Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S964864AbbHLKSb (ORCPT ); Wed, 12 Aug 2015 06:18:31 -0400 Received: from metis.ext.pengutronix.de ([92.198.50.35]:47743 "EHLO metis.ext.pengutronix.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754378AbbHLKNs (ORCPT ); Wed, 12 Aug 2015 06:13:48 -0400 From: Markus Pargmann To: Mark Brown , Jonathan Cameron Cc: Srinivas Pandruvada , linux-iio@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, kernel@pengutronix.de, Markus Pargmann Subject: [PATCH 17/20] iio: bmc150: Use i2c regmap Date: Wed, 12 Aug 2015 12:12:42 +0200 Message-Id: <1439374365-20623-18-git-send-email-mpa@pengutronix.de> X-Mailer: git-send-email 2.4.6 In-Reply-To: <1439374365-20623-1-git-send-email-mpa@pengutronix.de> References: <1439374365-20623-1-git-send-email-mpa@pengutronix.de> X-SA-Exim-Connect-IP: 2001:67c:670:100:1d::7 X-SA-Exim-Mail-From: mpa@pengutronix.de X-SA-Exim-Scanned: No (on metis.ext.pengutronix.de); SAEximRunCond expanded to false X-PTX-Original-Recipient: linux-kernel@vger.kernel.org Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 17060 Lines: 511 This replaces all usage of direct i2c accesses with regmap accesses. Signed-off-by: Markus Pargmann --- drivers/iio/accel/Kconfig | 2 + drivers/iio/accel/bmc150-accel.c | 225 +++++++++++++++++---------------------- 2 files changed, 101 insertions(+), 126 deletions(-) diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig index 00e7bcbdbe24..01dd03d194d1 100644 --- a/drivers/iio/accel/Kconfig +++ b/drivers/iio/accel/Kconfig @@ -22,6 +22,8 @@ config BMC150_ACCEL depends on I2C select IIO_BUFFER select IIO_TRIGGERED_BUFFER + select REGMAP + select REGMAP_I2C help Say yes here to build support for the following Bosch accelerometers: BMC150, BMI055, BMA250E, BMA222E, BMA255, BMA280. diff --git a/drivers/iio/accel/bmc150-accel.c b/drivers/iio/accel/bmc150-accel.c index fe2d2316158f..1484e956482e 100644 --- a/drivers/iio/accel/bmc150-accel.c +++ b/drivers/iio/accel/bmc150-accel.c @@ -35,6 +35,7 @@ #include #include #include +#include #define BMC150_ACCEL_DRV_NAME "bmc150_accel" #define BMC150_ACCEL_IRQ_NAME "bmc150_accel_event" @@ -185,6 +186,8 @@ enum bmc150_accel_trigger_id { struct bmc150_accel_data { struct i2c_client *client; + struct regmap *regmap; + struct device *dev; struct bmc150_accel_interrupt interrupts[BMC150_ACCEL_INTERRUPTS]; atomic_t active_intr; struct bmc150_accel_trigger triggers[BMC150_ACCEL_TRIGGERS]; @@ -241,6 +244,14 @@ static const struct { {500000, BMC150_ACCEL_SLEEP_500_MS}, {1000000, BMC150_ACCEL_SLEEP_1_SEC} }; +static const struct regmap_config bmc150_i2c_regmap_conf = { + .reg_bits = 8, + .val_bits = 8, + .max_register = 0x3f, + + .use_single_rw = false, + .cache_type = REGCACHE_NONE, +}; static int bmc150_accel_set_mode(struct bmc150_accel_data *data, enum bmc150_power_modes mode, @@ -270,8 +281,7 @@ static int bmc150_accel_set_mode(struct bmc150_accel_data *data, dev_dbg(&data->client->dev, "Set Mode bits %x\n", lpw_bits); - ret = i2c_smbus_write_byte_data(data->client, - BMC150_ACCEL_REG_PMU_LPW, lpw_bits); + ret = regmap_write(data->regmap, BMC150_ACCEL_REG_PMU_LPW, lpw_bits); if (ret < 0) { dev_err(&data->client->dev, "Error writing reg_pmu_lpw\n"); return ret; @@ -289,8 +299,7 @@ static int bmc150_accel_set_bw(struct bmc150_accel_data *data, int val, for (i = 0; i < ARRAY_SIZE(bmc150_accel_samp_freq_table); ++i) { if (bmc150_accel_samp_freq_table[i].val == val && bmc150_accel_samp_freq_table[i].val2 == val2) { - ret = i2c_smbus_write_byte_data( - data->client, + ret = regmap_write(data->regmap, BMC150_ACCEL_REG_PMU_BW, bmc150_accel_samp_freq_table[i].bw_bits); if (ret < 0) @@ -307,26 +316,19 @@ static int bmc150_accel_set_bw(struct bmc150_accel_data *data, int val, static int bmc150_accel_update_slope(struct bmc150_accel_data *data) { - int ret, val; + int ret; - ret = i2c_smbus_write_byte_data(data->client, BMC150_ACCEL_REG_INT_6, + ret = regmap_write(data->regmap, BMC150_ACCEL_REG_INT_6, data->slope_thres); if (ret < 0) { dev_err(&data->client->dev, "Error writing reg_int_6\n"); return ret; } - ret = i2c_smbus_read_byte_data(data->client, BMC150_ACCEL_REG_INT_5); + ret = regmap_update_bits(data->regmap, BMC150_ACCEL_REG_INT_5, + BMC150_ACCEL_SLOPE_DUR_MASK, data->slope_dur); if (ret < 0) { - dev_err(&data->client->dev, "Error reading reg_int_5\n"); - return ret; - } - - val = (ret & ~BMC150_ACCEL_SLOPE_DUR_MASK) | data->slope_dur; - ret = i2c_smbus_write_byte_data(data->client, BMC150_ACCEL_REG_INT_5, - val); - if (ret < 0) { - dev_err(&data->client->dev, "Error write reg_int_5\n"); + dev_err(&data->client->dev, "Error updating reg_int_5\n"); return ret; } @@ -348,17 +350,18 @@ static int bmc150_accel_any_motion_setup(struct bmc150_accel_trigger *t, static int bmc150_accel_chip_init(struct bmc150_accel_data *data) { int ret; + unsigned int val; - ret = i2c_smbus_read_byte_data(data->client, BMC150_ACCEL_REG_CHIP_ID); + ret = regmap_read(data->regmap, BMC150_ACCEL_REG_CHIP_ID, &val); if (ret < 0) { dev_err(&data->client->dev, "Error: Reading chip id\n"); return ret; } - dev_dbg(&data->client->dev, "Chip Id %x\n", ret); - if (ret != data->chip_info->chip_id) { - dev_err(&data->client->dev, "Invalid chip %x\n", ret); + dev_dbg(&data->client->dev, "Chip Id %x\n", val); + if (val != data->chip_info->chip_id) { + dev_err(&data->client->dev, "Invalid chip %x\n", val); return -ENODEV; } @@ -372,9 +375,8 @@ static int bmc150_accel_chip_init(struct bmc150_accel_data *data) return ret; /* Set Default Range */ - ret = i2c_smbus_write_byte_data(data->client, - BMC150_ACCEL_REG_PMU_RANGE, - BMC150_ACCEL_DEF_RANGE_4G); + ret = regmap_write(data->regmap, BMC150_ACCEL_REG_PMU_RANGE, + BMC150_ACCEL_DEF_RANGE_4G); if (ret < 0) { dev_err(&data->client->dev, "Error writing reg_pmu_range\n"); @@ -391,10 +393,9 @@ static int bmc150_accel_chip_init(struct bmc150_accel_data *data) return ret; /* Set default as latched interrupts */ - ret = i2c_smbus_write_byte_data(data->client, - BMC150_ACCEL_REG_INT_RST_LATCH, - BMC150_ACCEL_INT_MODE_LATCH_INT | - BMC150_ACCEL_INT_MODE_LATCH_RESET); + ret = regmap_write(data->regmap, BMC150_ACCEL_REG_INT_RST_LATCH, + BMC150_ACCEL_INT_MODE_LATCH_INT | + BMC150_ACCEL_INT_MODE_LATCH_RESET); if (ret < 0) { dev_err(&data->client->dev, "Error writing reg_int_rst_latch\n"); @@ -527,38 +528,18 @@ static int bmc150_accel_set_interrupt(struct bmc150_accel_data *data, int i, return ret; /* map the interrupt to the appropriate pins */ - ret = i2c_smbus_read_byte_data(data->client, info->map_reg); - if (ret < 0) { - dev_err(&data->client->dev, "Error reading reg_int_map\n"); - goto out_fix_power_state; - } - if (state) - ret |= info->map_bitmask; - else - ret &= ~info->map_bitmask; - - ret = i2c_smbus_write_byte_data(data->client, info->map_reg, - ret); + ret = regmap_update_bits(data->regmap, info->map_reg, info->map_bitmask, + (state ? info->map_bitmask : 0)); if (ret < 0) { - dev_err(&data->client->dev, "Error writing reg_int_map\n"); + dev_err(&data->client->dev, "Error updating reg_int_map\n"); goto out_fix_power_state; } /* enable/disable the interrupt */ - ret = i2c_smbus_read_byte_data(data->client, info->en_reg); - if (ret < 0) { - dev_err(&data->client->dev, "Error reading reg_int_en\n"); - goto out_fix_power_state; - } - - if (state) - ret |= info->en_bitmask; - else - ret &= ~info->en_bitmask; - - ret = i2c_smbus_write_byte_data(data->client, info->en_reg, ret); + ret = regmap_update_bits(data->regmap, info->en_reg, info->en_bitmask, + (state ? info->en_bitmask : 0)); if (ret < 0) { - dev_err(&data->client->dev, "Error writing reg_int_en\n"); + dev_err(&data->client->dev, "Error updating reg_int_en\n"); goto out_fix_power_state; } @@ -581,8 +562,7 @@ static int bmc150_accel_set_scale(struct bmc150_accel_data *data, int val) for (i = 0; i < ARRAY_SIZE(data->chip_info->scale_table); ++i) { if (data->chip_info->scale_table[i].scale == val) { - ret = i2c_smbus_write_byte_data( - data->client, + ret = regmap_write(data->regmap, BMC150_ACCEL_REG_PMU_RANGE, data->chip_info->scale_table[i].reg_range); if (ret < 0) { @@ -602,16 +582,17 @@ static int bmc150_accel_set_scale(struct bmc150_accel_data *data, int val) static int bmc150_accel_get_temp(struct bmc150_accel_data *data, int *val) { int ret; + unsigned int value; mutex_lock(&data->mutex); - ret = i2c_smbus_read_byte_data(data->client, BMC150_ACCEL_REG_TEMP); + ret = regmap_read(data->regmap, BMC150_ACCEL_REG_TEMP, &value); if (ret < 0) { dev_err(&data->client->dev, "Error reading reg_temp\n"); mutex_unlock(&data->mutex); return ret; } - *val = sign_extend32(ret, 7); + *val = sign_extend32(value, 7); mutex_unlock(&data->mutex); @@ -624,6 +605,7 @@ static int bmc150_accel_get_axis(struct bmc150_accel_data *data, { int ret; int axis = chan->scan_index; + unsigned int raw_val; mutex_lock(&data->mutex); ret = bmc150_accel_set_power_state(data, true); @@ -632,15 +614,15 @@ static int bmc150_accel_get_axis(struct bmc150_accel_data *data, return ret; } - ret = i2c_smbus_read_word_data(data->client, - BMC150_ACCEL_AXIS_TO_REG(axis)); + ret = regmap_bulk_read(data->regmap, BMC150_ACCEL_AXIS_TO_REG(axis), + &raw_val, 2); if (ret < 0) { dev_err(&data->client->dev, "Error reading axis %d\n", axis); bmc150_accel_set_power_state(data, false); mutex_unlock(&data->mutex); return ret; } - *val = sign_extend32(ret >> chan->scan_type.shift, + *val = sign_extend32(raw_val >> chan->scan_type.shift, chan->scan_type.realbits - 1); ret = bmc150_accel_set_power_state(data, false); mutex_unlock(&data->mutex); @@ -904,52 +886,37 @@ static int bmc150_accel_set_watermark(struct iio_dev *indio_dev, unsigned val) * We must read at least one full frame in one burst, otherwise the rest of the * frame data is discarded. */ -static int bmc150_accel_fifo_transfer(const struct i2c_client *client, +static int bmc150_accel_fifo_transfer(struct bmc150_accel_data *data, char *buffer, int samples) { int sample_length = 3 * 2; - u8 reg_fifo_data = BMC150_ACCEL_REG_FIFO_DATA; - int ret = -EIO; - - if (i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { - struct i2c_msg msg[2] = { - { - .addr = client->addr, - .flags = 0, - .buf = ®_fifo_data, - .len = sizeof(reg_fifo_data), - }, - { - .addr = client->addr, - .flags = I2C_M_RD, - .buf = (u8 *)buffer, - .len = samples * sample_length, - } - }; + int ret; + int total_length = samples * sample_length; + int i, step; - ret = i2c_transfer(client->adapter, msg, 2); - if (ret != 2) - ret = -EIO; - else - ret = 0; - } else { - int i, step = I2C_SMBUS_BLOCK_MAX / sample_length; - - for (i = 0; i < samples * sample_length; i += step) { - ret = i2c_smbus_read_i2c_block_data(client, - reg_fifo_data, step, - &buffer[i]); - if (ret != step) { - ret = -EIO; - break; - } + ret = regmap_raw_read(data->regmap, BMC150_ACCEL_REG_FIFO_DATA, buffer, + total_length); + if (ret != -E2BIG) { + if (ret) + dev_err(data->dev, "Error transferring data from fifo\n"); + return ret; + } - ret = 0; - } + /* + * Seems we have a bus with size limitation so we have to execute + * multiple reads + */ + step = regmap_get_raw_io_max(data->regmap) / sample_length; + for (i = -1; i < samples * sample_length; i += step) { + ret = regmap_raw_read(data->regmap, BMC150_ACCEL_REG_FIFO_DATA, + &buffer[i], step); + if (ret) + break; } if (ret) - dev_err(&client->dev, "Error transferring data from fifo\n"); + dev_err(data->dev, "Error transferring data from fifo in single steps of %zu\n", + step); return ret; } @@ -963,14 +930,15 @@ static int __bmc150_accel_fifo_flush(struct iio_dev *indio_dev, u16 buffer[BMC150_ACCEL_FIFO_LENGTH * 3]; int64_t tstamp; uint64_t sample_period; - ret = i2c_smbus_read_byte_data(data->client, - BMC150_ACCEL_REG_FIFO_STATUS); + unsigned int val; + + ret = regmap_read(data->regmap, BMC150_ACCEL_REG_FIFO_STATUS, &val); if (ret < 0) { dev_err(&data->client->dev, "Error reading reg_fifo_status\n"); return ret; } - count = ret & 0x7F; + count = val & 0x7F; if (!count) return 0; @@ -1009,7 +977,7 @@ static int __bmc150_accel_fifo_flush(struct iio_dev *indio_dev, if (samples && count > samples) count = samples; - ret = bmc150_accel_fifo_transfer(data->client, (u8 *)buffer, count); + ret = bmc150_accel_fifo_transfer(data, (u8 *)buffer, count); if (ret) return ret; @@ -1206,17 +1174,19 @@ static irqreturn_t bmc150_accel_trigger_handler(int irq, void *p) struct iio_dev *indio_dev = pf->indio_dev; struct bmc150_accel_data *data = iio_priv(indio_dev); int bit, ret, i = 0; + unsigned int raw_val; mutex_lock(&data->mutex); for_each_set_bit(bit, indio_dev->active_scan_mask, indio_dev->masklength) { - ret = i2c_smbus_read_word_data(data->client, - BMC150_ACCEL_AXIS_TO_REG(bit)); + ret = regmap_bulk_read(data->regmap, + BMC150_ACCEL_AXIS_TO_REG(bit), &raw_val, + 2); if (ret < 0) { mutex_unlock(&data->mutex); goto err_read; } - data->buffer[i++] = ret; + data->buffer[i++] = raw_val; } mutex_unlock(&data->mutex); @@ -1240,10 +1210,9 @@ static int bmc150_accel_trig_try_reen(struct iio_trigger *trig) mutex_lock(&data->mutex); /* clear any latched interrupt */ - ret = i2c_smbus_write_byte_data(data->client, - BMC150_ACCEL_REG_INT_RST_LATCH, - BMC150_ACCEL_INT_MODE_LATCH_INT | - BMC150_ACCEL_INT_MODE_LATCH_RESET); + ret = regmap_write(data->regmap, BMC150_ACCEL_REG_INT_RST_LATCH, + BMC150_ACCEL_INT_MODE_LATCH_INT | + BMC150_ACCEL_INT_MODE_LATCH_RESET); mutex_unlock(&data->mutex); if (ret < 0) { dev_err(&data->client->dev, @@ -1300,34 +1269,34 @@ static int bmc150_accel_handle_roc_event(struct iio_dev *indio_dev) struct bmc150_accel_data *data = iio_priv(indio_dev); int dir; int ret; + unsigned int val; - ret = i2c_smbus_read_byte_data(data->client, - BMC150_ACCEL_REG_INT_STATUS_2); + ret = regmap_read(data->regmap, BMC150_ACCEL_REG_INT_STATUS_2, &val); if (ret < 0) { dev_err(&data->client->dev, "Error reading reg_int_status_2\n"); return ret; } - if (ret & BMC150_ACCEL_ANY_MOTION_BIT_SIGN) + if (val & BMC150_ACCEL_ANY_MOTION_BIT_SIGN) dir = IIO_EV_DIR_FALLING; else dir = IIO_EV_DIR_RISING; - if (ret & BMC150_ACCEL_ANY_MOTION_BIT_X) + if (val & BMC150_ACCEL_ANY_MOTION_BIT_X) iio_push_event(indio_dev, IIO_MOD_EVENT_CODE(IIO_ACCEL, 0, IIO_MOD_X, IIO_EV_TYPE_ROC, dir), data->timestamp); - if (ret & BMC150_ACCEL_ANY_MOTION_BIT_Y) + if (val & BMC150_ACCEL_ANY_MOTION_BIT_Y) iio_push_event(indio_dev, IIO_MOD_EVENT_CODE(IIO_ACCEL, 0, IIO_MOD_Y, IIO_EV_TYPE_ROC, dir), data->timestamp); - if (ret & BMC150_ACCEL_ANY_MOTION_BIT_Z) + if (val & BMC150_ACCEL_ANY_MOTION_BIT_Z) iio_push_event(indio_dev, IIO_MOD_EVENT_CODE(IIO_ACCEL, 0, IIO_MOD_Z, @@ -1360,10 +1329,9 @@ static irqreturn_t bmc150_accel_irq_thread_handler(int irq, void *private) } if (ack) { - ret = i2c_smbus_write_byte_data(data->client, - BMC150_ACCEL_REG_INT_RST_LATCH, - BMC150_ACCEL_INT_MODE_LATCH_INT | - BMC150_ACCEL_INT_MODE_LATCH_RESET); + ret = regmap_write(data->regmap, BMC150_ACCEL_REG_INT_RST_LATCH, + BMC150_ACCEL_INT_MODE_LATCH_INT | + BMC150_ACCEL_INT_MODE_LATCH_RESET); if (ret) dev_err(&data->client->dev, "Error writing reg_int_rst_latch\n"); ret = IRQ_HANDLED; @@ -1516,7 +1484,7 @@ static int bmc150_accel_fifo_set_mode(struct bmc150_accel_data *data) u8 reg = BMC150_ACCEL_REG_FIFO_CONFIG1; int ret; - ret = i2c_smbus_write_byte_data(data->client, reg, data->fifo_mode); + ret = regmap_write(data->regmap, reg, data->fifo_mode); if (ret < 0) { dev_err(&data->client->dev, "Error writing reg_fifo_config1\n"); return ret; @@ -1525,9 +1493,8 @@ static int bmc150_accel_fifo_set_mode(struct bmc150_accel_data *data) if (!data->fifo_mode) return 0; - ret = i2c_smbus_write_byte_data(data->client, - BMC150_ACCEL_REG_FIFO_CONFIG0, - data->watermark); + ret = regmap_write(data->regmap, BMC150_ACCEL_REG_FIFO_CONFIG0, + data->watermark); if (ret < 0) dev_err(&data->client->dev, "Error writing reg_fifo_config0\n"); @@ -1627,6 +1594,13 @@ static int bmc150_accel_probe(struct i2c_client *client, data = iio_priv(indio_dev); i2c_set_clientdata(client, indio_dev); data->client = client; + data->dev = &client->dev; + + data->regmap = devm_regmap_init_i2c(client, &bmc150_i2c_regmap_conf); + if (IS_ERR(data->regmap)) { + dev_err(&client->dev, "Failed to initialize i2c regmap\n"); + return PTR_ERR(data->regmap); + } if (id) { name = id->name; @@ -1680,9 +1654,8 @@ static int bmc150_accel_probe(struct i2c_client *client, * want to use latch mode when we can to prevent interrupt * flooding. */ - ret = i2c_smbus_write_byte_data(data->client, - BMC150_ACCEL_REG_INT_RST_LATCH, - BMC150_ACCEL_INT_MODE_LATCH_RESET); + ret = regmap_write(data->regmap, BMC150_ACCEL_REG_INT_RST_LATCH, + BMC150_ACCEL_INT_MODE_LATCH_RESET); if (ret < 0) { dev_err(&data->client->dev, "Error writing reg_int_rst_latch\n"); goto err_buffer_cleanup; -- 2.4.6 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/