send(client, set_active_cmd, - sizeof(set_active_cmd)); - if (!error) - break; + if (ts->keep_power_in_suspend) { + for (retry_cnt = 0; retry_cnt < MAX_RETRIES; retry_cnt++) { + error = elants_i2c_send(client, set_active_cmd, + sizeof(set_active_cmd)); + if (!error) + break; - dev_err(&client->dev, "resume command failed: %d\n", error); + dev_err(&client->dev, + "resume command failed: %d\n", error); + } + } else { + elants_i2c_power_on(ts); + elants_i2c_initialize(ts); } ts->state = ELAN_STATE_NORMAL; -- 2.5.0.rc2.392.g76e840b -- Dmitry -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/