Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751931AbbHLLfU (ORCPT ); Wed, 12 Aug 2015 07:35:20 -0400 Received: from mail-wi0-f179.google.com ([209.85.212.179]:38713 "EHLO mail-wi0-f179.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1750912AbbHLLfS (ORCPT ); Wed, 12 Aug 2015 07:35:18 -0400 Date: Wed, 12 Aug 2015 17:02:03 +0530 From: maitysanchayan@gmail.com To: Srinivas Kandagatla Cc: gregkh@linuxfoundation.org, maxime.ripard@free-electrons.com, linux-arm-kernel@lists.infradead.org, stefan@agner.ch, shawnguo@kernel.org, kernel@pengutronix.de, stefan.wahren@i2se.com, linux-kernel@vger.kernel.org, p.zabel@pengutronix.de Subject: Re: [PATCH v8 3/4] drivers: nvmem: Add Vybrid OCOTP support Message-ID: <20150812113203.GA15470@Sanchayan-Arch.toradex.int> References: <29b527f1897b24a310a3f3acee61c721d3399503.1439214648.git.maitysanchayan@gmail.com> <55CB22F3.2000702@linaro.org> MIME-Version: 1.0 Content-Type: text/plain; charset=utf-8 Content-Disposition: inline In-Reply-To: <55CB22F3.2000702@linaro.org> User-Agent: Mutt/1.5.23 (2014-03-12) Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 12062 Lines: 391 Hello, On 15-08-12 11:41:55, Srinivas Kandagatla wrote: > Hi Sanchayan, > > Please run checkpatch before you send the patch next time. > Look at Documentation/SubmittingPatches for more details. > > WARNING: line over 80 characters > #225: FILE: drivers/nvmem/vf610-ocotp.c:174: > + ret = vf610_ocotp_wait_busy(ocotp->base + OCOTP_CTRL_REG); > > WARNING: line over 80 characters > #237: FILE: drivers/nvmem/vf610-ocotp.c:186: > + ret = vf610_ocotp_wait_busy(ocotp->base + OCOTP_CTRL_REG); > > WARNING: line over 80 characters > #244: FILE: drivers/nvmem/vf610-ocotp.c:193: > + writel(OCOTP_CTRL_ERROR, ocotp->base + OCOTP_CTRL_CLR); > I had. However splitting these lines seemed odd. Will split and fix. > > On 10/08/15 15:11, Sanchayan Maity wrote: > > The patch adds support for the On Chip One Time Programmable Peripheral > > (OCOTP) on the Vybrid platform. > > > > Signed-off-by: Sanchayan Maity > > --- > > drivers/nvmem/Kconfig | 10 ++ > > drivers/nvmem/Makefile | 2 + > > drivers/nvmem/vf610-ocotp.c | 301 ++++++++++++++++++++++++++++++++++++++++++++ > > 3 files changed, 313 insertions(+) > > create mode 100644 drivers/nvmem/vf610-ocotp.c > > > > diff --git a/drivers/nvmem/Kconfig b/drivers/nvmem/Kconfig > > index 0b33014..7af4c1d 100644 > > --- a/drivers/nvmem/Kconfig > > +++ b/drivers/nvmem/Kconfig > > @@ -47,4 +47,14 @@ config NVMEM_IMX_OCOTP > > This driver can also be built as a module. If so, the module > > will be called nvmem-imx-ocotp. > > > > Also please can you rebase it on top of char-misc-next?, This patch > would not apply as it is because of the above context. Sure. Will rebase and send. Thanks. Regards, Sanchayan. > > > > +config NVMEM_VF610_OCOTP > > + tristate "VF610_SoCs OCOTP support" > > + depends on SOC_VF610 || COMPILE_TEST > > + help > > + This is a driver for the 'OCOTP' peripheral available on Vybrid > > + devices like VF5xx and VF6xx. > > + > > + This driver can also be built as a module. If so, the module will > > + be