Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752731AbbHKRdG (ORCPT ); Tue, 11 Aug 2015 13:33:06 -0400 Received: from mx0b-00082601.pphosted.com ([67.231.153.30]:35063 "EHLO mx0b-00082601.pphosted.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752382AbbHKRdC (ORCPT ); Tue, 11 Aug 2015 13:33:02 -0400 Message-ID: <55CA31AB.3030308@fb.com> Date: Tue, 11 Aug 2015 11:32:27 -0600 From: Jens Axboe User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:31.0) Gecko/20100101 Thunderbird/31.8.0 MIME-Version: 1.0 To: Rafal Mielniczuk , Bob Liu CC: Marcus Granado , Arianna Avanzini , Felipe Franciosi , "linux-kernel@vger.kernel.org" , Christoph Hellwig , David Vrabel , "xen-devel@lists.xenproject.org" , "boris.ostrovsky@oracle.com" , Jonathan Davies Subject: Re: [Xen-devel] [PATCH RFC v2 0/5] Multi-queue support for xen-blkfront and xen-blkback References: <1410479844-2864-1-git-send-email-avanzini.arianna@gmail.com> <20141001202721.GF12581@laptop.dumpdata.com> <20150428073646.GA16022@infradead.org> <553F3ADF.3000301@gmail.com> <555327A5.1060200@oracle.com> <5592A5EF.2050005@citrix.com> <55935848.7080909@fb.com> <55C8C8CE.7020301@fb.com> <55C99130.3020501@oracle.com> In-Reply-To: Content-Type: text/plain; charset="windows-1252"; format=flowed Content-Transfer-Encoding: 7bit X-Originating-IP: [192.168.54.13] X-Proofpoint-Spam-Reason: safe X-FB-Internal: Safe X-Proofpoint-Virus-Version: vendor=fsecure engine=2.50.10432:5.14.151,1.0.33,0.0.0000 definitions=2015-08-11_08:2015-08-11,2015-08-11,1970-01-01 signatures=0 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 7035 Lines: 140 On 08/11/2015 03:45 AM, Rafal Mielniczuk wrote: > On 11/08/15 07:08, Bob Liu wrote: >> On 08/10/2015 11:52 PM, Jens Axboe wrote: >>> On 08/10/2015 05:03 AM, Rafal Mielniczuk wrote: >>>> On 01/07/15 04:03, Jens Axboe wrote: >>>>> On 06/30/2015 08:21 AM, Marcus Granado wrote: >>>>>> Hi, >>>>>> >>>>>> Our measurements for the multiqueue patch indicate a clear improvement >>>>>> in iops when more queues are used. >>>>>> >>>>>> The measurements were obtained under the following conditions: >>>>>> >>>>>> - using blkback as the dom0 backend with the multiqueue patch applied to >>>>>> a dom0 kernel 4.0 on 8 vcpus. >>>>>> >>>>>> - using a recent Ubuntu 15.04 kernel 3.19 with multiqueue frontend >>>>>> applied to be used as a guest on 4 vcpus >>>>>> >>>>>> - using a micron RealSSD P320h as the underlying local storage on a Dell >>>>>> PowerEdge R720 with 2 Xeon E5-2643 v2 cpus. >>>>>> >>>>>> - fio 2.2.7-22-g36870 as the generator of synthetic loads in the guest. >>>>>> We used direct_io to skip caching in the guest and ran fio for 60s >>>>>> reading a number of block sizes ranging from 512 bytes to 4MiB. Queue >>>>>> depth of 32 for each queue was used to saturate individual vcpus in the >>>>>> guest. >>>>>> >>>>>> We were interested in observing storage iops for different values of >>>>>> block sizes. Our expectation was that iops would improve when increasing >>>>>> the number of queues, because both the guest and dom0 would be able to >>>>>> make use of more vcpus to handle these requests. >>>>>> >>>>>> These are the results (as aggregate iops for all the fio threads) that >>>>>> we got for the conditions above with sequential reads: >>>>>> >>>>>> fio_threads io_depth block_size 1-queue_iops 8-queue_iops >>>>>> 8 32 512 158K 264K >>>>>> 8 32 1K 157K 260K >>>>>> 8 32 2K 157K 258K >>>>>> 8 32 4K 148K 257K >>>>>> 8 32 8K 124K 207K >>>>>> 8 32 16K 84K 105K >>>>>> 8 32 32K 50K 54K >>>>>> 8 32 64K 24K 27K >>>>>> 8 32 128K 11K 13K >>>>>> >>>>>> 8-queue iops was better than single queue iops for all the block sizes. >>>>>> There were very good improvements as well for sequential writes with >>>>>> block size 4K (from 