Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752217AbbHSDic (ORCPT ); Tue, 18 Aug 2015 23:38:32 -0400 Received: from mailgw01.mediatek.com ([210.61.82.183]:42785 "EHLO mailgw01.mediatek.com" rhost-flags-OK-FAIL-OK-FAIL) by vger.kernel.org with ESMTP id S1751571AbbHSDia (ORCPT ); Tue, 18 Aug 2015 23:38:30 -0400 X-Listener-Flag: 11101 From: Leilk Liu To: Mark Brown CC: Mark Rutland , Matthias Brugger , Sascha Hauer , , , , , , Leilk Liu Subject: [PATCH 1/3] spi: mediatek: revise coding style Date: Wed, 19 Aug 2015 11:37:56 +0800 Message-ID: <1439955478-2733-2-git-send-email-leilk.liu@mediatek.com> X-Mailer: git-send-email 1.8.1.1.dirty In-Reply-To: <1439955478-2733-1-git-send-email-leilk.liu@mediatek.com> References: <1439955478-2733-1-git-send-email-leilk.liu@mediatek.com> MIME-Version: 1.0 Content-Type: text/plain X-MTK: N Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 9071 Lines: 280 This patch revises mediatek spi driver coding styles. Signed-off-by: Leilk Liu --- drivers/spi/spi-mt65xx.c | 125 ++++++++++++++++++++++++----------------------- 1 file changed, 65 insertions(+), 60 deletions(-) diff --git a/drivers/spi/spi-mt65xx.c b/drivers/spi/spi-mt65xx.c index c467ce0..814bca4 100644 --- a/drivers/spi/spi-mt65xx.c +++ b/drivers/spi/spi-mt65xx.c @@ -16,6 +16,7 @@ #include #include #include +#include #include #include #include @@ -48,15 +49,8 @@ #define SPI_CFG1_PACKET_LOOP_MASK 0xff00 #define SPI_CFG1_PACKET_LENGTH_MASK 0x3ff0000 -#define SPI_CMD_ACT_OFFSET 0 -#define SPI_CMD_RESUME_OFFSET 1 -#define SPI_CMD_CPHA_OFFSET 8 -#define SPI_CMD_CPOL_OFFSET 9 -#define SPI_CMD_TXMSBF_OFFSET 12 -#define SPI_CMD_RXMSBF_OFFSET 13 -#define SPI_CMD_RX_ENDIAN_OFFSET 14 -#define SPI_CMD_TX_ENDIAN_OFFSET 15 - +#define SPI_CMD_ACT BIT(0) +#define SPI_CMD_RESUME BIT(1) #define SPI_CMD_RST BIT(2) #define SPI_CMD_PAUSE_EN BIT(4) #define SPI_CMD_DEASSERT BIT(5) @@ -71,12 +65,10 @@ #define SPI_CMD_FINISH_IE BIT(16) #define SPI_CMD_PAUSE_IE BIT(17) -#define MTK_SPI_QUIRK_PAD_SELECT 1 -/* Must explicitly send dummy Tx bytes to do Rx only transfer */ -#define MTK_SPI_QUIRK_MUST_TX 1 - #define MT8173_SPI_MAX_PAD_SEL 3 +#define MTK_SPI_PAUSE_INT_STATUS 0x2 + #define MTK_SPI_IDLE 0 #define MTK_SPI_PAUSED 1 @@ -84,8 +76,9 @@ #define MTK_SPI_PACKET_SIZE 1024 struct mtk_spi_compatible { - u32 need_pad_sel; - u32 must_tx; + bool need_pad_sel; + /* Must explicitly send dummy Tx bytes to do Rx only transfer */ + bool must_tx; }; struct mtk_spi { @@ -100,19 +93,11 @@ struct mtk_spi { const struct mtk_spi_compatible *dev_comp; }; -static const struct mtk_spi_compatible mt6589_compat = { - .need_pad_sel = 0, - .must_tx = 0, -}; - -static const struct mtk_spi_compatible mt8135_compat = { - .need_pad_sel = 0, - .must_tx = 0, -}; - +static const struct mtk_spi_compatible mt6589_compat; +static const struct mtk_spi_compatible mt8135_compat; static const struct mtk_spi_compatible mt8173_compat = { - .need_pad_sel = MTK_SPI_QUIRK_PAD_SELECT, - .must_tx = MTK_SPI_QUIRK_MUST_TX, + .need_pad_sel = true, + .must_tx = true, }; /* @@ -156,14 +141,24 @@ static void mtk_spi_config(struct mtk_spi *mdata, reg_val = readl(mdata->base + SPI_CMD_REG); /* set the mlsbx and mlsbtx */ - reg_val &= ~(SPI_CMD_TXMSBF | SPI_CMD_RXMSBF); - reg_val |= (chip_config->tx_mlsb << SPI_CMD_TXMSBF_OFFSET); - reg_val |= (chip_config->rx_mlsb << SPI_CMD_RXMSBF_OFFSET); + if (chip_config->tx_mlsb) + reg_val |= SPI_CMD_TXMSBF; + else + reg_val &= ~SPI_CMD_TXMSBF; + if (chip_config->rx_mlsb) + reg_val |= SPI_CMD_RXMSBF; + else + reg_val &= ~SPI_CMD_RXMSBF; /* set the tx/rx endian */ - reg_val &= ~(SPI_CMD_TX_ENDIAN | SPI_CMD_RX_ENDIAN); - reg_val |= (chip_config->tx_endian << SPI_CMD_TX_ENDIAN_OFFSET); - reg_val |= (chip_config->rx_endian << SPI_CMD_RX_ENDIAN_OFFSET); + if (chip_config->tx_endian) + reg_val |= SPI_CMD_TX_ENDIAN; + else + reg_val &= ~SPI_CMD_TX_ENDIAN; + if (chip_config->rx_endian) + reg_val |= SPI_CMD_RX_ENDIAN; + else + reg_val &= ~SPI_CMD_RX_ENDIAN; /* set finish and pause interrupt always enable */ reg_val |= SPI_CMD_FINISH_IE | SPI_CMD_PAUSE_EN; @@ -196,7 +191,7 @@ static int mtk_spi_prepare_hardware(struct spi_master *master) trans = list_first_entry(&msg->transfers, struct spi_transfer, transfer_list); - if (trans->cs_change == 0) { + if (!trans->cs_change) { mdata->state = MTK_SPI_IDLE; mtk_spi_reset(mdata); } @@ -226,9 +221,14 @@ static int mtk_spi_prepare_message(struct spi_master *master, cpol = spi->mode & SPI_CPOL ? 1 : 0; reg_val = readl(mdata->base + SPI_CMD_REG); - reg_val &= ~(SPI_CMD_CPHA | SPI_CMD_CPOL); - reg_val |= (cpha << SPI_CMD_CPHA_OFFSET); - reg_val |= (cpol << SPI_CMD_CPOL_OFFSET); + if (cpha) + reg_val |= SPI_CMD_CPHA; + else + reg_val &= ~SPI_CMD_CPHA; + if (cpol) + reg_val |= SPI_CMD_CPOL; + else + reg_val &= ~SPI_CMD_CPOL; writel(reg_val, mdata->base + SPI_CMD_REG); chip_config = spi->controller_data; @@ -257,8 +257,7 @@ static void mtk_spi_set_cs(struct spi_device *spi, bool enable) static void mtk_spi_prepare_transfer(struct spi_master *master, struct spi_transfer *xfer) { - u32 spi_clk_hz, div, high_time, low_time, holdtime, - setuptime, cs_idletime, reg_val = 0; + u32 spi_clk_hz, div, sck_time, cs_time, reg_val = 0; struct mtk_spi *mdata = spi_master_get_devdata(master); spi_clk_hz = clk_get_rate(mdata->spi_clk); @@ -267,21 +266,18 @@ static void mtk_spi_prepare_transfer(struct spi_master *master, else div = 1; - high_time = (div + 1) / 2; - low_time = (div + 1) / 2; - holdtime = (div + 1) / 2 * 2; - setuptime = (div + 1) / 2 * 2; - cs_idletime = (div + 1) / 2 * 2; + sck_time = (div + 1) / 2; + cs_time = sck_time * 2; - reg_val |= (((high_time - 1) & 0xff) << SPI_CFG0_SCK_HIGH_OFFSET); - reg_val |= (((low_time - 1) & 0xff) << SPI_CFG0_SCK_LOW_OFFSET); - reg_val |= (((holdtime - 1) & 0xff) << SPI_CFG0_CS_HOLD_OFFSET); - reg_val |= (((setuptime - 1) & 0xff) << SPI_CFG0_CS_SETUP_OFFSET); + reg_val |= (((sck_time - 1) & 0xff) << SPI_CFG0_SCK_HIGH_OFFSET); + reg_val |= (((sck_time - 1) & 0xff) << SPI_CFG0_SCK_LOW_OFFSET); + reg_val |= (((cs_time - 1) & 0xff) << SPI_CFG0_CS_HOLD_OFFSET); + reg_val |= (((cs_time - 1) & 