called nvmem-vf610-ocotp. > > + > > endif > > diff --git a/drivers/nvmem/Makefile b/drivers/nvmem/Makefile > > index b512d77..8a1eea8 100644 > > --- a/drivers/nvmem/Makefile > > +++ b/drivers/nvmem/Makefile > > @@ -12,3 +12,5 @@ obj-$(CONFIG_NVMEM_SUNXI_SID) += nvmem_sunxi_sid.o > > nvmem_sunxi_sid-y := sunxi_sid.o > > obj-$(CONFIG_NVMEM_IMX_OCOTP) += nvmem-imx-ocotp.o > > nvmem-imx-ocotp-y := imx-ocotp.o > > +obj-$(CONFIG_NVMEM_VF610_OCOTP) += nvmem-vf610-ocotp.o > > +nvmem-vf610-ocotp-y := vf610-ocotp.o > > diff --git a/drivers/nvmem/vf610-ocotp.c b/drivers/nvmem/vf610-ocotp.c > > new file mode 100644 > > index 0000000..9e18156 > > --- /dev/null > > +++ b/drivers/nvmem/vf610-ocotp.c > > @@ -0,0 +1,301 @@ > > +/* > > + * Copyright (C) 2015 Toradex AG. > > + * > > + * Author: Sanchayan Maity > > + * > > + * Based on the barebox ocotp driver, > > + * Copyright (c) 2010 Baruch Siach > > + * Orex Computed Radiography > > + * > > + * This program is free software; you can redistribute it and/or modify > > + * it under the terms of the GNU General Public License version 2 and > > + * only version 2 as published by the Free Software Foundation. > > + * > > + * This program is distributed in the hope that it will be useful, > > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > > + * GNU General Public License for more details. > > + */ > > + > > +#include > > +#include > > +#include > > +#include > > +#include > > +#include > > +#include > > +#include > > +#include > > +#include > > + > > +/* OCOTP Register Offsets */ > > +#define OCOTP_CTRL_REG 0x00 > > +#define OCOTP_CTRL_SET 0x04 > > +#define OCOTP_CTRL_CLR 0x08 > > +#define OCOTP_TIMING 0x10 > > +#define OCOTP_DATA 0x20 > > +#define OCOTP_READ_CTRL_REG 0x30 > > +#define OCOTP_READ_FUSE_DATA 0x40 > > + > > +/* OCOTP Register bits and masks */ > > +#define OCOTP_CTRL_WR_UNLOCK 16 > > +#define OCOTP_CTRL_WR_UNLOCK_KEY 0x3E77 > > +#define OCOTP_CTRL_WR_UNLOCK_MASK GENMASK(31, 16) > > +#define OCOTP_CTRL_ADDR 0 > > +#define OCOTP_CTRL_ADDR_MASK GENMASK(6, 0) > > +#define OCOTP_CTRL_RELOAD_SHADOWS BIT(10) > > +#define OCOTP_CTRL_ERROR BIT(9) > > +#define OCOTP_CTRL_BUSY BIT(8) > > + > > +#define OCOTP_TIMING_STROBE_READ 16 > > +#define OCOTP_TIMING_STROBE_READ_MASK GENMASK(21, 16) > > +#define OCOTP_TIMING_RELAX 12 > > +#define OCOTP_TIMING_RELAX_MASK GENMASK(15, 12) > > +#define OCOTP_TIMING_STROBE_PROG 0 > > +#define OCOTP_TIMING_STROBE_PROG_MASK GENMASK(11, 0) > > + > > +#define OCOTP_READ_CTRL_READ_FUSE 0x1 > > + > > +#define VF610_OCOTP_TIMEOUT 100000 > > + > > +#define BF(value, field) (((value) << field) & field##_MASK) > > + > > +#define DEF_RELAX 20 > > + > > +static const int base_to_fuse_addr_mappings[][2] = { > > + {0x400, 0x00}, > > + {0x410, 0x01}, > > + {0x420, 0x02}, > > + {0x450, 0x05}, > > + {0x4F0, 0x0F}, > > + {0x600, 0x20}, > > + {0x610, 0x21}, > > + {0x620, 0x22}, > > + {0x630, 0x23}, > > + {0x640, 0x24}, > > + {0x650, 0x25}, > > + {0x660, 0x26}, > > + {0x670, 0x27}, > > + {0x6F0, 0x2F}, > > + {0x880, 0x38}, > > + {0x890, 0x39}, > > + {0x8A0, 0x3A}, > > + {0x8B0, 0x3B}, > > + {0x8C0, 