Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1756232AbbHZGmf (ORCPT ); Wed, 26 Aug 2015 02:42:35 -0400 Received: from mail-wi0-f196.google.com ([209.85.212.196]:34519 "EHLO mail-wi0-f196.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753048AbbHZGmc (ORCPT ); Wed, 26 Aug 2015 02:42:32 -0400 MIME-Version: 1.0 In-Reply-To: <1440149281-26336-11-git-send-email-alim.akhtar@samsung.com> References: <1440149281-26336-1-git-send-email-alim.akhtar@samsung.com> <1440149281-26336-11-git-send-email-alim.akhtar@samsung.com> Date: Wed, 26 Aug 2015 12:12:30 +0530 X-Google-Sender-Auth: ZWM7EW150Nx-bN8cop4YLBhuTuA Message-ID: Subject: Re: [PATCH 10/10] scsi: ufs-exynos: add UFS host support for Exynos SoCs From: amit daniel kachhap To: Alim Akhtar Cc: linux-scsi@vger.kernel.org, "linux-kernel@vger.kernel.org" , vinholikatti@gmail.com, JBottomley@odin.com, Seungwon Jeon Content-Type: text/plain; charset=UTF-8 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 88203 Lines: 2182 On Fri, Aug 21, 2015 at 2:58 PM, Alim Akhtar wrote: > From: Seungwon Jeon > > This patch introduces Exynos UFS host controller driver, > which mainly handles vendor-specific operations including > link startup, power mode change and hibernation/unhibernation. > > Signed-off-by: Seungwon Jeon > Signed-off-by: Alim Akhtar > --- > .../devicetree/bindings/ufs/ufs-exynos.txt | 92 ++ > drivers/scsi/ufs/Kconfig | 12 + > drivers/scsi/ufs/Makefile | 1 + > drivers/scsi/ufs/ufs-exynos-hw.c | 147 +++ > drivers/scsi/ufs/ufs-exynos-hw.h | 43 + > drivers/scsi/ufs/ufs-exynos.c | 1175 ++++++++++++++++++++ > drivers/scsi/ufs/ufs-exynos.h | 463 ++++++++ > drivers/scsi/ufs/ufshci.h | 26 +- > drivers/scsi/ufs/unipro.h | 47 + > 9 files changed, 2005 insertions(+), 1 deletion(-) > create mode 100644 Documentation/devicetree/bindings/ufs/ufs-exynos.txt > create mode 100644 drivers/scsi/ufs/ufs-exynos-hw.c > create mode 100644 drivers/scsi/ufs/ufs-exynos-hw.h > create mode 100644 drivers/scsi/ufs/ufs-exynos.c > create mode 100644 drivers/scsi/ufs/ufs-exynos.h > > diff --git a/Documentation/devicetree/bindings/ufs/ufs-exynos.txt b/Documentation/devicetree/bindings/ufs/ufs-exynos.txt > new file mode 100644 > index 0000000..1a6184d > --- /dev/null > +++ b/Documentation/devicetree/bindings/ufs/ufs-exynos.txt > @@ -0,0 +1,92 @@ > +* Exynos Universal Flash Storage (UFS) Host Controller > + > +UFSHC nodes are defined to describe on-chip UFS host controllers. > +Each UFS controller instance should have its own node. > + > +Required properties: > +- compatible : compatible list, contains "samsung,exynos7-ufs" > +- interrupts : > +- reg : > + > +Optional properties: > +- vdd-hba-supply : phandle to UFS host controller supply regulator node > +- vcc-supply : phandle to VCC supply regulator node > +- vccq-supply : phandle to VCCQ supply regulator node > +- vccq2-supply : phandle to VCCQ2 supply regulator node > +- vcc-supply-1p8 : For embedded UFS devices, valid VCC range is 1.7-1.95V > + or 2.7-3.6V. This boolean property when set, specifies > + to use low voltage range of 1.7-1.95V. Note for external > + UFS cards this property is invalid and valid VCC range is > + always 2.7-3.6V. > +- vcc-max-microamp : specifies max. load that can be drawn from vcc supply > +- vccq-max-microamp : specifies max. load that can be drawn from vccq supply > +- vccq2-max-microamp : specifies max. load that can be drawn from vccq2 supply > +- -fixed-regulator : boolean property specifying that -supply is a fixed regulator > + > +- clocks : List of phandle and clock specifier pairs > +- clock-names : List of clock input name strings sorted in the same > + order as the clocks property. > +- freq-table-hz : Array of operating frequencies stored in the same > + order as the clocks property. If this property is not > + defined or a value in the array is "0" then it is assumed > + that the frequency is set by the parent clock or a > + fixed rate clock source. > +- pclk-freq-avail-range : specifies available frequency range(min/max) for APB clock > +- ufs,pwr-attr-mode : specifies mode value for power mode change > +- ufs,pwr-attr-lane : specifies lane count value for power mode change > +- ufs,pwr-attr-gear : specifies gear count value for power mode change > +- ufs,pwr-attr-hs-series : specifies HS rate series for power mode change > +- ufs,pwr-local-l2-timer : specifies array of local UNIPRO L2 timer values > + > +- ufs,pwr-remote-l2-timer : specifies array of remote UNIPR L2 timer values s/UNIPR/UNIPRO > + > +- ufs-rx-adv-fine-gran-sup_en : specifies support of fine granularity of MPHY I suppose this field is bool type. This can be mentioned here. > +- ufs-rx-adv-fine-gran-step : specifies granularity steps of MPHY > +- ufs-rx-adv-min-activate-time-cap : specifies rx advanced minimum activate time of MPHY > +- ufs-pa-granularity : specifies Granularity for PA_TActivate and PA_Hibern8Time > +- ufs-pa-tacctivate : specifies time wake-up remote M-RX > +- ufs-pa-hibern8time : specifies minimum time to wait in HIBERN8 state > + > +Note: If above properties are not defined it can be assumed that the supply > +regulators or clocks are always on. > + > +Example: > + ufshc@0x15570000 { > + compatible = "samsung,exynos7-ufs"; > + reg = <0xfc598000 0x800>; > + reg = <0x15570000 0x100>, > + <0x15570100 0x100>, > + <0x15571000 0x200>, > + <0x15572000 0x300>; > + reg-names = "hci", "vs_hci", "unipro", "ufsp"; > + interrupts = <0 200 0>; > + > + vdd-hba-supply = <&xxx_reg0>; > + vdd-hba-fixed-regulator; > + vcc-supply = <&xxx_reg1>; > + vcc-supply-1p8; > + vccq-supply = <&xxx_reg2>; > + vccq2-supply = <&xxx_reg3>; > + vcc-max-microamp = 500000; > + vccq-max-microamp = 200000; > + vccq2-max-microamp = 200000; > + > + clocks = <&core 0>, <&ref 0>, <&iface 0>; > + clock-names = "core_clk", "ref_clk", "iface_clk"; > + freq-table-hz = <100000000 200000000>, <0 0>, <0 0>; > + > + pclk-freq-avail-range = <70000000 133000000>; > + > + ufs,pwr-attr-mode = "FAST"; > + ufs,pwr-attr-lane = /bits/ 8 <2>; > + ufs,pwr-attr-gear = /bits/ 8 <2>; > + ufs,pwr-attr-hs-series = "HS_rate_b"; > + ufs,pwr-local-l2-timer = <8000 28000 20000>; > + ufs,pwr-remote-l2-timer = <12000 32000 16000>; > + ufs-rx-adv-fine-gran-sup_en = <1>; > + ufs-rx-adv-fine-gran-step = <3>; > + ufs-rx-adv-min-activate-time-cap = <10>; > + ufs-pa-granularity = <6>; > + ufs-pa-tacctivate = <6>; > + ufs-pa-hibern8time = <20>; > + }; > diff --git a/drivers/scsi/ufs/Kconfig b/drivers/scsi/ufs/Kconfig > index e945383..14544d6 100644 > --- a/drivers/scsi/ufs/Kconfig > +++ b/drivers/scsi/ufs/Kconfig > @@ -83,3 +83,15 @@ config SCSI_UFS_QCOM > > Select this if you have UFS controller on QCOM chipset. > If unsure, say N. > + > +config SCSI_UFS_EXYNOS > + bool "EXYNOS specific hooks to UFS controller platform driver" > + depends on SCSI_UFSHCD_PLATFORM && ARCH_EXYNOS > + select PHY_EXYNOS_UFS > + help > + This selects the EXYNOS specific additions to UFSHCD platform driver. > + UFS host on EXYNOS includes HCI and UNIPRO layer, and associates with > + UFS-PHY driver. > + > + Select this if you have UFS host controller on EXYNOS chipset. > + If unsure, say N. > diff --git a/drivers/scsi/ufs/Makefile b/drivers/scsi/ufs/Makefile > index 8303bcc..2accf1e 100644 > --- a/drivers/scsi/ufs/Makefile > +++ b/drivers/scsi/ufs/Makefile > @@ -1,5 +1,6 @@ > # UFSHCD makefile > obj-$(CONFIG_SCSI_UFS_QCOM) += ufs-qcom.o > +obj-$(CONFIG_SCSI_UFS_EXYNOS) += ufs-exynos.o ufs-exynos-hw.o > obj-$(CONFIG_SCSI_UFSHCD) += ufshcd.o > obj-$(CONFIG_SCSI_UFSHCD_PCI) += ufshcd-pci.o > obj-$(CONFIG_SCSI_UFSHCD_PLATFORM) += ufshcd-pltfrm.o > diff --git a/drivers/scsi/ufs/ufs-exynos-hw.c b/drivers/scsi/ufs/ufs-exynos-hw.c > new file mode 100644 > index 0000000..c18e45f > --- /dev/null > +++ b/drivers/scsi/ufs/ufs-exynos-hw.c > @@ -0,0 +1,147 @@ > +/* > + * UFS Host Controller driver for Exynos specific extensions > + * > + * Copyright (C) 2014-2015 Samsung Electronics Co., Ltd. > + * Author: Seungwon Jeon > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License as published by > + * the Free Software Foundation; either version 2 of the License, or > + * (at your option) any later version. > + */ > + > +#include "ufshcd.h" > +#include "unipro.h" > +#include "ufs-exynos.h" > +#include "ufs-exynos-hw.h" The headers can be sorted here. > + > +static int ufs_clk_set_parent(struct device *dev, const char *c, const char *p) > +{ > + struct clk *_c, *_p; > + > + _c = devm_clk_get(dev, c); > + if (IS_ERR(_c)) { > + dev_err(dev, "failed to get clock %s\n", c); > + return -EINVAL; > + } > + > + _p = devm_clk_get(dev, p); > + if (IS_ERR(_p)) { > + dev_err(dev, "failed to get clock %s\n", p); > + return -EINVAL; > + } > + > + return clk_set_parent(_c, _p); > +} > + > +static int exynos7_ufs_drv_init(struct device *dev, struct exynos_ufs *ufs) > +{ > + int ret; > + const char *const