Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753240AbbHUII7 (ORCPT ); Fri, 21 Aug 2015 04:08:59 -0400 Received: from mail-bl2on0138.outbound.protection.outlook.com ([65.55.169.138]:21314 "EHLO na01-bl2-obe.outbound.protection.outlook.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1751895AbbHUIIw convert rfc822-to-8bit (ORCPT ); Fri, 21 Aug 2015 04:08:52 -0400 From: Chen Bough To: Dmitry Torokhov CC: "robh+dt@kernel.org" , "pawel.moll@arm.com" , "mark.rutland@arm.com" , "ijc+devicetree@hellion.org.uk" , "galak@codeaurora.org" , "shawnguo@kernel.org" , "kernel@pengutronix.de" , "linux@arm.linux.org.uk" , "hans.verkuil@cisco.com" , "hadess@hadess.net" , "mchehab@osg.samsung.com" , "mamlinav@gmail.com" , "arnd@arndb.de" , "jonathar@broadcom.com" , "hdegoede@redhat.com" , "christian.gmeiner@gmail.com" , "scott.liu@emc.com.tw" , "geert@linux-m68k.org" , "benjamin.tissoires@redhat.com" , "sebastien.szymanski@armadeus.com" , "sbranden@broadcom.com" , "devicetree@vger.kernel.org" , "linux-kernel@vger.kernel.org" , "linux-arm-kernel@lists.infradead.org" , "linux-input@vger.kernel.org" Subject: RE: [PATCH v2 1/5] input: touchscreen: add imx6ul_tsc driver support Thread-Topic: [PATCH v2 1/5] input: touchscreen: add imx6ul_tsc driver support Thread-Index: AQHQyRuc679dKJYhYkCKKIbEkMkYN54S6M2AgANOzxA= Date: Fri, 21 Aug 2015 08:08:46 +0000 Message-ID: References: <1438077521-12857-1-git-send-email-haibo.chen@freescale.com> <1438077521-12857-2-git-send-email-haibo.chen@freescale.com> <20150819051131.GA12545@dtor-pixel> In-Reply-To: <20150819051131.GA12545@dtor-pixel> Accept-Language: zh-CN, en-US Content-Language: en-US X-MS-Has-Attach: X-MS-TNEF-Correlator: authentication-results: spf=none (sender IP is ) smtp.mailfrom=Haibo.Chen@freescale.com; x-originating-ip: [192.158.241.86] x-microsoft-exchange-diagnostics: 1;BY1PR03MB1387;5:mC/QUgTjlRWy/ugpJOv/iqSz5Fg+MpF8Axoj3FV2jBZ7594zy+k64/Beh8CkgjVdtNa8uPB61aQivzFzgH9TJEvpRHrTyah9Mnnk+xWGAuLYUJ1Nq2kGJ+ina1aDTkmTpgIjufZW1TUoO1c56LMPGA==;24:uy98MLtEDNNW/31t/TsFGnjS6jIGQtNWOiDIO3jL9/RX40H6qNmrx3GrD9wMMpRnfRVsna3Y3YVhXcIJsNM4zstEv63f6eyaVst0CkdzisM=;20:ASmPrHtz5vcW3LjnK6LP9bByrhh6gLHiDLglfwXiH4iohKkrypV2rgF1aJaLNDjKErJwtOez33kMpG6svfIRHQ== x-microsoft-antispam: UriScan:;BCL:0;PCL:0;RULEID:;SRVR:BY1PR03MB1387; x-microsoft-antispam-prvs: x-exchange-antispam-report-test: UriScan:; x-exchange-antispam-report-cfa-test: BCL:0;PCL:0;RULEID:(601004)(5005006)(8121501046)(3002001);SRVR:BY1PR03MB1387;BCL:0;PCL:0;RULEID:;SRVR:BY1PR03MB1387; x-forefront-prvs: 067553F396 x-forefront-antispam-report: SFV:NSPM;SFS:(10019020)(6009001)(13464003)(377454003)(189002)(43784003)(24454002)(199003)(50986999)(66066001)(2900100001)(110136002)(5001830100001)(10400500002)(575784001)(5001860100001)(74316001)(97736004)(101416001)(5890100001)(122556002)(5004730100002)(87936001)(77156002)(46102003)(33656002)(2656002)(5003600100002)(76576001)(99286002)(86362001)(2950100001)(68736005)(19580395003)(54356999)(76176999)(102836002)(4001540100001)(40100003)(189998001)(64706001)(5001960100002)(106356001)(92566002)(77096005)(62966003)(106116001)(81156007)(105586002)(5007970100001)(19580405001)(5002640100001)(7059030)(2004002)(569005);DIR:OUT;SFP:1102;SCL:1;SRVR:BY1PR03MB1387;H:BY1PR03MB1388.namprd03.prod.outlook.com;FPR:;SPF:None;PTR:InfoNoRecords;MX:1;A:1;LANG:en; spamdiagnosticoutput: 1:23 spamdiagnosticmetadata: NSPM Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 8BIT MIME-Version: 1.0 X-OriginatorOrg: freescale.com X-MS-Exchange-CrossTenant-originalarrivaltime: 21 Aug 2015 08:08:46.6799 (UTC) X-MS-Exchange-CrossTenant-fromentityheader: Hosted X-MS-Exchange-CrossTenant-id: 710a03f5-10f6-4d38-9ff4-a80b81da590d X-MS-Exchange-Transport-CrossTenantHeadersStamped: BY1PR03MB1387 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 35319 Lines: 1151 Hi Dmitry, Thanks for your patient review, especially for the patch you attached. I test your patch these days, with below change, touch can work normally. (also change the xnur to active low in dts) In probe function: > - tsc->xnur_gpio = of_get_named_gpio(np, "xnur-gpio", 0); > - err = gpio_request_one(tsc->xnur_gpio, GPIOF_IN, "tsc_X-"); > - if (err) { > - dev_err(&pdev->dev, "failed to request GPIO tsc_X-\n"); > + input_set_drvdata(input_dev, tsc); > + > + tsc->dev = &pdev->dev; > + tsc->input = input_dev; > + init_completion(&tsc->completion); > + > + tsc->xnur_gpio = devm_gpiod_get(&pdev->dev, "xnur-gpio", GPIOD_IN); Here, we need to change "xnur-gpio" to "xnur", otherwise the gpio request will be failed. This is because gpiod common code already add suffix '-gpio' or 'gpios'. For others, your patch seems normal and rational. I will add your patch and