Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S933055AbbHLNvo (ORCPT ); Wed, 12 Aug 2015 09:51:44 -0400 Received: from down.free-electrons.com ([37.187.137.238]:35608 "EHLO mail.free-electrons.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1752790AbbHLNvm (ORCPT ); Wed, 12 Aug 2015 09:51:42 -0400 From: Antoine Tenart To: sebastian.hesselbarth@gmail.com, thierry.reding@gmail.com Cc: Antoine Tenart , zmxu@marvell.com, jszhang@marvell.com, linux-arm-kernel@lists.infradead.org, linux-pwm@vger.kernel.org, linux-kernel@vger.kernel.org Subject: [PATCH v3 3/5] ARM: berlin: add a PWM node on the BG2Q Date: Wed, 12 Aug 2015 15:51:35 +0200 Message-Id: <1439387497-6863-4-git-send-email-antoine.tenart@free-electrons.com> X-Mailer: git-send-email 2.5.0 In-Reply-To: <1439387497-6863-1-git-send-email-antoine.tenart@free-electrons.com> References: <1439387497-6863-1-git-send-email-antoine.tenart@free-electrons.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 981 Lines: 34 This patch adds a PWM node in the Berlin BG2Q device tree, using the newly added Berlin PWM driver. Signed-off-by: Antoine Tenart --- arch/arm/boot/dts/berlin2q.dtsi | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/arch/arm/boot/dts/berlin2q.dtsi b/arch/arm/boot/dts/berlin2q.dtsi index 63a48490e2f9..5bfa71a87617 100644 --- a/arch/arm/boot/dts/berlin2q.dtsi +++ b/arch/arm/boot/dts/berlin2q.dtsi @@ -477,6 +477,13 @@ status = "disabled"; }; + pwm: pwm@f20000 { + compatible = "marvell,berlin-pwm"; + reg = <0xf20000 0x40>; + clocks = <&chip_clk CLKID_CFG>; + #pwm-cells = <3>; + }; + apb@fc0000 { compatible = "simple-bus"; #address-cells = <1>; -- 2.5.0 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/