Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753899AbbHJOPC (ORCPT ); Mon, 10 Aug 2015 10:15:02 -0400 Received: from mail-wi0-f171.google.com ([209.85.212.171]:37253 "EHLO mail-wi0-f171.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753640AbbHJOOz (ORCPT ); Mon, 10 Aug 2015 10:14:55 -0400 From: Sanchayan Maity To: gregkh@linuxfoundation.org, srinivas.kandagatla@linaro.org, maxime.ripard@free-electrons.com Cc: linux-arm-kernel@lists.infradead.org, stefan@agner.ch, shawnguo@kernel.org, kernel@pengutronix.de, stefan.wahren@i2se.com, linux-kernel@vger.kernel.org, p.zabel@pengutronix.de, Sanchayan Maity Subject: [PATCH v8 3/4] drivers: nvmem: Add Vybrid OCOTP support Date: Mon, 10 Aug 2015 19:41:31 +0530 Message-Id: <29b527f1897b24a310a3f3acee61c721d3399503.1439214648.git.maitysanchayan@gmail.com> X-Mailer: git-send-email 2.5.0 In-Reply-To: References: In-Reply-To: References: Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 9711 Lines: 355 The patch adds support for the On Chip One Time Programmable Peripheral (OCOTP) on the Vybrid platform. Signed-off-by: Sanchayan Maity --- drivers/nvmem/Kconfig | 10 ++ drivers/nvmem/Makefile | 2 + drivers/nvmem/vf610-ocotp.c | 301 ++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 313 insertions(+) create mode 100644 drivers/nvmem/vf610-ocotp.c diff --git a/drivers/nvmem/Kconfig b/drivers/nvmem/Kconfig index 0b33014..7af4c1d 100644 --- a/drivers/nvmem/Kconfig +++ b/drivers/nvmem/Kconfig @@ -47,4 +47,14 @@ config NVMEM_IMX_OCOTP This driver can also be built as a module. If so, the module will be called nvmem-imx-ocotp. +config NVMEM_VF610_OCOTP + tristate "VF610_SoCs OCOTP support" + depends on SOC_VF610 || COMPILE_TEST + help + This is a driver for the 'OCOTP' peripheral available on Vybrid + devices like VF5xx and VF6xx. + + This driver can also be built as a module. If so, the module will + be called nvmem-vf610-ocotp. + endif diff --git a/drivers/nvmem/Makefile b/drivers/nvmem/Makefile index b512d77..8a1eea8 100644 --- a/drivers/nvmem/Makefile +++ b/drivers/nvmem/Makefile @@ -12,3 +12,5 @@ obj-$(CONFIG_NVMEM_SUNXI_SID) += nvmem_sunxi_sid.o nvmem_sunxi_sid-y := sunxi_sid.o obj-$(CONFIG_NVMEM_IMX_OCOTP) += nvmem-imx-ocotp.o nvmem-imx-ocotp-y := imx-ocotp.o +obj-$(CONFIG_NVMEM_VF610_OCOTP) += nvmem-vf610-ocotp.o +nvmem-vf610-ocotp-y := vf610-ocotp.o diff --git a/drivers/nvmem/vf610-ocotp.c b/drivers/nvmem/vf610-ocotp.c new file mode 100644 index 0000000..9e18156 --- /dev/null +++ b/drivers/nvmem/vf610-ocotp.c @@ -0,0 +1,301 @@ +/* + * Copyright (C) 2015 Toradex AG. + * + * Author: Sanchayan Maity + * + * Based on the barebox ocotp driver, + * Copyright (c) 2010 Baruch Siach + * Orex Computed Radiography + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* OCOTP Register Offsets */ +#define OCOTP_CTRL_REG 0x00 +#define OCOTP_CTRL_SET 0x04 +#define OCOTP_CTRL_CLR 0x08 +#define OCOTP_TIMING 0x10 +#define OCOTP_DATA 0x20 +#define OCOTP_READ_CTRL_REG 0x30 +#define OCOTP_READ_FUSE_DATA 0x40 + +/* OCOTP Register bits and masks */ +#define OCOTP_CTRL_WR_UNLOCK 16 +#define OCOTP_CTRL_WR_UNLOCK_KEY 0x3E77 +#define OCOTP_CTRL_WR_UNLOCK_MASK