send patch-V3. Thanks again! Best Regards Haibo Chen > -----Original Message----- > From: Dmitry Torokhov [mailto:dmitry.torokhov@gmail.com] > Sent: Wednesday, August 19, 2015 1:12 PM > To: Chen Haibo-B51421 > Cc: robh+dt@kernel.org; pawel.moll@arm.com; mark.rutland@arm.com; > ijc+devicetree@hellion.org.uk; galak@codeaurora.org; shawnguo@kernel.org; > kernel@pengutronix.de; linux@arm.linux.org.uk; hans.verkuil@cisco.com; > hadess@hadess.net; mchehab@osg.samsung.com; mamlinav@gmail.com; > arnd@arndb.de; jonathar@broadcom.com; hdegoede@redhat.com; > christian.gmeiner@gmail.com; scott.liu@emc.com.tw; geert@linux-m68k.org; > benjamin.tissoires@redhat.com; sebastien.szymanski@armadeus.com; > sbranden@broadcom.com; devicetree@vger.kernel.org; linux- > kernel@vger.kernel.org; linux-arm-kernel@lists.infradead.org; linux- > input@vger.kernel.org > Subject: Re: [PATCH v2 1/5] input: touchscreen: add imx6ul_tsc driver > support > > Hi Haibo, > > On Tue, Jul 28, 2015 at 05:58:37PM +0800, Haibo Chen wrote: > > Freescale i.MX6UL contains a internal touchscreen controller, this > > patch add a driver to support this controller. > > > > This looks pretty reasonable; just a few comments below. > > > Signed-off-by: Haibo Chen > > --- > > drivers/input/touchscreen/Kconfig | 12 + > > drivers/input/touchscreen/Makefile | 1 + > > drivers/input/touchscreen/imx6ul_tsc.c | 504 > > +++++++++++++++++++++++++++++++++ > > 3 files changed, 517 insertions(+) > > create mode 100644 drivers/input/touchscreen/imx6ul_tsc.c > > > > diff --git a/drivers/input/touchscreen/Kconfig > > b/drivers/input/touchscreen/Kconfig > > index 5b272ba..32c300d 100644 > > --- a/drivers/input/touchscreen/Kconfig > > +++ b/drivers/input/touchscreen/Kconfig > > @@ -479,6 +479,18 @@ config TOUCHSCREEN_MTOUCH > > To compile this driver as a module, choose M here: the > > module will be called mtouch. > > > > +config TOUCHSCREEN_IMX6UL_TSC > > + tristate "Freescale i.MX6UL touchscreen controller" > > + depends on OF > > + help > > + Say Y here if you have a Freescale i.MX6UL, and want to > > + use the internal touchscreen controller. > > + > > + If unsure, say N. > > + > > + To compile this driver as a module, choose M here: the > > + moduel will be called imx6ul_tsc. > > + > > config TOUCHSCREEN_INEXIO > > tristate "iNexio serial touchscreens" > > select SERIO > > diff --git a/drivers/input/touchscreen/Makefile > > b/drivers/input/touchscreen/Makefile > > index c85aae2..9379b32 100644 > > --- a/drivers/input/touchscreen/Makefile > > +++ b/drivers/input/touchscreen/Makefile > > @@ -38,6 +38,7 @@ obj-$(CONFIG_TOUCHSCREEN_EGALAX) += egalax_ts.o > > obj-$(CONFIG_TOUCHSCREEN_FUJITSU) += fujitsu_ts.o > > obj-$(CONFIG_TOUCHSCREEN_GOODIX) += goodix.o > > obj-$(CONFIG_TOUCHSCREEN_ILI210X) += ili210x.o > > +obj-$(CONFIG_TOUCHSCREEN_IMX6UL_TSC) += imx6ul_tsc.o > > obj-$(CONFIG_TOUCHSCREEN_INEXIO) += inexio.o > > obj-$(CONFIG_TOUCHSCREEN_INTEL_MID) += intel-mid-touch.o > > obj-$(CONFIG_TOUCHSCREEN_IPROC) += bcm_iproc_tsc.o > > diff --git a/drivers/input/touchscreen/imx6ul_tsc.c > > b/drivers/input/touchscreen/imx6ul_tsc.c > > new file mode 100644 > > index 0000000..807f1db > > --- /dev/null > > +++ b/drivers/input/touchscreen/imx6ul_tsc.c > > @@ -0,0 +1,504 @@ > > +/* > > + * Freescale i.MX6UL touchscreen controller driver > > + * > > + * Copyright (C) 2015 Freescale Semiconductor, Inc. > > + * > > + * This program is free software; you can redistribute it and/or > > +modify > > + * it under the terms of the GNU General Public License version 2 as > > + * published by the Free Software Foundation. > > + */ > > + > > +#include > > +#include > > +#include > > +#include > > +#include > > +#include > > +#include > > +#include > > +#include > > +#include > > +#include > > +#include > > I do not think you need of_irq and of_device. > > > +#include > > +#include > > +#include > > +#include > > + > > +/* ADC configuration registers field define */ > > +#define ADC_AIEN (0x1 << 7) > > +#define ADC_CONV_DISABLE 0x1F > > +#define ADC_CAL (0x1 << 7) > > +#define ADC_CALF 0x2 > > +#define ADC_12BIT_MODE (0x2 << 2) > > +#define ADC_IPG_CLK 0x00 > > +#define ADC_CLK_DIV_8 (0x03 << 5) > > +#define ADC_SHORT_SAMPLE_MODE (0x0 << 4) > > +#define ADC_HARDWARE_TRIGGER (0x1 << 13) > > +#define SELECT_CHANNEL_4 0x04 > > +#define SELECT_CHANNEL_1 0x01 > > +#define DISABLE_CONVERSION_INT (0x0 << 7) > > + > > +/* ADC registers */ > > +#define REG_ADC_HC0 0x00 > > +#define REG_ADC_HC1 0x04 > > +#define REG_ADC_HC2 0x08 > > +#define REG_ADC_HC3 0x0C > > +#define REG_ADC_HC4 0x10 > > +#define REG_ADC_HS 0x14 > > +#define REG_ADC_R0 0x18 > > +#define REG_ADC_CFG 0x2C > > +#define REG_ADC_GC 0x30 > > +#define REG_ADC_GS 0x34 > > + > > +#define ADC_TIMEOUT msecs_to_jiffies(100) > > + > > +/* TSC registers */ > > +#define REG_TSC_BASIC_SETING 0x00 > > +#define REG_TSC_PRE_CHARGE_TIME 0x10 > > +#define REG_TSC_FLOW_CONTROL 0x20 > > +#define REG_TSC_MEASURE_VALUE 0x30 > > +#define REG_TSC_INT_EN 0x40 > > +#define REG_TSC_INT_SIG_EN 0x50 > > +#define REG_TSC_INT_STATUS 0x60 > > +#define REG_TSC_DEBUG_MODE 0x70 > > +#define REG_TSC_DEBUG_MODE2 0x80 > > + > > +/* TSC configuration registers field define */ > > +#define DETECT_4_WIRE_MODE (0x0 << 4) > > +#define AUTO_MEASURE 0x1 > > +#define MEASURE_SIGNAL 0x1 > > +#define DETECT_SIGNAL (0x1 << 4) > > +#define VALID_SIGNAL (0x1 << 8) > > +#define MEASURE_INT_EN 0x1 > > +#define MEASURE_SIG_EN 0x1 > > +#define VALID_SIG_EN (0x1 << 8) > > +#define DE_GLITCH_2 (0x2 << 29) > > +#define START_SENSE (0x1 << 12) > > +#define TSC_DISABLE (0x1 << 16) > > +#define DETECT_MODE 0x2 > > + > > +struct imx6ul_tsc { > > + struct device *dev; > > + struct input_dev *input; > > + void __iomem *tsc_regs; > > + void __iomem *adc_regs; > > + struct clk *tsc_clk; > > + struct clk *adc_clk; > > + > > + int xnur_gpio; > > + int measure_delay_time; > > + int pre_charge_time; > > + > > + struct completion completion; > > +}; > > + > > +/* > > + * TSC module need ADC to get the measure value. So > > + * before config TSC, we should initialize ADC module. > > + */ > > +static void imx6ul_adc_init(struct imx6ul_tsc *tsc) { > > + int adc_hc = 0; > > + int adc_gc; > > + int adc_gs; > > + int adc_cfg; > > + int timeout; > > + > > + adc_cfg = readl(tsc->adc_regs + REG_ADC_CFG); > > + adc_cfg |= ADC_12BIT_MODE | ADC_IPG_CLK; > > + adc_cfg |= ADC_CLK_DIV_8 | ADC_SHORT_SAMPLE_MODE; > > + adc_cfg &= ~ADC_HARDWARE_TRIGGER; > > + writel(adc_cfg, tsc->adc_regs + REG_ADC_CFG); > > + > > + /* enable calibration interrupt */ > > + adc_hc |= ADC_AIEN; > > + adc_hc |= ADC_CONV_DISABLE; > > + writel(adc_hc, tsc->adc_regs + REG_ADC_HC0); > > + > > + /* start ADC calibration */ > > + adc_gc = readl(tsc->adc_regs + REG_ADC_GC); > > + adc_gc |= ADC_CAL; > > + writel(adc_gc, tsc->adc_regs + REG_ADC_GC); > > + > > Since this is called on every resume you need to reinit completion; > probably at the beginning of this function. > > > + timeout = wait_for_completion_timeout > > + (&tsc->completion, ADC_TIMEOUT); > > + if (timeout == 0) > > + dev_err(tsc->dev, "Timeout for adc calibration\n"); > > + > > + adc_gs = readl(tsc->adc_regs + REG_ADC_GS); > > + if (adc_gs & ADC_CALF) > > + dev_err(tsc->dev, "ADC calibration failed\n"); > > + > > + /* TSC need the ADC work in hardware trigger */ > > + adc_cfg = readl(tsc->adc_regs + REG_ADC_CFG); > > + adc_cfg |= ADC_HARDWARE_TRIGGER; > > + writel(adc_cfg, tsc->adc_regs + REG_ADC_CFG); } > > + > > +/* > > + * This is a TSC workaround. Currently TSC misconnect two > > + * ADC channels, this function remap channel configure for > > + * hardware trigger. > > + */ > > +static void imx6ul_tsc_channel_config(struct imx6ul_tsc *tsc) { > > + int adc_hc0, adc_hc1, adc_hc2, adc_hc3, adc_hc4; > > + > > + adc_hc0 = DISABLE_CONVERSION_INT; > > + writel(adc_hc0, tsc->adc_regs + REG_ADC_HC0); > > + > > + adc_hc1 = DISABLE_CONVERSION_INT | SELECT_CHANNEL_4; > > + writel(adc_hc1, tsc->adc_regs + REG_ADC_HC1); > > + > > + adc_hc2 = DISABLE_CONVERSION_INT; > > + writel(adc_hc2, tsc->adc_regs + REG_ADC_HC2); > > + > > + adc_hc3 = DISABLE_CONVERSION_INT | SELECT_CHANNEL_1; > > + writel(adc_hc3, tsc->adc_regs + REG_ADC_HC3); > > + > > + adc_hc4 = DISABLE_CONVERSION_INT; > > + writel(adc_hc4, tsc->adc_regs + REG_ADC_HC4); } > > + > > +/* > > + * TSC setting, confige the pre-charge time and measure delay time. > > + * different touch screen may need different pre-charge time and > > + * measure delay time. > > + */ > > +static void imx6ul_tsc_set(struct imx6ul_tsc *tsc) { > > + int basic_setting = 0; > > + int start; > > + > > + basic_setting |= tsc->measure_delay_time << 8; > > + basic_setting |= DETECT_4_WIRE_MODE | AUTO_MEASURE; > > + writel(basic_setting, tsc->tsc_regs + REG_TSC_BASIC_SETING); > > + > > + writel(DE_GLITCH_2, tsc->tsc_regs + REG_TSC_DEBUG_MODE2); > > + > > + writel(tsc->pre_charge_time, tsc->tsc_regs + > REG_TSC_PRE_CHARGE_TIME); > > + writel(MEASURE_INT_EN, tsc->tsc_regs + REG_TSC_INT_EN); > > + writel(MEASURE_SIG_EN | VALID_SIG_EN, > > + tsc->tsc_regs + REG_TSC_INT_SIG_EN); > > + > > + /* start sense detection */ > > + start = readl(tsc->tsc_regs + REG_TSC_FLOW_CONTROL); > > + start |= START_SENSE; > > + start &= ~TSC_DISABLE; > > + writel(start, tsc->tsc_regs + REG_TSC_FLOW_CONTROL); } > > + > > +static void imx6ul_tsc_init(struct imx6ul_tsc *tsc) { > > + imx6ul_adc_init(tsc); > > + imx6ul_tsc_channel_config(tsc); > > + imx6ul_tsc_set(tsc); > > +} > > + > > +static irqreturn_t tsc_irq_fn(int irq, void *dev_id) { > > + struct imx6ul_tsc *tsc = (struct imx6ul_tsc *)dev_id; > > No need to cast void pointers. > > > + int status; > > + int value; > > + int x, y; > > + int xnur; > > + int debug_mode2; > > + int state_machine; > > + int start; > > + unsigned long timeout; > > + > > + status = readl(tsc->tsc_regs + REG_TSC_INT_STATUS); > > + > > + /* write 1 to clear the bit measure-signal */ > > + writel(MEASURE_SIGNAL | DETECT_SIGNAL, > > + tsc->tsc_regs + REG_TSC_INT_STATUS); > > + > > + /* It's a HW self-clean bit. Set this bit and start sense detection > */ > > + start = readl(tsc->tsc_regs + REG_TSC_FLOW_CONTROL); > > + start |= START_SENSE; > > + writel(start, tsc->tsc_regs + REG_TSC_FLOW_CONTROL); > > + > > + if (status & MEASURE_SIGNAL) { > > + value = readl(tsc->tsc_regs + REG_TSC_MEASURE_VALUE); > > + x = (value >> 16) & 0x0fff; > > + y = value & 0x0fff; > > + > > + /* > > + * Delay some time(max 2ms), wait the pre-charge done. > > + * After the pre-change mode, TSC go into detect mode. > > + * And in detect mode, we can get the xnur gpio value. > > + * If xnur is low, this means the touch screen still > > + * be touched. If xnur is high, this means finger leave > > + * the touch screen. > > + */ > > + timeout = jiffies + HZ/500; > > + do { > > + if (time_after(jiffies, timeout)) { > > + xnur = 0; > > + goto touch_event; > > + } > > + usleep_range(200, 400); > > + debug_mode2 = readl(tsc->tsc_regs + > REG_TSC_DEBUG_MODE2); > > + state_machine = (debug_mode2 >> 20) & 0x7; > > + } while (state_machine != DETECT_MODE); > > + usleep_range(200, 400); > > + > > + xnur = gpio_get_value(tsc->xnur_gpio); > > It seems to me that this GPIO is actually active low: we reporting active > touch as long as we read 0. > > > +touch_event: > > + if (xnur == 0) { > > + input_report_key(tsc->input, BTN_TOUCH, 1); > > + input_report_abs(tsc->input, ABS_X, x); > > + input_report_abs(tsc->input, ABS_Y, y); > > + } else > > + input_report_key(tsc->input, BTN_TOUCH, 0); > > If one branch has braces all of them should have braces. > > > + > > + input_sync(tsc->input); > > + } > > + > > + return IRQ_HANDLED; > > +} > > + > > +static irqreturn_t adc_irq_fn(int irq, void *dev_id) { > > + struct imx6ul_tsc *tsc = (struct imx6ul_tsc *)dev_id; > > + int coco; > > + int value; > > + > > + coco = readl(tsc->adc_regs + REG_ADC_HS); > > + if (coco & 0x01) { > > + value = readl(tsc->adc_regs + REG_ADC_R0); > > + complete(&tsc->completion); > > + } > > + > > + return IRQ_HANDLED; > > +} > > + > > +static const struct of_device_id imx6ul_tsc_match[] = { > > + { .compatible = "fsl,imx6ul-tsc", }, > > + { /* sentinel */ } > > +}; > > +MODULE_DEVICE_TABLE(of, imx6ul_tsc_match); > > + > > +static int imx6ul_tsc_probe(struct platform_device *pdev) { > > + struct imx6ul_tsc *tsc; > > + struct resource *tsc_mem; > > + struct resource *adc_mem; > > + struct input_dev *input_dev; > > + struct device_node *np = pdev->dev.of_node; > > + int err; > > + int tsc_irq; > > + int adc_irq; > > + > > + tsc = devm_kzalloc(&pdev->dev, sizeof(struct imx6ul_tsc), > GFP_KERNEL); > > + input_dev = devm_input_allocate_device(&pdev->dev); > > Using devm does not mean you do not need to check results of memory > allocation. > > > + > > + tsc->dev = &pdev->dev; > > + > > + tsc->input = input_dev; > > + tsc->input->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); > > + tsc->input->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH); > > + input_set_abs_params(tsc->input, ABS_X, 0, 0xFFF, 0, 0); > > + input_set_abs_params(tsc->input, ABS_Y, 0, 0xFFF, 0, 0); > > + > > + tsc->input->name = "iMX6UL TouchScreen Controller"; > > + > > + tsc->xnur_gpio = of_get_named_gpio(np, "xnur-gpio", 0); > > + err = gpio_request_one(tsc->xnur_gpio, GPIOF_IN, "tsc_X-"); > > Why are you not using devm for gpio? Actually, why don't you also use > gpiod? As is you are leaking that gpio in all error paths below. > > > + if (err) { > > + dev_err(&pdev->dev, "failed to request GPIO tsc_X-\n"); > > + return err; > > + } > > + > > + tsc_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); > > + tsc->tsc_regs = devm_ioremap_resource(&pdev->dev, tsc_mem); > > + if (IS_ERR(tsc->tsc_regs)) { > > + dev_err(&pdev->dev, "failed to remap tsc memory\n"); > > + err = PTR_ERR(tsc->tsc_regs); > > + return err; > > + } > > + > > + adc_mem = platform_get_resource(pdev, IORESOURCE_MEM, 1); > > + tsc->adc_regs = devm_ioremap_resource(&pdev->dev, adc_mem); > > + if (IS_ERR(tsc->adc_regs)) { > > + dev_err(&pdev->dev, "failed to remap adc memory\n"); > > + err = PTR_ERR(tsc->adc_regs); > > + return err; > > + } > > + > > + tsc->tsc_clk = devm_clk_get(&pdev->dev, "tsc"); > > + if (IS_ERR(tsc->tsc_clk)) { > > + dev_err(&pdev->dev, "failed getting tsc clock\n"); > > + err = PTR_ERR(tsc->tsc_clk); > > + return err; > > + } > > + > > + tsc->adc_clk = devm_clk_get(&pdev->dev, "adc"); > > + if (IS_ERR(tsc->adc_clk)) { > > + dev_err(&pdev->dev, "failed getting adc clock\n"); > > + err = PTR_ERR(tsc->adc_clk); > > + return err; > > + } > > + > > + tsc_irq = platform_get_irq(pdev, 0); > > + if (tsc_irq < 0) { > > + dev_err(&pdev->dev, "no tsc irq resource?