Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1755328AbbHXS7D (ORCPT ); Mon, 24 Aug 2015 14:59:03 -0400 Received: from mail-pa0-f43.google.com ([209.85.220.43]:35665 "EHLO mail-pa0-f43.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1755300AbbHXS67 (ORCPT ); Mon, 24 Aug 2015 14:58:59 -0400 From: Vaibhav Hiremath To: linux-arm-kernel@lists.infradead.org Cc: robh+dt@kernel.org, mturquette@baylibre.com, lee.jones@linaro.org, k.kozlowski@samsung.com, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-clk@vger.kernel.org, Vaibhav Hiremath Subject: [PATCH-v2 1/5] mfd: 88pm800: Fix tabbing issue Date: Tue, 25 Aug 2015 00:26:30 +0530 Message-Id: <1440442594-3102-3-git-send-email-vaibhav.hiremath@linaro.org> X-Mailer: git-send-email 1.9.1 In-Reply-To: <1440442594-3102-1-git-send-email-vaibhav.hiremath@linaro.org> References: <1440442594-3102-1-git-send-email-vaibhav.hiremath@linaro.org> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 9029 Lines: 301 Driver had coding style issues where spaces were used instead of tabs. This patch fixes them all. Signed-off-by: Vaibhav Hiremath --- drivers/mfd/88pm800.c | 125 ++++++++++++++++++++++++-------------------------- 1 file changed, 61 insertions(+), 64 deletions(-) diff --git a/drivers/mfd/88pm800.c b/drivers/mfd/88pm800.c index f104a32..c4e097d 100644 --- a/drivers/mfd/88pm800.c +++ b/drivers/mfd/88pm800.c @@ -30,55 +30,55 @@ #include /* Interrupt Registers */ -#define PM800_INT_STATUS1 (0x05) +#define PM800_INT_STATUS1 0x05 #define PM800_ONKEY_INT_STS1 (1 << 0) #define PM800_EXTON_INT_STS1 (1 << 1) -#define PM800_CHG_INT_STS1 (1 << 2) -#define PM800_BAT_INT_STS1 (1 << 3) -#define PM800_RTC_INT_STS1 (1 << 4) +#define PM800_CHG_INT_STS1 (1 << 2) +#define PM800_BAT_INT_STS1 (1 << 3) +#define PM800_RTC_INT_STS1 (1 << 4) #define PM800_CLASSD_OC_INT_STS1 (1 << 5) -#define PM800_INT_STATUS2 (0x06) +#define PM800_INT_STATUS2 0x06 #define PM800_VBAT_INT_STS2 (1 << 0) #define PM800_VSYS_INT_STS2 (1 << 1) #define PM800_VCHG_INT_STS2 (1 << 2) #define PM800_TINT_INT_STS2 (1 << 3) -#define PM800_GPADC0_INT_STS2 (1 << 4) +#define PM800_GPADC0_INT_STS2 (1 << 4) #define PM800_TBAT_INT_STS2 (1 << 5) -#define PM800_GPADC2_INT_STS2 (1 << 6) -#define PM800_GPADC3_INT_STS2 (1 << 7) +#define PM800_GPADC2_INT_STS2 (1 << 6) +#define PM800_GPADC3_INT_STS2 (1 << 7) -#define PM800_INT_STATUS3 (0x07) +#define PM800_INT_STATUS3 0x07 -#define PM800_INT_STATUS4 (0x08) +#define PM800_INT_STATUS4 0x08 #define PM800_GPIO0_INT_STS4 (1 << 0) #define PM800_GPIO1_INT_STS4 (1 << 1) #define PM800_GPIO2_INT_STS4 (1 << 2) #define PM800_GPIO3_INT_STS4 (1 << 3) #define PM800_GPIO4_INT_STS4 (1 << 4) -#define PM800_INT_ENA_1 (0x09) +#define PM800_INT_ENA_1 0x09 #define PM800_ONKEY_INT_ENA1 (1 << 0) #define PM800_EXTON_INT_ENA1 (1 << 1) -#define PM800_CHG_INT_ENA1 (1 << 2) -#define PM800_BAT_INT_ENA1 (1 << 3) -#define PM800_RTC_INT_ENA1 (1 << 4) +#define PM800_CHG_INT_ENA1 (1 << 2) +#define PM800_BAT_INT_ENA1 (1 << 3) +#define PM800_RTC_INT_ENA1 (1 << 4) #define PM800_CLASSD_OC_INT_ENA1 (1 << 5) -#define PM800_INT_ENA_2 (0x0A) +#define PM800_INT_ENA_2 0x0A #define PM800_VBAT_INT_ENA2 (1 << 0) #define PM800_VSYS_INT_ENA2 (1 << 1) #define PM800_VCHG_INT_ENA2 (1 << 2) #define PM800_TINT_INT_ENA2 (1 << 3) -#define PM800_INT_ENA_3 (0x0B) +#define PM800_INT_ENA_3 0x0B #define PM800_GPADC0_INT_ENA3 (1 << 0) #define PM800_GPADC1_INT_ENA3 (1 << 1) #define PM800_GPADC2_INT_ENA3 (1 << 2) #define PM800_GPADC3_INT_ENA3 (1 << 3) #define PM800_GPADC4_INT_ENA3 (1 << 4) -#define PM800_INT_ENA_4 (0x0C) +#define PM800_INT_ENA_4 0x0C #define PM800_GPIO0_INT_ENA4 (1 << 0) #define PM800_GPIO1_INT_ENA4 (1 << 1) #define PM800_GPIO2_INT_ENA4 (1 << 2) @@ -86,7 +86,7 @@ #define PM800_GPIO4_INT_ENA4 (1 << 4) /* number of INT_ENA & INT_STATUS regs */ -#define PM800_INT_REG_NUM (4) +#define PM800_INT_REG_NUM 4 /* Interrupt Number in 88PM800 */ enum { @@ -114,7 +114,7 @@ enum { }; /* PM800: generation identification number */ -#define PM800_CHIP_GEN_ID_NUM 0x3 +#define PM800_CHIP_GEN_ID_NUM 0x3 static const struct i2c_device_id pm80x_id_table[] = { {"88PM800", 0}, @@ -129,47 +129,47 @@ static const struct of_device_id pm80x_of_match_table[] = { static struct resource rtc_resources[] = { { - .name = "88pm80x-rtc", - .start = PM800_IRQ_RTC, - .end = PM800_IRQ_RTC, - .flags = IORESOURCE_IRQ, - }, + .name = "88pm80x-rtc", + .start = PM800_IRQ_RTC, + .end = PM800_IRQ_RTC, + .flags = IORESOURCE_IRQ, + }, }; static struct mfd_cell rtc_devs[] = { { - .name = "88pm80x-rtc", - .of_compatible = "marvell,88pm80x-rtc", - .num_resources = ARRAY_SIZE(rtc_resources), - .resources = &rtc_resources[0], - .id = -1, - }, + .name = "88pm80x-rtc", + .of_compatible = "marvell,88pm80x-rtc", + .num_resources = ARRAY_SIZE(rtc_resources), + .resources = &rtc_resources[0], + .id = -1, + }, }; static struct resource onkey_resources[] = { { - .name = "88pm80x-onkey", - .start = PM800_IRQ_ONKEY, - .end = PM800_IRQ_ONKEY, - .flags = IORESOURCE_IRQ, - }, + .name = "88pm80x-onkey", + .start = PM800_IRQ_ONKEY, + .end = PM800_IRQ_ONKEY, + .flags = IORESOURCE_IRQ, + }, }; static const struct mfd_cell onkey_devs[] = { { - .name = "88pm80x-onkey", - .of_compatible = "marvell,88pm80x-onkey", - .num_resources = 1, - .resources = &onkey_resources[0], - .id = -1, - }, + .name = "88pm80x-onkey", + .of_compatible = "marvell,88pm80x-onkey", + .num_resources = 1, + .resources = &onkey_resources[0], + .id = -1, + }, }; static const struct mfd_cell regulator_devs[] = { { - .name = "88pm80x-regulator", - .of_compatible = "marvell,88pm80x-regulator", - .id = -1, + .name = "88pm80x-regulator", + .of_compatible = "marvell,88pm80x-regulator", + .id = -1, }, }; @@ -323,8 +323,8 @@ out: static int device_onkey_init(struct pm80x_chip *chip) { return mfd_add_devices(chip->dev, 0, &onkey_devs[0], - ARRAY_SIZE(onkey_devs), &onkey_resources[0], 0, - NULL); + ARRAY_SIZE(onkey_devs), &onkey_resources[0], 0, + NULL); } static int device_rtc_init(struct pm80x_chip *chip) @@ -335,13 +335,13 @@ static int device_rtc_init(struct pm80x_chip *chip) rtc_devs[0].pdata_size = pdata->rtc ? sizeof(struct pm80x_rtc_pdata) : 0; return mfd_add_devices(chip->dev, 