Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S932528AbbHYHv2 (ORCPT ); Tue, 25 Aug 2015 03:51:28 -0400 Received: from mail-wi0-f173.google.com ([209.85.212.173]:34776 "EHLO mail-wi0-f173.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S932450AbbHYHv0 (ORCPT ); Tue, 25 Aug 2015 03:51:26 -0400 Date: Tue, 25 Aug 2015 08:51:21 +0100 From: Lee Jones To: Vaibhav Hiremath Cc: linux-arm-kernel@lists.infradead.org, robh+dt@kernel.org, mturquette@baylibre.com, k.kozlowski@samsung.com, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-clk@vger.kernel.org Subject: Re: [PATCH-v2 1/5] mfd: 88pm800: Fix tabbing issue Message-ID: <20150825075121.GE19409@x1> References: <1440442594-3102-1-git-send-email-vaibhav.hiremath@linaro.org> <1440442594-3102-2-git-send-email-vaibhav.hiremath@linaro.org> MIME-Version: 1.0 Content-Type: text/plain; charset=utf-8 Content-Disposition: inline Content-Transfer-Encoding: 8bit In-Reply-To: <1440442594-3102-2-git-send-email-vaibhav.hiremath@linaro.org> User-Agent: Mutt/1.5.21 (2010-09-15) Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 9941 Lines: 314 On Tue, 25 Aug 2015, Vaibhav Hiremath wrote: > Driver had coding style issues where spaces were used instead > of tabs. This patch fixes them all. That's not all it's doing though is it? Please describe all of your changes. > Signed-off-by: Vaibhav Hiremath > --- > drivers/mfd/88pm800.c | 125 ++++++++++++++++++++++++-------------------------- > 1 file changed, 61 insertions(+), 64 deletions(-) > > diff --git a/drivers/mfd/88pm800.c b/drivers/mfd/88pm800.c > index f104a32..c4e097d 100644 > --- a/drivers/mfd/88pm800.c > +++ b/drivers/mfd/88pm800.c > @@ -30,55 +30,55 @@ > #include > > /* Interrupt Registers */ > -#define PM800_INT_STATUS1 (0x05) > +#define PM800_INT_STATUS1 0x05 > #define PM800_ONKEY_INT_STS1 (1 << 0) > #define PM800_EXTON_INT_STS1 (1 << 1) > -#define PM800_CHG_INT_STS1 (1 << 2) > -#define PM800_BAT_INT_STS1 (1 << 3) > -#define PM800_RTC_INT_STS1 (1 << 4) > +#define PM800_CHG_INT_STS1 (1 << 2) > +#define PM800_BAT_INT_STS1 (1 << 3) > +#define PM800_RTC_INT_STS1 (1 << 4) > #define PM800_CLASSD_OC_INT_STS1 (1 << 5) These should all be replaced by BIT(). Please fix the whole file. > -#define PM800_INT_STATUS2 (0x06) > +#define PM800_INT_STATUS2 0x06 > #define PM800_VBAT_INT_STS2 (1 << 0) > #define PM800_VSYS_INT_STS2 (1 << 1) > #define PM800_VCHG_INT_STS2 (1 << 2) > #define PM800_TINT_INT_STS2 (1 << 3) > -#define PM800_GPADC0_INT_STS2 (1 << 4) > +#define PM800_GPADC0_INT_STS2 (1 << 4) > #define PM800_TBAT_INT_STS2 (1 << 5) > -#define PM800_GPADC2_INT_STS2 (1 << 6) > -#define PM800_GPADC3_INT_STS2 (1 << 7) > +#define PM800_GPADC2_INT_STS2 (1 << 6) > +#define PM800_GPADC3_INT_STS2 (1 << 7) > > -#define PM800_INT_STATUS3 (0x07) > +#define PM800_INT_STATUS3 0x07 > > -#define PM800_INT_STATUS4 (0x08) > +#define PM800_INT_STATUS4 0x08 > #define PM800_GPIO0_INT_STS4 (1 << 0) > #define PM800_GPIO1_INT_STS4 (1 << 1) > #define PM800_GPIO2_INT_STS4 (1 << 2) > #define PM800_GPIO3_INT_STS4 (1 << 3) > #define PM800_GPIO4_INT_STS4 (1 << 4) > > -#define PM800_INT_ENA_1 (0x09) > +#define PM800_INT_ENA_1 0x09 > #define PM800_ONKEY_INT_ENA1 (1 << 0) > #define PM800_EXTON_INT_ENA1 (1 << 1) > -#define PM800_CHG_INT_ENA1 (1 << 2) > -#define PM800_BAT_INT_ENA1 (1 << 3) > -#define PM800_RTC_INT_ENA1 (1 << 4) > +#define PM800_CHG_INT_ENA1 (1 << 2) > +#define PM800_BAT_INT_ENA1 (1 << 3) > +#define PM800_RTC_INT_ENA1 (1 << 4) > #define PM800_CLASSD_OC_INT_ENA1 (1 << 5) > > -#define PM800_INT_ENA_2 (0x0A) > +#define PM800_INT_ENA_2 0x0A > #define PM800_VBAT_INT_ENA2 (1 << 0) > #define PM800_VSYS_INT_ENA2 (1 << 1) > #define PM800_VCHG_INT_ENA2 (1 << 2) > #define PM800_TINT_INT_ENA2 (1 << 3) > > -#define PM800_INT_ENA_3 (0x0B) > +#define PM800_INT_ENA_3 0x0B > #define PM800_GPADC0_INT_ENA3 (1 << 0) > #define PM800_GPADC1_INT_ENA3 (1 << 1) > #define PM800_GPADC2_INT_ENA3 (1 << 2) > #define PM800_GPADC3_INT_ENA3 (1 << 3) > #define PM800_GPADC4_INT_ENA3 (1 << 4) > > -#define PM800_INT_ENA_4 (0x0C) > +#define PM800_INT_ENA_4 0x0C > #define PM800_GPIO0_INT_ENA4 (1 << 0) > #define PM800_GPIO1_INT_ENA4 (1 << 1) > #define PM800_GPIO2_INT_ENA4 (1 << 2) > @@ -86,7 +86,7 @@ > #define PM800_GPIO4_INT_ENA4 (1 << 4) > > /* number of INT_ENA & INT_STATUS regs */ > -#define PM800_INT_REG_NUM (4) > +#define PM800_INT_REG_NUM 4 > > /* Interrupt Number in 88PM800 */ > enum { > @@ -114,7 +114,7 @@ enum { > }; > > /* PM800: generation identification number */ > -#define PM800_CHIP_GEN_ID_NUM 0x3 > +#define PM800_CHIP_GEN_ID_NUM 0x3 > > static const struct i2c_device_id pm80x_id_table[] = { > {"88PM800", 0}, > @@ -129,47 +129,47 @@ static const struct of_device_id pm80x_of_match_table[] = { > > static struct resource rtc_resources[] = { > { > - .name = "88pm80x-rtc", > - .start = PM800_IRQ_RTC, > - .end = PM800_IRQ_RTC, > - .flags = IORESOURCE_IRQ, > - }, > + .name = "88pm80x-rtc", > + .start = PM800_IRQ_RTC, > + .end = PM800_IRQ_RTC, > + .flags = IORESOURCE_IRQ, > + }, > }; > > static struct mfd_cell rtc_devs[] = { > { > - .name = "88pm80x-rtc", > - .of_compatible = "marvell,88pm80x-rtc", > - .num_resources = ARRAY_SIZE(rtc_resources), > - .resources = &rtc_resources[0], > - .id = -1, > - }, > + .name = "88pm80x-rtc", > + .of_compatible = "marvell,88pm80x-rtc", > + .num_resources = ARRAY_SIZE(rtc_resources), > + .resources = &rtc_resources[0], > + .id = -1, > + }, > }; > > static struct resource onkey_resources[] = { > { > - .name = "88pm80x-onkey", > - .start = PM800_IRQ_ONKEY, > - .end = PM800_IRQ_ONKEY, > - .flags = IORESOURCE_IRQ, > - }, > + .name = "88pm80x-onkey", > + .start = PM800_IRQ_ONKEY, > + .end = PM800_IRQ_ONKEY, > + .flags = IORESOURCE_IRQ, > + }, > }; > > static const struct mfd_cell onkey_devs[] = { > { > - .name = "88pm80x-onkey", > - .of_compatible = "marvell,88pm80x-onkey", > - .num_resources = 1, > - .resources = &onkey_resources[0], > - .id = -1, > - }, > + .name = "88pm80x-onkey", > + .of_compatible = "marvell,88pm80x-onkey", > + .num_resources = 1, > + .resources = &onkey_resources[0], > + .id = -1, > + }, > }; > > static const struct mfd_cell regulator_devs[] = { > { > - .name = "88pm80x-regulator", > - .of_compatible = "marvell,88pm80x-regulator", > - .id = -1, > + .name = "88pm80x-regulator", > + .of_compatible = "marvell,88pm80x-regulator", > + .id = -1, > }, > }; > > @@ -323,8 +323,8 @@ out: > static int device_onkey_init(struct pm80x_chip *chip) > { > return mfd_add_devices(chip->dev, 0, &onkey_devs[0], > - ARRAY_SIZE(onkey_devs), &onkey_resources[0], 0, > - NULL); > + ARRAY_SIZE(onkey_devs), &onkey_resources[0], 0, > + NULL); > } > > static int device_rtc_init(struct pm80x_chip *chip) > @@ -335,13 +335,13 @@ static int device_rtc_init(struct pm80x_chip *chip) > rtc_devs[0].pdata_size = pdata->rtc ? sizeof(struct