\n"); > > + return tsc_irq; > > + } > > + > > + adc_irq = platform_get_irq(pdev, 1); > > + if (adc_irq <= 0) { > > + dev_err(&pdev->dev, "no adc irq resource?\n"); > > + return adc_irq; > > + } > > + > > + err = devm_request_threaded_irq(tsc->dev, tsc_irq, > > + NULL, tsc_irq_fn, > > + IRQF_TRIGGER_HIGH | IRQF_ONESHOT, > > + dev_name(&pdev->dev), tsc); > > + if (err < 0) { > > + dev_err(&pdev->dev, > > + "failed requesting tsc irq %d\n", > > + tsc_irq); > > + return err; > > + } > > + > > + err = devm_request_irq(tsc->dev, adc_irq, > > + adc_irq_fn, 0, > > + dev_name(&pdev->dev), tsc); > > + if (err < 0) { > > + dev_err(&pdev->dev, > > + "failed requesting adc irq %d\n", > > + adc_irq); > > + return err; > > + } > > + > > + err = of_property_read_u32(np, "measure-delay-time", > > + &tsc->measure_delay_time); > > + if (err) > > + tsc->measure_delay_time = 0xffff; > > + > > + err = of_property_read_u32(np, "pre-charge-time", > > + &tsc->pre_charge_time); > > + if (err) > > + tsc->pre_charge_time = 0xfff; > > + > > + init_completion(&tsc->completion); > > + > > + err = clk_prepare_enable(tsc->adc_clk); > > + if (err) { > > + dev_err(&pdev->dev, > > + "Could not prepare or enable the adc clock.\n"); > > + return err; > > + } > > + > > + err = clk_prepare_enable(tsc->tsc_clk); > > + if (err) { > > + dev_err(&pdev->dev, > > + "Could not prepare or enable the tsc clock.\n"); > > + goto error_tsc_clk_enable; > > + } > > + > > + err = input_register_device(tsc->input); > > + if (err < 0) { > > + dev_err(&pdev->dev, "failed to register input device\n"); > > + err = -EIO; > > + goto err_input_register; > > + } > > + > > + imx6ul_tsc_init(tsc); > > Enabling clock and initializing the controller is better in open() method > of input device. If you also implement close() you can get rid of > remove(). > > > + > > + platform_set_drvdata(pdev, tsc); > > + return 0; > > + > > +err_input_register: > > + clk_disable_unprepare(tsc->tsc_clk); > > +error_tsc_clk_enable: > > + clk_disable_unprepare(tsc->adc_clk); > > + > > + return err; > > +} > > + > > +static void imx6ul_tsc_disable(struct imx6ul_tsc *tsc) { > > + int tsc_flow; > > + int adc_cfg; > > + > > + /* TSC controller enters to idle status */ > > + tsc_flow = readl(tsc->tsc_regs + REG_TSC_FLOW_CONTROL); > > + tsc_flow |= TSC_DISABLE; > > + writel(tsc_flow, tsc->tsc_regs + REG_TSC_FLOW_CONTROL); > > + > > + /* ADC controller enters to stop mode */ > > + adc_cfg = readl(tsc->adc_regs + REG_ADC_HC0); > > + adc_cfg |= ADC_CONV_DISABLE; > > + writel(adc_cfg, tsc->adc_regs + REG_ADC_HC0); } > > + > > +static int imx6ul_tsc_remove(struct platform_device *pdev) { > > + struct imx6ul_tsc *tsc = platform_get_drvdata(pdev); > > + > > + imx6ul_tsc_disable(tsc); > > + > > + clk_disable_unprepare(tsc->tsc_clk); > > + clk_disable_unprepare(tsc->adc_clk); > > + input_unregister_device(tsc->input); > > + kfree(tsc); > > Tsc is allocated with devm(), you can't kfree() it. > > + > > + return 0; > > +} > > + > > +static int __maybe_unused imx6ul_tsc_suspend(struct device *dev) { > > + struct platform_device *pdev = to_platform_device(dev); > > + struct imx6ul_tsc *tsc = platform_get_drvdata(pdev); > > + > > + imx6ul_tsc_disable(tsc); > > + > > + clk_disable_unprepare(tsc->tsc_clk); > > + clk_disable_unprepare(tsc->adc_clk); > > + > > + return 0; > > +} > > + > > +static int __maybe_unused imx6ul_tsc_resume(struct device *dev) { > > + struct platform_device *pdev = to_platform_device(dev); > > + struct imx6ul_tsc *tsc = platform_get_drvdata(pdev); > > + int err; > > + > > + err = clk_prepare_enable(tsc->adc_clk); > > + if (err) > > + return err; > > + > > + err = clk_prepare_enable(tsc->tsc_clk); > > + if (err) { > > + clk_disable_unprepare(tsc->adc_clk); > > + return err; > > + } > > + > > + imx6ul_tsc_init(tsc); > > + return 0; > > +} > > + > > +static SIMPLE_DEV_PM_OPS(imx6ul_tsc_pm_ops, > > + imx6ul_tsc_suspend, > > + imx6ul_tsc_resume); > > + > > +static struct platform_driver imx6ul_tsc_driver = { > > + .driver = { > > + .name = "imx6ul-tsc", > > + .owner = THIS_MODULE, > > + .of_match_table = imx6ul_tsc_match, > > + .pm = &imx6ul_tsc_pm_ops, > > + }, > > + .probe = imx6ul_tsc_probe, > > + .remove = imx6ul_tsc_remove, > > +}; > > +module_platform_driver(imx6ul_tsc_driver); > > + > > +MODULE_AUTHOR("Haibo Chen "); > > +MODULE_DESCRIPTION("Freescale i.MX6UL Touchscreen controller > > +driver"); MODULE_LICENSE("GPL v2"); > > -- > > 1.9.1 > > > > Can you try the patch below and let me know if it still works (you'll > need to adjust your DTS for xnur gpio being active low). > > Thanks! > > -- > Dmitry > > Input: imx6ul_tsc - misc changes > > From: Dmitry Torokhov > > Signed-off-by: Dmitry Torokhov > --- > .../bindings/input/touchscreen/imx6ul_tsc.txt | 2 > drivers/input/touchscreen/Kconfig | 2 > drivers/input/touchscreen/imx6ul_tsc.c | 262 +++++++++++--- > ------ > 3 files changed, 143 insertions(+), 123 deletions(-) > > diff --git > a/Documentation/devicetree/bindings/input/touchscreen/imx6ul_tsc.txt > b/Documentation/devicetree/bindings/input/touchscreen/imx6ul_tsc.txt > index ac41c32..c933588 100644 > --- a/Documentation/devicetree/bindings/input/touchscreen/imx6ul_tsc.txt > +++ b/Documentation/devicetree/bindings/input/touchscreen/imx6ul_tsc.txt > @@ -29,7 +29,7 @@ Example: > clock-names = "tsc", "adc"; > pinctrl-names = "default"; > pinctrl-0 = <&pinctrl_tsc>; > - xnur-gpio = <&gpio1 3 GPIO_ACTIVE_HIGH>; > + xnur-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>; > measure-delay-time = <0xfff>; > pre-charge-time = <0xffff>; > status = "okay"; > diff --git a/drivers/input/touchscreen/Kconfig > b/drivers/input/touchscreen/Kconfig > index 9a1a293..5ecf19b 100644 > --- a/drivers/input/touchscreen/Kconfig > +++ b/drivers/input/touchscreen/Kconfig > @@ -481,7 +481,7 @@ config TOUCHSCREEN_MTOUCH > > config TOUCHSCREEN_IMX6UL_TSC > tristate "Freescale i.MX6UL touchscreen controller" > - depends on OF > + depends on (OF && GPIOLIB) || COMPILE_TEST > help > Say Y here if you have a Freescale i.MX6UL, and want to > use the internal touchscreen controller. > diff --git a/drivers/input/touchscreen/imx6ul_tsc.c > b/drivers/input/touchscreen/imx6ul_tsc.c > index 807f1db..1d028ed 100644 > --- a/drivers/input/touchscreen/imx6ul_tsc.c > +++ b/drivers/input/touchscreen/imx6ul_tsc.c > @@ -11,15 +11,12 @@ > #include > #include > #include > -#include > +#include > #include > #include > #include > #include > #include > -#include > -#include > -#include > #include > #include > #include > @@ -85,8 +82,8 @@ struct imx6ul_tsc { > void __iomem *adc_regs; > struct clk *tsc_clk; > struct clk *adc_clk; > + struct gpio_desc *xnur_gpio; > > - int xnur_gpio; > int measure_delay_time; > int pre_charge_time; > > @@ -105,6 +102,8 @@ static void imx6ul_adc_init(struct imx6ul_tsc *tsc) > int adc_cfg; > int timeout; > > + reinit_completion(&tsc->completion); > + > adc_cfg = readl(tsc->adc_regs + REG_ADC_CFG); > adc_cfg |= ADC_12BIT_MODE | ADC_IPG_CLK; > adc_cfg |= ADC_CLK_DIV_8 | ADC_SHORT_SAMPLE_MODE; > @@ -196,17 +195,33 @@ static void imx6ul_tsc_init(struct imx6ul_tsc *tsc) > imx6ul_tsc_set(tsc); > } > > +static void imx6ul_tsc_disable(struct imx6ul_tsc *tsc) > +{ > + int tsc_flow; > + int adc_cfg; > + > + /* TSC controller enters to idle status */ > + tsc_flow = readl(tsc->tsc_regs + REG_TSC_FLOW_CONTROL); > + tsc_flow |= TSC_DISABLE; > + writel(tsc_flow, tsc->tsc_regs + REG_TSC_FLOW_CONTROL); > + > + /* ADC controller enters to stop mode */ > + adc_cfg = readl(tsc->adc_regs + REG_ADC_HC0); > + adc_cfg |= ADC_CONV_DISABLE; > + writel(adc_cfg, tsc->adc_regs + REG_ADC_HC0); > +} > + > static irqreturn_t tsc_irq_fn(int irq, void *dev_id) > { > struct imx6ul_tsc *tsc = (struct imx6ul_tsc *)dev_id; > int status; > int value; > int x, y; > - int xnur; > int debug_mode2; > int state_machine; > int start; > unsigned long timeout; > + bool touch; > > status = readl(tsc->tsc_regs + REG_TSC_INT_STATUS); > > @@ -235,8 +250,8 @@ static irqreturn_t tsc_irq_fn(int irq, void *dev_id) > timeout = jiffies + HZ/500; > do { > if (time_after(jiffies, timeout)) { > - xnur = 0; > - goto touch_event; > + touch = true; > + goto report_touch; > } > usleep_range(200, 400); > debug_mode2 = readl(tsc->tsc_regs + > REG_TSC_DEBUG_MODE2); > @@ -244,14 +259,15 @@ static irqreturn_t tsc_irq_fn(int irq, void *dev_id) > } while (state_machine != DETECT_MODE); > usleep_range(200, 400); > > - xnur = gpio_get_value(tsc->xnur_gpio); > -touch_event: > - if (xnur == 0) { > + touch = gpiod_get_value_cansleep(tsc->xnur_gpio); > +report_touch: > + if (touch) { > input_report_key(tsc->input, BTN_TOUCH, 1); > input_report_abs(tsc->input, ABS_X, x); > input_report_abs(tsc->input, ABS_Y, y); > - } else > + } else { > input_report_key(tsc->input, BTN_TOUCH, 