0x3C}, > > + {0x8D0, 0x3D}, > > + {0x8E0, 0x3E}, > > + {0x8F0, 0x3F}, > > + {0xC80, 0x78}, > > + {0xC90, 0x79}, > > + {0xCA0, 0x7A}, > > + {0xCB0, 0x7B}, > > + {0xCC0, 0x7C}, > > + {0xCD0, 0x7D}, > > + {0xCE0, 0x7E}, > > + {0xCF0, 0x7F}, > > +}; > > + > > +struct vf610_ocotp { > > + void __iomem *base; > > + struct clk *clk; > > + struct device *dev; > > + struct nvmem_device *nvmem; > > + int timing; > > +}; > > + > > +static int vf610_ocotp_wait_busy(void __iomem *base) > > +{ > > + int timeout = VF610_OCOTP_TIMEOUT; > > + > > + while ((readl(base) & OCOTP_CTRL_BUSY) && --timeout) > > + udelay(10); > > + > > + if (!timeout) { > > + writel(OCOTP_CTRL_ERROR, base + OCOTP_CTRL_CLR); > > + return -ETIMEDOUT; > > + } > > + > > + udelay(10); > > + > > + return 0; > > +} > > + > > +static int vf610_ocotp_calculate_timing(struct vf610_ocotp *ocotp_dev) > > +{ > > + u32 clk_rate; > > + u32 relax, strobe_read, strobe_prog; > > + u32 timing; > > + > > + clk_rate = clk_get_rate(ocotp_dev->clk); > > + > > + /* Refer section OTP read/write timing parameters in TRM */ > > + relax = clk_rate / (1000000000 / DEF_RELAX) - 1; > > + strobe_prog = clk_rate / (1000000000 / 10000) + 2 * (DEF_RELAX + 1) - 1; > > + strobe_read = clk_rate / (1000000000 / 40) + 2 * (DEF_RELAX + 1) - 1; > > + > > + timing = BF(relax, OCOTP_TIMING_RELAX); > > + timing |= BF(strobe_read, OCOTP_TIMING_STROBE_READ); > > + timing |= BF(strobe_prog, OCOTP_TIMING_STROBE_PROG); > > + > > + return timing; > > +} > > + > > +static int vf610_get_fuse_address(int base_addr_offset) > > +{ > > + int i; > > + > > + for (i = 0; i < ARRAY_SIZE(base_to_fuse_addr_mappings); i++) { > > + if (base_to_fuse_addr_mappings[i][0] == base_addr_offset) > > + return base_to_fuse_addr_mappings[i][1]; > > + } > > + > > + return -EINVAL; > > +} > > + > > +static int vf610_ocotp_write(void *context, const void *data, size_t count) > > +{ > > + return 0; > > +} > > + > > +static int vf610_ocotp_read(void *context, > > + const void *off, size_t reg_size, > > + void *val, size_t val_size) > > +{ > > + struct vf610_ocotp *ocotp = context; > > + unsigned int offset = *(u32 *)off; > > + u32 reg, *buf = val; > > + int fuse_addr; > > + int ret; > > + > > + while (val_size > 0) { > > + fuse_addr = vf610_get_fuse_address(offset); > > + if (fuse_addr > 0) { > > + writel(ocotp->timing, ocotp->base + OCOTP_TIMING); > > + ret = vf610_ocotp_wait_busy(ocotp->base + OCOTP_CTRL_REG); > > + if (ret) > > + return ret; > > + > > + reg = readl(ocotp->base + OCOTP_CTRL_REG); > > + reg &= ~OCOTP_CTRL_ADDR_MASK; > > + reg &= ~OCOTP_CTRL_WR_UNLOCK_MASK; > > + reg |= BF(fuse_addr, OCOTP_CTRL_ADDR); > > + writel(reg, ocotp->base + OCOTP_CTRL_REG); > > + > > + writel(OCOTP_READ_CTRL_READ_FUSE, > > + ocotp->base + OCOTP_READ_CTRL_REG); > > + ret = vf610_ocotp_wait_busy(ocotp->base + OCOTP_CTRL_REG); > > + if (ret) > > + return ret; > > + > > + if (readl(ocotp->base) & OCOTP_CTRL_ERROR) { > > + dev_dbg(ocotp->dev, "Error reading from fuse address %x\n", > > + fuse_addr); > > + writel(OCOTP_CTRL_ERROR, ocotp->base + OCOTP_CTRL_CLR); > > + } > > + > > + /* > > + * In