clks[] = { > + "mout_sclk_combo_phy_embedded", > + "top_sclk_phy_fsys1_26m", > + }; > + > + ret = ufs_clk_set_parent(dev, clks[0], clks[1]); > + if (ret) > + dev_err(dev, "failed to set parent %s of clock %s\n", > + clks[1], clks[0]); > + > + return ret; > +} > + > +static int exynos7_ufs_pre_link(struct exynos_ufs *ufs) > +{ > + struct ufs_hba *hba = ufs->hba; > + u32 val = ufs->drv_data->uic_attr->pa_dbg_option_suite; > + int i; > + > + exynos_ufs_enable_ov_tm(hba); > + for_each_ufs_tx_lane(ufs, i) > + ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0x297, i), 0x17); > + for_each_ufs_rx_lane(ufs, i) { > + ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0x362, i), 0xff); > + ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0x363, i), 0x00); > + } > + exynos_ufs_disable_ov_tm(hba); > + > + ufshcd_dme_set(hba, UIC_ARG_MIB(PA_DBG_OPTION_SUITE_DYN), 0xf); > + ufshcd_dme_set(hba, UIC_ARG_MIB(PA_DBG_OPTION_SUITE_DYN), 0xf); > + for_each_ufs_tx_lane(ufs, i) > + ufshcd_dme_set(hba, > + UIC_ARG_MIB_SEL(TX_HIBERN8_CONTROL, i), 0x0); > + ufshcd_dme_set(hba, UIC_ARG_MIB(PA_DBG_TXPHY_CFGUPDT), 0x1); > + udelay(1); > + ufshcd_dme_set(hba, UIC_ARG_MIB(PA_DBG_OPTION_SUITE), val | (1 << 12)); > + ufshcd_dme_set(hba, UIC_ARG_MIB(PA_DBG_SKIP_RESET_PHY), 0x1); > + ufshcd_dme_set(hba, UIC_ARG_MIB(PA_DBG_SKIP_LINE_RESET), 0x1); > + ufshcd_dme_set(hba, UIC_ARG_MIB(PA_DBG_LINE_RESET_REQ), 0x1); > + udelay(1600); > + ufshcd_dme_set(hba, UIC_ARG_MIB(PA_DBG_OPTION_SUITE), val); > + > + return 0; > +} > + > +static int exynos7_ufs_post_link(struct exynos_ufs *ufs) > +{ > + struct ufs_hba *hba = ufs->hba; > + int i; > + > + exynos_ufs_enable_ov_tm(hba); > + for_each_ufs_tx_lane(ufs, i) { > + ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0x28b, i), 0x83); > + ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0x29a, i), 0x07); > + ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0x277, i), > + TX_LINERESET_N(exynos_ufs_calc_time_cntr(ufs, 200000))); > + } > + exynos_ufs_disable_ov_tm(hba); > + > + exynos_ufs_enable_dbg_mode(hba); > + ufshcd_dme_set(hba, UIC_ARG_MIB(PA_SAVECONFIGTIME), 0xbb8); > + exynos_ufs_disable_dbg_mode(hba); > + > + return 0; > +} > + > +static int exynos7_ufs_pre_pwr_change(struct exynos_ufs *ufs, > + struct uic_pwr_mode *pwr) > +{ > + unipro_writel(ufs, 0x22, UNIPRO_DBG_FORCE_DME_CTRL_STATE); > + > + return 0; > +} > + > +static int exynos7_ufs_post_pwr_change(struct exynos_ufs *ufs, > + struct uic_pwr_mode *pwr) > +{ > + struct ufs_hba *hba = ufs->hba; > + > + ufshcd_dme_set(hba, UIC_ARG_MIB(PA_DBG_RXPHY_CFGUPDT), 0x1); > + > + if (pwr->lane == 1) { > + exynos_ufs_enable_dbg_mode(hba); > + ufshcd_dme_set(hba, UIC_ARG_MIB(PA_CONNECTEDTXDATALANES), 0x1); > + exynos_ufs_disable_dbg_mode(hba); > + } > + > + return 0; > +} > + > +struct exynos_ufs_drv_data exynos_ufs_drvs[] = { > +{ > + .compatible = "samsung,exynos7-ufs", > + .uic_attr = &exynos7_uic_attr, > + .quirks = UFSHCI_QUIRK_BROKEN_UTRD | > + UFSHCI_QUIRK_BROKEN_REQ_LIST_CLR | > + UFSHCI_QUIRK_BROKEN_HCE | > + UFSHCI_QUIRK_BROKEN_RESET_INTR_AGGR, > + .opts = EXYNOS_UFS_OPT_HAS_APB_CLK_CTRL | > + EXYNOS_UFS_OPT_BROKEN_AUTO_CLK_CTRL | > + EXYNOS_UFS_OPT_BROKEN_RX_SEL_IDX, > + .drv_init = exynos7_ufs_drv_init, > + .pre_link = exynos7_ufs_pre_link, > + .post_link = exynos7_ufs_post_link, > + .pre_pwr_change = exynos7_ufs_pre_pwr_change, > + .post_pwr_change = exynos7_ufs_post_pwr_change, > +}, { > +}, }; > diff --git a/drivers/scsi/ufs/ufs-exynos-hw.h b/drivers/scsi/ufs/ufs-exynos-hw.h > new file mode 100644 > index 0000000..8464ec8 > --- /dev/null > +++ b/drivers/scsi/ufs/ufs-exynos-hw.h > @@ -0,0 +1,43 @@ > +/* > + * UFS Host Controller driver for Exynos specific extensions > + * > + * Copyright (C) 2014-2015 Samsung Electronics Co., Ltd. > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License as published by > + * the Free Software Foundation; either version 2 of the License, or > + * (at your option) any later version. > + */ > + > +#ifndef _UFS_EXYNOS_HW_H_ > +#define _UFS_EXYNOS_HW_H_ > + > +#include "ufs-exynos.h" > +#include "unipro.h" > + > +static struct exynos_ufs_uic_attr exynos7_uic_attr = { > + .tx_trailingclks = 0x10, This can be shown in decimal as others below. > + .tx_dif_p_nsec = 3000000, /* unit: ns */ > + .tx_dif_n_nsec = 1000000, /* unit: ns */ > + .tx_high_z_cnt_nsec = 20000, /* unit: ns */ > + .tx_base_unit_nsec = 100000, /* unit: ns */ > + .tx_gran_unit_nsec = 4000, /* unit: ns */ > + .tx_sleep_cnt = 1000, /* unit: ns */ > + .tx_min_activatetime = 0xa, same as above. > + .rx_filler_enable = 0x2, > + .rx_dif_p_nsec = 1000000, /* unit: ns */ > + .rx_hibern8_wait_nsec = 4000000, /* unit: ns */ > + .rx_base_unit_nsec = 100000, /* unit: ns */ > + .rx_gran_unit_nsec = 4000, /* unit: ns */ > + .rx_sleep_cnt = 1280, /* unit: ns */ > + .rx_stall_cnt = 320, /* unit: ns */ > + .rx_hs_g1_sync_len_cap = SYNC_LEN_COARSE(0xf), > + .rx_hs_g2_sync_len_cap = SYNC_LEN_COARSE(0xf), > + .rx_hs_g3_sync_len_cap = SYNC_LEN_COARSE(0xf), > + .rx_hs_g1_prep_sync_len_cap = PREP_LEN(0xf), > + .rx_hs_g2_prep_sync_len_cap = PREP_LEN(0xf), > + .rx_hs_g3_prep_sync_len_cap = PREP_LEN(0xf), > + .pa_dbg_option_suite = 0x30103, > +}; > + > +#endif /* _UFS_EXYNOS_HW_H_ */ > diff --git a/drivers/scsi/ufs/ufs-exynos.c b/drivers/scsi/ufs/ufs-exynos.c > new file mode 100644 > index 0000000..df2804e > --- /dev/null > +++ b/drivers/scsi/ufs/ufs-exynos.c > @@ -0,0 +1,1175 @@ > +/* > + * UFS Host Controller driver for Exynos specific extensions > + * > + * Copyright (C) 2014-2015 Samsung Electronics Co., Ltd. > + * Author: Seungwon Jeon > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License as published by > + * the Free Software Foundation; either version 2 of the License, or > + * (at your option) any later version. > + */ > + > +#include > +#include > +#include > +#include > +#include > +#include > + > +#include "ufshcd.h" > +#include "unipro.h" > +#include "ufs-exynos.h" These headers can be sorted. > + > +#define IATOVAL_NSEC 20000 /* unit: ns */ > +#define UNIPRO_PCLK_PERIOD(ufs) (NSEC_PER_SEC / ufs->pclk_rate) > + > +static void exynos_ufs_auto_ctrl_hcc(struct exynos_ufs *ufs, bool en); > +static void exynos_ufs_ctrl_clkstop(struct exynos_ufs *ufs, bool en); > + > +static inline struct exynos_ufs *to_exynos_ufs(struct ufs_hba *hba) > +{ > + return hba->priv; > +} > + > +static inline void exynos_ufs_enable_auto_ctrl_hcc(struct exynos_ufs *ufs) > +{ > + exynos_ufs_auto_ctrl_hcc(ufs, true); > +} > + > +static inline void exynos_ufs_disable_auto_ctrl_hcc(struct exynos_ufs *ufs) > +{ > + exynos_ufs_auto_ctrl_hcc(ufs, false); > +} > + > +static inline void exynos_ufs_disable_auto_ctrl_hcc_save( > + struct exynos_ufs *ufs, u32 *val) > +{ > + *val = hci_readl(ufs, HCI_MISC); > + exynos_ufs_auto_ctrl_hcc(ufs, false); > +} > + > +static inline void exynos_ufs_auto_ctrl_hcc_restore( > + struct exynos_ufs *ufs, u32 *val) > +{ > + hci_writel(ufs, *val, HCI_MISC); > +} > + > +static inline void exynos_ufs_gate_clks(struct exynos_ufs *ufs) > +{ > + exynos_ufs_ctrl_clkstop(ufs, true); > +} > + > +static inline void exynos_ufs_ungate_clks(struct exynos_ufs *ufs) > +{ > + exynos_ufs_ctrl_clkstop(ufs, false); > +} > + > +/** > + * exynos_ufs_auto_ctrl_hcc - HCI core clock control by h/w > + * Control should be disabled in the below cases > + * - Before host controller S/W reset > + * - Access to UFS protector's register > + */ > +void exynos_ufs_auto_ctrl_hcc(struct exynos_ufs *ufs, bool en) This function can me made static so as to make it consistent with others. Although they are declared static above. > +{ > + u32 misc = hci_readl(ufs, HCI_MISC); > + > + if (en) > + hci_writel(ufs, misc | HCI_CORECLK_CTRL_EN, HCI_MISC); > + else > + hci_writel(ufs, misc & ~HCI_CORECLK_CTRL_EN, HCI_MISC); > +} > + > +void exynos_ufs_ctrl_clkstop(struct exynos_ufs *ufs, bool en) same as above. > +{ > + u32 ctrl = hci_readl(ufs, HCI_CLKSTOP_CTRL); > + u32 misc = hci_readl(ufs, HCI_MISC); > + > + if (en) { > + hci_writel(ufs, misc | CLK_CTRL_EN_MASK, HCI_MISC); > + hci_writel(ufs, ctrl | CLK_STOP_MASK, HCI_CLKSTOP_CTRL); > + } else { > + hci_writel(ufs, ctrl & ~CLK_STOP_MASK, HCI_CLKSTOP_CTRL); > + hci_writel(ufs, misc & ~CLK_CTRL_EN_MASK, HCI_MISC); > + } > +} > + > +static int exynos_ufs_get_clk_info(struct exynos_ufs *ufs) > +{ > + struct ufs_hba *hba = ufs->hba; > + struct list_head *head = &hba->clk_list_head; > + struct ufs_clk_info *clki; > + u32 pclk_rate; > + u32 f_min, f_max; > + u8 div = 0; > + int ret = 0; > + > + if (!head || list_empty(head)) > + goto out; > + > + list_for_each_entry(clki, head, list) { > + if (!IS_ERR_OR_NULL(clki->clk)) { > + if (!strcmp(clki->name, "aclk_ufs")) > + ufs->clk_hci_core = clki->clk; > + else if (!strcmp(clki->name, "sclk_unipro_apb")) > + ufs->clk_apb = clki->clk; > + else if (!strcmp(clki->name, "sclk_unipro_main")) > + ufs->clk_unipro_main = clki->clk; > + } > + } > + > + if (!ufs->clk_hci_core || !ufs->clk_unipro_main || !ufs->clk_apb) { > + dev_err(hba->dev, "failed to get clk info\n"); > + ret = -EINVAL; > + goto out; > + } > + > + ufs->mclk_rate = clk_get_rate(ufs->clk_unipro_main); Some if checks for the clocks can be given as ufs->clk_unipro_main is undefined for some cases. > + pclk_rate = clk_get_rate(ufs->clk_apb); Same as above. > + f_min = ufs->pclk_avail_min; > + f_max = ufs->pclk_avail_max; > + > + if (ufs->opts & EXYNOS_UFS_OPT_HAS_APB_CLK_CTRL) { Some cases can occur where pclk_rate can be 0. From the code looks like only pclk or ufs->clk_apb is must. Check the purpose of other clocks. > + do { > + pclk_rate /= (div + 1); > + > + if (pclk_rate <= f_max) > + break; > + div++; > + } while (pclk_rate >= f_min); > + } > + > + if (unlikely(pclk_rate < f_min || pclk_rate > f_max)) { > + dev_err(hba->dev, "not available pclk range %d\n", pclk_rate); > + ret = -EINVAL; > + goto out; > + } > + > + ufs->pclk_rate = pclk_rate; > + ufs->pclk_div = div; > + > +out: > + return ret; > +} > + > +static void exynos_ufs_set_unipro_pclk_div(struct exynos_ufs *ufs) > +{ > + if (ufs->opts & EXYNOS_UFS_OPT_HAS_APB_CLK_CTRL) { > + u32 val; > + > + val = hci_readl(ufs, HCI_UNIPRO_APB_CLK_CTRL); > + hci_writel(ufs, UNIPRO_APB_CLK(val, ufs->pclk_div), > + HCI_UNIPRO_APB_CLK_CTRL); > + } > +} > + > +static void exynos_ufs_set_pwm_clk_div(struct exynos_ufs *ufs) > +{ > + struct ufs_hba *hba = ufs->hba; > + struct exynos_ufs_uic_attr *attr = ufs->drv_data->uic_attr; > + > + ufshcd_dme_set(hba, > + UIC_ARG_MIB(CMN_PWM_CLK_CTRL), attr->cmn_pwm_clk_ctrl); > +} > + > +static void exynos_ufs_calc_pwm_clk_div(struct exynos_ufs *ufs) > +{ > + struct ufs_hba *hba = ufs->hba; > + struct exynos_ufs_uic_attr *attr = ufs->drv_data->uic_attr; > + const unsigned int div = 30, mult = 20; > + const unsigned long pwm_min = 3 * 1000 * 1000; > + const unsigned long pwm_max = 9 * 1000 * 1000; > + const int divs[] = {32, 16, 8, 4}; > + unsigned long clk = 0, _clk, clk_period; > + int i = 0, clk_idx = -1; > + > + clk_period = UNIPRO_PCLK_PERIOD(ufs); > + for (i = 0; i < ARRAY_SIZE(divs); i++) { > + _clk = NSEC_PER_SEC * mult / (clk_period * divs[i] * div); > + if (_clk >= pwm_min && _clk <= pwm_max) { > + if (_clk > clk) { > + clk_idx = i; > + clk = _clk; > + } > + } > + } > + > + if (clk_idx == -1) { > + ufshcd_dme_get(hba, UIC_ARG_MIB(CMN_PWM_CLK_CTRL), &clk_idx); > + dev_err(hba->dev, > + "failed to decide pwm clock divider, will not change\n"); > + } > + > + attr->cmn_pwm_clk_ctrl = clk_idx & PWM_CLK_CTRL_MASK; > +} > + > +long exynos_ufs_calc_time_cntr(struct exynos_ufs *ufs, long period) > +{ > + const int precise = 10; > + long pclk_rate = ufs->pclk_rate; > + long clk_period, fraction; > + > + clk_period = UNIPRO_PCLK_PERIOD(ufs); > + fraction = ((NSEC_PER_SEC % pclk_rate) * precise) / pclk_rate; > + > + return (period * precise) / ((clk_period * precise) + fraction); > +} > + > +static void exynos_ufs_specify_phy_time_attr(struct exynos_ufs *ufs) > +{ > + struct exynos_ufs_uic_attr *attr = ufs->drv_data->uic_attr; > + struct ufs_phy_time_cfg *t_cfg = &ufs->t_cfg; > + > + t_cfg->tx_linereset_p = > + exynos_ufs_calc_time_cntr(ufs, attr->tx_dif_p_nsec); > + t_cfg->tx_linereset_n = > + exynos_ufs_calc_time_cntr(ufs, attr->tx_dif_n_nsec); > + t_cfg->tx_high_z_cnt = > + exynos_ufs_calc_time_cntr(ufs, attr->tx_high_z_cnt_nsec); > + t_cfg->tx_base_n_val = > + exynos_ufs_calc_time_cntr(ufs, attr->tx_base_unit_nsec); > + t_cfg->tx_gran_n_val = > + exynos_ufs_calc_time_cntr(ufs, attr->tx_gran_unit_nsec); > + t_cfg->tx_sleep_cnt = > + exynos_ufs_calc_time_cntr(ufs, attr->tx_sleep_cnt); > + > + t_cfg->rx_linereset = > + exynos_ufs_calc_time_cntr(ufs, attr->rx_dif_p_nsec); > + t_cfg->rx_hibern8_wait = > + exynos_ufs_calc_time_cntr(ufs, attr->rx_hibern8_wait_nsec); > + t_cfg->rx_base_n_val = > + exynos_ufs_calc_time_cntr(ufs, attr->rx_base_unit_nsec); > + t_cfg->rx_gran_n_val = > + exynos_ufs_calc_time_cntr(ufs, attr->rx_gran_unit_nsec); > + t_cfg->rx_sleep_cnt = > + exynos_ufs_calc_time_cntr(ufs, attr->rx_sleep_cnt); > + t_cfg->rx_stall_cnt = > + exynos_ufs_calc_time_cntr(ufs, attr->rx_stall_cnt); > +} > + > +static void exynos_ufs_config_phy_time_attr(struct exynos_ufs *ufs) > +{ > + struct ufs_hba *hba = ufs->hba; > + struct ufs_phy_time_cfg *t_cfg = &ufs->t_cfg; > + int i; > + > + exynos_ufs_set_pwm_clk_div(ufs); > + > + exynos_ufs_enable_ov_tm(hba); > + > + for_each_ufs_rx_lane(ufs, i) { > + ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(RX_FILLER_ENABLE, i), > + ufs->drv_data->uic_attr->rx_filler_enable); > + ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(RX_LINERESET_VAL, i), > + RX_LINERESET(t_cfg->rx_linereset)); > + ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(RX_BASE_NVAL_07_00, i), > + RX_BASE_NVAL_L(t_cfg->rx_base_n_val)); > + ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(RX_BASE_NVAL_15_08, i), > + RX_BASE_NVAL_H(t_cfg->rx_base_n_val)); > + ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(RX_GRAN_NVAL_07_00, i), > + RX_GRAN_NVAL_L(t_cfg->rx_gran_n_val)); > + ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(RX_GRAN_NVAL_10_08, i), > + RX_GRAN_NVAL_H(t_cfg->rx_gran_n_val)); > + ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(RX_OV_SLEEP_CNT_TIMER, i), > + RX_OV_SLEEP_CNT(t_cfg->rx_sleep_cnt)); > + ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(RX_OV_STALL_CNT_TIMER, i), > + RX_OV_STALL_CNT(t_cfg->rx_stall_cnt)); > + } > + > + for_each_ufs_tx_lane(ufs, i) { > + ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(TX_LINERESET_P_VAL, i), > + TX_LINERESET_P(t_cfg->tx_linereset_p)); > + ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(TX_HIGH_Z_CNT_07_00, i), > + TX_HIGH_Z_CNT_L(t_cfg->tx_high_z_cnt)); > + ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(TX_HIGH_Z_CNT_11_08, i), > + TX_HIGH_Z_CNT_H(t_cfg->tx_high_z_cnt)); > + ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(TX_BASE_NVAL_07_00, i), > + TX_BASE_NVAL_L(t_cfg->tx_base_n_val)); > + ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(TX_BASE_NVAL_15_08, i), > + TX_BASE_NVAL_H(t_cfg->tx_base_n_val)); > + ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(TX_GRAN_NVAL_07_00, i), > + TX_GRAN_NVAL_L(t_cfg->tx_gran_n_val)); > + ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(TX_GRAN_NVAL_10_08, i), > + TX_GRAN_NVAL_H(t_cfg->tx_gran_n_val)); > + ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(TX_OV_SLEEP_CNT_TIMER, i), > + TX_OV_H8_ENTER_EN | > + TX_OV_SLEEP_CNT(t_cfg->tx_sleep_cnt)); > + ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(TX_MIN_ACTIVATETIME, i), > + ufs->drv_data->uic_attr->tx_min_activatetime); > + } > + > + exynos_ufs_disable_ov_tm(hba); > +} > + > +static void exynos_ufs_config_phy_cap_attr(struct exynos_ufs *ufs) > +{ > + struct ufs_hba *hba = ufs->hba; > + struct exynos_ufs_uic_attr *attr = ufs->drv_data->uic_attr; > + int i; > + > + exynos_ufs_enable_ov_tm(hba); > + > + for_each_ufs_rx_lane(ufs, i) { > + ufshcd_dme_set(hba, > + UIC_ARG_MIB_SEL(RX_HS_G1_SYNC_LENGTH_CAP, i), > + attr->rx_hs_g1_sync_len_cap); > + ufshcd_dme_set(hba, > + UIC_ARG_MIB_SEL(RX_HS_G2_SYNC_LENGTH_CAP, i), > + attr->rx_hs_g2_sync_len_cap); > + ufshcd_dme_set(hba, > + UIC_ARG_MIB_SEL(RX_HS_G3_SYNC_LENGTH_CAP, i), > + attr->rx_hs_g3_sync_len_cap); > + ufshcd_dme_set(hba, > + UIC_ARG_MIB_SEL(RX_HS_G1_PREP_LENGTH_CAP, i), > + attr->rx_hs_g1_prep_sync_len_cap); > + ufshcd_dme_set(hba, > + UIC_ARG_MIB_SEL(RX_HS_G2_PREP_LENGTH_CAP, i), > + attr->rx_hs_g2_prep_sync_len_cap); > + ufshcd_dme_set(hba, > + UIC_ARG_MIB_SEL(RX_HS_G3_PREP_LENGTH_CAP, i), > + attr->rx_hs_g3_prep_sync_len_cap); > + } > + > + if (attr->rx_adv_fine_gran_sup_en == 0) { > + for_each_ufs_rx_lane(ufs, i) { > + ufshcd_dme_set(hba, > + UIC_ARG_MIB_SEL(RX_ADV_GRANULARITY_CAP, i), 0); > + > + if (attr->rx_min_actv_time_cap) > + ufshcd_dme_set(hba, > + UIC_ARG_MIB_SEL(RX_MIN_ACTIVATETIME_CAP, i), > + attr->rx_min_actv_time_cap); > + > + if (attr->rx_hibern8_time_cap) > + ufshcd_dme_set(hba, > + UIC_ARG_MIB_SEL(RX_HIBERN8TIME_CAP, i), > + attr->rx_hibern8_time_cap); > + } > + } else if (attr->rx_adv_fine_gran_sup_en == 1) { > + for_each_ufs_rx_lane(ufs, i) { > + if (attr->rx_adv_fine_gran_step) > + ufshcd_dme_set(hba, > + UIC_ARG_MIB_SEL(RX_ADV_GRANULARITY_CAP, i), > + RX_ADV_FINE_GRAN_STEP(attr->rx_adv_fine_gran_step)); > + > + if (attr->rx_adv_min_actv_time_cap) > + ufshcd_dme_set(hba, > + UIC_ARG_MIB_SEL(RX_ADV_MIN_ACTIVATETIME_CAP, i), > + attr->rx_adv_min_actv_time_cap); > + > + if (attr->rx_adv_hibern8_time_cap) > + ufshcd_dme_set(hba, > + UIC_ARG_MIB_SEL(RX_ADV_HIBERN8TIME_CAP, i), > + attr->rx_adv_hibern8_time_cap); > + } > + } > + > + exynos_ufs_disable_ov_tm(hba); > +} > + > +static void exynos_ufs_establish_connt(struct exynos_ufs *ufs) > +{ > + struct ufs_hba *hba = ufs->hba; > + enum { > + DEV_ID = 0x00, > + PEER_DEV_ID = 0x01, > + PEER_CPORT_ID = 0x00, > + TRAFFIC_CLASS = 0x00, > + }; > + > + /* allow cport attributes to be set */ > + ufshcd_dme_set(hba, UIC_ARG_MIB(T_CONNECTIONSTATE), CPORT_IDLE); > + > + /* local unipro attributes */ > + ufshcd_dme_set(hba, UIC_ARG_MIB(N_DEVICEID), DEV_ID); > + ufshcd_dme_set(hba, UIC_ARG_MIB(N_DEVICEID_VALID), TRUE); > + ufshcd_dme_set(hba, UIC_ARG_MIB(T_PEERDEVICEID), PEER_DEV_ID); > + ufshcd_dme_set(hba, UIC_ARG_MIB(T_PEERCPORTID), PEER_CPORT_ID); > + ufshcd_dme_set(hba, UIC_ARG_MIB(T_CPORTFLAGS), CPORT_DEF_FLAGS); > + ufshcd_dme_set(hba, UIC_ARG_MIB(T_TRAFFICCLASS), TRAFFIC_CLASS); > + ufshcd_dme_set(hba, UIC_ARG_MIB(T_CONNECTIONSTATE), CPORT_CONNECTED); > +} > + > +static void exynos_ufs_config_smu(struct exynos_ufs *ufs) > +{ > + u32 reg, val; > + > + exynos_ufs_disable_auto_ctrl_hcc_save(ufs, &val); > + > + /* make encryption disabled by default */ > + reg = ufsp_readl(ufs, UFSPRSECURITY); > + ufsp_writel(ufs, reg | NSSMU, UFSPRSECURITY); > + ufsp_writel(ufs, 0x0, UFSPSBEGIN0); > + ufsp_writel(ufs, 0xffffffff, UFSPSEND0); > + ufsp_writel(ufs, 0xff, UFSPSLUN0); > + ufsp_writel(ufs, 0xf1, UFSPSCTRL0); > + > + exynos_ufs_auto_ctrl_hcc_restore(ufs, &val); > +} > + > +static void exynos_ufs_config_sync_pattern_mask(struct exynos_ufs *ufs, > + struct uic_pwr_mode *pwr) > +{ > + struct ufs_hba *hba = ufs->hba; > + u8 g = pwr->gear; > + u32 mask, sync_len; > + enum { > + SYNC_LEN_G1 = 80 * 1000, /* 80us */ > + SYNC_LEN_G2 = 40 * 1000, /* 44us */ > + SYNC_LEN_G3 = 20 * 1000, /* 20us */ > + }; > + int i; > + > + if (g == 1) > + sync_len = SYNC_LEN_G1; > + else if (g == 2) > + sync_len = SYNC_LEN_G2; > + else if (g == 3) > + sync_len = SYNC_LEN_G3; > + else > + return; > + > + mask = exynos_ufs_calc_time_cntr(ufs, sync_len); > + mask = (mask >> 8) & 0xff; > + > + exynos_ufs_enable_ov_tm(hba); > + > + for_each_ufs_rx_lane(ufs, i) > + ufshcd_dme_set(hba, > + UIC_ARG_MIB_SEL(RX_SYNC_MASK_LENGTH, i), mask); > + > + exynos_ufs_disable_ov_tm(hba); > +} > + > +static int exynos_ufs_pre_pwr_mode(struct ufs_hba *hba, > + struct ufs_pa_layer_attr *pwr_max, > + struct ufs_pa_layer_attr *final) > +{ > + struct exynos_ufs *ufs = to_exynos_ufs(hba); > + struct uic_pwr_mode *pwr_req = &ufs->pwr_req; > + struct uic_pwr_mode *pwr_act = &ufs->pwr_act; > + > + final->gear_rx > + = pwr_act->gear = min_t(u8, pwr_max->gear_rx, pwr_req->gear); > + final->gear_tx > + = pwr_act->gear = min_t(u8, pwr_max->gear_tx, pwr_req->gear); > + final->lane_rx > + = pwr_act->lane = min_t(u8, pwr_max->lane_rx, pwr_req->lane); > + final->lane_tx > + = pwr_act->lane = min_t(u8, pwr_max->lane_tx, pwr_req->lane); > + final->pwr_rx = pwr_act->mode = pwr_req->mode; > + final->pwr_tx = pwr_act->mode = pwr_req->mode; > + final->hs_rate = pwr_act->hs_series = pwr_req->hs_series; > + > + /* save and configure l2 timer */ > + pwr_act->l_l2_timer[0] = pwr_req->l_l2_timer[0]; > + pwr_act->l_l2_timer[1] = pwr_req->l_l2_timer[1]; > + pwr_act->l_l2_timer[2] = pwr_req->l_l2_timer[2]; > + pwr_act->r_l2_timer[0] = pwr_req->r_l2_timer[0]; > + pwr_act->r_l2_timer[1] = pwr_req->r_l2_timer[1]; > + pwr_act->r_l2_timer[2] = pwr_req->r_l2_timer[2]; > + > + ufshcd_dme_set(hba, > + UIC_ARG_MIB(DL_FC0PROTTIMEOUTVAL), pwr_act->l_l2_timer[0]); > + ufshcd_dme_set(hba, > + UIC_ARG_MIB(DL_TC0REPLAYTIMEOUTVAL), pwr_act->l_l2_timer[1]); > + ufshcd_dme_set(hba, > + UIC_ARG_MIB(DL_AFC0REQTIMEOUTVAL), pwr_act->l_l2_timer[2]); > + ufshcd_dme_set(hba, > + UIC_ARG_MIB(PA_PWRMODEUSERDATA0), pwr_act->r_l2_timer[0]); > + ufshcd_dme_set(hba, > + UIC_ARG_MIB(PA_PWRMODEUSERDATA1), pwr_act->r_l2_timer[1]); > + ufshcd_dme_set(hba, > + UIC_ARG_MIB(PA_PWRMODEUSERDATA2), pwr_act->r_l2_timer[2]); > + > + unipro_writel(ufs, > + pwr_act->l_l2_timer[0], UNIPRO_DME_PWR_REQ_LOCALL2TIMER0); > + unipro_writel(ufs, > + pwr_act->l_l2_timer[1], UNIPRO_DME_PWR_REQ_LOCALL2TIMER1); > + unipro_writel(ufs, > + pwr_act->l_l2_timer[2], UNIPRO_DME_PWR_REQ_LOCALL2TIMER2); > + unipro_writel(ufs, > + pwr_act->r_l2_timer[0], UNIPRO_DME_PWR_REQ_REMOTEL2TIMER0); > + unipro_writel(ufs, > + pwr_act->r_l2_timer[1], UNIPRO_DME_PWR_REQ_REMOTEL2TIMER1); > + unipro_writel(ufs, > + pwr_act->r_l2_timer[2], UNIPRO_DME_PWR_REQ_REMOTEL2TIMER2); > + > + if (ufs->drv_data->pre_pwr_change) > + ufs->drv_data->pre_pwr_change(ufs, pwr_act); > + > + if (IS_UFS_PWR_MODE_HS(pwr_act->mode)) { > + exynos_ufs_config_sync_pattern_mask(ufs, pwr_act); > + > + switch (pwr_act->hs_series) { > + case PA_HS_MODE_A: > + case PA_HS_MODE_B: > + exynos_ufs_phy_calibrate_pre_pwr_hs(ufs->phy, > + PWR_MODE_HS(pwr_act->gear, pwr_act->hs_series)); > + break; > + } > + } > + > + return 0; > +} > + > +#define PWR_MODE_STR_LEN 64 > +static int exynos_ufs_post_pwr_mode(struct ufs_hba *hba, > + struct ufs_pa_layer_attr *pwr_max, > + struct ufs_pa_layer_attr *pwr_req) > +{ > + struct exynos_ufs *ufs = to_exynos_ufs(hba); > + struct uic_pwr_mode *pwr = &ufs->pwr_act; > + char pwr_str[PWR_MODE_STR_LEN] = ""; > + int ret = 0; > + > + if (ufs->drv_data->post_pwr_change) > + ufs->drv_data->post_pwr_change(ufs, pwr); > + > + if (IS_UFS_PWR_MODE_HS(pwr->mode)) { > + switch (pwr->hs_series) { > + case PA_HS_MODE_A: > + case PA_HS_MODE_B: > + exynos_ufs_phy_calibrate_post_pwr_hs(ufs->phy, > + PWR_MODE_HS(pwr->gear, pwr->hs_series)); > + break; > + } > + > + ret = exynos_ufs_phy_wait_for_lock_acq(ufs->phy); > + snprintf(pwr_str, sizeof(pwr_str), "Fast%s series_%s G_%d L_%d", > + pwr->mode == FASTAUTO_MODE ? "_Auto" : "", > + pwr->hs_series == PA_HS_MODE_A ? "A" : "B", > + pwr->gear, pwr->lane); > + } else if (IS_UFS_PWR_MODE_PWM(pwr->mode)) { > + snprintf(pwr_str, sizeof(pwr_str), "Slow%s G_%d L_%d", > + pwr->mode == SLOWAUTO_MODE ? "_Auto" : "", > + pwr->gear, pwr->lane); > + } > + > + dev_info(hba->dev, "Power mode change %d : %s\n", ret, pwr_str); > + return ret; > +} > + > +static void exynos_ufs_specify_nexus_t_xfer_req(struct ufs_hba *hba, > + int tag, struct scsi_cmnd *cmd) > +{ > + struct exynos_ufs *ufs = to_exynos_ufs(hba); > + u32 type; > + > + type = hci_readl(ufs, HCI_UTRL_NEXUS_TYPE); > + > + if (cmd) > + hci_writel(ufs, type | (1 << tag), HCI_UTRL_NEXUS_TYPE); > + else > + hci_writel(ufs, type & ~(1 << tag), HCI_UTRL_NEXUS_TYPE); > +} > + > +static void exynos_ufs_specify_nexus_t_tm_req(struct ufs_hba *hba, > + int tag, u8 func) > +{ > + struct exynos_ufs *ufs = to_exynos_ufs(hba); > + u32 type; > + > + type = hci_readl(ufs, HCI_UTMRL_NEXUS_TYPE); > + > + switch (func) { > + case UFS_ABORT_TASK: > + case UFS_QUERY_TASK: > + hci_writel(ufs, type | (1 << tag), HCI_UTMRL_NEXUS_TYPE); > + break; > + case UFS_ABORT_TASK_SET: > + case UFS_CLEAR_TASK_SET: > + case UFS_LOGICAL_RESET: > + case UFS_QUERY_TASK_SET: > + hci_writel(ufs, type & ~(1 << tag), HCI_UTMRL_NEXUS_TYPE); > + break; > + } > +} > + > +static void exynos_ufs_phy_init(struct exynos_ufs *ufs) > +{ > + struct ufs_hba *hba = ufs->hba; > + > + if (ufs->avail_ln_rx == 0 || ufs->avail_ln_tx == 0) { > + ufshcd_dme_get(hba, UIC_ARG_MIB(PA_AVAILRXDATALANES), > + &ufs->avail_ln_rx); > + ufshcd_dme_get(hba, UIC_ARG_MIB(PA_AVAILTXDATALANES), > + &ufs->avail_ln_tx); > + WARN(ufs->avail_ln_rx != ufs->avail_ln_tx, > + "available data lane is not equal(rx:%d, tx:%d)\n", > + ufs->avail_ln_rx, ufs->avail_ln_tx); > + } > + > + exynos_ufs_phy_set_lane_cnt(ufs->phy, ufs->avail_ln_rx); > + exynos_ufs_phy_calibrate_pre_init(ufs->phy); > +} > + > +static void exynos_ufs_config_unipro(struct exynos_ufs *ufs) > +{ > + struct ufs_hba *hba = ufs->hba; > + > + ufshcd_dme_set(hba, UIC_ARG_MIB(PA_DBG_CLK_PERIOD), > + DIV_ROUND_UP(NSEC_PER_SEC, ufs->mclk_rate)); > + ufshcd_dme_set(hba, UIC_ARG_MIB(PA_TXTRAILINGCLOCKS), > + ufs->drv_data->uic_attr->tx_trailingclks); > + ufshcd_dme_set(hba, UIC_ARG_MIB(PA_DBG_OPTION_SUITE), > + ufs->drv_data->uic_attr->pa_dbg_option_suite); > +} > + > +static void exynos_ufs_config_intr(struct exynos_ufs *ufs, u32 errs, u8 index) > +{ > + switch (index) { > + case UNIPRO_L1_5: > + hci_writel(ufs, DFES_ERR_EN | errs, HCI_ERR_EN_PA_LAYER); > + break; > + case UNIPRO_L2: > + hci_writel(ufs, DFES_ERR_EN | errs, HCI_ERR_EN_DL_LAYER); > + break; > + case UNIPRO_L3: > + hci_writel(ufs, DFES_ERR_EN | errs, HCI_ERR_EN_N_LAYER); > + break; > + case UNIPRO_L4: > + hci_writel(ufs, DFES_ERR_EN | errs, HCI_ERR_EN_T_LAYER); > + break; > + case UNIPRO_DME: > + hci_writel(ufs, DFES_ERR_EN | errs, HCI_ERR_EN_DME_LAYER); > + break; > + } > +} > + > +static int exynos_ufs_pre_link(struct ufs_hba *hba) > +{ > + struct exynos_ufs *ufs = to_exynos_ufs(hba); > + > + /* hci */ > + exynos_ufs_config_intr(ufs, DFES_DEF_L2_ERRS, UNIPRO_L2); > + exynos_ufs_config_intr(ufs, DFES_DEF_L3_ERRS, UNIPRO_L3); > + exynos_ufs_config_intr(ufs, DFES_DEF_L4_ERRS, UNIPRO_L4); > + exynos_ufs_set_unipro_pclk_div(ufs); > + > + /* unipro */ > + exynos_ufs_config_unipro(ufs); > + > + /* m-phy */ > + exynos_ufs_phy_init(ufs); > + exynos_ufs_config_phy_time_attr(ufs); > + exynos_ufs_config_phy_cap_attr(ufs); > + > + if (ufs->drv_data->pre_link) > + ufs->drv_data->pre_link(ufs); > + > + return 0; > +} > + > +static void exynos_ufs_fit_aggr_timeout(struct exynos_ufs *ufs) > +{ > + const u8 cntr_div = 40; > + u32 val; > + > + val = exynos_ufs_calc_time_cntr(ufs, IATOVAL_NSEC / cntr_div); > + hci_writel(ufs, val & CNT_VAL_1US_MASK, HCI_1US_TO_CNT_VAL); > +} > + > +static int exynos_ufs_post_link(struct ufs_hba *hba) > +{ > + struct exynos_ufs *ufs = to_exynos_ufs(hba); > + struct exynos_ufs_uic_attr *attr = ufs->drv_data->uic_attr; > + > + exynos_ufs_establish_connt(ufs); > + exynos_ufs_fit_aggr_timeout(ufs); > + > + hci_writel(ufs, 0xa, HCI_DATA_REORDER); > + hci_writel(ufs, PRDT_PREFECT_EN | PRDT_SET_SIZE(12), > + HCI_TXPRDT_ENTRY_SIZE); > + hci_writel(ufs, PRDT_SET_SIZE(12), HCI_RXPRDT_ENTRY_SIZE); > + hci_writel(ufs, (1 << hba->nutrs) - 1, HCI_UTRL_NEXUS_TYPE); > + hci_writel(ufs, (1 << hba->nutmrs) - 1, HCI_UTMRL_NEXUS_TYPE); > + hci_writel(ufs, 0xf, HCI_AXIDMA_RWDATA_BURST_LEN); > + > + if (ufs->opts & EXYNOS_UFS_OPT_SKIP_CONNECTION_ESTAB) > + ufshcd_dme_set(hba, > + UIC_ARG_MIB(T_DBG_SKIP_INIT_HIBERN8_EXIT), TRUE); > + > + if (attr->pa_granularity) { > + exynos_ufs_enable_dbg_mode(hba); > + ufshcd_dme_set(hba, UIC_ARG_MIB(PA_GRANULARITY), > + attr->pa_granularity); > + exynos_ufs_disable_dbg_mode(hba); > + > + if (attr->pa_tactivate) > + ufshcd_dme_set(hba, UIC_ARG_MIB(PA_TACTIVATE), > + attr->pa_tactivate); > + if (attr->pa_hibern8time && > + !(ufs->opts & EXYNOS_UFS_OPT_USE_SW_HIBERN8_TIMER)) > + ufshcd_dme_set(hba, UIC_ARG_MIB(PA_HIBERN8TIME), > + attr->pa_hibern8time); > + } > + > + if (ufs->opts & EXYNOS_UFS_OPT_USE_SW_HIBERN8_TIMER) { > + if (!attr->pa_granularity) > + ufshcd_dme_get(hba, UIC_ARG_MIB(PA_GRANULARITY), > + &attr->pa_granularity); > + if (!attr->pa_hibern8time) > + ufshcd_dme_get(hba, UIC_ARG_MIB(PA_HIBERN8TIME), > + &attr->pa_hibern8time); > + /* > + * not wait for HIBERN8 time to exit hibernation > + */ > + ufshcd_dme_set(hba, UIC_ARG_MIB(PA_HIBERN8TIME), 0); > + > + if (attr->pa_granularity < 1 || attr->pa_granularity > 6) { > + /* Valid range for granularity: 1 ~ 6 */ > + dev_warn(hba->dev, > + "%s: pa_granularty %d is invalid, assuming backwards compatibility\n", > + __func__, > + attr->pa_granularity); > + attr->pa_granularity = 6; > + } > + } > + > + exynos_ufs_phy_calibrate_post_init(ufs->phy); > + > + if (ufs->drv_data->post_link) > + ufs->drv_data->post_link(ufs); > + > + return 0; > +} > + > +static void exynos_ufs_specify_pwr_mode(struct device_node *np, > + struct exynos_ufs *ufs) > +{ > + struct uic_pwr_mode *pwr = &ufs->pwr_req; > + const char *str = NULL; > + > + if (!of_property_read_string(np, "ufs,pwr-attr-mode", &str)) { > + if (!strncmp(str, "FAST", sizeof("FAST"))) > + pwr->mode = FAST_MODE; > + else if (!strncmp(str, "SLOW", sizeof("SLOW"))) > + pwr->mode = SLOW_MODE; > + else if (!strncmp(str, "FAST_auto", sizeof("FAST_auto"))) > + pwr->mode = FASTAUTO_MODE; > + else if (!strncmp(str, "SLOW_auto", sizeof("SLOW_auto"))) > + pwr->mode = SLOWAUTO_MODE; > + else > + pwr->mode = FAST_MODE; > + } else { > + pwr->mode = FAST_MODE; > + } > + > + if (of_property_read_u8(np, "ufs,pwr-attr-lane", &pwr->lane)) > + pwr->lane = 1; > + > + if (of_property_read_u8(np, "ufs,pwr-attr-gear", &pwr->gear)) > + pwr->gear = 1; > + > + if (IS_UFS_PWR_MODE_HS(pwr->mode)) { > + if (!of_property_read_string(np, > + "ufs,pwr-attr-hs-series", &str)) { > + if (!strncmp(str, "HS_rate_b", sizeof("HS_rate_b"))) > + pwr->hs_series = PA_HS_MODE_B; > + else if (!strncmp(str, "HS_rate_a", sizeof("HS_rate_a"))) > + pwr->hs_series = PA_HS_MODE_A; > + else > + pwr->hs_series = PA_HS_MODE_A; > + } else { > + pwr->hs_series = PA_HS_MODE_A; > + } > + } > + > + if (of_property_read_u32_array( > + np, "ufs,pwr-local-l2-timer", pwr->l_l2_timer, 3)) { > + pwr->l_l2_timer[0] = FC0PROTTIMEOUTVAL; > + pwr->l_l2_timer[1] = TC0REPLAYTIMEOUTVAL; > + pwr->l_l2_timer[2] = AFC0REQTIMEOUTVAL; > + } > + > + if (of_property_read_u32_array( > + np, "ufs,pwr-remote-l2-timer", pwr->r_l2_timer, 3)) { > + pwr->r_l2_timer[0] = FC0PROTTIMEOUTVAL; > + pwr->r_l2_timer[1] = TC0REPLAYTIMEOUTVAL; > + pwr->r_l2_timer[2] = AFC0REQTIMEOUTVAL; > + } > +} > + > +static int exynos_ufs_parse_dt(struct device *dev, struct exynos_ufs *ufs) > +{ > + struct device_node *np = dev->of_node; > + struct exynos_ufs_drv_data *drv_data = exynos_ufs_drvs; > + struct exynos_ufs_uic_attr *attr; > + u32 freq[2]; > + int ret; > + > + while (drv_data->compatible) { > + if (of_device_is_compatible(np, drv_data->compatible)) { > + ufs->drv_data = drv_data; > + break; > + } > + drv_data++; > + } > + > + if (ufs->drv_data && ufs->drv_data->uic_attr) { > + attr = ufs->drv_data->uic_attr; > + } else { > + dev_err(dev, "failed to get uic attributes\n"); > + ret = -EINVAL; > + goto out; > + } > + > + ret = of_property_read_u32_array(np, > + "pclk-freq-avail-range", freq, ARRAY_SIZE(freq)); > + if (!ret) { > + ufs->pclk_avail_min = freq[0]; > + ufs->pclk_avail_max = freq[1]; > + } else { > + dev_err(dev, "failed to get available pclk range\n"); > + goto out; > + } > + > + exynos_ufs_specify_pwr_mode(np, ufs); > + > + if (!of_property_read_u32(np, "ufs-rx-adv-fine-gran-sup_en", of_property_read_bool can be used instead. > + &attr->rx_adv_fine_gran_sup_en)) { > + if (attr->rx_adv_fine_gran_sup_en == 0) { > + /* 100us step */ > + if (of_property_read_u32(np, > + "ufs-rx-min-activate-time-cap", > + &attr->rx_min_actv_time_cap)) > + dev_warn(dev, > + "ufs-rx-min-activate-time-cap is empty\n"); > + > + if (of_property_read_u32(np, > + "ufs-rx-hibern8-time-cap", > + &attr->rx_hibern8_time_cap)) > + dev_warn(dev, > + "ufs-rx-hibern8-time-cap is empty\n"); > + } else if (attr->rx_adv_fine_gran_sup_en == 1) { > + /* fine granularity step */ > + if (of_property_read_u32(np, > + "ufs-rx-adv-fine-gran-step", > + &attr->rx_adv_fine_gran_step)) > + dev_warn(dev, > + "ufs-rx-adv-fine-gran-step is empty\n"); > + > + if (of_property_read_u32(np, > + "ufs-rx-adv-min-activate-time-cap", > + &attr->rx_adv_min_actv_time_cap)) > + dev_warn(dev, > + "ufs-rx-adv-min-activate-time-cap is empty\n"); > + > + if (of_property_read_u32(np, > + "ufs-rx-adv-hibern8-time-cap", > + &attr->rx_adv_hibern8_time_cap)) > + dev_warn(dev, > + "ufs-rx-adv-hibern8-time-cap is empty\n"); > + } else { > + dev_warn(dev, > + "not supported val for ufs-rx-adv-fine-gran-sup_en %d\n", > + attr->rx_adv_fine_gran_sup_en); > + } > + } else { > + attr->rx_adv_fine_gran_sup_en = 0xf; > + } > + > + if (!of_property_read_u32(np, > + "ufs-pa-granularity", &attr->pa_granularity)) { > + if (of_property_read_u32(np, > + "ufs-pa-tacctivate", &attr->pa_tactivate)) > + dev_warn(dev, "ufs-pa-tacctivate is empty\n"); > + > + if (of_property_read_u32(np, > + "ufs-pa-hibern8time", &attr->pa_hibern8time)) > + dev_warn(dev, "ufs-pa-hibern8time is empty\n"); > + } > + > +out: > + return ret; > +} > + > +static int exynos_ufs_init(struct ufs_hba *hba) > +{ > + struct device *dev = hba->dev; > + struct platform_device *pdev = to_platform_device(dev); > + struct exynos_ufs *ufs; > + struct resource *res; > + int ret; > + > + ufs = devm_kzalloc(dev, sizeof(*ufs), GFP_KERNEL); > + if (!ufs) > + return -ENOMEM; > + > + /* exynos-specific hci */ > + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "vs_hci"); > + ufs->reg_hci = devm_ioremap_resource(dev, res); > + if (!ufs->reg_hci) { > + dev_err(dev, "cannot ioremap for hci vendor register\n"); > + return -ENOMEM; > + } > + > + /* unipro */ > + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "unipro"); > + ufs->reg_unipro = devm_ioremap_resource(dev, res); > + if (!ufs->reg_unipro) { > + dev_err(dev, "cannot ioremap for unipro register\n"); > + return -ENOMEM; > + } > + > + /* ufs protector */ > + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ufsp"); > + ufs->reg_ufsp = devm_ioremap_resource(dev, res); > + if (!ufs->reg_ufsp) { > + dev_err(dev, "cannot ioremap for ufs protector register\n"); > + return -ENOMEM; > + } > + > + ret = exynos_ufs_parse_dt(dev, ufs); > + if (ret) { > + dev_err(dev, "failed to get dt info.