0, &rtc_devs[0], - ARRAY_SIZE(rtc_devs), NULL, 0, NULL); + ARRAY_SIZE(rtc_devs), NULL, 0, NULL); } static int device_regulator_init(struct pm80x_chip *chip) { return mfd_add_devices(chip->dev, 0, ®ulator_devs[0], - ARRAY_SIZE(regulator_devs), NULL, 0, NULL); + ARRAY_SIZE(regulator_devs), NULL, 0, NULL); } static int device_irq_init_800(struct pm80x_chip *chip) @@ -358,11 +358,10 @@ static int device_irq_init_800(struct pm80x_chip *chip) /* * irq_clr_on_wr defines the way of clearing interrupt by - * read/write(0/1). It's read-clear by default. + * read/write(0/1). It's read-clear by default. */ - mask = - PM800_WAKEUP2_INV_INT | PM800_WAKEUP2_INT_CLEAR | - PM800_WAKEUP2_INT_MASK; + mask = PM800_WAKEUP2_INV_INT | PM800_WAKEUP2_INT_CLEAR | + PM800_WAKEUP2_INT_MASK; irq_clr_mode = pdata->irq_clr_method == PM800_IRQ_CLR_ON_WRITE ? PM800_WAKEUP2_INT_WRITE_CLEAR : PM800_WAKEUP2_INT_READ_CLEAR; @@ -371,9 +370,8 @@ static int device_irq_init_800(struct pm80x_chip *chip) if (ret < 0) goto out; - ret = - regmap_add_irq_chip(chip->regmap, chip->irq, flags, -1, - chip->regmap_irq_chip, &chip->irq_data); + ret = regmap_add_irq_chip(chip->regmap, chip->irq, flags, -1, + chip->regmap_irq_chip, &chip->irq_data); out: return ret; @@ -409,18 +407,18 @@ static int pm800_pages_init(struct pm80x_chip *chip) /* PM800 block power page */ subchip->power_page = i2c_new_dummy(client->adapter, - subchip->power_page_addr); + subchip->power_page_addr); if (subchip->power_page == NULL) { ret = -ENODEV; goto out; } subchip->regmap_power = devm_regmap_init_i2c(subchip->power_page, - &pm80x_regmap_config); + &pm80x_regmap_config); if (IS_ERR(subchip->regmap_power)) { ret = PTR_ERR(subchip->regmap_power); dev_err(chip->dev, - "Failed to allocate regmap_power: %d\n", ret); + "Failed to allocate regmap_power: %d\n", ret); goto out; } @@ -428,18 +426,18 @@ static int pm800_pages_init(struct pm80x_chip *chip) /* PM800 block GPADC */ subchip->gpadc_page = i2c_new_dummy(client->adapter, - subchip->gpadc_page_addr); + subchip->gpadc_page_addr); if (subchip->gpadc_page == NULL) { ret = -ENODEV; goto out; } subchip->regmap_gpadc = devm_regmap_init_i2c(subchip->gpadc_page, - &pm80x_regmap_config); + &pm80x_regmap_config); if (IS_ERR(subchip->regmap_gpadc)) { ret = PTR_ERR(subchip->regmap_gpadc); dev_err(chip->dev, - "Failed to allocate regmap_gpadc: %d\n", ret); + "Failed to allocate regmap_gpadc: %d\n", ret); goto out; } i2c_set_clientdata(subchip->gpadc_page, chip); @@ -620,8 +618,7 @@ static int pm800_probe(struct i2c_client *client, chip = i2c_get_clientdata(client); /* init subchip for PM800 */ - subchip = - devm_kzalloc(&client->dev, sizeof(struct pm80x_subchip), + subchip = devm_kzalloc(&client->dev, sizeof(struct pm80x_subchip), GFP_KERNEL); if (!subchip) { ret = -ENOMEM; @@ -684,7 +681,7 @@ static struct i2c_driver pm800_driver = { .owner = THIS_MODULE, .pm = &pm80x_pm_ops, .of_match_table = pm80x_of_match_table, - }, + }, .probe = pm800_probe, .remove = pm800_remove, .id_table = pm80x_id_table, -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/