Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S933234AbbHITDA (ORCPT ); Sun, 9 Aug 2015 15:03:00 -0400 Received: from 7of9.schinagl.nl ([88.159.158.68]:35928 "EHLO 7of9.schinagl.nl" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S933155AbbHITC4 (ORCPT ); Sun, 9 Aug 2015 15:02:56 -0400 From: Olliver Schinagl To: Maxime Ripard Cc: Olliver Schinagl , dev@linux-sunxi.org, Rob Herring , Pawel Moll , Mark Rutland , Ian Campbell , Kumar Gala , Russell King , devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, Olliver Schinagl , Olliver Schinagl Subject: [PATCH] ARM: dts: sunxi: enable otg port on the sun7i-a20-olinuxino-lime2 Date: Sun, 9 Aug 2015 21:02:48 +0200 Message-Id: <1439146968-9039-2-git-send-email-oliver@schinagl.nl> X-Mailer: git-send-email 2.1.4 In-Reply-To: <1439146968-9039-1-git-send-email-oliver@schinagl.nl> References: <1439146968-9039-1-git-send-email-oliver@schinagl.nl> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 4822 Lines: 208 From: Olliver Schinagl This patch enables the musb-otg USB controller on the Lime2. The Lime2 differs from the Lime1 series in pins used for usb0 power. Tested on a OlinuXino Lime2-4GB. Signed-off-by: Olliver Schinagl --- arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts | 131 ++++++++++++++---------- 1 file changed, 75 insertions(+), 56 deletions(-) diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts index 22cd052..efd9ebb 100644 --- a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts +++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts @@ -71,14 +71,6 @@ default-state = "on"; }; }; - - reg_axp_ipsout: axp_ipsout { - compatible = "regulator-fixed"; - regulator-name = "axp-ipsout"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - }; }; &ahci { @@ -86,6 +78,10 @@ status = "okay"; }; +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + &ehci0 { status = "okay"; }; @@ -112,57 +108,9 @@ status = "okay"; axp209: pmic@34 { - compatible = "x-powers,axp209"; reg = <0x34>; interrupt-parent = <&nmi_intc>; interrupts = <0 IRQ_TYPE_LEVEL_LOW>; - - interrupt-controller; - #interrupt-cells = <1>; - - acin-supply = <®_axp_ipsout>; - vin2-supply = <®_axp_ipsout>; - vin3-supply = <®_axp_ipsout>; - ldo24in-supply = <®_axp_ipsout>; - ldo3in-supply = <®_axp_ipsout>; - - regulators { - vdd_rtc: ldo1 { - regulator-min-microvolt = <1300000>; - regulator-max-microvolt = <1300000>; - regulator-always-on; - }; - - avcc: ldo2 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - vcc_csi0: ldo3 { - regulator-min-microvolt = <700000>; - regulator-max-microvolt = <3500000>; - regulator-always-on; - }; - - vcc_csi1: ldo4 { - regulator-min-microvolt = <1250000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - vdd_cpu: dcdc2 { - regulator-min-microvolt = <700000>; - regulator-max-microvolt = <2275000>; - regulator-always-on; - }; - - vdd_int: dcdc3 { - regulator-min-microvolt = <700000>; - regulator-max-microvolt = <3500000>; - regulator-always-on; - }; - }; }; }; @@ -196,6 +144,10 @@ status = "okay"; }; +&otg_sram { + status = "okay"; +}; + &pio { ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 { allwinner,pins = "PC3"; @@ -210,6 +162,27 @@ allwinner,drive = ; allwinner,pull = ; }; + + usb0_id_detect_pin: usb0_id_detect_pin@0 { + allwinner,pins = "PH4"; + allwinner,function = "gpio_in"; + allwinner,drive = ; + allwinner,pull = ; + }; + + usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { + allwinner,pins = "PH5"; + allwinner,function = "gpio_in"; + allwinner,drive = ; + allwinner,pull = ; + }; + + usb0_vbus_pin_lime2: usb0_vbus_pin@0 { + allwinner,pins = "PC17"; + allwinner,function = "gpio_out"; + allwinner,drive = ; + allwinner,pull = ; + }; }; ®_ahci_5v { @@ -218,6 +191,42 @@ status = "okay"; }; +#include "axp209.dtsi" + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1450000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-int-dll"; +}; + +®_ldo1 { + regulator-always-on; + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + regulator-name = "vdd-rtc"; +}; + +®_ldo2 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "avcc"; +}; + +®_usb0_vbus { + pinctrl-0 = <&usb0_vbus_pin_lime2>; + gpio = <&pio 2 17 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + ®_usb1_vbus { status = "okay"; }; @@ -232,7 +241,17 @@ status = "okay"; }; +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + &usbphy { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; + usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ + usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */ + usb0_vbus-supply = <®_usb0_vbus>; usb1_vbus-supply = <®_usb1_vbus>; usb2_vbus-supply = <®_usb2_vbus>; status = "okay"; -- 2.1.4 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/