Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1756037AbbHYUZv (ORCPT ); Tue, 25 Aug 2015 16:25:51 -0400 Received: from mail-pa0-f49.google.com ([209.85.220.49]:33590 "EHLO mail-pa0-f49.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751042AbbHYUZt (ORCPT ); Tue, 25 Aug 2015 16:25:49 -0400 Date: Tue, 25 Aug 2015 13:25:46 -0700 From: Brian Norris To: Stefan Agner Cc: dwmw2@infradead.org, sebastian@breakpoint.cc, robh+dt@kernel.org, pawel.moll@arm.com, mark.rutland@arm.com, ijc+devicetree@hellion.org.uk, galak@codeaurora.org, shawn.guo@linaro.org, kernel@pengutronix.de, boris.brezillon@free-electrons.com, marb@ixxat.de, aaron@tastycactus.com, bpringlemeir@gmail.com, linux-mtd@lists.infradead.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, albert.aribaud@3adev.fr, klimov.linux@gmail.com, Bill Pringlemeir Subject: Re: [PATCH v10 3/5] mtd: nand: vf610_nfc: add device tree bindings Message-ID: <20150825202546.GL81844@google.com> References: <1438594050-4595-1-git-send-email-stefan@agner.ch> <1438594050-4595-4-git-send-email-stefan@agner.ch> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <1438594050-4595-4-git-send-email-stefan@agner.ch> User-Agent: Mutt/1.5.21 (2010-09-15) Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 3393 Lines: 85 Sorry, I realized a potential issue here. On Mon, Aug 03, 2015 at 11:27:28AM +0200, Stefan Agner wrote: > Signed-off-by: Bill Pringlemeir > Acked-by: Shawn Guo > Reviewed-by: Brian Norris > Signed-off-by: Stefan Agner > --- > .../devicetree/bindings/mtd/vf610-nfc.txt | 45 ++++++++++++++++++++++ > 1 file changed, 45 insertions(+) > create mode 100644 Documentation/devicetree/bindings/mtd/vf610-nfc.txt > > diff --git a/Documentation/devicetree/bindings/mtd/vf610-nfc.txt b/Documentation/devicetree/bindings/mtd/vf610-nfc.txt > new file mode 100644 > index 0000000..cae5f25 > --- /dev/null > +++ b/Documentation/devicetree/bindings/mtd/vf610-nfc.txt > @@ -0,0 +1,45 @@ > +Freescale's NAND flash controller (NFC) > + > +This variant of the Freescale NAND flash controller (NFC) can be found on > +Vybrid (vf610), MPC5125, MCF54418 and Kinetis K70. > + > +Required properties: > +- compatible: Should be set to "fsl,vf610-nfc" > +- reg: address range of the NFC > +- interrupts: interrupt of the NFC > +- nand-bus-width: see nand.txt > +- nand-ecc-mode: see nand.txt > +- nand-on-flash-bbt: see nand.txt Stumbling across the "multi-CS" questions on the driver reminds me: it typically makes sense to define new NAND bindings using separate NAND *controller* and *flash* device nodes. The above 3 properties, at least, would apply on a per-flash basis, not per-controller typically. See sunxi-nand, for instance: http://lxr.free-electrons.com/source/Documentation/devicetree/bindings/mtd/sunxi-nand.txt brcmnand had a similar pattern: https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/tree/Documentation/devicetree/bindings/mtd/brcm,brcmnand.txt (Perhaps it's time we standardized this a little more formally...) > +- assigned-clocks: main clock from the SoC, for Vybrid <&clks VF610_CLK_NFC>; > +- assigned-clock-rates: The NAND bus timing is derived from this clock > + rate and should not exceed maximum timing for any NAND memory chip > + in a board stuffing. Typical NAND memory timings derived from this > + clock are found in the SoC hardware reference manual. Furthermore, > + there might be restrictions on maximum rates when using hardware ECC. > + > +- #address-cells, #size-cells : Must be present if the device has sub-nodes > + representing partitions. > + > +Required properties for hardware ECC: > +- nand-ecc-strength: supported strengths are 24 and 32 bit (see nand.txt) > +- nand-ecc-step-size: step size equals page size, currently only 2k pages are > + supported > + > +Example: > + > + nfc: nand@400e0000 { > + compatible = "fsl,vf610-nfc"; > + #address-cells = <1>; > + #size-cells = <1>; > + reg = <0x400e0000 0x4000>; > + interrupts = ; > + clocks = <&clks VF610_CLK_NFC>; > + clock-names = "nfc"; > + assigned-clocks = <&clks VF610_CLK_NFC>; > + assigned-clock-rates = <33000000>; > + nand-bus-width = <8>; > + nand-ecc-mode = "hw"; > + nand-ecc-strength = <32>; > + nand-ecc-step-size = <2048>; > + nand-on-flash-bbt; > + }; Brian -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/