0xff) << SPI_CFG0_CS_SETUP_OFFSET); writel(reg_val, mdata->base + SPI_CFG0_REG); reg_val = readl(mdata->base + SPI_CFG1_REG); reg_val &= ~SPI_CFG1_CS_IDLE_MASK; - reg_val |= (((cs_idletime - 1) & 0xff) << SPI_CFG1_CS_IDLE_OFFSET); + reg_val |= (((cs_time - 1) & 0xff) << SPI_CFG1_CS_IDLE_OFFSET); writel(reg_val, mdata->base + SPI_CFG1_REG); } @@ -290,11 +286,11 @@ static void mtk_spi_setup_packet(struct spi_master *master) u32 packet_size, packet_loop, reg_val; struct mtk_spi *mdata = spi_master_get_devdata(master); - packet_size = min_t(unsigned, mdata->xfer_len, MTK_SPI_PACKET_SIZE); + packet_size = min_t(u32, mdata->xfer_len, MTK_SPI_PACKET_SIZE); packet_loop = mdata->xfer_len / packet_size; reg_val = readl(mdata->base + SPI_CFG1_REG); - reg_val &= ~(SPI_CFG1_PACKET_LENGTH_MASK + SPI_CFG1_PACKET_LOOP_MASK); + reg_val &= ~(SPI_CFG1_PACKET_LENGTH_MASK | SPI_CFG1_PACKET_LOOP_MASK); reg_val |= (packet_size - 1) << SPI_CFG1_PACKET_LENGTH_OFFSET; reg_val |= (packet_loop - 1) << SPI_CFG1_PACKET_LOOP_OFFSET; writel(reg_val, mdata->base + SPI_CFG1_REG); @@ -302,20 +298,20 @@ static void mtk_spi_setup_packet(struct spi_master *master) static void mtk_spi_enable_transfer(struct spi_master *master) { - int cmd; + u32 cmd; struct mtk_spi *mdata = spi_master_get_devdata(master); cmd = readl(mdata->base + SPI_CMD_REG); if (mdata->state == MTK_SPI_IDLE) - cmd |= 1 << SPI_CMD_ACT_OFFSET; + cmd |= SPI_CMD_ACT; else - cmd |= 1 << SPI_CMD_RESUME_OFFSET; + cmd |= SPI_CMD_RESUME; writel(cmd, mdata->base + SPI_CMD_REG); } -static int mtk_spi_get_mult_delta(int xfer_len) +static int mtk_spi_get_mult_delta(u32 xfer_len) { - int mult_delta; + u32 mult_delta; if (xfer_len > MTK_SPI_PACKET_SIZE) mult_delta = xfer_len % MTK_SPI_PACKET_SIZE; @@ -459,7 +455,7 @@ static irqreturn_t mtk_spi_interrupt(int irq, void *dev_id) struct spi_transfer *trans = mdata->cur_transfer; reg_val = readl(mdata->base + SPI_STATUS0_REG); - if (reg_val & 0x2) + if (reg_val & MTK_SPI_PAUSE_INT_STATUS) mdata->state = MTK_SPI_PAUSED; else mdata->state = MTK_SPI_IDLE; @@ -527,7 +523,7 @@ static int mtk_spi_probe(struct platform_device *pdev) struct mtk_spi *mdata; const struct of_device_id *of_id; struct resource *res; - int irq, ret; + int irq, ret; master = spi_alloc_master(&pdev->dev, sizeof(*mdata)); if (!master) { @@ -693,8 +689,10 @@ static int mtk_spi_resume(struct device *dev) if (!pm_runtime_suspended(dev)) { ret = clk_prepare_enable(mdata->spi_clk); - if (ret < 0) + if (ret < 0) { + dev_err(dev, "failed to enable spi_clk (%d)\n", ret); return ret; + } } ret = spi_master_resume(master); @@ -720,8 +718,15 @@ static int mtk_spi_runtime_resume(struct device *dev) { struct spi_master *master = dev_get_drvdata(dev); struct mtk_spi *mdata = spi_master_get_devdata(master); + int ret; - return clk_prepare_enable(mdata->spi_clk); + ret = clk_prepare_enable(mdata->spi_clk); + if (ret < 0) { + dev_err(dev, "failed to enable spi_clk (%d)\n", ret); + return ret; + } + + return 0; } #endif /* CONFIG_PM */ -- 1.8.1.1.dirty -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/