Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754351AbbHGDAd (ORCPT ); Thu, 6 Aug 2015 23:00:33 -0400 Received: from mga14.intel.com ([192.55.52.115]:59068 "EHLO mga14.intel.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752993AbbHGDAM (ORCPT ); Thu, 6 Aug 2015 23:00:12 -0400 X-ExtLoop1: 1 X-IronPort-AV: E=Sophos;i="5.15,626,1432623600"; d="scan'208";a="743852139" From: kan.liang@intel.com To: acme@kernel.org, jolsa@kernel.org Cc: namhyung@kernel.org, ak@linux.intel.com, linux-kernel@vger.kernel.org, Kan Liang Subject: [PATCH RFC V9 2/3] perf,tools: per-event callgraph support Date: Thu, 6 Aug 2015 15:44:53 -0400 Message-Id: <1438890294-33409-2-git-send-email-kan.liang@intel.com> X-Mailer: git-send-email 1.8.3.1 In-Reply-To: <1438890294-33409-1-git-send-email-kan.liang@intel.com> References: <1438890294-33409-1-git-send-email-kan.liang@intel.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 12543 Lines: 376 From: Kan Liang When multiple events are sampled it may not be needed to collect callgraphs for all of them. The sample sites are usually nearby, and it's enough to collect the callgraphs on a reference event (such as precise cycles or precise instructions). This patchkit adds the ability to turn off callgraphs and time stamp per event. This in term can reduce sampling overhead and the size of the perf.data. Furthermore, it makes collecting back traces and timestamps possible when PEBS threshold > 1, which significantly reducing the sampling overhead especially for frequently occurring events (https://lkml.org/lkml/2015/5/10/196). For example, A slower event with a larger period collects back traces/timestamps. Other more events run fast with multi-pebs. The time stamps from the slower events can be used to order the faster events. Their backtraces can give the user enough hint to find the right spot. Here are some examples and test results. 1. Comparing the elapsed time and perf.data size from "kernbench -M -H". The test command for FULL callgraph and time support. "perf record -e '{cpu/cpu-cycles,period=100000/,cpu/instructions,period=20000/p}' --call-graph fp --time" The test command for PARTIAL callgraph and time support. "perf record -e '{cpu/cpu-cycles,call-graph=fp,time,period=100000/, cpu/instructions,call-graph=no,time=0,period=20000/p}'" The elapsed time for FULL is 24.3 Sec, while for PARTIAL is 16.9 Sec. The perf.data size for FULL is 22.1 Gb, while for PARTIAL is 12.4 Gb. 2. Comparing the perf.data size and callgraph results. The test command for FULL callgraph and time support. "perf record -e '{cpu/cpu-cycles,period=100000/pp,cpu/instructions,period=20000/p}' --call-graph fp -- ./tchain_edit" The test command for PARTIAL callgraph and time support. "perf record -e '{cpu/cpu-cycles,call-graph=fp,time,period=100000/pp, cpu/instructions,call-graph=no,time=0,period=20000/p}' -- ./tchain_edit" The perf.data size for FULL is 43.2 MB, while for PARTIAL is 21.1 MB. The callgraph is roughly the same. The callgraph from FULL # Samples: 87K of event 'cpu/cpu-cycles,call-graph=fp,time,period=100000/pp' # Event count (approx.): 8760000000 # # Children Self Command Shared Object Symbol # ........ ........ ........... .................. .......................................... # 99.98% 0.00% tchain_edit libc-2.15.so [.] __libc_start_main | ---__libc_start_main 99.97% 0.00% tchain_edit tchain_edit [.] main | ---main __libc_start_main 99.97% 0.00% tchain_edit tchain_edit [.] f1 | ---f1 main __libc_start_main 99.85% 87.01% tchain_edit tchain_edit [.] f3 | ---f3 | |--99.74%-- f2 | f1 | main | __libc_start_main --0.26%-- [...] 99.71% 0.12% tchain_edit tchain_edit [.] f2 | ---f2 f1 main __libc_start_main The callgraph from PARTIAL # Samples: 417K of event 'cpu/instructions,call-graph=no,time=0,period=20000/p' # Event count (approx.): 8346980000 # # Children Self Command Shared Object Symbol # ........ ........ ........... ................ .......................................... # 98.82% 0.00% tchain_edit libc-2.15.so [.] __libc_start_main | ---__libc_start_main 98.82% 0.00% tchain_edit tchain_edit [.] main | ---main __libc_start_main 98.82% 0.00% tchain_edit tchain_edit [.] f1 | ---f1 main __libc_start_main 98.82% 98.28% tchain_edit tchain_edit [.] f3 | ---f3 | |--0.53%-- f2 | f1 | main | __libc_start_main | |--0.01%-- f1 | main | __libc_start_main --99.46%-- [...] 97.63% 0.03% tchain_edit tchain_edit [.] f2 | ---f2 f1 main __libc_start_main 7.13% 0.03% tchain_edit [kernel.vmlinux] [k] do_nmi | ---do_nmi end_repeat_nmi f3 f2 f1 main __libc_start_main Signed-off-by: Kan Liang --- Changes since V8: - Same as global dump_size caculation, round_up dump_size for per-event dump_size. tools/perf/Documentation/perf-record.txt | 4 ++ tools/perf/util/evsel.c | 67 +++++++++++++++++++++++++++++++- tools/perf/util/evsel.h | 4 ++ tools/perf/util/parse-events.c | 12 ++++++ tools/perf/util/parse-events.h | 2 + tools/perf/util/parse-events.l | 2 + tools/perf/util/pmu.c | 3 +- 7 files changed, 91 insertions(+), 3 deletions(-) diff --git a/tools/perf/Documentation/perf-record.txt b/tools/perf/Documentation/perf-record.txt index 0d852d1..e633711 100644 --- a/tools/perf/Documentation/perf-record.txt +++ b/tools/perf/Documentation/perf-record.txt @@ -52,6 +52,10 @@ OPTIONS - 'time': Disable/enable time stamping. Acceptable values are 1 for enabling time stamping. 0 for disabling time stamping. The default is 1. + - 'call-graph': Disable/enable callgraph. Acceptable str are "fp" for + FP mode, "dwarf" for DWARF mode, "lbr" for LBR mode and + "no" for disable callgraph. + - 'stack-size': user stack size for dwarf mode Note: If user explicitly sets options which conflict with the params, the value set by the params will be overridden. diff --git a/tools/perf/util/evsel.c b/tools/perf/util/evsel.c index f572f46..d902cad 100644 --- a/tools/perf/util/evsel.c +++ b/tools/perf/util/evsel.c @@ -588,11 +588,36 @@ perf_evsel__config_callgraph(struct perf_evsel *evsel, } } -static void apply_config_terms(struct perf_evsel *evsel) +static void +perf_evsel__reset_callgraph(struct perf_evsel *evsel, + struct callchain_param *param) +{ + struct perf_event_attr *attr = &evsel->attr; + + perf_evsel__reset_sample_bit(evsel, CALLCHAIN); + if (param->record_mode == CALLCHAIN_LBR) { + perf_evsel__reset_sample_bit(evsel, BRANCH_STACK); + attr->branch_sample_type &= ~(PERF_SAMPLE_BRANCH_USER | + PERF_SAMPLE_BRANCH_CALL_STACK); + } + if (param->record_mode == CALLCHAIN_DWARF) { + perf_evsel__reset_sample_bit(evsel, REGS_USER); + perf_evsel__reset_sample_bit(evsel, STACK_USER); + } +} + +static void apply_config_terms(struct perf_evsel *evsel, + struct record_opts *opts) { struct perf_evsel_config_term *term; struct list_head *config_terms = &evsel->config_terms; struct perf_event_attr *attr = &evsel->attr; + struct callchain_param param; + u32 dump_size = 0; + char *callgraph_buf = NULL; + + /* callgraph default */ + param.record_mode = callchain_param.record_mode; list_for_each_entry(term, config_terms, list) { switch (term->type) { @@ -605,10 +630,48 @@ static void apply_config_terms(struct perf_evsel *evsel) else perf_evsel__reset_sample_bit(evsel, TIME); break; + case PERF_EVSEL__CONFIG_TERM_CALLGRAPH: + callgraph_buf = term->val.callgraph; + break; + case PERF_EVSEL__CONFIG_TERM_STACK_USER: + dump_size = term->val.stack_user; + break; default: break; } } + + /* User explicitly set per-event callgraph, clear the old setting and reset. */ + if ((callgraph_buf != NULL) || (dump_size > 0)) { + + /* parse callgraph parameters */ + if (callgraph_buf != NULL) { + if (!strcmp(callgraph_buf, "no")) { + param.enabled = false; + param.record_mode = CALLCHAIN_NONE; + } else { + param.enabled = true; + if (parse_callchain_record(callgraph_buf, ¶m)) { + pr_err("per-event