GENMASK(31, 16) +#define OCOTP_CTRL_ADDR 0 +#define OCOTP_CTRL_ADDR_MASK GENMASK(6, 0) +#define OCOTP_CTRL_RELOAD_SHADOWS BIT(10) +#define OCOTP_CTRL_ERROR BIT(9) +#define OCOTP_CTRL_BUSY BIT(8) + +#define OCOTP_TIMING_STROBE_READ 16 +#define OCOTP_TIMING_STROBE_READ_MASK GENMASK(21, 16) +#define OCOTP_TIMING_RELAX 12 +#define OCOTP_TIMING_RELAX_MASK GENMASK(15, 12) +#define OCOTP_TIMING_STROBE_PROG 0 +#define OCOTP_TIMING_STROBE_PROG_MASK GENMASK(11, 0) + +#define OCOTP_READ_CTRL_READ_FUSE 0x1 + +#define VF610_OCOTP_TIMEOUT 100000 + +#define BF(value, field) (((value) << field) & field##_MASK) + +#define DEF_RELAX 20 + +static const int base_to_fuse_addr_mappings[][2] = { + {0x400, 0x00}, + {0x410, 0x01}, + {0x420, 0x02}, + {0x450, 0x05}, + {0x4F0, 0x0F}, + {0x600, 0x20}, + {0x610, 0x21}, + {0x620, 0x22}, + {0x630, 0x23}, + {0x640, 0x24}, + {0x650, 0x25}, + {0x660, 0x26}, + {0x670, 0x27}, + {0x6F0, 0x2F}, + {0x880, 0x38}, + {0x890, 0x39}, + {0x8A0, 0x3A}, + {0x8B0, 0x3B}, + {0x8C0, 0x3C}, + {0x8D0, 0x3D}, + {0x8E0, 0x3E}, + {0x8F0, 0x3F}, + {0xC80, 0x78}, + {0xC90, 0x79}, + {0xCA0, 0x7A}, + {0xCB0, 0x7B}, + {0xCC0, 0x7C}, + {0xCD0, 0x7D}, + {0xCE0, 0x7E}, + {0xCF0, 0x7F}, +}; + +struct vf610_ocotp { + void __iomem *base; + struct clk *clk; + struct device *dev; + struct nvmem_device *nvmem; + int timing; +}; + +static int vf610_ocotp_wait_busy(void __iomem *base) +{ + int timeout = VF610_OCOTP_TIMEOUT; + + while ((readl(base) & OCOTP_CTRL_BUSY) && --timeout) + udelay(10); + + if (!timeout) { + writel(OCOTP_CTRL_ERROR, base + OCOTP_CTRL_CLR); + return -ETIMEDOUT; + } + + udelay(10); + + return 0; +} + +static int vf610_ocotp_calculate_timing(struct vf610_ocotp *ocotp_dev) +{ + u32 clk_rate; + u32 relax, strobe_read, strobe_prog; + u32 timing; + + clk_rate = clk_get_rate(ocotp_dev->clk); + + /* Refer section OTP read/write timing parameters in TRM */ + relax = clk_rate / (1000000000 / DEF_RELAX) - 1; + strobe_prog = clk_rate / (1000000000 / 10000) + 2 * (DEF_RELAX + 1) - 1; + strobe_read = clk_rate / (1000000000 / 40) + 2 * (DEF_RELAX + 1) - 1; + + timing = BF(relax, OCOTP_TIMING_RELAX); + timing |= BF(strobe_read, OCOTP_TIMING_STROBE_READ); + timing |= BF(strobe_prog, OCOTP_TIMING_STROBE_PROG); + + return timing; +} + +static int vf610_get_fuse_address(int base_addr_offset) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(base_to_fuse_addr_mappings); i++) { + if (base_to_fuse_addr_mappings[i][0] == base_addr_offset) + return base_to_fuse_addr_mappings[i][1]; + } + + return -EINVAL; +} + +static int vf610_ocotp_write(void *context, const void *data, size_t count) +{ + return 0; +} + +static int vf610_ocotp_read(void *context, + const void *off, size_t reg_size, + void *val, size_t val_size) +{ + struct vf610_ocotp *ocotp = context; + unsigned int offset = *(u32 *)off; + u32 reg, *buf = val; + int fuse_addr; + int ret; + + while (val_size > 0) { + fuse_addr = vf610_get_fuse_address(offset); + if (fuse_addr > 0) { + writel(ocotp->timing, ocotp->base + OCOTP_TIMING); + ret = vf610_ocotp_wait_busy(ocotp->base + OCOTP_CTRL_REG); + if (ret) + return ret; + + reg = readl(ocotp->base + OCOTP_CTRL_REG); + reg &= ~OCOTP_CTRL_ADDR_MASK; + reg &= ~OCOTP_CTRL_WR_UNLOCK_MASK; + reg |= BF(fuse_addr, OCOTP_CTRL_ADDR); + writel(reg, ocotp->base + OCOTP_CTRL_REG); + + writel(OCOTP_READ_CTRL_READ_FUSE, + ocotp->base + OCOTP_READ_CTRL_REG); + ret = vf610_ocotp_wait_busy(ocotp->base + OCOTP_CTRL_REG); + if (ret) + return ret; + + if (readl(ocotp->base) & OCOTP_CTRL_ERROR) { + dev_dbg(ocotp->dev, "Error reading from fuse address %x\n", + fuse_addr); + writel(OCOTP_CTRL_ERROR, ocotp->base + OCOTP_CTRL_CLR); + } + + /* + * In case of error, we do not abort and expect to read + * 0xBADABADA as mentioned by the TRM. We just read this + * value and return. + */ + *buf = readl(ocotp->base + OCOTP_READ_FUSE_DATA); + } else { + *buf = 0; + } + + buf++; + val_size--; + offset += reg_size; + } + + return 0; +} + +static struct regmap_bus vf610_ocotp_bus = { + .read = vf610_ocotp_read, + .write = vf610_ocotp_write, + .reg_format_endian_default = REGMAP_ENDIAN_NATIVE, + .val_format_endian_default = REGMAP_ENDIAN_NATIVE, +}; + +static struct regmap_config ocotp_regmap_config = { + .reg_bits = 32, + .val_bits = 32, + .reg_stride = 4, +}; + +static struct nvmem_config ocotp_config = { + .name = "ocotp", + .owner = THIS_MODULE, +}; + +static const struct of_device_id ocotp_of_match[] = { + { .compatible = "fsl,vf610-ocotp", }, + {/* sentinel */}, +}; +MODULE_DEVICE_TABLE(of, ocotp_of_match); + +static int vf610_ocotp_remove(struct platform_device *pdev) +{ + struct vf610_ocotp *ocotp_dev = platform_get_drvdata(pdev); + + return nvmem_unregister(ocotp_dev->nvmem); +} + +static int vf610_ocotp_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct resource *res; + struct regmap *regmap; + struct vf610_ocotp *ocotp_dev; + + ocotp_dev = devm_kzalloc(&pdev->dev, + sizeof(struct vf610_ocotp), GFP_KERNEL); + if (!ocotp_dev) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + ocotp_dev->base = devm_ioremap_resource(dev, res); + if (IS_ERR(ocotp_dev->base)) + return PTR_ERR(ocotp_dev->base); + + ocotp_dev->clk = devm_clk_get(dev, "ocotp"); + if (IS_ERR(ocotp_dev->clk)) { + dev_err(dev, "failed getting clock, err = %ld\n", + PTR_ERR(ocotp_dev->clk)); + return PTR_ERR(ocotp_dev->clk); + } + + ocotp_regmap_config.max_register = resource_size(res); + regmap = devm_regmap_init(dev, + &vf610_ocotp_bus, ocotp_dev, &ocotp_regmap_config); + if (IS_ERR(regmap)) { + dev_err(dev, "regmap init failed\n"); + return PTR_ERR(regmap); + } + ocotp_config.dev = dev; + + ocotp_dev->nvmem = nvmem_register(&ocotp_config); + if (IS_ERR(ocotp_dev->nvmem)) + return PTR_ERR(ocotp_dev->nvmem); + + ocotp_dev->dev = dev; + platform_set_drvdata(pdev, ocotp_dev); + + ocotp_dev->timing = vf610_ocotp_calculate_timing(ocotp_dev); + + return 0; +} + +static struct platform_driver vf610_ocotp_driver = { + .probe = vf610_ocotp_probe, + .remove = vf610_ocotp_remove, + .driver = { + .name = "vf610-ocotp", + .of_match_table = ocotp_of_match, + }, +}; +module_platform_driver(vf610_ocotp_driver); +MODULE_AUTHOR("Sanchayan Maity "); +MODULE_DESCRIPTION("Vybrid OCOTP driver"); +MODULE_LICENSE("GPL v2"); -- 2.5.0 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/