Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754221AbbHMVeO (ORCPT ); Thu, 13 Aug 2015 17:34:14 -0400 Received: from smtp.codeaurora.org ([198.145.29.96]:57863 "EHLO smtp.codeaurora.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751923AbbHMVeL (ORCPT ); Thu, 13 Aug 2015 17:34:11 -0400 From: Mathieu Olivari To: robh+dt@kernel.org, pawel.moll@arm.com, mark.rutland@arm.com, ijc+devicetree@hellion.org.uk, galak@codeaurora.org, linux@arm.linux.org.uk, dwmw2@infradead.org, computersforpeace@gmail.com, agross@codeaurora.org, sboyd@codeaurora.org, bjorn.andersson@sonymobile.com Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, linux-mtd@lists.infradead.org, Mathieu Olivari Subject: [PATCH 0/3] qcom: Add SMEM MTD parser Date: Thu, 13 Aug 2015 14:33:37 -0700 Message-Id: <1439501620-24073-1-git-send-email-mathieu@codeaurora.org> X-Mailer: git-send-email 2.1.4 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 1005 Lines: 27 QCOM platforms such as IPQ806x are using SMEM to store their flash layout. This patch set adds the DT nodes required to instanciate SMEM on IPQ806x and add an MTD parser using it. This change is based on the SMEM driver posted here: *https://lkml.org/lkml/2015/7/27/1125 Mathieu Olivari (3): ARM: qcom: add SFPB nodes to IPQ806x dts ARM: qcom: add SMEM device node to IPQ806x dts mtd: add SMEM parser for QCOM platforms arch/arm/boot/dts/qcom-ipq8064.dtsi | 23 +++- drivers/mtd/Kconfig | 7 ++ drivers/mtd/Makefile | 1 + drivers/mtd/qcom_smem_part.c | 224 ++++++++++++++++++++++++++++++++++++ 4 files changed, 254 insertions(+), 1 deletion(-) create mode 100644 drivers/mtd/qcom_smem_part.c -- 2.1.4 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/