0); > + } > > input_sync(tsc->input); > } > @@ -261,7 +277,7 @@ touch_event: > > static irqreturn_t adc_irq_fn(int irq, void *dev_id) > { > - struct imx6ul_tsc *tsc = (struct imx6ul_tsc *)dev_id; > + struct imx6ul_tsc *tsc = dev_id; > int coco; > int value; > > @@ -274,70 +290,113 @@ static irqreturn_t adc_irq_fn(int irq, void > *dev_id) > return IRQ_HANDLED; > } > > -static const struct of_device_id imx6ul_tsc_match[] = { > - { .compatible = "fsl,imx6ul-tsc", }, > - { /* sentinel */ } > -}; > -MODULE_DEVICE_TABLE(of, imx6ul_tsc_match); > +static int imx6ul_tsc_open(struct input_dev *input_dev) > +{ > + struct imx6ul_tsc *tsc = input_get_drvdata(input_dev); > + int err; > + > + err = clk_prepare_enable(tsc->adc_clk); > + if (err) { > + dev_err(tsc->dev, > + "Could not prepare or enable the adc clock: %d\n", > + err); > + return err; > + } > + > + err = clk_prepare_enable(tsc->tsc_clk); > + if (err) { > + dev_err(tsc->dev, > + "Could not prepare or enable the tsc clock: %d\n", > + err); > + clk_disable_unprepare(tsc->adc_clk); > + return err; > + } > + > + imx6ul_tsc_init(tsc); > + > + return 0; > +} > + > +static void imx6ul_tsc_close(struct input_dev *input_dev) > +{ > + struct imx6ul_tsc *tsc = input_get_drvdata(input_dev); > + > + imx6ul_tsc_disable(tsc); > + > + clk_disable_unprepare(tsc->tsc_clk); > + clk_disable_unprepare(tsc->adc_clk); > +} > > static int imx6ul_tsc_probe(struct platform_device *pdev) > { > + struct device_node *np = pdev->dev.of_node; > struct imx6ul_tsc *tsc; > + struct input_dev *input_dev; > struct resource *tsc_mem; > struct resource *adc_mem; > - struct input_dev *input_dev; > - struct device_node *np = pdev->dev.of_node; > int err; > int tsc_irq; > int adc_irq; > > tsc = devm_kzalloc(&pdev->dev, sizeof(struct imx6ul_tsc), > GFP_KERNEL); > + if (!tsc) > + return -ENOMEM; > + > input_dev = devm_input_allocate_device(&pdev->dev); > + if (!input_dev) > + return -ENOMEM; > > - tsc->dev = &pdev->dev; > + input_dev->name = "iMX6UL TouchScreen Controller"; > + input_dev->id.bustype = BUS_HOST; > > - tsc->input = input_dev; > - tsc->input->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); > - tsc->input->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH); > - input_set_abs_params(tsc->input, ABS_X, 0, 0xFFF, 0, 0); > - input_set_abs_params(tsc->input, ABS_Y, 0, 0xFFF, 0, 0); > + input_dev->open = imx6ul_tsc_open; > + input_dev->close = imx6ul_tsc_close; > > - tsc->input->name = "iMX6UL TouchScreen Controller"; > + input_set_capability(input_dev, EV_KEY, BTN_TOUCH); > + input_set_abs_params(input_dev, ABS_X, 0, 0xFFF, 0, 0); > + input_set_abs_params(input_dev, ABS_Y, 0, 0xFFF, 0, 0); > > - tsc->xnur_gpio = of_get_named_gpio(np, "xnur-gpio", 0); > - err = gpio_request_one(tsc->xnur_gpio, GPIOF_IN, "tsc_X-"); > - if (err) { > - dev_err(&pdev->dev, "failed to request GPIO tsc_X-\n"); > + input_set_drvdata(input_dev, tsc); > + > + tsc->dev = &pdev->dev; > + tsc->input = input_dev; > + init_completion(&tsc->completion); > + > + tsc->xnur_gpio = devm_gpiod_get(&pdev->dev, "xnur-gpio", GPIOD_IN); > + if (IS_ERR(tsc->xnur_gpio)) { > + err = PTR_ERR(tsc->xnur_gpio); > + dev_err(&pdev->dev, > + "failed to request GPIO tsc_X- (xnur): %d\n", err); > return err; > } > > tsc_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); > tsc->tsc_regs = devm_ioremap_resource(&pdev->dev, tsc_mem); > if (IS_ERR(tsc->tsc_regs)) { > - dev_err(&pdev->dev, "failed to remap tsc memory\n"); > err = PTR_ERR(tsc->tsc_regs); > + dev_err(&pdev->dev, "failed to remap tsc memory: %d\n", err); > return err; > } > > adc_mem = platform_get_resource(pdev, IORESOURCE_MEM, 1); > tsc->adc_regs = devm_ioremap_resource(&pdev->dev, adc_mem); > if (IS_ERR(tsc->adc_regs)) { > - dev_err(&pdev->dev, "failed to remap adc memory\n"); > err = PTR_ERR(tsc->adc_regs); > + dev_err(&pdev->dev, "failed to remap adc memory: %d\n", err); > return err; > } > > tsc->tsc_clk = devm_clk_get(&pdev->dev, "tsc"); > if (IS_ERR(tsc->tsc_clk)) { > - dev_err(&pdev->dev, "failed getting tsc clock\n"); > err = PTR_ERR(tsc->tsc_clk); > + dev_err(&pdev->dev, "failed getting tsc clock: %d\n", err); > return err; > } > > tsc->adc_clk = devm_clk_get(&pdev->dev, "adc"); > if (IS_ERR(tsc->adc_clk)) { > - dev_err(&pdev->dev, "failed getting adc clock\n"); > err = PTR_ERR(tsc->adc_clk); > + dev_err(&pdev->dev, "failed getting adc clock: %d\n", err); > return err; > } > > @@ -354,111 +413,61 @@ static int imx6ul_tsc_probe(struct platform_device > *pdev) > } > > err = devm_request_threaded_irq(tsc->dev, tsc_irq, > - NULL, tsc_irq_fn, > - IRQF_TRIGGER_HIGH | IRQF_ONESHOT, > + NULL, tsc_irq_fn, IRQF_ONESHOT, > dev_name(&pdev->dev), tsc); > - if (err < 0) { > + if (err) { > dev_err(&pdev->dev, > - "failed requesting tsc irq %d\n", > - tsc_irq); > + "failed requesting tsc irq %di: %d\n", > + tsc_irq, err); > return err; > } > > - err = devm_request_irq(tsc->dev, adc_irq, > - adc_irq_fn, 0, > + err = devm_request_irq(tsc->dev, adc_irq, adc_irq_fn, 0, > dev_name(&pdev->dev), tsc); > - if (err < 0) { > + if (err) { > dev_err(&pdev->dev, > - "failed requesting adc irq %d\n", > - adc_irq); > + "failed requesting adc irq %d: %d\n", > + adc_irq, err); > return err; > } > > err = of_property_read_u32(np, "measure-delay-time", > - &tsc->measure_delay_time); > + &tsc->measure_delay_time); > if (err) > tsc->measure_delay_time = 0xffff; > > err = of_property_read_u32(np, "pre-charge-time", > - &tsc->pre_charge_time); > + &tsc->pre_charge_time); > if (err) > tsc->pre_charge_time = 0xfff; > > - init_completion(&tsc->completion); > - > - err = clk_prepare_enable(tsc->adc_clk); > + err = input_register_device(tsc->input); > if (err) { > dev_err(&pdev->dev, > - "Could not prepare or enable the adc clock.\n"); > + "failed to register input device: %d\n", err); > return err; > } > > - err = clk_prepare_enable(tsc->tsc_clk); > - if (err) { > - dev_err(&pdev->dev, > - "Could not prepare or enable the tsc clock.\n"); > - goto error_tsc_clk_enable; > - } > - > - err = input_register_device(tsc->input); > - if (err < 0) { > - dev_err(&pdev->dev, "failed to register input device\n"); > - err = -EIO; > - goto err_input_register; > - } > - > - imx6ul_tsc_init(tsc); > - > platform_set_drvdata(pdev, tsc); > return 0; > - > -err_input_register: > - clk_disable_unprepare(tsc->tsc_clk); > -error_tsc_clk_enable: > - clk_disable_unprepare(tsc->adc_clk); > - > - return err; > -} > - > -static void imx6ul_tsc_disable(struct imx6ul_tsc *tsc) > -{ > - int tsc_flow; > - int adc_cfg; > - > - /* TSC controller enters to idle status */ > - tsc_flow = readl(tsc->tsc_regs + REG_TSC_FLOW_CONTROL); > - tsc_flow |= TSC_DISABLE; > - writel(tsc_flow, tsc->tsc_regs + REG_TSC_FLOW_CONTROL); > - > - /* ADC controller enters to stop mode */ > - adc_cfg = readl(tsc->adc_regs + REG_ADC_HC0); > - adc_cfg |= ADC_CONV_DISABLE; > - writel(adc_cfg, tsc->adc_regs + REG_ADC_HC0); > -} > - > -static int imx6ul_tsc_remove(struct platform_device *pdev) > -{ > - struct imx6ul_tsc *tsc = platform_get_drvdata(pdev); > - > - imx6ul_tsc_disable(tsc); > - > - clk_disable_unprepare(tsc->tsc_clk); > - clk_disable_unprepare(tsc->adc_clk); > - input_unregister_device(tsc->input); > - kfree(tsc); > - > - return 0; > } > > static int __maybe_unused imx6ul_tsc_suspend(struct device *dev) > { > struct platform_device *pdev = to_platform_device(dev); > struct imx6ul_tsc *tsc = platform_get_drvdata(pdev); > + struct input_dev *input_dev = tsc->input; > > - imx6ul_tsc_disable(tsc); > + mutex_lock(&input_dev->mutex); > > - clk_disable_unprepare(tsc->tsc_clk); > - clk_disable_unprepare(tsc->adc_clk); > + if (input_dev->users) { > + imx6ul_tsc_disable(tsc); > + > + clk_disable_unprepare(tsc->tsc_clk); > + clk_disable_unprepare(tsc->adc_clk); > + } > + > + mutex_unlock(&input_dev->mutex); > > return 0; > } > @@ -467,35 +476,46 @@ static int __maybe_unused imx6ul_tsc_resume(struct > device *dev) > { > struct platform_device *pdev = to_platform_device(dev); > struct imx6ul_tsc *tsc = platform_get_drvdata(pdev); > - int err; > + struct input_dev *input_dev = tsc->input; > + int retval = 0; > > - err = clk_prepare_enable(tsc->adc_clk); > - if (err) > - return err; > + mutex_lock(&input_dev->mutex); > > - err = clk_prepare_enable(tsc->tsc_clk); > - if (err) { > - clk_disable_unprepare(tsc->adc_clk); > - return err; > + if (input_dev->users) { > + retval = clk_prepare_enable(tsc->adc_clk); > + if (retval) > + goto out; > + > + retval = clk_prepare_enable(tsc->tsc_clk); > + if (retval) { > + clk_disable_unprepare(tsc->adc_clk); > + goto out; > + } > + > + imx6ul_tsc_init(tsc); > } > > - imx6ul_tsc_init(tsc); > - return 0; > +out: > + mutex_unlock(&input_dev->mutex); > + return retval; > } > > static SIMPLE_DEV_PM_OPS(imx6ul_tsc_pm_ops, > - imx6ul_tsc_suspend, > - imx6ul_tsc_resume); > + imx6ul_tsc_suspend, imx6ul_tsc_resume); > + > +static const struct of_device_id imx6ul_tsc_match[] = { > + { .compatible = "fsl,imx6ul-tsc", }, > + { /* sentinel */ } > +}; > +MODULE_DEVICE_TABLE(of, imx6ul_tsc_match); > > static struct platform_driver imx6ul_tsc_driver = { > .driver = { > .name = "imx6ul-tsc", > - .owner = THIS_MODULE, > .of_match_table = imx6ul_tsc_match, > .pm = &imx6ul_tsc_pm_ops, > }, > .probe = imx6ul_tsc_probe, > - .remove = imx6ul_tsc_remove, > }; > module_platform_driver(imx6ul_tsc_driver); > -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/