\n"); > + goto out; > + } > + > + ufs->phy = devm_phy_get(dev, "ufs-phy"); > + if (IS_ERR(ufs->phy)) { > + ret = PTR_ERR(ufs->phy); > + dev_err(dev, "failed to get ufs-phy\n"); > + goto out; > + } > + > + phy_init(ufs->phy); > + ret = phy_power_on(ufs->phy); > + if (ret) > + goto phy_exit; > + > + ufs->hba = hba; > + ufs->opts = ufs->drv_data->opts | > + EXYNOS_UFS_OPT_SKIP_CONNECTION_ESTAB | > + EXYNOS_UFS_OPT_USE_SW_HIBERN8_TIMER; > + ufs->rx_sel_idx = PA_MAXDATALANES; > + if (ufs->opts & EXYNOS_UFS_OPT_BROKEN_RX_SEL_IDX) > + ufs->rx_sel_idx = 0; > + hba->priv = (void *)ufs; > + hba->quirks = ufs->drv_data->quirks; > + if (ufs->drv_data->drv_init) { > + ret = ufs->drv_data->drv_init(dev, ufs); > + if (ret) { > + dev_err(dev, "failed to init drv-data\n"); > + goto phy_off; > + } > + } > + > + ret = exynos_ufs_get_clk_info(ufs); > + if (ret) > + goto phy_off; > + exynos_ufs_specify_phy_time_attr(ufs); > + exynos_ufs_config_smu(ufs); > + return 0; > + > +phy_off: > + phy_power_off(ufs->phy); > +phy_exit: > + phy_exit(ufs->phy); > + hba->priv = NULL; > +out: > + return ret; > +} > + > +static int exynos_ufs_host_reset(struct ufs_hba *hba) > +{ > + struct exynos_ufs *ufs = to_exynos_ufs(hba); > + unsigned long timeout = jiffies + msecs_to_jiffies(1); > + u32 val; > + int ret = 0; > + > + exynos_ufs_disable_auto_ctrl_hcc_save(ufs, &val); > + > + hci_writel(ufs, UFS_SW_RST_MASK, HCI_SW_RST); > + > + do { > + if (!(hci_readl(ufs, HCI_SW_RST) & UFS_SW_RST_MASK)) > + goto out; > + } while (time_before(jiffies, timeout)); > + > + dev_err(hba->dev, "timeout host sw-reset\n"); > + ret = -ETIMEDOUT; > + > +out: > + exynos_ufs_auto_ctrl_hcc_restore(ufs, &val); > + return ret; > +} > + > +static void exynos_ufs_dev_hw_reset(struct ufs_hba *hba) > +{ > + struct exynos_ufs *ufs = to_exynos_ufs(hba); > + > + hci_writel(ufs, 0 << 0, HCI_GPIO_OUT); > + udelay(5); > + hci_writel(ufs, 1 << 0, HCI_GPIO_OUT); > +} > + > +static void exynos_ufs_pre_hibern8(struct ufs_hba *hba, u8 enter) > +{ > + struct exynos_ufs *ufs = to_exynos_ufs(hba); > + struct exynos_ufs_uic_attr *attr = ufs->drv_data->uic_attr; > + > + if (!enter) { > + if (ufs->opts & EXYNOS_UFS_OPT_BROKEN_AUTO_CLK_CTRL) > + exynos_ufs_disable_auto_ctrl_hcc(ufs); > + exynos_ufs_ungate_clks(ufs); > + > + if (ufs->opts & EXYNOS_UFS_OPT_USE_SW_HIBERN8_TIMER) { > + const unsigned int granularity_tbl[] = { > + 1, 4, 8, 16, 32, 100 > + }; > + int h8_time = attr->pa_hibern8time * > + granularity_tbl[attr->pa_granularity - 1]; > + unsigned long us; > + s64 delta; > + > + do { > + delta = h8_time - ktime_us_delta(ktime_get(), > + ufs->entry_hibern8_t); > + if (delta <= 0) > + break; > + > + us = min_t(s64, delta, USEC_PER_MSEC); > + if (us >= 10) > + usleep_range(us, us + 10); > + else > + udelay(us); > + } while (1); > + } > + } > +} > + > +static void exynos_ufs_post_hibern8(struct ufs_hba *hba, u8 enter) > +{ > + struct exynos_ufs *ufs = to_exynos_ufs(hba); > + > + if (!enter) { > + struct uic_pwr_mode *pwr = &ufs->pwr_act; > + u32 mode = 0; > + > + ufshcd_dme_get(hba, UIC_ARG_MIB(PA_PWRMODE), &mode); > + if (mode != (pwr->mode << 4 | pwr->mode)) { > + dev_warn(hba->dev, "%s: power mode change\n", __func__); > + hba->pwr_info.pwr_rx = (mode >> 4) & 0xf; > + hba->pwr_info.pwr_tx = mode & 0xf; > + ufshcd_config_pwr_mode(hba, &hba->max_pwr_info.info); > + } > + > + if (!(ufs->opts & EXYNOS_UFS_OPT_SKIP_CONNECTION_ESTAB)) > + exynos_ufs_establish_connt(ufs); > + } else { > + ufs->entry_hibern8_t = ktime_get(); > + exynos_ufs_gate_clks(ufs); > + if (ufs->opts & EXYNOS_UFS_OPT_BROKEN_AUTO_CLK_CTRL) > + exynos_ufs_enable_auto_ctrl_hcc(ufs); > + } > +} > + > +static int exynos_ufs_hce_enable_notify(struct ufs_hba *hba, bool notify) > +{ > + struct exynos_ufs *ufs = to_exynos_ufs(hba); > + int ret = 0; > + > + switch ((u8)notify) { > + case PRE_CHANGE: > + ret = exynos_ufs_host_reset(hba); > + if (ret) > + return ret; > + exynos_ufs_dev_hw_reset(hba); > + break; > + case POST_CHANGE: > + exynos_ufs_calc_pwm_clk_div(ufs); > + if (!(ufs->opts & EXYNOS_UFS_OPT_BROKEN_AUTO_CLK_CTRL)) > + exynos_ufs_enable_auto_ctrl_hcc(ufs); > + break; > + } > + > + return ret; > +} > + > +static int exynos_ufs_link_startup_notify(struct ufs_hba *hba, bool notify) > +{ > + int ret = 0; > + > + switch ((u8)notify) { > + case PRE_CHANGE: > + ret = exynos_ufs_pre_link(hba); > + break; > + case POST_CHANGE: > + ret = exynos_ufs_post_link(hba); > + break; > + } > + > + return ret; > +} > + > +static int exynos_ufs_pwr_change_notify(struct ufs_hba *hba, bool notify, > + struct ufs_pa_layer_attr *pwr_max, > + struct ufs_pa_layer_attr *pwr_req) > +{ > + int ret = 0; > + > + switch ((u8)notify) { > + case PRE_CHANGE: > + ret = exynos_ufs_pre_pwr_mode(hba, pwr_max, pwr_req); > + break; > + case POST_CHANGE: > + ret = exynos_ufs_post_pwr_mode(hba, NULL, pwr_req); > + break; > + } > + > + return ret; > +} > + > +static int exynos_ufs_hibern8_notify(struct ufs_hba *hba, > + bool enter, bool notify) > +{ > + switch ((u8)notify) { > + case PRE_CHANGE: > + exynos_ufs_pre_hibern8(hba, enter); > + break; > + case POST_CHANGE: > + exynos_ufs_post_hibern8(hba, enter); > + break; > + } > + > + return 0; > +} > + > +static int exynos_ufs_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op) > +{ > + struct exynos_ufs *ufs = to_exynos_ufs(hba); > + > + if (!ufshcd_is_link_active(hba)) > + phy_power_off(ufs->phy); > + > + return 0; > +} > + > +static int exynos_ufs_resume(struct ufs_hba *hba, enum ufs_pm_op pm_op) > +{ > + struct exynos_ufs *ufs = to_exynos_ufs(hba); > + > + if (!ufshcd_is_link_active(hba)) > + phy_power_on(ufs->phy); > + > + exynos_ufs_config_smu(ufs); > + > + return 0; > +} > + > +const struct ufs_hba_variant_ops ufs_hba_exynos_ops = { > + .name = "exynos_ufs", > + .init = exynos_ufs_init, > + .hce_enable_notify = exynos_ufs_hce_enable_notify, > + .link_startup_notify = exynos_ufs_link_startup_notify, > + .pwr_change_notify = exynos_ufs_pwr_change_notify, > + .specify_nexus_t_xfer_req = exynos_ufs_specify_nexus_t_xfer_req, > + .specify_nexus_t_tm_req = exynos_ufs_specify_nexus_t_tm_req, > + .hibern8_notify = exynos_ufs_hibern8_notify, > + .suspend = exynos_ufs_suspend, > + .resume = exynos_ufs_resume, > +}; I suppose this ops should be registered as platform data inside the ufshcd-pltfrm.c file, which i could not found so this driver will not get invoked. Please add this in the next iteration. After all these changes you can add for the whole series. Reviewed by: Amit Daniel Kachhap Thanks, Amit > +EXPORT_SYMBOL(ufs_hba_exynos_ops); > diff --git a/drivers/scsi/ufs/ufs-exynos.h b/drivers/scsi/ufs/ufs-exynos.h > new file mode 100644 > index 0000000..58aa714 > --- /dev/null > +++ b/drivers/scsi/ufs/ufs-exynos.h > @@ -0,0 +1,463 @@ > +/* > + * UFS Host Controller driver for Exynos specific extensions > + * > + * Copyright (C) 2014-2015 Samsung Electronics Co., Ltd. > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License as published by > + * the Free Software Foundation; either version 2 of the License, or > + * (at your option) any later version. > + */ > + > +#ifndef _UFS_EXYNOS_H_ > +#define _UFS_EXYNOS_H_ > + > +/* > + * Exynos's Vendor specific registers for UFSHCI > + */ > +#define HCI_TXPRDT_ENTRY_SIZE 0x00 > +#define PRDT_PREFECT_EN BIT(31) > +#define PRDT_SET_SIZE(x) ((x) & 0x1F) > +#define HCI_RXPRDT_ENTRY_SIZE 0x04 > +#define HCI_TO_CNT_DIV_VAL 0x08 > +#define HCI_1US_TO_CNT_VAL 0x0C > +#define CNT_VAL_1US_MASK 0x3FF > +#define HCI_INVALID_UPIU_CTRL 0x10 > +#define HCI_INVALID_UPIU_BADDR 0x14 > +#define HCI_INVALID_UPIU_UBADDR 0x18 > +#define HCI_INVALID_UTMR_OFFSET_ADDR 0x1C > +#define HCI_INVALID_UTR_OFFSET_ADDR 0x20 > +#define HCI_INVALID_DIN_OFFSET_ADDR 0x24 > +#define HCI_DBR_TIMER_CONFIG 0x28 > +#define HCI_DBR_TIMER_STATUS 0x2C > +#define HCI_VENDOR_SPECIFIC_IS 0x38 > +#define HCI_VENDOR_SPECIFIC_IE 0x3C > +#define HCI_UTRL_NEXUS_TYPE 0x40 > +#define HCI_UTMRL_NEXUS_TYPE 0x44 > +#define HCI_E2EFC_CTRL 0x48 > +#define HCI_SW_RST 0x50 > +#define UFS_LINK_SW_RST BIT(0) > +#define UFS_UNIPRO_SW_RST BIT(1) > +#define UFS_SW_RST_MASK (UFS_UNIPRO_SW_RST | UFS_LINK_SW_RST) > +#define HCI_LINK_VERSION 0x54 > +#define HCI_IDLE_TIMER_CONFIG 0x58 > +#define HCI_RX_UPIU_MATCH_ERROR_CODE 0x5C > +#define HCI_DATA_REORDER 0x60 > +#define HCI_MAX_DOUT_DATA_SIZE 0x64 > +#define HCI_UNIPRO_APB_CLK_CTRL 0x68 > +#define UNIPRO_APB_CLK(v, x) (((v) & ~0xF) | ((x) & 0xF)) > +#define HCI_AXIDMA_RWDATA_BURST_LEN 0x6C > +#define HCI_GPIO_OUT 0x70 > +#define HCI_WRITE_DMA_CTRL 0x74 > +#define HCI_ERR_EN_PA_LAYER 0x78 > +#define HCI_ERR_EN_DL_LAYER 0x7C > +#define HCI_ERR_EN_N_LAYER 0x80 > +#define HCI_ERR_EN_T_LAYER 0x84 > +#define HCI_ERR_EN_DME_LAYER 0x88 > +#define HCI_REQ_HOLD_EN 0xAC > +#define HCI_CLKSTOP_CTRL 0xB0 > +#define REFCLK_STOP BIT(2) > +#define UNIPRO_MCLK_STOP BIT(1) > +#define UNIPRO_PCLK_STOP BIT(0) > +#define CLK_STOP_MASK (REFCLK_STOP |\ > + UNIPRO_MCLK_STOP |\ > + UNIPRO_PCLK_STOP) > +#define HCI_MISC 0xB4 > +#define REFCLK_CTRL_EN BIT(7) > +#define UNIPRO_PCLK_CTRL_EN BIT(6) > +#define UNIPRO_MCLK_CTRL_EN BIT(5) > +#define HCI_CORECLK_CTRL_EN BIT(4) > +#define CLK_CTRL_EN_MASK (REFCLK_CTRL_EN |\ > + UNIPRO_PCLK_CTRL_EN |\ > + UNIPRO_MCLK_CTRL_EN) > +#define HCI_FSM_MONITOR 0xC0 > +#define HCI_PRDT_HIT_RATIO 0xC4 > +#define HCI_DMA0_MONITOR_STATE 0xC8 > +#define HCI_DMA0_MONITOR_CNT 0xCC > +#define HCI_DMA1_MONITOR_STATE 0xD0 > +#define HCI_DMA1_MONITOR_CNT 0xD4 > + > +/* Device fatal error */ > +#define DFES_ERR_EN BIT(31) > +#define DFES_DEF_L2_ERRS (UIC_DATA_LINK_LAYER_ERROR_RX_BUF_OVERFLOW |\ > + UIC_DATA_LINK_LAYER_ERROR_PA_INIT) > +#define DFES_DEF_L3_ERRS (UIC_NETWORK_LAYER_ERROR_UNSUPPORTED_HEADER_TYPE |\ > + UIC_NETWORK_LAYER_ERROR_BAD_DEVICEID_ENC |\ > + UIC_NETWORK_LAYER_ERROR_LHDR_TRAP_PACKET_DROPPING) > +#define DFES_DEF_L4_ERRS (UIC_TRANSPORT_LAYER_ERROR_UNSUPPORTED_HEADER_TYPE |\ > + UIC_TRANSPORT_LAYER_ERROR_UNKNOWN_CPORTID |\ > + UIC_TRANSPORT_LAYER_ERROR_NO_CONNECTION_RX |\ > + UIC_TRANSPORT_LAYER_ERROR_BAD_TC) > + > +enum { > + UNIPRO_L1_5 = 0,/* PHY Adapter */ > + UNIPRO_L2, /* Data Link */ > + UNIPRO_L3, /* Network */ > + UNIPRO_L4, /* Transport */ > + UNIPRO_DME, /* DME */ > +}; > + > +/* > + * UNIPRO registers > + */ > +#define UNIPRO_COMP_VERSION 0x000 > +#define UNIPRO_COMP_VERSION 0x000 > +#define UNIPRO_COMP_INFO 0x004 > +#define UNIPRO_COMP_RESET 0x010 > +#define UNIPRO_DME_POWERON_REQ 0x040 > +#define UNIPRO_DME_POWERON_CNF_RESULT 0x044 > +#define UNIPRO_DME_POWEROFF_REQ 0x048 > +#define UNIPRO_DME_POWEROFF_CNF_RESULT 0x04C > +#define UNIPRO_DME_RESET_REQ 0x050 > +#define UNIPRO_DME_RESET_REQ_LEVEL 0x054 > +#define UNIPRO_DME_ENABLE_REQ 0x058 > +#define UNIPRO_DME_ENABLE_CNF_RESULT 0x05C > +#define UNIPRO_DME_ENDPOINTRESET_REQ 0x060 > +#define UNIPRO_DME_ENDPOINTRESET_CNF_RESULT 0x064 > +#define UNIPRO_DME_LINKSTARTUP_REQ 0x068 > +#define UNIPRO_DME_LINKSTARTUP_CNF_RESULT 0x06C > +#define UNIPRO_DME_HIBERN8_ENTER_REQ 0x070 > +#define UNIPRO_DME_HIBERN8_ENTER_CNF_RESULT 0x074 > +#define UNIPRO_DME_HIBERN8_ENTER_IND_RESULT 0x078 > +#define UNIPRO_DME_HIBERN8_EXIT_REQ 0x080 > +#define UNIPRO_DME_HIBERN8_EXIT_CNF_RESULT 0x084 > +#define UNIPRO_DME_HIBERN8_EXIT_IND_RESULT 0x088 > +#define UNIPRO_DME_PWR_REQ 0x090 > +#define UNIPRO_DME_PWR_REQ_POWERMODE 0x094 > +#define UNIPRO_DME_PWR_REQ_LOCALL2TIMER0 0x098 > +#define UNIPRO_DME_PWR_REQ_LOCALL2TIMER1 0x09C > +#define UNIPRO_DME_PWR_REQ_LOCALL2TIMER2 0x0A0 > +#define UNIPRO_DME_PWR_REQ_REMOTEL2TIMER0 0x0A4 > +#define UNIPRO_DME_PWR_REQ_REMOTEL2TIMER1 0x0A8 > +#define UNIPRO_DME_PWR_REQ_REMOTEL2TIMER2 0x0AC > +#define UNIPRO_DME_PWR_CNF_RESULT 0x0B0 > +#define UNIPRO_DME_PWR_IND_RESULT 0x0B4 > +#define UNIPRO_DME_TEST_MODE_REQ 0x0B8 > +#define UNIPRO_DME_TEST_MODE_CNF_RESULT 0x0BC > +#define UNIPRO_DME_ERROR_IND_LAYER 0x0C0 > +#define UNIPRO_DME_ERROR_IND_ERRCODE 0x0C4 > +#define UNIPRO_DME_PACP_CNFBIT 0x0C8 > +#define UNIPRO_DME_DL_FRAME_IND 0x0D0 > +#define UNIPRO_DME_INTR_STATUS 0x0E0 > +#define UNIPRO_DME_INTR_ENABLE 0x0E4 > +#define UNIPRO_DME_GETSET_ADDR 0x100 > +#define UNIPRO_DME_GETSET_WDATA 0x104 > +#define UNIPRO_DME_GETSET_RDATA 0x108 > +#define UNIPRO_DME_GETSET_CONTROL 0x10C > +#define UNIPRO_DME_GETSET_RESULT 0x110 > +#define UNIPRO_DME_PEER_GETSET_ADDR 0x120 > +#define UNIPRO_DME_PEER_GETSET_WDATA 0x124 > +#define UNIPRO_DME_PEER_GETSET_RDATA 0x128 > +#define UNIPRO_DME_PEER_GETSET_CONTROL 0x12C > +#define UNIPRO_DME_PEER_GETSET_RESULT 0x130 > +#define UNIPRO_DBG_FORCE_DME_CTRL_STATE 0x150 > + > +/* > + * UFS Protector registers > + */ > +#define UFSPRCTRL 0x000 > +#define UFSPRSTAT 0x008 > +#define UFSPRSECURITY 0x010 > +#define NSSMU BIT(14) > +#define DESCTYPE(type) ((type & 0x3) << 19) > +#define PROTBYTZPC BIT(31) > +#define UFSPVERSION 0x01C > +#define UFSPRENCKEY0 0x020 > +#define UFSPRENCKEY1 0x024 > +#define UFSPRENCKEY2 0x028 > +#define UFSPRENCKEY3 0x02C > +#define UFSPRENCKEY4 0x030 > +#define UFSPRENCKEY5 0x034 > +#define UFSPRENCKEY6 0x038 > +#define UFSPRENCKEY7 0x03C > +#define UFSPRTWKEY0 0x040 > +#define UFSPRTWKEY1 0x044 > +#define UFSPRTWKEY2 0x048 > +#define UFSPRTWKEY3 0x04C > +#define UFSPRTWKEY4 0x050 > +#define UFSPRTWKEY5 0x054 > +#define UFSPRTWKEY6 0x058 > +#define UFSPRTWKEY7 0x05C > +#define UFSPWCTRL 0x100 > +#define UFSPWSTAT 0x108 > +#define UFSPWSECURITY 0x110 > +#define UFSPWENCKEY0 0x120 > +#define UFSPWENCKEY1 0x124 > +#define UFSPWENCKEY2 0x128 > +#define UFSPWENCKEY3 0x12C > +#define UFSPWENCKEY4 0x130 > +#define UFSPWENCKEY5 0x134 > +#define UFSPWENCKEY6 0x138 > +#define UFSPWENCKEY7 0x13C > +#define UFSPWTWKEY0 0x140 > +#define UFSPWTWKEY1 0x144 > +#define UFSPWTWKEY2 0x148 > +#define UFSPWTWKEY3 0x14C > +#define UFSPWTWKEY4 0x150 > +#define UFSPWTWKEY5 0x154 > +#define UFSPWTWKEY6 0x158 > +#define UFSPWTWKEY7 0x15C > +#define UFSPSBEGIN0 0x200 > +#define UFSPSEND0 0x204 > +#define UFSPSLUN0 0x208 > +#define UFSPSCTRL0 0x20C > +#define UFSPSBEGIN1 0x210 > +#define UFSPSEND1 0x214 > +#define UFSPSLUN1 0x218 > +#define UFSPSCTRL1 0x21C > +#define UFSPSBEGIN2 0x220 > +#define UFSPSEND2 0x224 > +#define UFSPSLUN2 0x228 > +#define UFSPSCTRL2 0x22C > +#define UFSPSBEGIN3 0x230 > +#define UFSPSEND3 0x234 > +#define UFSPSLUN3 0x238 > +#define UFSPSCTRL3 0x23C > +#define UFSPSBEGIN4 0x240 > +#define UFSPSEND4 0x244 > +#define UFSPSLUN4 0x248 > +#define UFSPSCTRL4 0x24C > +#define UFSPSBEGIN5 0x250 > +#define UFSPSEND5 0x254 > +#define UFSPSLUN5 0x258 > +#define UFSPSCTRL5 0x25C > +#define UFSPSBEGIN6 0x260 > +#define UFSPSEND6 0x264 > +#define UFSPSLUN6 0x268 > +#define UFSPSCTRL6 0x26C > +#define UFSPSBEGIN7 0x270 > +#define UFSPSEND7 0x274 > +#define UFSPSLUN7 0x278 > +#define UFSPSCTRL7 0x27C > + > +/* > + * MIBs for PA debug registers > + */ > +#define PA_DBG_CLK_PERIOD 0x9514 > +#define PA_DBG_TXPHY_CFGUPDT 0x9518 > +#define PA_DBG_RXPHY_CFGUPDT 0x9519 > +#define PA_DBG_MODE 0x9529 > +#define PA_DBG_TX_PHY_LATENCY 0x952C > +#define PA_DBG_AUTOMODE_THLD 0x9536 > +#define PA_DBG_SKIP_RESET_PHY 0x9539 > +#define PA_DBG_OV_TM 0x9540 > +#define PA_DBG_SKIP_LINE_RESET 0x9541 > +#define PA_DBG_LINE_RESET_REQ 0x9543 > +#define PA_DBG_MIB_CAP_SEL 0x9546 > +#define PA_DBG_RESUME_HIBERN8 0x9550 > +#define PA_DBG_TX_PHY_LATENCY_EN 0x9552 > +#define PA_DBG_IGNORE_INCOMING 0x9559 > +#define PA_DBG_LINE_RESET_THLD 0x9561 > +#define PA_DBG_OPTION_SUITE 0x9564 > +#define PA_DBG_OPTION_SUITE_DYN 0x9565 > + > +/* > + * MIBs for Transport Layer debug registers > + */ > +#define T_DBG_SKIP_INIT_HIBERN8_EXIT 0xc001 > + > +/* > + * Exynos MPHY attributes > + */ > +#define TX_LINERESET_N_VAL 0x0277 > +#define TX_LINERESET_N(v) (((v) >> 10) & 0xFF) > +#define TX_LINERESET_P_VAL 0x027D > +#define TX_LINERESET_P(v) (((v) >> 12) & 0xFF) > +#define TX_OV_SLEEP_CNT_TIMER 0x028E > +#define TX_OV_H8_ENTER_EN (1 << 7) > +#define TX_OV_SLEEP_CNT(v) (((v) >> 5) & 0x7F) > +#define TX_HIGH_Z_CNT_11_08 0x028C > +#define TX_HIGH_Z_CNT_H(v) (((v) >> 8) & 0xF) > +#define TX_HIGH_Z_CNT_07_00 0x028D > +#define TX_HIGH_Z_CNT_L(v) ((v) & 0xFF) > +#define TX_BASE_NVAL_07_00 0x0293 > +#define TX_BASE_NVAL_L(v) ((v) & 0xFF) > +#define TX_BASE_NVAL_15_08 0x0294 > +#define TX_BASE_NVAL_H(v) (((v) >> 8) & 0xFF) > +#define TX_GRAN_NVAL_07_00 0x0295 > +#define TX_GRAN_NVAL_L(v) ((v) & 0xFF) > +#define TX_GRAN_NVAL_10_08 0x0296 > +#define TX_GRAN_NVAL_H(v) (((v) >> 8) & 0x3) > + > +#define RX_FILLER_ENABLE 0x0316 > +#define RX_FILLER_EN (1 << 1) > +#define RX_LINERESET_VAL 0x0317 > +#define RX_LINERESET(v) (((v) >> 12) & 0xFF) > +#define RX_LCC_IGNORE 0x0318 > +#define RX_SYNC_MASK_LENGTH 0x0321 > +#define RX_HIBERN8_WAIT_VAL_BIT_20_16 0x0331 > +#define RX_HIBERN8_WAIT_VAL_BIT_15_08 0x0332 > +#define RX_HIBERN8_WAIT_VAL_BIT_07_00 0x0333 > +#define RX_OV_SLEEP_CNT_TIMER 0x0340 > +#define RX_OV_SLEEP_CNT(v) (((v) >> 6) & 0x1F) > +#define RX_OV_STALL_CNT_TIMER 0x0341 > +#define RX_OV_STALL_CNT(v) (((v) >> 4) & 0xFF) > +#define RX_BASE_NVAL_07_00 0x0355 > +#define RX_BASE_NVAL_L(v) ((v) & 0xFF) > +#define RX_BASE_NVAL_15_08 0x0354 > +#define RX_BASE_NVAL_H(v) (((v) >> 8) & 0xFF) > +#define RX_GRAN_NVAL_07_00 0x0353 > +#define RX_GRAN_NVAL_L(v) ((v) & 0xFF) > +#define RX_GRAN_NVAL_10_08 0x0352 > +#define RX_GRAN_NVAL_H(v) (((v) >> 8) & 0x3) > + > +#define CMN_PWM_CLK_CTRL 0x0402 > +#define PWM_CLK_CTRL_MASK 0x3 > + > +struct exynos_ufs; > + > +struct uic_pwr_mode { > + u8 lane; > + u8 gear; > + u8 mode; > + u8 hs_series; > + u32 l_l2_timer[3]; /* local */ > + u32 r_l2_timer[3]; /* remote */ > +}; > + > +struct exynos_ufs_uic_attr { > + /* TX Attributes */ > + unsigned int tx_trailingclks; > + unsigned int tx_dif_p_nsec; > + unsigned int tx_dif_n_nsec; > + unsigned int tx_high_z_cnt_nsec; > + unsigned int tx_base_unit_nsec; > + unsigned int tx_gran_unit_nsec; > + unsigned int tx_sleep_cnt; > + unsigned int tx_min_activatetime; > + /* RX Attributes */ > + unsigned int rx_filler_enable; > + unsigned int rx_dif_p_nsec; > + unsigned int rx_hibern8_wait_nsec; > + unsigned int rx_base_unit_nsec; > + unsigned int rx_gran_unit_nsec; > + unsigned int rx_sleep_cnt; > + unsigned int rx_stall_cnt; > + unsigned int rx_hs_g1_sync_len_cap; > + unsigned int rx_hs_g2_sync_len_cap; > + unsigned int rx_hs_g3_sync_len_cap; > + unsigned int rx_hs_g1_prep_sync_len_cap; > + unsigned int rx_hs_g2_prep_sync_len_cap; > + unsigned