80K iops with single queue to 230K iops with 8 >>>>>> queues), and no regressions were visible in any measurement performed. >>>>> Great results! And I don't know why this code has lingered for so long, >>>>> so thanks for helping get some attention to this again. >>>>> >>>>> Personally I'd be really interested in the results for the same set of >>>>> tests, but without the blk-mq patches. Do you have them, or could you >>>>> potentially run them? >>>>> >>>> Hello, >>>> >>>> We rerun the tests for sequential reads with the identical settings but with Bob Liu's multiqueue patches reverted from dom0 and guest kernels. >>>> The results we obtained were *better* than the results we got with multiqueue patches applied: >>>> >>>> fio_threads io_depth block_size 1-queue_iops 8-queue_iops *no-mq-patches_iops* >>>> 8 32 512 158K 264K 321K >>>> 8 32 1K 157K 260K 328K >>>> 8 32 2K 157K 258K 336K >>>> 8 32 4K 148K 257K 308K >>>> 8 32 8K 124K 207K 188K >>>> 8 32 16K 84K 105K 82K >>>> 8 32 32K 50K 54K 36K >>>> 8 32 64K 24K 27K 16K >>>> 8 32 128K 11K 13K 11K >>>> >>>> We noticed that the requests are not merged by the guest when the multiqueue patches are applied, >>>> which results in a regression for small block sizes (RealSSD P320h's optimal block size is around 32-64KB). >>>> >>>> We observed similar regression for the Dell MZ-5EA1000-0D3 100 GB 2.5" Internal SSD >>>> >>>> As I understand blk-mq layer bypasses I/O scheduler which also effectively disables merges. >>>> Could you explain why it is difficult to enable merging in the blk-mq layer? >>>> That could help closing the performance gap we observed. >>>> >>>> Otherwise, the tests shows that the multiqueue patches does not improve the performance, >>>> at least when it comes to sequential read/writes operations. >>> blk-mq still provides merging, there should be no difference there. Does the xen patches set BLK_MQ_F_SHOULD_MERGE? >>> >> Yes. >> Is it possible that xen-blkfront driver dequeue requests too fast after we have multiple hardware queues? >> Because new requests don't have the chance merging with old requests which were already dequeued and issued. >> > > For some reason we don't see merges even when we set multiqueue to 1. > Below are some stats from the guest system when doing sequential 4KB reads: > > $ fio --name=test --ioengine=libaio --direct=1 --rw=read --numjobs=8 > --iodepth=32 --time_based=1 --runtime=300 --bs=4KB > --filename=/dev/xvdb > > $ iostat -xt 5 /dev/xvdb > avg-cpu: %user %nice %system %iowait %steal %idle > 0.50 0.00 2.73 85.14 2.00 9.63 > > Device: rrqm/s wrqm/s r/s w/s rkB/s wkB/s > avgrq-sz avgqu-sz await r_await w_await svctm %util > xvdb 0.00 0.00 156926.00 0.00 627704.00 0.00 > 8.00 30.06 0.19 0.19 0.00 0.01 100.48 > > $ cat /sys/block/xvdb/queue/scheduler > none > > $ cat /sys/block/xvdb/queue/nomerges > 0 > > Relevant bits from the xenstore configuration on the dom0: > > /local/domain/0/backend/vbd/2/51728/dev = "xvdb" > /local/domain/0/backend/vbd/2/51728/backend-kind = "vbd" > /local/domain/0/backend/vbd/2/51728/type = "phy" > /local/domain/0/backend/vbd/2/51728/multi-queue-max-queues = "1" > > /local/domain/2/device/vbd/51728/multi-queue-num-queues = "1" > /local/domain/2/device/vbd/51728/ring-ref = "9" > /local/domain/2/device/vbd/51728/event-channel = "60" If you add --iodepth-batch=16 to that fio command line? Both mq and non-mq relies on plugging to get batching in the use case above, otherwise IO is dispatched immediately. O_DIRECT is immediate. I'd be more interested in seeing a test case with buffered IO of a file system on top of the xvdb device, if we're missing merging for that case, then that's a much bigger issue. -- Jens Axboe -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/