From: =?utf-8?B?5rKz5ZCI6Iux5a6PIC8gS0FXQUnvvIxISURFSElSTw==?= 
	<hidehiro.kawai.ez@hitachi.com>
To: "'minyard@acm.org'" <minyard@acm.org>
CC: "openipmi-developer@lists.sourceforge.net" 
	<openipmi-developer@lists.sourceforge.net>,
        "linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Subject: RE: [PATCH 7/7] ipmi/kcs: Don't run the KCS state machine when it
 is KCS_IDLE
Thread-Topic: [PATCH 7/7] ipmi/kcs: Don't run the KCS state machine when it
 is KCS_IDLE
Thread-Index: AQHQ1c5R+UxrINSkDEO5r8EHT60uwp4RB7iggAa6goCAAqlZUA==
Date: Mon, 24 Aug 2015 01:52:26 +0000
Message-ID: <04EAB7311EE43145B2D3536183D1A8445493D025@GSjpTKYDCembx31.service.hitachi.net>
References: <20150727055516.4759.34462.stgit@softrs>
 <20150727055516.4759.65106.stgit@softrs> <55CAC849.70902@acm.org>
 <04EAB7311EE43145B2D3536183D1A84454938089@GSjpTKYDCembx31.service.hitachi.net>
 <55D8B543.4000805@acm.org>
In-Reply-To: <55D8B543.4000805@acm.org>
Accept-Language: ja-JP, en-US
Content-Language: ja-JP
Content-Type: text/plain; charset="utf-8"
MIME-Version: 1.0
Sender: linux-kernel-owner@vger.kernel.org
Content-Transfer-Encoding: 8bit
Content-Length: 3501
Lines: 87

> From: Corey Minyard [mailto:tcminyard@gmail.com] On Behalf Of Corey Minyard
> 
> On 08/17/2015 09:54 PM, 河合英宏 / KAWAI，HIDEHIRO wrote:
> >> From: Corey Minyard [mailto:tcminyard@gmail.com] On Behalf Of Corey Minyard
> >>
> >> This patch will break ATN handling on the interfaces.  So we can't do this.
> > I understand.  So how about doing like this:
> >
> > 	/* All states wait for ibf, so just do it here. */
> > -	if (!check_ibf(kcs, status, time))
> > +	if (kcs->state != KCS_IDLE && !check_ibf(kcs, status, time))
> > 		return SI_SM_CALL_WITH_DELAY;
> >
> > I think it is not necessary to wait IBF when the state is IDLE.
> > In this way, we can also handle the ATN case.
> 
> I think it would be more reliable to go up a level and add a timeout.

It may be so, but we should address this issue separately (at least
I think above solution reasonably solves the issue).

This issue happens after all queued messages are processed or dropped
by timeout.  There is no current message.  So what should we set
a timeout against?  We can add a timeout into my new flush_messages(),
but that is meaningful only in panic context.  That doesn't help
in normal context; we would perform a busy loop of smi_event_handler()
and schedule() in ipmi_thread().

Regards,

Hidehiro Kawai

> One should
> be there, anyway.  I thought they were all covered, but I may have missed
> something.
> 
> -corey
> 
> >
> > Regards,
> >
> > Hidehiro Kawai
> > Hitachi, Ltd. Research & Development Group
> >
> >> It's going to be extremely hard to recover if the BMC is not working
> >> correctly when a panic happens.  I'm not sure what can be done, but if
> >> you can fix it another way it would be good.
> >>
> >> -corey
> >>
> >> On 07/27/2015 12:55 AM, Hidehiro Kawai wrote:
> >>> If a BMC is unresponsive for some reason, it ends up completing
> >>> the requested message as an error, then kcs_event() is called once
> >>> to advance the state machine.  However, since the BMC is
> >>> unresponsive now, the status of the KCS interface may not be
> >>> idle.  As the result, the state machine can continue to run and
> >>> comsume CPU time indefinitely even if there is no more request
> >>> message.  Moreover, if this happens in run-to-completion mode
> >>> (i.e. context of panic_event()), the kernel hangs up.
> >>>
> >>> To fix this problem, this patch ignores kcs_event() call if there
> >>> is no request message to be processed.
> >>>
> >>> Signed-off-by: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com>
> >>> ---
> >>>  drivers/char/ipmi/ipmi_kcs_sm.c |    4 ++++
> >>>  1 file changed, 4 insertions(+)
> >>>
> >>> diff --git a/drivers/char/ipmi/ipmi_kcs_sm.c b/drivers/char/ipmi/ipmi_kcs_sm.c
> >>> index 8c25f59..0e187fb 100644
> >>> --- a/drivers/char/ipmi/ipmi_kcs_sm.c
> >>> +++ b/drivers/char/ipmi/ipmi_kcs_sm.c
> >>> @@ -353,6 +353,10 @@ static enum si_sm_result kcs_event(struct si_sm_data *kcs, long time)
> >>>  	if (kcs_debug & KCS_DEBUG_STATES)
> >>>  		printk(KERN_DEBUG "KCS: State = %d, %x\n", kcs->state, status);
> >>>
> >>> +	/* We don't want to run the state machine when the state is IDLE */
> >>> +	if (kcs->state == KCS_IDLE)
> >>> +		return SI_SM_IDLE;
> >>> +
> >>>  	/* All states wait for ibf, so just do it here. */
> >>>  	if (!check_ibf(kcs, status, time))
> >>>  		return SI_SM_CALL_WITH_DELAY;
> >>>
> >>>

????{.n?+???????+%?????ݶ??w??{.n?+????{??G?????{ay?ʇڙ?,j??f???h?????????z_??(?階?ݢj"???m??????G????????????&???~???iO???z??v?^?m????????????I?