Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S932272AbbHSOuy (ORCPT ); Wed, 19 Aug 2015 10:50:54 -0400 Received: from regular1.263xmail.com ([211.150.99.139]:33798 "EHLO regular1.263xmail.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S932225AbbHSOur (ORCPT ); Wed, 19 Aug 2015 10:50:47 -0400 X-263anti-spam: KSV:0; X-MAIL-GRAY: 0 X-MAIL-DELIVERY: 1 X-KSVirus-check: 0 X-ABS-CHECKED: 4 X-ADDR-CHECKED: 0 X-RL-SENDER: ykk@rock-chips.com X-FST-TO: heiko@sntech.de X-SENDER-IP: 58.22.7.114 X-LOGIN-NAME: ykk@rock-chips.com X-UNIQUE-TAG: X-ATTACHMENT-NUM: 0 X-DNS-TYPE: 0 From: Yakir Yang To: Heiko Stuebner , Thierry Reding , Jingoo Han , Fabio Estevam , Inki Dae , joe@perches.com, Russell King Cc: djkurtz@google.com, dianders@google.com, seanpaul@google.com, Takashi Iwai , ajaynumb@gmail.com, Andrzej Hajda , Kyungmin Park , Philipp Zabel , David Airlie , Gustavo Padovan , Vincent Palatin , Mark Yao , Andy Yan , Kumar Gala , Ian Campbell , Rob Herring , Pawel Moll , Kishon Vijay Abraham I , dri-devel@lists.freedesktop.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-samsung-soc@vger.kernel.org, linux-rockchip@lists.infradead.org, linux-arm-kernel@lists.infradead.org, Yakir Yang Subject: [PATCH v3 06/14] Documentation: drm/bridge: add document for analogix_dp Date: Wed, 19 Aug 2015 09:50:34 -0500 Message-Id: <1439995834-18363-1-git-send-email-ykk@rock-chips.com> X-Mailer: git-send-email 1.9.1 In-Reply-To: <1439995728-18046-1-git-send-email-ykk@rock-chips.com> References: <1439995728-18046-1-git-send-email-ykk@rock-chips.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 11660 Lines: 346 Analogix dp driver is split from exynos dp driver, so we just make an copy of exynos_dp.txt, and then simplify exynos_dp.txt Beside update some exynos dtsi file with the latest change according to the devicetree binding documents. Signed-off-by: Yakir Yang --- Changes in v3: - Take Heiko suggest, add devicetree binding documents. - Take Thierry Reding suggest, remove sync pol & colorimetry properies from the new analogix dp driver devicetree binding. - Update the exist exynos dtsi file with the latest DP DT properies. Changes in v2: None .../devicetree/bindings/drm/bridge/analogix_dp.txt | 70 ++++++++++++++++++++++ .../devicetree/bindings/video/exynos_dp.txt | 50 ++++++---------- arch/arm/boot/dts/exynos5250-arndale.dts | 10 ++-- arch/arm/boot/dts/exynos5250-smdk5250.dts | 10 ++-- arch/arm/boot/dts/exynos5250-snow.dts | 12 ++-- arch/arm/boot/dts/exynos5250-spring.dts | 12 ++-- arch/arm/boot/dts/exynos5420-peach-pit.dts | 12 ++-- arch/arm/boot/dts/exynos5420-smdk5420.dts | 10 ++-- arch/arm/boot/dts/exynos5800-peach-pi.dts | 12 ++-- 9 files changed, 119 insertions(+), 79 deletions(-) create mode 100644 Documentation/devicetree/bindings/drm/bridge/analogix_dp.txt diff --git a/Documentation/devicetree/bindings/drm/bridge/analogix_dp.txt b/Documentation/devicetree/bindings/drm/bridge/analogix_dp.txt new file mode 100644 index 0000000..6127018 --- /dev/null +++ b/Documentation/devicetree/bindings/drm/bridge/analogix_dp.txt @@ -0,0 +1,70 @@ +Analogix Display Port bridge bindings + +Required properties for dp-controller: + -compatible: + platform specific such as: + * "samsung,exynos5-dp" + * "rockchip,rk3288-dp" + -reg: + physical base address of the controller and length + of memory mapped region. + -interrupts: + interrupt combiner values. + -clocks: + from common clock binding: handle to dp clock. + -clock-names: + from common clock binding: Shall be "dp". + -interrupt-parent: + phandle to Interrupt combiner node. + -phys: + from general PHY binding: the phandle for the PHY device. + -phy-names: + from general PHY binding: Should be "dp". + -analogix,color-space: + input video data format. + COLOR_RGB = 0, COLOR_YCBCR422 = 1, COLOR_YCBCR444 = 2 + -analogix,color-depth: + number of bits per colour component. + COLOR_6 = 0, COLOR_8 = 1, COLOR_10 = 2, COLOR_12 = 3 + -analogix,link-rate: + max link rate supported by the eDP controller. + LINK_RATE_1_62GBPS = 0x6, LINK_RATE_2_70GBPS = 0x0A, + LINK_RATE_5_40GBPS = 0x14 + -analogix,lane-count: + max number of lanes supported by the eDP contoller. + LANE_COUNT1 = 1, LANE_COUNT2 = 2, LANE_COUNT4 = 4 + -port@[X]: SoC specific port nodes with endpoint definitions as defined + in Documentation/devicetree/bindings/media/video-interfaces.txt, + please refer to the SoC specific binding document: + * Documentation/devicetree/bindings/video/exynos_dp.txt + * Documentation/devicetree/bindings/video/analogix_dp-rockchip.txt + +Optional properties for dp-controller: + -analogix,hpd-gpio: + Hotplug detect GPIO. + Indicates which GPIO should be used for hotplug + detection + -video interfaces: Device node can contain video interface port + nodes according to [1]. + +[1]: Documentation/devicetree/bindings/media/video-interfaces.txt +------------------------------------------------------------------------------- + +Example: + + dp-controller { + compatible = "samsung,exynos5-dp"; + reg = <0x145b0000 0x10000>; + interrupts = <10 3>; + interrupt-parent = <&combiner>; + clocks = <&clock 342>; + clock-names = "dp"; + + phys = <&dp_phy>; + phy-names = "dp"; + + analogix,color-space = <0>; + analogix,color-depth = <1>; + analogix,link-rate = <0x0a>; + analogix,lane-count = <4>; + }; diff --git a/Documentation/devicetree/bindings/video/exynos_dp.txt b/Documentation/devicetree/bindings/video/exynos_dp.txt index 7a3a9cd..177506f 100644 --- a/Documentation/devicetree/bindings/video/exynos_dp.txt +++ b/Documentation/devicetree/bindings/video/exynos_dp.txt @@ -31,28 +31,10 @@ Required properties for dp-controller: from general PHY binding: the phandle for the PHY device. -phy-names: from general PHY binding: Should be "dp". - -samsung,color-space: - input video data format. - COLOR_RGB = 0, COLOR_YCBCR422 = 1, COLOR_YCBCR444 = 2 - -samsung,dynamic-range: - dynamic range for input video data. - VESA = 0, CEA = 1 - -samsung,ycbcr-coeff: - YCbCr co-efficients for input video. - COLOR_YCBCR601 = 0, COLOR_YCBCR709 = 1 - -samsung,color-depth: - number of bits per colour component. - COLOR_6 = 0, COLOR_8 = 1, COLOR_10 = 2, COLOR_12 = 3 - -samsung,link-rate: - link rate supported by the panel. - LINK_RATE_1_62GBPS = 0x6, LINK_RATE_2_70GBPS = 0x0A - -samsung,lane-count: - number of lanes supported by the panel. - LANE_COUNT1 = 1, LANE_COUNT2 = 2, LANE_COUNT4 = 4 - - display-timings: timings for the connected panel as described by - Documentation/devicetree/bindings/video/display-timing.txt Optional properties for dp-controller: + - display-timings: timings for the connected panel as described by + Documentation/devicetree/bindings/video/display-timing.txt -interlaced: interlace scan mode. Progressive if defined, Interlaced if not defined @@ -62,14 +44,18 @@ Optional properties for dp-controller: -hsync-active-high: HSYNC polarity configuration. High if defined, Low if not defined - -samsung,hpd-gpio: - Hotplug detect GPIO. - Indicates which GPIO should be used for hotplug - detection - -video interfaces: Device node can contain video interface port - nodes according to [1]. -[1]: Documentation/devicetree/bindings/media/video-interfaces.txt +For the below properties, please refer to Analogix DP binding document: + * Documentation/devicetree/bindings/drm/bridge/analogix_dp.txt + -phys (required) + -phy-names (required) + -analogix,color-space (required) + -analogix,color-depth (required) + -analogix,link-rate (required) + -analogix,lane-count (required) + -analogix,hpd-gpio (optional) + -video interfaces (optional) +------------------------------------------------------------------------------- Example: @@ -88,12 +74,10 @@ SOC specific portion: Board Specific portion: dp-controller { - samsung,color-space = <0>; - samsung,dynamic-range = <0>; - samsung,ycbcr-coeff = <0>; - samsung,color-depth = <1>; - samsung,link-rate = <0x0a>; - samsung,lane-count = <4>; + analogix,color-space = <0>; + analogix,color-depth = <1>; + analogix,link-rate = <0x0a>; + analogix,lane-count = <4>; display-timings { native-mode = <&lcd_timing>; diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts index 7e728a1..e48798d 100644 --- a/arch/arm/boot/dts/exynos5250-arndale.dts +++ b/arch/arm/boot/dts/exynos5250-arndale.dts @@ -119,12 +119,10 @@ &dp { status = "okay"; - samsung,color-space = <0>; - samsung,dynamic-range = <0>; - samsung,ycbcr-coeff = <0>; - samsung,color-depth = <1>; - samsung,link-rate = <0x0a>; - samsung,lane-count = <4>; + analogix,color-space = <0>; + analogix,color-depth = <1>; + analogix,link-rate = <0x0a>; + analogix,lane-count = <4>; }; &fimd { diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts index 4fe186d..b8c6b8b 100644 --- a/arch/arm/boot/dts/exynos5250-smdk5250.dts +++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts @@ -75,12 +75,10 @@ }; &dp { - samsung,color-space = <0>; - samsung,dynamic-range = <0>; - samsung,ycbcr-coeff = <0>; - samsung,color-depth = <1>; - samsung,link-rate = <0x0a>; - samsung,lane-count = <4>; + analogix,color-space = <0>; + analogix,color-depth = <1>; + analogix,link-rate = <0x0a>; + analogix,lane-count = <4>; pinctrl-names = "default"; pinctrl-0 = <&dp_hpd>; diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts index b7f4122..9ce2b89 100644 --- a/arch/arm/boot/dts/exynos5250-snow.dts +++ b/arch/arm/boot/dts/exynos5250-snow.dts @@ -239,13 +239,11 @@ status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&dp_hpd>; - samsung,color-space = <0>; - samsung,dynamic-range = <0>; - samsung,ycbcr-coeff = <0>; - samsung,color-depth = <1>; - samsung,link-rate = <0x0a>; - samsung,lane-count = <2>; - samsung,hpd-gpio = <&gpx0 7 GPIO_ACTIVE_HIGH>; + analogix,color-space = <0>; + analogix,color-depth = <1>; + analogix,link-rate = <0x0a>; + analogix,lane-count = <2>; + analogix,hpd-gpio = <&gpx0 7 GPIO_ACTIVE_HIGH>; ports { port@0 { diff --git a/arch/arm/boot/dts/exynos5250-spring.dts b/arch/arm/boot/dts/exynos5250-spring.dts index d03f9b8..9288ae6 100644 --- a/arch/arm/boot/dts/exynos5250-spring.dts +++ b/arch/arm/boot/dts/exynos5250-spring.dts @@ -69,13 +69,11 @@ status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&dp_hpd_gpio>; - samsung,color-space = <0>; - samsung,dynamic-range = <0>; - samsung,ycbcr-coeff = <0>; - samsung,color-depth = <1>; - samsung,link-rate = <0x0a>; - samsung,lane-count = <1>; - samsung,hpd-gpio = <&gpc3 0 GPIO_ACTIVE_HIGH>; + analogix,color-space = <0>; + analogix,color-depth = <1>; + analogix,link-rate = <0x0a>; + analogix,lane-count = <1>; + analogix,hpd-gpio = <&gpc3 0 GPIO_ACTIVE_HIGH>; }; &ehci { diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts index 8f4d76c..695a380 100644 --- a/arch/arm/boot/dts/exynos5420-peach-pit.dts +++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts @@ -147,13 +147,11 @@ status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&dp_hpd_gpio>; - samsung,color-space = <0>; - samsung,dynamic-range = <0>; - samsung,ycbcr-coeff = <0>; - samsung,color-depth = <1>; - samsung,link-rate = <0x06>; - samsung,lane-count = <2>; - samsung,hpd-gpio = <&gpx2 6 0>; + analogix,color-space = <0>; + analogix,color-depth = <1>; + analogix,link-rate = <0x06>; + analogix,lane-count = <2>; + analogix,hpd-gpio = <&gpx2 6 0>; ports { port@0 { diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts b/arch/arm/boot/dts/exynos5420-smdk5420.dts index 98871f9..fd46714 100644 --- a/arch/arm/boot/dts/exynos5420-smdk5420.dts +++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts @@ -91,12 +91,10 @@ &dp { pinctrl-names = "default"; pinctrl-0 = <&dp_hpd>; - samsung,color-space = <0>; - samsung,dynamic-range = <0>; - samsung,ycbcr-coeff = <0>; - samsung,color-depth = <1>; - samsung,link-rate = <0x0a>; - samsung,lane-count = <4>; + analogix,color-space = <0>; + analogix,color-depth = <1>; + analogix,link-rate = <0x0a>; + analogix,lane-count = <4>; status = "okay"; }; diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts index 7d5b386..54b4c63 100644 --- a/arch/arm/boot/dts/exynos5800-peach-pi.dts +++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts @@ -141,13 +141,11 @@ status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&dp_hpd_gpio>; - samsung,color-space = <0>; - samsung,dynamic-range = <0>; - samsung,ycbcr-coeff = <0>; - samsung,color-depth = <1>; - samsung,link-rate = <0x0a>; - samsung,lane-count = <2>; - samsung,hpd-gpio = <&gpx2 6 0>; + analogix,color-space = <0>; + analogix,color-depth = <1>; + analogix,link-rate = <0x0a>; + analogix,lane-count = <2>; + analogix,hpd-gpio = <&gpx2 6 0>; panel = <&panel>; }; -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/