int rx_hs_g3_prep_sync_len_cap; > + /* Common Attributes */ > + unsigned int cmn_pwm_clk_ctrl; > + /* Internal Attributes */ > + unsigned int pa_dbg_option_suite; > + /* Changeable Attributes */ > + unsigned int rx_adv_fine_gran_sup_en; > + unsigned int rx_adv_fine_gran_step; > + unsigned int rx_min_actv_time_cap; > + unsigned int rx_hibern8_time_cap; > + unsigned int rx_adv_min_actv_time_cap; > + unsigned int rx_adv_hibern8_time_cap; > + unsigned int pa_granularity; > + unsigned int pa_tactivate; > + unsigned int pa_hibern8time; > +}; > + > +struct exynos_ufs_drv_data { > + char *compatible; > + struct exynos_ufs_uic_attr *uic_attr; > + unsigned int quirks; > + unsigned int opts; > + /* SoC's specific operations */ > + int (*drv_init)(struct device *dev, struct exynos_ufs *ufs); > + int (*pre_link)(struct exynos_ufs *ufs); > + int (*post_link)(struct exynos_ufs *ufs); > + int (*pre_pwr_change)(struct exynos_ufs *ufs, struct uic_pwr_mode *pwr); > + int (*post_pwr_change)(struct exynos_ufs *ufs, struct uic_pwr_mode *pwr); > +}; > + > +struct ufs_phy_time_cfg { > + u32 tx_linereset_p; > + u32 tx_linereset_n; > + u32 tx_high_z_cnt; > + u32 tx_base_n_val; > + u32 tx_gran_n_val; > + u32 tx_sleep_cnt; > + u32 rx_linereset; > + u32 rx_hibern8_wait; > + u32 rx_base_n_val; > + u32 rx_gran_n_val; > + u32 rx_sleep_cnt; > + u32 rx_stall_cnt; > +}; > + > +struct exynos_ufs { > + struct ufs_hba *hba; > + struct phy *phy; > + void __iomem *reg_hci; > + void __iomem *reg_unipro; > + void __iomem *reg_ufsp; > + struct clk *clk_hci_core; > + struct clk *clk_unipro_main; > + struct clk *clk_apb; > + u32 pclk_rate; > + u32 pclk_div; > + u32 pclk_avail_min; > + u32 pclk_avail_max; > + u32 mclk_rate; > + int avail_ln_rx; > + int avail_ln_tx; > + int rx_sel_idx; > + struct uic_pwr_mode pwr_req; /* requested power mode */ > + struct uic_pwr_mode pwr_act; /* actual power mode */ > + struct ufs_phy_time_cfg t_cfg; > + ktime_t entry_hibern8_t; > + struct exynos_ufs_drv_data *drv_data; > + > + u32 opts; > +#define EXYNOS_UFS_OPT_HAS_APB_CLK_CTRL BIT(0) > +#define EXYNOS_UFS_OPT_SKIP_CONNECTION_ESTAB BIT(1) > +#define EXYNOS_UFS_OPT_BROKEN_AUTO_CLK_CTRL BIT(2) > +#define EXYNOS_UFS_OPT_BROKEN_RX_SEL_IDX BIT(3) > +#define EXYNOS_UFS_OPT_USE_SW_HIBERN8_TIMER BIT(4) > +}; > + > +#define for_each_ufs_rx_lane(ufs, i) \ > + for (i = (ufs)->rx_sel_idx; \ > + i < (ufs)->rx_sel_idx + (ufs)->avail_ln_rx; i++) > +#define for_each_ufs_tx_lane(ufs, i) \ > + for (i = 0; i < (ufs)->avail_ln_tx; i++) > + > +#define EXYNOS_UFS_MMIO_FUNC(name) \ > +static inline void name##_writel(struct exynos_ufs *ufs, u32 val, u32 reg)\ > +{ \ > + writel(val, ufs->reg_##name + reg); \ > +} \ > + \ > +static inline u32 name##_readl(struct exynos_ufs *ufs, u32 reg) \ > +{ \ > + return readl(ufs->reg_##name + reg); \ > +} > + > +EXYNOS_UFS_MMIO_FUNC(hci); > +EXYNOS_UFS_MMIO_FUNC(unipro); > +EXYNOS_UFS_MMIO_FUNC(ufsp); > +#undef EXYNOS_UFS_MMIO_FUNC > + > +extern long exynos_ufs_calc_time_cntr(struct exynos_ufs *, long); > + > +static inline void exynos_ufs_enable_ov_tm(struct ufs_hba *hba) > +{ > + ufshcd_dme_set(hba, UIC_ARG_MIB(PA_DBG_OV_TM), TRUE); > +} > + > +static inline void exynos_ufs_disable_ov_tm(struct ufs_hba *hba) > +{ > + ufshcd_dme_set(hba, UIC_ARG_MIB(PA_DBG_OV_TM), FALSE); > +} > + > +static inline void exynos_ufs_enable_dbg_mode(struct ufs_hba *hba) > +{ > + ufshcd_dme_set(hba, UIC_ARG_MIB(PA_DBG_MODE), TRUE); > +} > + > +static inline void exynos_ufs_disable_dbg_mode(struct ufs_hba *hba) > +{ > + ufshcd_dme_set(hba, UIC_ARG_MIB(PA_DBG_MODE), FALSE); > +} > + > +extern struct exynos_ufs_drv_data exynos_ufs_drvs[]; > + > +#endif /* _UFS_EXYNOS_H_ */ > diff --git a/drivers/scsi/ufs/ufshci.h b/drivers/scsi/ufs/ufshci.h > index 0ae0967..1c73400 100644 > --- a/drivers/scsi/ufs/ufshci.h > +++ b/drivers/scsi/ufs/ufshci.h > @@ -169,15 +169,39 @@ enum { > /* UECDL - Host UIC Error Code Data Link Layer 3Ch */ > #define UIC_DATA_LINK_LAYER_ERROR UFS_BIT(31) > #define UIC_DATA_LINK_LAYER_ERROR_CODE_MASK 0x7FFF > -#define UIC_DATA_LINK_LAYER_ERROR_PA_INIT 0x2000 > +#define UIC_DATA_LINK_LAYER_ERROR_NAC_RECEIVED UFS_BIT(0) > +#define UIC_DATA_LINK_LAYER_ERROR_TCX_REP_TIMER_EXP UFS_BIT(1) > +#define UIC_DATA_LINK_LAYER_ERROR_AFCX_REQ_TIMER_EXP UFS_BIT(2) > +#define UIC_DATA_LINK_LAYER_ERROR_FCX_PRO_TIMER_EXP UFS_BIT(3) > +#define UIC_DATA_LINK_LAYER_ERROR_CRC UFS_BIT(4) > +#define UIC_DATA_LINK_LAYER_ERROR_RX_BUF_OVERFLOW UFS_BIT(5) > +#define UIC_DATA_LINK_LAYER_ERROR_MASK_FRAME_LEN_EXCD UFS_BIT(6) > +#define UIC_DATA_LINK_LAYER_ERROR_WRONG_SEQ_NUM UFS_BIT(7) > +#define UIC_DATA_LINK_LAYER_ERROR_AFC_FRAME_SYNTAX UFS_BIT(8) > +#define UIC_DATA_LINK_LAYER_ERROR_NAC_FRAME_SYNTAX UFS_BIT(9) > +#define UIC_DATA_LINK_LAYER_ERROR_EOF_SYNTAX UFS_BIT(10) > +#define UIC_DATA_LINK_LAYER_ERROR_FRAME_SYNTAX UFS_BIT(11) > +#define UIC_DATA_LINK_LAYER_ERROR_BAD_CTRL_SYMB_TYPE UFS_BIT(12) > +#define UIC_DATA_LINK_LAYER_ERROR_PA_INIT UFS_BIT(13) > +#define UIC_DATA_LINK_LAYER_ERROR_PA_ERROR_IND_RECV UFS_BIT(14) > > /* UECN - Host UIC Error Code Network Layer 40h */ > #define UIC_NETWORK_LAYER_ERROR UFS_BIT(31) > #define UIC_NETWORK_LAYER_ERROR_CODE_MASK 0x7 > +#define UIC_NETWORK_LAYER_ERROR_UNSUPPORTED_HEADER_TYPE UFS_BIT(0) > +#define UIC_NETWORK_LAYER_ERROR_BAD_DEVICEID_ENC UFS_BIT(1) > +#define UIC_NETWORK_LAYER_ERROR_LHDR_TRAP_PACKET_DROPPING UFS_BIT(2) > > /* UECT - Host UIC Error Code Transport Layer 44h */ > #define UIC_TRANSPORT_LAYER_ERROR UFS_BIT(31) > #define UIC_TRANSPORT_LAYER_ERROR_CODE_MASK 0x7F > +#define UIC_TRANSPORT_LAYER_ERROR_UNSUPPORTED_HEADER_TYPE UFS_BIT(0) > +#define UIC_TRANSPORT_LAYER_ERROR_UNKNOWN_CPORTID UFS_BIT(1) > +#define UIC_TRANSPORT_LAYER_ERROR_NO_CONNECTION_RX UFS_BIT(2) > +#define UIC_TRANSPORT_LAYER_ERROR_CONTROLLED_SEGMENT_DROPPING UFS_BIT(3) > +#define UIC_TRANSPORT_LAYER_ERROR_BAD_TC UFS_BIT(4) > +#define UIC_TRANSPORT_LAYER_ERROR_E2E_CREDIT_OVERFLOW UFS_BIT(5) > +#define UIC_TRANSPORT_LAYER_ERROR_SAFETY_VALUE_DROPPING UFS_BIT(6) > > /* UECDME - Host UIC Error Code DME 48h */ > #define UIC_DME_ERROR UFS_BIT(31) > diff --git a/drivers/scsi/ufs/unipro.h b/drivers/scsi/ufs/unipro.h > index 816a8a4..68cfece 100644 > --- a/drivers/scsi/ufs/unipro.h > +++ b/drivers/scsi/ufs/unipro.h > @@ -49,7 +49,27 @@ > #define RX_BYPASS_8B10B_ENABLE 0x00A8 > #define RX_TERMINATION_FORCE_ENABLE 0x0089 > > +/* > + * M-RX Capability Attributes > + */ > +#define RX_HS_G1_SYNC_LENGTH_CAP 0x008B > +#define RX_HS_G1_PREP_LENGTH_CAP 0x008C > +#define RX_HS_G2_SYNC_LENGTH_CAP 0x0094 > +#define RX_HS_G3_SYNC_LENGTH_CAP 0x0095 > +#define RX_HS_G2_PREP_LENGTH_CAP 0x0096 > +#define RX_HS_G3_PREP_LENGTH_CAP 0x0097 > +#define RX_ADV_GRANULARITY_CAP 0x0098 > +#define RX_MIN_ACTIVATETIME_CAP 0x008F > +#define RX_HIBERN8TIME_CAP 0x0092 > +#define RX_ADV_HIBERN8TIME_CAP 0x0099 > +#define RX_ADV_MIN_ACTIVATETIME_CAP 0x009A > + > #define is_mphy_tx_attr(attr) (attr < RX_MODE) > +#define RX_ADV_FINE_GRAN_STEP(x) ((((x) & 0x3) << 1) | 0x1) > +#define SYNC_LEN_FINE(x) ((x) & 0x3F) > +#define SYNC_LEN_COARSE(x) ((1 << 6) | ((x) & 0x3F)) > +#define PREP_LEN(x) ((x) & 0xF) > + > /* > * PHY Adpater attributes > */ > @@ -87,6 +107,7 @@ > #define PA_PACPREQEOBTIMEOUT 0x1591 > #define PA_HIBERN8TIME 0x15A7 > #define PA_LOCALVERINFO 0x15A9 > +#define PA_GRANULARITY 0x15AA > #define PA_TACTIVATE 0x15A8 > #define PA_PACPFRAMECOUNT 0x15C0 > #define PA_PACPERRORCOUNT 0x15C1 > @@ -110,6 +131,9 @@ > #define PA_STALLNOCONFIGTIME 0x15A3 > #define PA_SAVECONFIGTIME 0x15A4 > > +/* PHY Adapter protocal constants */ > +#define PA_MAXDATALANES 4 > + > /* PA power modes */ > enum { > FAST_MODE = 1, > @@ -119,6 +143,9 @@ enum { > UNCHANGED = 7, > }; > > +#define IS_UFS_PWR_MODE_HS(m) (((m) == FAST_MODE) || ((m) == FASTAUTO_MODE)) > +#define IS_UFS_PWR_MODE_PWM(m) (((m) == SLOW_MODE) || ((m) == SLOWAUTO_MODE)) > + > /* PA TX/RX Frequency Series */ > enum { > PA_HS_MODE_A = 1, > @@ -170,6 +197,11 @@ enum ufs_hs_gear_tag { > #define DL_PEERTC1PRESENT 0x2066 > #define DL_PEERTC1RXINITCREVAL 0x2067 > > +/* Default value of L2 Timer */ > +#define FC0PROTTIMEOUTVAL 8191 > +#define TC0REPLAYTIMEOUTVAL 65535 > +#define AFC0REQTIMEOUTVAL 32767 > + > /* > * Network Layer Attributes > */ > @@ -212,4 +244,19 @@ enum { > TRUE, > }; > > +/* CPort setting */ > +#define E2EFC_ON (1 << 0) > +#define E2EFC_OFF (0 << 0) > +#define CSD_N_ON (0 << 1) > +#define CSD_N_OFF (1 << 1) > +#define CSV_N_ON (0 << 2) > +#define CSV_N_OFF (1 << 2) > +#define CPORT_DEF_FLAGS (CSV_N_OFF | CSD_N_OFF | E2EFC_OFF) > + > +/* CPort connection state */ > +enum { > + CPORT_IDLE = 0, > + CPORT_CONNECTED, > +}; > + > #endif /* _UNIPRO_H_ */ > -- > 1.7.10.4 > > -- > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > Please read the FAQ at http://www.tux.org/lkml/ -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/