callgraph setting for %s failed. " + "Apply callgraph global setting for it\n", + evsel->name); + return; + } + } + } + if (dump_size > 0) { + dump_size = round_up(dump_size, sizeof(u64)); + param.dump_size = dump_size; + } + + /* If global callgraph set, clear it */ + if (callchain_param.enabled) + perf_evsel__reset_callgraph(evsel, &callchain_param); + + /* set perf-event callgraph */ + if (param.enabled) + perf_evsel__config_callgraph(evsel, opts, ¶m); + } } /* @@ -807,7 +870,7 @@ void perf_evsel__config(struct perf_evsel *evsel, struct record_opts *opts) * Apply event specific term settings, * it overloads any global configuration. */ - apply_config_terms(evsel); + apply_config_terms(evsel, opts); } static int perf_evsel__alloc_fd(struct perf_evsel *evsel, int ncpus, int nthreads) diff --git a/tools/perf/util/evsel.h b/tools/perf/util/evsel.h index 6a12908..09a3022 100644 --- a/tools/perf/util/evsel.h +++ b/tools/perf/util/evsel.h @@ -40,6 +40,8 @@ struct cgroup_sel; enum { PERF_EVSEL__CONFIG_TERM_PERIOD, PERF_EVSEL__CONFIG_TERM_TIME, + PERF_EVSEL__CONFIG_TERM_CALLGRAPH, + PERF_EVSEL__CONFIG_TERM_STACK_USER, PERF_EVSEL__CONFIG_TERM_MAX, }; @@ -49,6 +51,8 @@ struct perf_evsel_config_term { union { u64 period; bool time; + char *callgraph; + u64 stack_user; } val; }; diff --git a/tools/perf/util/parse-events.c b/tools/perf/util/parse-events.c index 828936d..773fe8b 100644 --- a/tools/perf/util/parse-events.c +++ b/tools/perf/util/parse-events.c @@ -611,6 +611,12 @@ do { \ return -EINVAL; } break; + case PARSE_EVENTS__TERM_TYPE_CALLGRAPH: + CHECK_TYPE_VAL(STR); + break; + case PARSE_EVENTS__TERM_TYPE_STACKSIZE: + CHECK_TYPE_VAL(NUM); + break; case PARSE_EVENTS__TERM_TYPE_NAME: CHECK_TYPE_VAL(STR); break; @@ -662,6 +668,12 @@ do { \ case PARSE_EVENTS__TERM_TYPE_TIME: ADD_CONFIG_TERM(TIME, time, term->val.num); break; + case PARSE_EVENTS__TERM_TYPE_CALLGRAPH: + ADD_CONFIG_TERM(CALLGRAPH, callgraph, term->val.str); + break; + case PARSE_EVENTS__TERM_TYPE_STACKSIZE: + ADD_CONFIG_TERM(STACK_USER, stack_user, term->val.num); + break; default: break; } diff --git a/tools/perf/util/parse-events.h b/tools/perf/util/parse-events.h index e6f9aacc..87dc9f6 100644 --- a/tools/perf/util/parse-events.h +++ b/tools/perf/util/parse-events.h @@ -64,6 +64,8 @@ enum { PARSE_EVENTS__TERM_TYPE_SAMPLE_PERIOD, PARSE_EVENTS__TERM_TYPE_BRANCH_SAMPLE_TYPE, PARSE_EVENTS__TERM_TYPE_TIME, + PARSE_EVENTS__TERM_TYPE_CALLGRAPH, + PARSE_EVENTS__TERM_TYPE_STACKSIZE, }; struct parse_events_term { diff --git a/tools/perf/util/parse-events.l b/tools/perf/util/parse-events.l index f542750..1665497 100644 --- a/tools/perf/util/parse-events.l +++ b/tools/perf/util/parse-events.l @@ -184,6 +184,8 @@ name { return term(yyscanner, PARSE_EVENTS__TERM_TYPE_NAME); } period { return term(yyscanner, PARSE_EVENTS__TERM_TYPE_SAMPLE_PERIOD); } branch_type { return term(yyscanner, PARSE_EVENTS__TERM_TYPE_BRANCH_SAMPLE_TYPE); } time { return term(yyscanner, PARSE_EVENTS__TERM_TYPE_TIME); } +call-graph { return term(yyscanner, PARSE_EVENTS__TERM_TYPE_CALLGRAPH); } +stack-size { return term(yyscanner, PARSE_EVENTS__TERM_TYPE_STACKSIZE); } , { return ','; } "/" { BEGIN(INITIAL); return '/'; } {name_minus} { return str(yyscanner, PE_NAME); } diff --git a/tools/perf/util/pmu.c b/tools/perf/util/pmu.c index d4b0e64..239a653 100644 --- a/tools/perf/util/pmu.c +++ b/tools/perf/util/pmu.c @@ -634,7 +634,8 @@ static char *formats_error_string(struct list_head *formats) { struct perf_pmu_format *format; char *err, *str; - static const char *static_terms = "config,config1,config2,name,period,branch_type,time\n"; + static const char *static_terms = "config,config1,config2,name,period," + "branch_type,time,call-graph,stack-size\n"; unsigned i = 0; if (!asprintf(&str, "valid terms:")) -- 1.8.3.1 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/