Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753190AbbHOOl3 (ORCPT ); Sat, 15 Aug 2015 10:41:29 -0400 Received: from saturn.retrosnub.co.uk ([178.18.118.26]:47449 "EHLO saturn.retrosnub.co.uk" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752183AbbHOOl1 (ORCPT ); Sat, 15 Aug 2015 10:41:27 -0400 Subject: Re: [PATCH v3 1/6] iio: bmg160: Use i2c regmap instead of direct i2c access To: Srinivas Pandruvada , Markus Pargmann References: <1439391009-6051-1-git-send-email-mpa@pengutronix.de> <1439391009-6051-2-git-send-email-mpa@pengutronix.de> <1439395274.2244.34.camel@spandruv-desk3.jf.intel.com> Cc: Vlad Dogaru , Paul Bolle , linux-iio@vger.kernel.org, linux-kernel@vger.kernel.org, kernel@pengutronix.de From: Jonathan Cameron Message-ID: <55CF4F94.1090903@kernel.org> Date: Sat, 15 Aug 2015 15:41:24 +0100 User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:38.0) Gecko/20100101 Thunderbird/38.1.0 MIME-Version: 1.0 In-Reply-To: <1439395274.2244.34.camel@spandruv-desk3.jf.intel.com> Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 17141 Lines: 480 On 12/08/15 17:01, Srinivas Pandruvada wrote: > On Wed, 2015-08-12 at 16:50 +0200, Markus Pargmann wrote: >> This patch introduces regmap usage into the driver. This is done to >> later easily support the SPI interface of this chip. >> >> Signed-off-by: Markus Pargmann > Reviewed-by: Srinivas Pandruvada Applied to the togreg branch of iio.git. Initially pushed out as testing. Unfortunately these have probably just missed the merge window for this cycle. I'll get them to Greg and hence into linux-next in about 3-4 weeks time. Jonathan >> --- >> drivers/iio/gyro/Kconfig | 1 + >> drivers/iio/gyro/bmg160.c | 198 ++++++++++++++++++++-------------------------- >> 2 files changed, 88 insertions(+), 111 deletions(-) >> >> diff --git a/drivers/iio/gyro/Kconfig b/drivers/iio/gyro/Kconfig >> index 8d2439345673..cf82d74139a2 100644 >> --- a/drivers/iio/gyro/Kconfig >> +++ b/drivers/iio/gyro/Kconfig >> @@ -55,6 +55,7 @@ config BMG160 >> depends on I2C >> select IIO_BUFFER >> select IIO_TRIGGERED_BUFFER >> + select REGMAP_I2C >> help >> Say yes here to build support for Bosch BMG160 Tri-axis Gyro Sensor >> driver. This driver also supports BMI055 gyroscope. >> diff --git a/drivers/iio/gyro/bmg160.c b/drivers/iio/gyro/bmg160.c >> index 460bf715d541..bbe02053e98a 100644 >> --- a/drivers/iio/gyro/bmg160.c >> +++ b/drivers/iio/gyro/bmg160.c >> @@ -28,6 +28,7 @@ >> #include >> #include >> #include >> +#include >> >> #define BMG160_DRV_NAME "bmg160" >> #define BMG160_IRQ_NAME "bmg160_event" >> @@ -98,6 +99,7 @@ >> >> struct bmg160_data { >> struct i2c_client *client; >> + struct regmap *regmap; >> struct iio_trigger *dready_trig; >> struct iio_trigger *motion_trig; >> struct mutex mutex; >> @@ -134,12 +136,17 @@ static const struct { >> { 133, BMG160_RANGE_250DPS}, >> { 66, BMG160_RANGE_125DPS} }; >> >> +struct regmap_config bmg160_regmap_i2c_conf = { >> + .reg_bits = 8, >> + .val_bits = 8, >> + .max_register = 0x3f >> +}; >> + >> static int bmg160_set_mode(struct bmg160_data *data, u8 mode) >> { >> int ret; >> >> - ret = i2c_smbus_write_byte_data(data->client, >> - BMG160_REG_PMU_LPW, mode); >> + ret = regmap_write(data->regmap, BMG160_REG_PMU_LPW, mode); >> if (ret < 0) { >> dev_err(&data->client->dev, "Error writing reg_pmu_lpw\n"); >> return ret; >> @@ -169,8 +176,7 @@ static int bmg160_set_bw(struct bmg160_data *data, int val) >> if (bw_bits < 0) >> return bw_bits; >> >> - ret = i2c_smbus_write_byte_data(data->client, BMG160_REG_PMU_BW, >> - bw_bits); >> + ret = regmap_write(data->regmap, BMG160_REG_PMU_BW, bw_bits); >> if (ret < 0) { >> dev_err(&data->client->dev, "Error writing reg_pmu_bw\n"); >> return ret; >> @@ -184,16 +190,17 @@ static int bmg160_set_bw(struct bmg160_data *data, int val) >> static int bmg160_chip_init(struct bmg160_data *data) >> { >> int ret; >> + unsigned int val; >> >> - ret = i2c_smbus_read_byte_data(data->client, BMG160_REG_CHIP_ID); >> + ret = regmap_read(data->regmap, BMG160_REG_CHIP_ID, &val); >> if (ret < 0) { >> dev_err(&data->client->dev, "Error reading reg_chip_id\n"); >> return ret; >> } >> >> - dev_dbg(&data->client->dev, "Chip Id %x\n", ret); >> - if (ret != BMG160_CHIP_ID_VAL) { >> - dev_err(&data->client->dev, "invalid chip %x\n", ret); >> + dev_dbg(&data->client->dev, "Chip Id %x\n", val); >> + if (val != BMG160_CHIP_ID_VAL) { >> + dev_err(&data->client->dev, "invalid chip %x\n", val); >> return -ENODEV; >> } >> >> @@ -210,40 +217,31 @@ static int bmg160_chip_init(struct bmg160_data *data) >> return ret; >> >> /* Set Default Range */ >> - ret = i2c_smbus_write_byte_data(data->client, >> - BMG160_REG_RANGE, >> - BMG160_RANGE_500DPS); >> + ret = regmap_write(data->regmap, BMG160_REG_RANGE, BMG160_RANGE_500DPS); >> if (ret < 0) { >> dev_err(&data->client->dev, "Error writing reg_range\n"); >> return ret; >> } >> data->dps_range = BMG160_RANGE_500DPS; >> >> - ret = i2c_smbus_read_byte_data(data->client, BMG160_REG_SLOPE_THRES); >> + ret = regmap_read(data->regmap, BMG160_REG_SLOPE_THRES, &val); >> if (ret < 0) { >> dev_err(&data->client->dev, "Error reading reg_slope_thres\n"); >> return ret; >> } >> - data->slope_thres = ret; >> + data->slope_thres = val; >> >> /* Set default interrupt mode */ >> - ret = i2c_smbus_read_byte_data(data->client, BMG160_REG_INT_EN_1); >> - if (ret < 0) { >> - dev_err(&data->client->dev, "Error reading reg_int_en_1\n"); >> - return ret; >> - } >> - ret &= ~BMG160_INT1_BIT_OD; >> - ret = i2c_smbus_write_byte_data(data->client, >> - BMG160_REG_INT_EN_1, ret); >> + ret = regmap_update_bits(data->regmap, BMG160_REG_INT_EN_1, >> + BMG160_INT1_BIT_OD, 0); >> if (ret < 0) { >> - dev_err(&data->client->dev, "Error writing reg_int_en_1\n"); >> + dev_err(&data->client->dev, "Error updating bits in reg_int_en_1\n"); >> return ret; >> } >> >> - ret = i2c_smbus_write_byte_data(data->client, >> - BMG160_REG_INT_RST_LATCH, >> - BMG160_INT_MODE_LATCH_INT | >> - BMG160_INT_MODE_LATCH_RESET); >> + ret = regmap_write(data->regmap, BMG160_REG_INT_RST_LATCH, >> + BMG160_INT_MODE_LATCH_INT | >> + BMG160_INT_MODE_LATCH_RESET); >> if (ret < 0) { >> dev_err(&data->client->dev, >> "Error writing reg_motion_intr\n"); >> @@ -284,41 +282,28 @@ static int bmg160_setup_any_motion_interrupt(struct bmg160_data *data, >> int ret; >> >> /* Enable/Disable INT_MAP0 mapping */ >> - ret = i2c_smbus_read_byte_data(data->client, BMG160_REG_INT_MAP_0); >> - if (ret < 0) { >> - dev_err(&data->client->dev, "Error reading reg_int_map0\n"); >> - return ret; >> - } >> - if (status) >> - ret |= BMG160_INT_MAP_0_BIT_ANY; >> - else >> - ret &= ~BMG160_INT_MAP_0_BIT_ANY; >> - >> - ret = i2c_smbus_write_byte_data(data->client, >> - BMG160_REG_INT_MAP_0, >> - ret); >> + ret = regmap_update_bits(data->regmap, BMG160_REG_INT_MAP_0, >> + BMG160_INT_MAP_0_BIT_ANY, >> + (status ? BMG160_INT_MAP_0_BIT_ANY : 0)); >> if (ret < 0) { >> - dev_err(&data->client->dev, "Error writing reg_int_map0\n"); >> + dev_err(&data->client->dev, "Error updating bits reg_int_map0\n"); >> return ret; >> } >> >> /* Enable/Disable slope interrupts */ >> if (status) { >> /* Update slope thres */ >> - ret = i2c_smbus_write_byte_data(data->client, >> - BMG160_REG_SLOPE_THRES, >> - data->slope_thres); >> + ret = regmap_write(data->regmap, BMG160_REG_SLOPE_THRES, >> + data->slope_thres); >> if (ret < 0) { >> dev_err(&data->client->dev, >> "Error writing reg_slope_thres\n"); >> return ret; >> } >> >> - ret = i2c_smbus_write_byte_data(data->client, >> - BMG160_REG_MOTION_INTR, >> - BMG160_INT_MOTION_X | >> - BMG160_INT_MOTION_Y | >> - BMG160_INT_MOTION_Z); >> + ret = regmap_write(data->regmap, BMG160_REG_MOTION_INTR, >> + BMG160_INT_MOTION_X | BMG160_INT_MOTION_Y | >> + BMG160_INT_MOTION_Z); >> if (ret < 0) { >> dev_err(&data->client->dev, >> "Error writing reg_motion_intr\n"); >> @@ -331,10 +316,10 @@ static int bmg160_setup_any_motion_interrupt(struct bmg160_data *data, >> * to set latched mode, we will be flooded anyway with INTR >> */ >> if (!data->dready_trigger_on) { >> - ret = i2c_smbus_write_byte_data(data->client, >> - BMG160_REG_INT_RST_LATCH, >> - BMG160_INT_MODE_LATCH_INT | >> - BMG160_INT_MODE_LATCH_RESET); >> + ret = regmap_write(data->regmap, >> + BMG160_REG_INT_RST_LATCH, >> + BMG160_INT_MODE_LATCH_INT | >> + BMG160_INT_MODE_LATCH_RESET); >> if (ret < 0) { >> dev_err(&data->client->dev, >> "Error writing reg_rst_latch\n"); >> @@ -342,14 +327,12 @@ static int bmg160_setup_any_motion_interrupt(struct bmg160_data *data, >> } >> } >> >> - ret = i2c_smbus_write_byte_data(data->client, >> - BMG160_REG_INT_EN_0, >> - BMG160_DATA_ENABLE_INT); >> + ret = regmap_write(data->regmap, BMG160_REG_INT_EN_0, >> + BMG160_DATA_ENABLE_INT); >> >> - } else >> - ret = i2c_smbus_write_byte_data(data->client, >> - BMG160_REG_INT_EN_0, >> - 0); >> + } else { >> + ret = regmap_write(data->regmap, BMG160_REG_INT_EN_0, 0); >> + } >> >> if (ret < 0) { >> dev_err(&data->client->dev, "Error writing reg_int_en0\n"); >> @@ -365,55 +348,39 @@ static int bmg160_setup_new_data_interrupt(struct bmg160_data *data, >> int ret; >> >> /* Enable/Disable INT_MAP1 mapping */ >> - ret = i2c_smbus_read_byte_data(data->client, BMG160_REG_INT_MAP_1); >> - if (ret < 0) { >> - dev_err(&data->client->dev, "Error reading reg_int_map1\n"); >> - return ret; >> - } >> - >> - if (status) >> - ret |= BMG160_INT_MAP_1_BIT_NEW_DATA; >> - else >> - ret &= ~BMG160_INT_MAP_1_BIT_NEW_DATA; >> - >> - ret = i2c_smbus_write_byte_data(data->client, >> - BMG160_REG_INT_MAP_1, >> - ret); >> + ret = regmap_update_bits(data->regmap, BMG160_REG_INT_MAP_1, >> + BMG160_INT_MAP_1_BIT_NEW_DATA, >> + (status ? BMG160_INT_MAP_1_BIT_NEW_DATA : 0)); >> if (ret < 0) { >> - dev_err(&data->client->dev, "Error writing reg_int_map1\n"); >> + dev_err(&data->client->dev, "Error updating bits in reg_int_map1\n"); >> return ret; >> } >> >> if (status) { >> - ret = i2c_smbus_write_byte_data(data->client, >> - BMG160_REG_INT_RST_LATCH, >> - BMG160_INT_MODE_NON_LATCH_INT | >> - BMG160_INT_MODE_LATCH_RESET); >> + ret = regmap_write(data->regmap, BMG160_REG_INT_RST_LATCH, >> + BMG160_INT_MODE_NON_LATCH_INT | >> + BMG160_INT_MODE_LATCH_RESET); >> if (ret < 0) { >> dev_err(&data->client->dev, >> "Error writing reg_rst_latch\n"); >> return ret; >> } >> >> - ret = i2c_smbus_write_byte_data(data->client, >> - BMG160_REG_INT_EN_0, >> - BMG160_DATA_ENABLE_INT); >> + ret = regmap_write(data->regmap, BMG160_REG_INT_EN_0, >> + BMG160_DATA_ENABLE_INT); >> >> } else { >> /* Restore interrupt mode */ >> - ret = i2c_smbus_write_byte_data(data->client, >> - BMG160_REG_INT_RST_LATCH, >> - BMG160_INT_MODE_LATCH_INT | >> - BMG160_INT_MODE_LATCH_RESET); >> + ret = regmap_write(data->regmap, BMG160_REG_INT_RST_LATCH, >> + BMG160_INT_MODE_LATCH_INT | >> + BMG160_INT_MODE_LATCH_RESET); >> if (ret < 0) { >> dev_err(&data->client->dev, >> "Error writing reg_rst_latch\n"); >> return ret; >> } >> >> - ret = i2c_smbus_write_byte_data(data->client, >> - BMG160_REG_INT_EN_0, >> - 0); >> + ret = regmap_write(data->regmap, BMG160_REG_INT_EN_0, 0); >> } >> >> if (ret < 0) { >> @@ -444,10 +411,8 @@ static int bmg160_set_scale(struct bmg160_data *data, int val) >> >> for (i = 0; i < ARRAY_SIZE(bmg160_scale_table); ++i) { >> if (bmg160_scale_table[i].scale == val) { >> - ret = i2c_smbus_write_byte_data( >> - data->client, >> - BMG160_REG_RANGE, >> - bmg160_scale_table[i].dps_range); >> + ret = regmap_write(data->regmap, BMG160_REG_RANGE, >> + bmg160_scale_table[i].dps_range); >> if (ret < 0) { >> dev_err(&data->client->dev, >> "Error writing reg_range\n"); >> @@ -464,6 +429,7 @@ static int bmg160_set_scale(struct bmg160_data *data, int val) >> static int bmg160_get_temp(struct bmg160_data *data, int *val) >> { >> int ret; >> + unsigned int raw_val; >> >> mutex_lock(&data->mutex); >> ret = bmg160_set_power_state(data, true); >> @@ -472,7 +438,7 @@ static int bmg160_get_temp(struct bmg160_data *data, int *val) >> return ret; >> } >> >> - ret = i2c_smbus_read_byte_data(data->client, BMG160_REG_TEMP); >> + ret = regmap_read(data->regmap, BMG160_REG_TEMP, &raw_val); >> if (ret < 0) { >> dev_err(&data->client->dev, "Error reading reg_temp\n"); >> bmg160_set_power_state(data, false); >> @@ -480,7 +446,7 @@ static int bmg160_get_temp(struct bmg160_data *data, int *val) >> return ret; >> } >> >> - *val = sign_extend32(ret, 7); >> + *val = sign_extend32(raw_val, 7); >> ret = bmg160_set_power_state(data, false); >> mutex_unlock(&data->mutex); >> if (ret < 0) >> @@ -492,6 +458,7 @@ static int bmg160_get_temp(struct bmg160_data *data, int *val) >> static int bmg160_get_axis(struct bmg160_data *data, int axis, int *val) >> { >> int ret; >> + unsigned int raw_val; >> >> mutex_lock(&data->mutex); >> ret = bmg160_set_power_state(data, true); >> @@ -500,7 +467,8 @@ static int bmg160_get_axis(struct bmg160_data *data, int axis, int *val) >> return ret; >> } >> >> - ret = i2c_smbus_read_word_data(data->client, BMG160_AXIS_TO_REG(axis)); >> + ret = regmap_bulk_read(data->regmap, BMG160_AXIS_TO_REG(axis), &raw_val, >> + 2); >> if (ret < 0) { >> dev_err(&data->client->dev, "Error reading axis %d\n", axis); >> bmg160_set_power_state(data, false); >> @@ -508,7 +476,7 @@ static int bmg160_get_axis(struct bmg160_data *data, int axis, int *val) >> return ret; >> } >> >> - *val = sign_extend32(ret, 15); >> + *val = sign_extend32(raw_val, 15); >> ret = bmg160_set_power_state(data, false); >> mutex_unlock(&data->mutex); >> if (ret < 0) >> @@ -807,12 +775,13 @@ static irqreturn_t bmg160_trigger_handler(int irq, void *p) >> struct iio_dev *indio_dev = pf->indio_dev; >> struct bmg160_data *data = iio_priv(indio_dev); >> int bit, ret, i = 0; >> + unsigned int val; >> >> mutex_lock(&data->mutex); >> for_each_set_bit(bit, indio_dev->active_scan_mask, >> indio_dev->masklength) { >> - ret = i2c_smbus_read_word_data(data->client, >> - BMG160_AXIS_TO_REG(bit)); >> + ret = regmap_bulk_read(data->regmap, BMG160_AXIS_TO_REG(bit), >> + &val, 2); >> if (ret < 0) { >> mutex_unlock(&data->mutex); >> goto err; >> @@ -840,10 +809,9 @@ static int bmg160_trig_try_reen(struct iio_trigger *trig) >> return 0; >> >> /* Set latched mode interrupt and clear any latched interrupt */ >> - ret = i2c_smbus_write_byte_data(data->client, >> - BMG160_REG_INT_RST_LATCH, >> - BMG160_INT_MODE_LATCH_INT | >> - BMG160_INT_MODE_LATCH_RESET); >> + ret = regmap_write(data->regmap, BMG160_REG_INT_RST_LATCH, >> + BMG160_INT_MODE_LATCH_INT | >> + BMG160_INT_MODE_LATCH_RESET); >> if (ret < 0) { >> dev_err(&data->client->dev, "Error writing reg_rst_latch\n"); >> return ret; >> @@ -907,33 +875,34 @@ static irqreturn_t bmg160_event_handler(int irq, void *private) >> struct bmg160_data *data = iio_priv(indio_dev); >> int ret; >> int dir; >> + unsigned int val; >> >> - ret = i2c_smbus_read_byte_data(data->client, BMG160_REG_INT_STATUS_2); >> + ret = regmap_read(data->regmap, BMG160_REG_INT_STATUS_2, &val); >> if (ret < 0) { >> dev_err(&data->client->dev, "Error reading reg_int_status2\n"); >> goto ack_intr_status; >> } >> >> - if (ret & 0x08) >> + if (val & 0x08) >> dir = IIO_EV_DIR_RISING; >> else >> dir = IIO_EV_DIR_FALLING; >> >> - if (ret & BMG160_ANY_MOTION_BIT_X) >> + if (val & BMG160_ANY_MOTION_BIT_X) >> iio_push_event(indio_dev, IIO_MOD_EVENT_CODE(IIO_ANGL_VEL, >> 0, >> IIO_MOD_X, >> IIO_EV_TYPE_ROC, >> dir), >> iio_get_time_ns()); >> - if (ret & BMG160_ANY_MOTION_BIT_Y) >> + if (val & BMG160_ANY_MOTION_BIT_Y) >> iio_push_event(indio_dev, IIO_MOD_EVENT_CODE(IIO_ANGL_VEL, >> 0, >> IIO_MOD_Y, >> IIO_EV_TYPE_ROC, >> dir), >> iio_get_time_ns()); >> - if (ret & BMG160_ANY_MOTION_BIT_Z) >> + if (val & BMG160_ANY_MOTION_BIT_Z) >> iio_push_event(indio_dev, IIO_MOD_EVENT_CODE(IIO_ANGL_VEL, >> 0, >> IIO_MOD_Z, >> @@ -943,10 +912,9 @@ static irqreturn_t bmg160_event_handler(int irq, void *private) >> >> ack_intr_status: >> if (!data->dready_trigger_on) { >> - ret = i2c_smbus_write_byte_data(data->client, >> - BMG160_REG_INT_RST_LATCH, >> - BMG160_INT_MODE_LATCH_INT | >> - BMG160_INT_MODE_LATCH_RESET); >> + ret = regmap_write(data->regmap, BMG160_REG_INT_RST_LATCH, >> + BMG160_INT_MODE_LATCH_INT | >> + BMG160_INT_MODE_LATCH_RESET); >> if (ret < 0) >> dev_err(&data->client->dev, >> "Error writing reg_rst_latch\n"); >> @@ -1038,6 +1006,14 @@ static int bmg160_probe(struct i2c_client *client, >> struct iio_dev *indio_dev; >> int ret; >> const char *name = NULL; >> + struct regmap *regmap; >> + >> + regmap = devm_regmap_init_i2c(client, &bmg160_regmap_i2c_conf); >> + if (IS_ERR(regmap)) { >> + dev_err(&client->dev, "Failed to register i2c regmap %d\n", >> + (int)PTR_ERR(regmap)); >> + return PTR_ERR(regmap); >> + } >> >> indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data)); >> if (!indio_dev) > > -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/