pm80x_rtc_pdata) : 0; > > return mfd_add_devices(chip->dev, 0, &rtc_devs[0], > - ARRAY_SIZE(rtc_devs), NULL, 0, NULL); > + ARRAY_SIZE(rtc_devs), NULL, 0, NULL); > } > > static int device_regulator_init(struct pm80x_chip *chip) > { > return mfd_add_devices(chip->dev, 0, ®ulator_devs[0], > - ARRAY_SIZE(regulator_devs), NULL, 0, NULL); > + ARRAY_SIZE(regulator_devs), NULL, 0, NULL); > } > > static int device_irq_init_800(struct pm80x_chip *chip) > @@ -358,11 +358,10 @@ static int device_irq_init_800(struct pm80x_chip *chip) > > /* > * irq_clr_on_wr defines the way of clearing interrupt by > - * read/write(0/1). It's read-clear by default. > + * read/write(0/1). It's read-clear by default. > */ > - mask = > - PM800_WAKEUP2_INV_INT | PM800_WAKEUP2_INT_CLEAR | > - PM800_WAKEUP2_INT_MASK; > + mask = PM800_WAKEUP2_INV_INT | PM800_WAKEUP2_INT_CLEAR | > + PM800_WAKEUP2_INT_MASK; > > irq_clr_mode = pdata->irq_clr_method == PM800_IRQ_CLR_ON_WRITE ? > PM800_WAKEUP2_INT_WRITE_CLEAR : PM800_WAKEUP2_INT_READ_CLEAR; > @@ -371,9 +370,8 @@ static int device_irq_init_800(struct pm80x_chip *chip) > if (ret < 0) > goto out; > > - ret = > - regmap_add_irq_chip(chip->regmap, chip->irq, flags, -1, > - chip->regmap_irq_chip, &chip->irq_data); > + ret = regmap_add_irq_chip(chip->regmap, chip->irq, flags, -1, > + chip->regmap_irq_chip, &chip->irq_data); > > out: > return ret; > @@ -409,18 +407,18 @@ static int pm800_pages_init(struct pm80x_chip *chip) > > /* PM800 block power page */ > subchip->power_page = i2c_new_dummy(client->adapter, > - subchip->power_page_addr); > + subchip->power_page_addr); > if (subchip->power_page == NULL) { > ret = -ENODEV; > goto out; > } > > subchip->regmap_power = devm_regmap_init_i2c(subchip->power_page, > - &pm80x_regmap_config); > + &pm80x_regmap_config); > if (IS_ERR(subchip->regmap_power)) { > ret = PTR_ERR(subchip->regmap_power); > dev_err(chip->dev, > - "Failed to allocate regmap_power: %d\n", ret); > + "Failed to allocate regmap_power: %d\n", ret); > goto out; > } > > @@ -428,18 +426,18 @@ static int pm800_pages_init(struct pm80x_chip *chip) > > /* PM800 block GPADC */ > subchip->gpadc_page = i2c_new_dummy(client->adapter, > - subchip->gpadc_page_addr); > + subchip->gpadc_page_addr); > if (subchip->gpadc_page == NULL) { > ret = -ENODEV; > goto out; > } > > subchip->regmap_gpadc = devm_regmap_init_i2c(subchip->gpadc_page, > - &pm80x_regmap_config); > + &pm80x_regmap_config); > if (IS_ERR(subchip->regmap_gpadc)) { > ret = PTR_ERR(subchip->regmap_gpadc); > dev_err(chip->dev, > - "Failed to allocate regmap_gpadc: %d\n", ret); > + "Failed to allocate regmap_gpadc: %d\n", ret); > goto out; > } > i2c_set_clientdata(subchip->gpadc_page, chip); > @@ -620,8 +618,7 @@ static int pm800_probe(struct i2c_client *client, > chip = i2c_get_clientdata(client); > > /* init subchip for PM800 */ > - subchip = > - devm_kzalloc(&client->dev, sizeof(struct pm80x_subchip), > + subchip = devm_kzalloc(&client->dev, sizeof(struct pm80x_subchip), > GFP_KERNEL); > if (!subchip) { > ret = -ENOMEM; > @@ -684,7 +681,7 @@ static struct i2c_driver pm800_driver = { > .owner = THIS_MODULE, > .pm = &pm80x_pm_ops, > .of_match_table = pm80x_of_match_table, > - }, > + }, > .probe = pm800_probe, > .remove = pm800_remove, > .id_table = pm80x_id_table, -- Lee Jones Linaro STMicroelectronics Landing Team Lead Linaro.org │ Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/