Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id ; Mon, 17 Feb 2003 09:10:43 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id ; Mon, 17 Feb 2003 09:09:52 -0500 Received: from chii.cinet.co.jp ([61.197.228.217]:28800 "EHLO yuzuki.cinet.co.jp") by vger.kernel.org with ESMTP id ; Mon, 17 Feb 2003 09:08:14 -0500 Date: Mon, 17 Feb 2003 23:16:46 +0900 From: Osamu Tomita To: Linux Kernel Mailing List Cc: Alan Cox Subject: [PATCHSET] PC-9800 subarch. support for 2.5.61 (17/26) parport Message-ID: <20030217141646.GQ4799@yuzuki.cinet.co.jp> References: <20030217134333.GA4734@yuzuki.cinet.co.jp> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <20030217134333.GA4734@yuzuki.cinet.co.jp> User-Agent: Mutt/1.4i Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 5210 Lines: 176 This is patchset to support NEC PC-9800 subarchitecture against 2.5.61 (17/26). Parallel port support. diff -Nru linux/drivers/parport/parport_pc.c linux98/drivers/parport/parport_pc.c --- linux/drivers/parport/parport_pc.c 2002-12-16 11:08:22.000000000 +0900 +++ linux98/drivers/parport/parport_pc.c 2002-12-22 20:51:23.000000000 +0900 @@ -332,7 +332,10 @@ unsigned char parport_pc_read_status(struct parport *p) { - return inb (STATUS (p)); + if (pc98 && p->base == 0x40) + return ((inb(0x42) & 0x04) << 5) | PARPORT_STATUS_ERROR; + else + return inb (STATUS (p)); } void parport_pc_disable_irq(struct parport *p) @@ -1644,6 +1647,8 @@ { unsigned char r, w; + if (pc98 && pb->base == 0x40) + return PARPORT_MODE_PCSPP; /* * first clear an eventually pending EPP timeout * I (sailer@ife.ee.ethz.ch) have an SMSC chipset @@ -1777,6 +1782,9 @@ { int ok = 0; + if (pc98 && pb->base == 0x40) + return 0; /* never support */ + clear_epp_timeout(pb); /* try to tri-state the buffer */ @@ -1908,6 +1916,9 @@ config & 0x80 ? "Level" : "Pulses"); configb = inb (CONFIGB (pb)); + if (pc98 && (CONFIGB(pb) == 0x14d) && ((configb & 0x38) == 0x30)) + configb = (configb & ~0x38) | 0x28; /* IRQ 14 */ + printk (KERN_DEBUG "0x%lx: ECP port cfgA=0x%02x cfgB=0x%02x\n", pb->base, config, configb); printk (KERN_DEBUG "0x%lx: ECP settings irq=", pb->base); @@ -2048,6 +2059,9 @@ ECR_WRITE (pb, ECR_CNF << 5); /* Configuration MODE */ intrLine = (inb (CONFIGB (pb)) >> 3) & 0x07; + if (pc98 && (CONFIGB(pb) == 0x14d) && (intrLine == 6)) + intrLine = 5; /* IRQ 14 */ + irq = lookup[intrLine]; ECR_WRITE (pb, oecr); @@ -2212,7 +2226,14 @@ struct parport tmp; struct parport *p = &tmp; int probedirq = PARPORT_IRQ_NONE; - if (check_region(base, 3)) return NULL; + if (pc98 && base == 0x40) { + int i; + for (i = 0; i < 8; i += 2) + if (check_region(base + i, 1)) return NULL; + } else { + if (check_region(base, 3)) return NULL; + } + priv = kmalloc (sizeof (struct parport_pc_private), GFP_KERNEL); if (!priv) { printk (KERN_DEBUG "parport (0x%lx): no memory!\n", base); @@ -2245,7 +2266,7 @@ if (base_hi && !check_region(base_hi,3)) parport_ECR_present(p); - if (base != 0x3bc) { + if (!pc98 && base != 0x3bc) { if (!check_region(base+0x3, 5)) { if (!parport_EPP_supported(p)) parport_ECPEPP_supported(p); @@ -2343,7 +2364,12 @@ printk(KERN_INFO "%s: irq %d detected\n", p->name, probedirq); parport_proc_register(p); - request_region (p->base, 3, p->name); + if (pc98 && p->base == 0x40) { + int i; + for (i = 0; i < 8; i += 2) + request_region(p->base + i, 1, p->name); + } else + request_region (p->base, 3, p->name); if (p->size > 3) request_region (p->base + 3, p->size - 3, p->name); if (p->modes & PARPORT_MODE_ECP) @@ -2413,7 +2439,13 @@ free_dma(p->dma); if (p->irq != PARPORT_IRQ_NONE) free_irq(p->irq, p); - release_region(p->base, 3); + if (pc98 && p->base == 0x40) { + int i; + for (i = 0; i < 8; i += 2) + release_region(p->base + i, 1); + } else + release_region(p->base, 3); + if (p->size > 3) release_region(p->base + 3, p->size - 3); if (p->modes & PARPORT_MODE_ECP) @@ -2996,6 +3028,30 @@ { int count = 0; + if (pc98) { + /* Set default resource settings for old style parport */ + int base = 0x40; + int base_hi = 0; + int irq = PARPORT_IRQ_NONE; + int dma = PARPORT_DMA_NONE; + + /* Check PC9800 old style parport */ + outb(inb(0x149) & ~0x10, 0x149); /* disable IEEE1284 */ + if (!(inb(0x149) & 0x10)) { /* IEEE1284 disabled ? */ + outb(inb(0x149) | 0x10, 0x149); /* enable IEEE1284 */ + if (inb(0x149) & 0x10) { /* IEEE1284 enabled ? */ + /* Set default settings for IEEE1284 parport */ + base = 0x140; + base_hi = 0x14c; + irq = 14; + /* dma = PARPORT_DMA_NONE; */ + } + } + + if (parport_pc_probe_port(base, base_hi, irq, dma, NULL)) + count++; + } + if (parport_pc_probe_port(0x3bc, 0x7bc, autoirq, autodma, NULL)) count++; if (parport_pc_probe_port(0x378, 0x778, autoirq, autodma, NULL)) diff -Nru linux/include/linux/parport_pc.h linux98/include/linux/parport_pc.h --- linux/include/linux/parport_pc.h 2002-06-12 11:15:27.000000000 +0900 +++ linux98/include/linux/parport_pc.h 2002-08-19 14:13:09.000000000 +0900 @@ -119,6 +119,11 @@ #endif ctr = (ctr & ~mask) ^ val; ctr &= priv->ctr_writable; /* only write writable bits. */ +#ifdef CONFIG_X86_PC9800 + if (p->base == 0x40 && ((priv->ctr) ^ ctr) & 0x01) + outb(0x0e | ((ctr & 0x01) ^ 0x01), 0x46); + else +#endif /* CONFIG_X86_PC9800 */ outb (ctr, CONTROL (p)); priv->ctr = ctr; /* Update soft copy */ return ctr; @@ -191,6 +196,11 @@ extern __inline__ unsigned char parport_pc_read_status(struct parport *p) { +#ifdef CONFIG_X86_PC9800 + if (p->base == 0x40) + return ((inb(0x42) & 0x04) << 5) | PARPORT_STATUS_ERROR; + else +#endif /* CONFIG_X86_PC9800 */ return inb(STATUS(p)); } - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/