case of error, we do not abort and expect to read > > + * 0xBADABADA as mentioned by the TRM. We just read this > > + * value and return. > > + */ > > + *buf = readl(ocotp->base + OCOTP_READ_FUSE_DATA); > > + } else { > > + *buf = 0; > > + } > > + > > + buf++; > > + val_size--; > > + offset += reg_size; > > + } > > + > > + return 0; > > +} > > + > > +static struct regmap_bus vf610_ocotp_bus = { > > + .read = vf610_ocotp_read, > > + .write = vf610_ocotp_write, > > + .reg_format_endian_default = REGMAP_ENDIAN_NATIVE, > > + .val_format_endian_default = REGMAP_ENDIAN_NATIVE, > > +}; > > + > > +static struct regmap_config ocotp_regmap_config = { > > + .reg_bits = 32, > > + .val_bits = 32, > > + .reg_stride = 4, > > +}; > > + > > +static struct nvmem_config ocotp_config = { > > + .name = "ocotp", > > + .owner = THIS_MODULE, > > +}; > > + > > +static const struct of_device_id ocotp_of_match[] = { > > + { .compatible = "fsl,vf610-ocotp", }, > > + {/* sentinel */}, > > +}; > > +MODULE_DEVICE_TABLE(of, ocotp_of_match); > > + > > +static int vf610_ocotp_remove(struct platform_device *pdev) > > +{ > > + struct vf610_ocotp *ocotp_dev = platform_get_drvdata(pdev); > > + > > + return nvmem_unregister(ocotp_dev->nvmem); > > +} > > + > > +static int vf610_ocotp_probe(struct platform_device *pdev) > > +{ > > + struct device *dev = &pdev->dev; > > + struct resource *res; > > + struct regmap *regmap; > > + struct vf610_ocotp *ocotp_dev; > > + > > + ocotp_dev = devm_kzalloc(&pdev->dev, > > + sizeof(struct vf610_ocotp), GFP_KERNEL); > > + if (!ocotp_dev) > > + return -ENOMEM; > > + > > + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); > > + ocotp_dev->base = devm_ioremap_resource(dev, res); > > + if (IS_ERR(ocotp_dev->base)) > > + return PTR_ERR(ocotp_dev->base); > > + > > + ocotp_dev->clk = devm_clk_get(dev, "ocotp"); > > + if (IS_ERR(ocotp_dev->clk)) { > > + dev_err(dev, "failed getting clock, err = %ld\n", > > + PTR_ERR(ocotp_dev->clk)); > > + return PTR_ERR(ocotp_dev->clk); > > + } > > + > > + ocotp_regmap_config.max_register = resource_size(res); > > + regmap = devm_regmap_init(dev, > > + &vf610_ocotp_bus, ocotp_dev, &ocotp_regmap_config); > > + if (IS_ERR(regmap)) { > > + dev_err(dev, "regmap init failed\n"); > > + return PTR_ERR(regmap); > > + } > > + ocotp_config.dev = dev; > > + > > + ocotp_dev->nvmem = nvmem_register(&ocotp_config); > > + if (IS_ERR(ocotp_dev->nvmem)) > > + return PTR_ERR(ocotp_dev->nvmem); > > + > > + ocotp_dev->dev = dev; > > + platform_set_drvdata(pdev, ocotp_dev); > > + > > + ocotp_dev->timing = vf610_ocotp_calculate_timing(ocotp_dev); > > + > > + return 0; > > +} > > + > > +static struct platform_driver vf610_ocotp_driver = { > > + .probe = vf610_ocotp_probe, > > + .remove = vf610_ocotp_remove, > > + .driver = { > > + .name = "vf610-ocotp", > > + .of_match_table = ocotp_of_match, > > + }, > > +}; > > +module_platform_driver(vf610_ocotp_driver); > > +MODULE_AUTHOR("Sanchayan Maity "); > > +MODULE_DESCRIPTION("Vybrid OCOTP driver"); > > +MODULE_LICENSE("GPL v2"); > > -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/