Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S933599AbbHKCnP (ORCPT ); Mon, 10 Aug 2015 22:43:15 -0400 Received: from mx0a-0016f401.pphosted.com ([67.231.148.174]:15521 "EHLO mx0a-0016f401.pphosted.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S933181AbbHKCnM (ORCPT ); Mon, 10 Aug 2015 22:43:12 -0400 Date: Tue, 11 Aug 2015 10:39:02 +0800 From: Jisheng Zhang To: CC: , , , , , , , , , , Subject: Re: [PATCH] arm64: dts: Add base stratix 10 dtsi Message-ID: <20150811103902.38cbcb6d@xhacker> In-Reply-To: <1439240958-4713-1-git-send-email-dinguyen@opensource.altera.com> References: <1439240958-4713-1-git-send-email-dinguyen@opensource.altera.com> X-Mailer: Claws Mail 3.11.1 (GTK+ 2.24.28; x86_64-pc-linux-gnu) MIME-Version: 1.0 Content-Type: text/plain; charset="US-ASCII" Content-Transfer-Encoding: 7bit X-Proofpoint-Virus-Version: vendor=fsecure engine=2.50.10432:,, definitions=2015-08-11_01:,, signatures=0 X-Proofpoint-Spam-Details: rule=inbound_notspam policy=inbound score=0 kscore.is_bulkscore=0 kscore.compositescore=1 compositescore=0.9 suspectscore=1 malwarescore=0 phishscore=0 bulkscore=0 kscore.is_spamscore=0 rbsscore=0.9 spamscore=0 urlsuspectscore=0.9 adultscore=0 classifier=spam adjust=0 reason=mlx scancount=1 engine=8.0.1-1506180000 definitions=main-1508110041 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 12487 Lines: 450 On Mon, 10 Aug 2015 16:09:18 -0500 wrote: > From: Dinh Nguyen > > Add the base DTS for Altera's SoCFPGA Stratix 10 platform. > > Signed-off-by: Dinh Nguyen > --- > arch/arm64/Kconfig | 5 + > arch/arm64/boot/dts/Makefile | 1 + > arch/arm64/boot/dts/altera/Makefile | 5 + > arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi | 354 +++++++++++++++++++++ > .../boot/dts/altera/socfpga_stratix10_socdk.dts | 38 +++ > arch/arm64/configs/defconfig | 1 + > 6 files changed, 404 insertions(+) > create mode 100644 arch/arm64/boot/dts/altera/Makefile > create mode 100644 arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi > create mode 100644 arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts > > diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig > index 318175f..0f8ab2b 100644 > --- a/arch/arm64/Kconfig > +++ b/arch/arm64/Kconfig > @@ -207,6 +207,11 @@ config ARCH_SEATTLE > help > This enables support for AMD Seattle SOC Family > > +config ARCH_STRATIX10 > + bool "Altera's Stratix 10 SoCFPGA Family" > + help > + This enables support for Altera's Stratix 10 SoCFPGA Family > + > config ARCH_TEGRA > bool "NVIDIA Tegra SoC Family" > select ARCH_HAS_RESET_CONTROLLER > diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile > index 38913be..7fb421a 100644 > --- a/arch/arm64/boot/dts/Makefile > +++ b/arch/arm64/boot/dts/Makefile > @@ -1,3 +1,4 @@ > +dts-dirs += altera > dts-dirs += amd > dts-dirs += apm > dts-dirs += arm > diff --git a/arch/arm64/boot/dts/altera/Makefile b/arch/arm64/boot/dts/altera/Makefile > new file mode 100644 > index 0000000..d7a6416 > --- /dev/null > +++ b/arch/arm64/boot/dts/altera/Makefile > @@ -0,0 +1,5 @@ > +dtb-$(CONFIG_ARCH_STRATIX10) += socfpga_stratix10_socdk.dtb > + > +always := $(dtb-y) > +subdir-y := $(dts-dirs) > +clean-files := *.dtb > diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi > new file mode 100644 > index 0000000..34f6dc3 > --- /dev/null > +++ b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi > @@ -0,0 +1,354 @@ > +/* > + * Copyright Altera Corporation (C) 2015. All rights reserved. > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms and conditions of the GNU General Public License, > + * version 2, as published by the Free Software Foundation. > + * > + * This program is distributed in the hope it will be useful, but WITHOUT > + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or > + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for > + * more details. > + * > + * You should have received a copy of the GNU General Public License along with > + * this program. If not, see . > + */ > + > +/dts-v1/; > + > +/ { > + compatible = "altr,socfpga-stratix10"; > + #address-cells = <1>; > + #size-cells = <1>; > + [...] > + > + pmu { > + compatible = "arm,armv8-pmuv3"; > + interrupts = <0 120 8>, > + <0 121 8>, > + <0 122 8>, > + <0 123 8>; it's better to add interrupt-affinity according to Sudeep's suggestions. > + }; > + > + psci { > + compatible = "arm,psci-0.2"; > + method = "smc"; > + }; > + > + intc: intc@ffff8000 { > + compatible = "arm,gic-400", "arm,cortex-a15-gic"; > + #interrupt-cells = <3>; > + interrupt-controller; > + reg = <0x0 0xffff9000 0x1000>, > + <0x0 0xffffa000 0x2000>, > + <0x0 0xffffc000 0x1000>, > + <0x0 0xffffd000 0x1000>; > + }; > + > + soc { > + #address-cells = <1>; > + #size-cells = <1>; > + compatible = "simple-bus"; > + device_type = "soc"; > + interrupt-parent = <&intc>; > + ranges; > + > + clkmgr@ffd1000 { > + compatible = "altr,clk-mgr"; > + reg = <0xffd10000 0x1000>; > + }; > + > + gmac0: ethernet@ff800000 { > + compatible = "altr,socfpga-stmmac", "snps,dwmac-3.74a", "snps,dwmac"; > + reg = <0xff800000 0x2000>; > + interrupts = <0 90 4>; > + interrupt-names = "macirq"; > + mac-address = [00 00 00 00 00 00]; > + status = "disabled"; > + }; > + > + gmac1: ethernet@ff802000 { > + compatible = "altr,socfpga-stmmac", "snps,dwmac-3.74a", "snps,dwmac"; > + reg = <0xff802000 0x2000>; > + interrupts = <0 91 4>; > + interrupt-names = "macirq"; > + mac-address = [00 00 00 00 00 00]; > + status = "disabled"; > + }; > + > + gmac2: ethernet@ff804000 { > + compatible = "altr,socfpga-stmmac", "snps,dwmac-3.74a", "snps,dwmac"; > + reg = <0xff804000 0x2000>; > + interrupts = <0 92 4>; > + interrupt-names = "macirq"; > + mac-address = [00 00 00 00 00 00]; > + status = "disabled"; > + }; > + > + gpio0: gpio@ffc03200 { > + #address-cells = <1>; > + #size-cells = <0>; > + compatible = "snps,dw-apb-gpio"; > + reg = <0xffc03200 0x100>; > + status = "disabled"; > + > + porta: gpio-controller@0 { > + compatible = "snps,dw-apb-gpio-port"; > + gpio-controller; > + #gpio-cells = <2>; > + snps,nr-gpios = <24>; > + reg = <0>; > + interrupt-controller; > + #interrupt-cells = <2>; > + interrupts = <0 110 4>; > + }; > + }; > + > + gpio1: gpio@ffc03300 { > + #address-cells = <1>; > + #size-cells = <0>; > + compatible = "snps,dw-apb-gpio"; > + reg = <0xffc03300 0x100>; > + status = "disabled"; > + > + portb: gpio-controller@0 { > + compatible = "snps,dw-apb-gpio-port"; > + gpio-controller; > + #gpio-cells = <2>; > + snps,nr-gpios = <24>; > + reg = <0>; > + interrupt-controller; > + #interrupt-cells = <2>; > + interrupts = <0 110 4>; > + }; > + }; > + > + i2c0: i2c@ffc02800 { > + #address-cells = <1>; > + #size-cells = <0>; > + compatible = "snps,designware-i2c"; > + reg = <0xffc02800 0x100>; > + interrupts = <0 103 4>; > + status = "disabled"; > + }; > + > + i2c1: i2c@ffc02900 { > + #address-cells = <1>; > + #size-cells = <0>; > + compatible = "snps,designware-i2c"; > + reg = <0xffc02900 0x100>; > + interrupts = <0 104 4>; > + status = "disabled"; > + }; > + > + i2c2: i2c@ffc02a00 { > + #address-cells = <1>; > + #size-cells = <0>; > + compatible = "snps,designware-i2c"; > + reg = <0xffc02a00 0x100>; > + interrupts = <0 105 4>; > + status = "disabled"; > + }; > + > + i2c3: i2c@ffc02b00 { > + #address-cells = <1>; > + #size-cells = <0>; > + compatible = "snps,designware-i2c"; > + reg = <0xffc02b00 0x100>; > + interrupts = <0 106 4>; > + status = "disabled"; > + }; > + > + i2c4: i2c@ffc02c00 { > + #address-cells = <1>; > + #size-cells = <0>; > + compatible = "snps,designware-i2c"; > + reg = <0xffc02c00 0x100>; > + interrupts = <0 107 4>; > + status = "disabled"; > + }; > + > + mmc: dwmmc0@ff808000 { > + #address-cells = <1>; > + #size-cells = <0>; > + compatible = "altr,socfpga-dw-mshc"; > + reg = <0xff808000 0x1000>; > + interrupts = <0 96 4>; > + fifo-depth = <0x400>; > + status = "disabled"; > + }; > + > + ocram: sram@ffe00000 { > + compatible = "mmio-sram"; > + reg = <0xffe00000 0x100000>; > + }; > + > + rst: rstmgr@ffd11000 { > + #reset-cells = <1>; > + compatible = "altr,rst-mgr"; > + reg = <0xffd11000 0x1000>; > + }; > + > + spi0: spi@ffda4000 { > + compatible = "snps,dw-apb-ssi"; > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0xffda4000 0x1000>; > + interrupts = <0 101 4>; > + num-chipselect = <4>; > + bus-num = <0>; > + status = "disabled"; > + }; > + > + spi1: spi@ffda5000 { > + compatible = "snps,dw-apb-ssi"; > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0xffda5000 0x1000>; > + interrupts = <0 102 4>; > + num-chipselect = <4>; > + bus-num = <0>; > + status = "disabled"; > + }; > + > + sysmgr: sysmgr@ffd12000 { > + compatible = "altr,sys-mgr", "syscon"; > + reg = <0xffd12000 0x1000>; > + }; > + > + /* Local timer */ > + timer { > + compatible = "arm,armv8-timer"; > + interrupts = <1 13 0xf01>, > + <1 14 0xf01>, > + <1 11 0xf01>, > + <1 10 0xf01>; > + }; > + > + timer0: timer0@ffc03000 { > + compatible = "snps,dw-apb-timer"; > + interrupts = <0 113 4>; > + reg = <0xffc03000 0x100>; > + }; > + > + timer1: timer1@ffc03100 { > + compatible = "snps,dw-apb-timer"; > + interrupts = <0 114 4>; > + reg = <0xffc03100 0x100>; > + }; > + > + timer2: timer2@ffd00000 { > + compatible = "snps,dw-apb-timer"; > + interrupts = <0 115 4>; > + reg = <0xffd00000 0x100>; > + }; > + > + timer3: timer3@ffd00100 { > + compatible = "snps,dw-apb-timer"; > + interrupts = <0 116 4>; > + reg = <0xffd00100 0x100>; > + }; > + > + uart0: serial0@ffc02000 { > + compatible = "snps,dw-apb-uart"; > + reg = <0xffc02000 0x100>; > + interrupts = <0 108 4>; > + reg-shift = <2>; > + reg-io-width = <4>; > + status = "disabled"; > + }; > + > + uart1: serial1@ffc02100 { > + compatible = "snps,dw-apb-uart"; > + reg = <0xffc02100 0x100>; > + interrupts = <0 109 4>; > + reg-shift = <2>; > + reg-io-width = <4>; > + status = "disabled"; > + }; > + > + usbphy0: usbphy@0 { > + #phy-cells = <0>; > + compatible = "usb-nop-xceiv"; > + status = "okay"; > + }; > + > + usb0: usb@ffb00000 { > + compatible = "snps,dwc2"; > + reg = <0xffb00000 0x40000>; > + interrupts = <0 93 4>; > + phys = <&usbphy0>; > + phy-names = "usb2-phy"; > + status = "disabled"; > + }; > + > + usb1: usb@ffb40000 { > + compatible = "snps,dwc2"; > + reg = <0xffb40000 0x40000>; > + interrupts = <0 94 4>; > + phys = <&usbphy0>; > + phy-names = "usb2-phy"; > + status = "disabled"; > + }; > + > + watchdog0: watchdog@ffd00200 { > + compatible = "snps,dw-wdt"; > + reg = <0xffd00200 0x100>; > + interrupts = <0 117 4>; > + status = "disabled"; > + }; > + > + watchdog1: watchdog@ffd00300 { > + compatible = "snps,dw-wdt"; > + reg = <0xffd00300 0x100>; > + interrupts = <0 118 4>; > + status = "disabled"; > + }; > + > + watchdog2: watchdog@ffd00400 { > + compatible = "snps,dw-wdt"; > + reg = <0xffd00400 0x100>; > + interrupts = <0 125 4>; > + status = "disabled"; > + }; > + > + watchdog3: watchdog@ffd00500 { > + compatible = "snps,dw-wdt"; > + reg = <0xffd00500 0x100>; > + interrupts = <0 126 4>; > + status = "disabled"; > + }; > + }; > +}; > diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts > new file mode 100644 > index 0000000..8b162ef > --- /dev/null > +++ b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts > @@ -0,0 +1,38 @@ > +/* > + * Copyright Altera Corporation (C) 2015. All rights reserved. > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms and conditions of the GNU General Public License, > + * version 2, as published by the Free Software Foundation. > + * > + * This program is distributed in the hope it will be useful, but WITHOUT > + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or > + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for > + * more details. > + * > + * You should have received a copy of the GNU General Public License along with > + * this program. If not, see . > + */ > + > +/include/ "socfpga_stratix10.dtsi" > + > +/ { > + model = "SoCFPGA Stratix 10 SoCDK"; > + > + aliases { > + serial0 = &uart0; > + }; > + > + chosen { > + stdout-path = "serial0:115200n8"; > + }; > + > + memory { > + device_type = "memory"; > + reg = <0x0 0x40000000>; > + }; > +}; > + > +&uart0 { > + status = "okay"; > +}; > diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig > index 4e17e7e..ad3b636 100644 > --- a/arch/arm64/configs/defconfig > +++ b/arch/arm64/configs/defconfig > @@ -36,6 +36,7 @@ CONFIG_ARCH_FSL_LS2085A=y > CONFIG_ARCH_HISI=y > CONFIG_ARCH_MEDIATEK=y > CONFIG_ARCH_SEATTLE=y > +CONFIG_ARCH_STRATIX10=y > CONFIG_ARCH_TEGRA=y > CONFIG_ARCH_TEGRA_132_SOC=y > CONFIG_ARCH_QCOM=y -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/