Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S932283AbbHXSyA (ORCPT ); Mon, 24 Aug 2015 14:54:00 -0400 Received: from mail-qk0-f179.google.com ([209.85.220.179]:34594 "EHLO mail-qk0-f179.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751959AbbHXSx6 (ORCPT ); Mon, 24 Aug 2015 14:53:58 -0400 MIME-Version: 1.0 In-Reply-To: <1438831173-8761-1-git-send-email-punnaia@xilinx.com> References: <1438831173-8761-1-git-send-email-punnaia@xilinx.com> From: Rob Herring Date: Mon, 24 Aug 2015 13:53:38 -0500 Message-ID: Subject: Re: [PATCH v4 1/2] Documentation: dt: Add Xilinx zynqmp dma device tree binding documentation To: Punnaiah Choudary Kalluri Cc: Rob Herring , Pawel Moll , Mark Rutland , Ian Campbell , Kumar Gala , Michal Simek , Vinod Koul , Dan Williams , "devicetree@vger.kernel.org" , "linux-kernel@vger.kernel.org" , Punnaiah Choudary , punnaiah choudary kalluri , dmaengine@vger.kernel.org, Punnaiah Choudary Kalluri , "linux-arm-kernel@lists.infradead.org" Content-Type: text/plain; charset=UTF-8 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 4559 Lines: 110 On Wed, Aug 5, 2015 at 10:19 PM, Punnaiah Choudary Kalluri wrote: > Device-tree binding documentation for Xilinx zynqmp dma engine used in > Zynq UltraScale+ MPSoC. > > Signed-off-by: Punnaiah Choudary Kalluri > --- > Changes in v4: > - None > Changes in v3: > - None > Changes in v2: > - None > --- > .../devicetree/bindings/dma/xilinx/zynqmp_dma.txt | 61 ++++++++++++++++++++ > 1 files changed, 61 insertions(+), 0 deletions(-) > create mode 100644 Documentation/devicetree/bindings/dma/xilinx/zynqmp_dma.txt > > diff --git a/Documentation/devicetree/bindings/dma/xilinx/zynqmp_dma.txt b/Documentation/devicetree/bindings/dma/xilinx/zynqmp_dma.txt > new file mode 100644 > index 0000000..e4f92b9 > --- /dev/null > +++ b/Documentation/devicetree/bindings/dma/xilinx/zynqmp_dma.txt > @@ -0,0 +1,61 @@ > +Xilinx ZynqMP DMA engine, it does support memory to memory transfers, > +memory to device and device to memory transfers. It also has flow > +control and rate control support for slave/peripheral dma access. > + > +Required properties: > +- compatible: Should be "xlnx,zynqmp-dma-1.0" > +- #dma-cells: Should be <1>, a single cell holding a line request number > +- reg: Memory map for module access > +- interrupt-parent: Interrupt controller the interrupt is routed through > +- interrupts: Should contain DMA channel interrupt > +- xlnx,bus-width: AXI buswidth in bits. Should contain 128 or 64 > + > +Optional properties: > +- xlnx,include-sg: Indicates the controller to operate in simple or scatter > + gather dma mode > +- xlnx,ratectrl: Scheduling interval in terms of clock cycles for > + source AXI transaction > +- xlnx,overfetch: Tells whether the channel is allowed to over fetch the data > +- xlnx,src-issue: Number of AXI outstanding transactions on source side > +- xlnx,desc-axi-cohrnt: Tells whether the AXI transactions generated for the > + descriptor read are marked Non-coherent > +- xlnx,src-axi-cohrnt: Tells whether the AXI transactions generated for the > + source descriptor payload are marked Non-coherent > +- xlnx,dst-axi-cohrnt: Tells whether the AXI transactions generated for the > + dst descriptor payload are marked Non-coherent Do you really need 3? dma-coherent property doesn't work for you? Not that it should dictate the binding, but the kernel doesn't support a device needing both coherent and non-coherent DMA ops. > +- xlnx,desc-axi-qos: AXI QOS bits to be used for descriptor fetch > +- xlnx,src-axi-qos: AXI QOS bits to be used for data read > +- xlnx,dst-axi-qos: AXI QOS bits to be used for data write > +- xlnx,desc-axi-cache: AXI cache bits to be used for descriptor fetch. > +- xlnx,desc-axi-cache: AXI cache bits to be used for data read > +- xlnx,desc-axi-cache: AXI cache bits to be used for data write These signals are generally part of the coherent or not setting. This allows for potentially invalid combinations. Plus you have a copy/paste error. > +- xlnx,src-burst-len: AXI length for data read. Support only power of 2 values > + i.e 1,2,4,8 and 16 > +- xlnx,dst-burst-len: AXI length for data write. Support only power of 2 values > + i.e 1,2,4,8 and 16 > + > +Example: > +++++++++ > +fpd_dma_chan1: dma@FD500000 { > + compatible = "xlnx,zynqmp-dma-1.0"; > + reg = <0x0 0xFD500000 0x1000>; > + #dma_cells = <1>; > + interrupt-parent = <&gic>; > + interrupts = <0 117 4>; > + xlnx,bus-width = <128>; > + xlnx,include-sg; > + xlnx,overfetch; > + xlnx,ratectrl = <0>; > + xlnx,src-issue = <16>; > + xlnx,desc-axi-cohrnt; > + xlnx,src-axi-cohrnt; > + xlnx,dst-axi-cohrnt; > + xlnx,desc-axi-qos = <0>; > + xlnx,desc-axi-cache = <0>; > + xlnx,src-axi-qos = <0>; > + xlnx,src-axi-cache = <2>; > + xlnx,dst-axi-qos = <0>; > + xlnx,dst-axi-cache = <2>; > + xlnx,src-burst-len = <4>; > + xlnx,dst-burst-len = <4>; > +}; > -- > 1.7.4 > > > _______________________________________________ > linux-arm-kernel mailing list > linux-arm-kernel@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/