Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753269AbbH0Gl2 (ORCPT ); Thu, 27 Aug 2015 02:41:28 -0400 Received: from metis.ext.pengutronix.de ([92.198.50.35]:37900 "EHLO metis.ext.pengutronix.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753037AbbH0Gl1 (ORCPT ); Thu, 27 Aug 2015 02:41:27 -0400 From: Sascha Hauer To: linux-pm@vger.kernel.org, Zhang Rui , Eduardo Valentin Cc: linux-kernel@vger.kernel.org, linux-mediatek@lists.infradead.org, Daniel Kurtz , kernel@pengutronix.de, Matthias Brugger Subject: [PATCH v7] Add Mediatek thermal support Date: Thu, 27 Aug 2015 08:41:14 +0200 Message-Id: <1440657677-2890-1-git-send-email-s.hauer@pengutronix.de> X-Mailer: git-send-email 2.5.0 X-SA-Exim-Connect-IP: 2001:67c:670:100:1d::7 X-SA-Exim-Mail-From: sha@pengutronix.de X-SA-Exim-Scanned: No (on metis.ext.pengutronix.de); SAEximRunCond expanded to false X-PTX-Original-Recipient: linux-kernel@vger.kernel.org Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 3445 Lines: 91 This series adds support for the thermal sensors included in the MT8173 SoC. Currently only basic temperature reading is supported without any interrupt support. The cpufreq driver for MT8173 is currently under review, so there's no real cooling device available in mainline. Until this is available the thermal driver can be tested with the following dts snippet. It creates a fake gpio fan and a fake trip point which is so low that it can easily be reached with a "cat /dev/zero > /dev/null" on the command line. Please review and let me know what's missing to be included in mainline. changes since v6: - remove dot in Hanyi Wus name changes since v5: - update copyright - remove unused defines Changes since v4: - give calibration constants more meaningful names (offset, slope) - Use define instead of 0x00c for register access. Changes since v3: - add include/dt-bindings/thermal/mt8173.h for to be able to use sensor names in dts files - fix disabling wrong clock in error path - remove now unused reset-names property from binding document - rename MT8173_NUM_BANKS -> MT8173_NUM_ZONES - rename MT8173_NUM_SENSING_POINTS -> MT8173_NUM_SENSORS_PER_ZONE - rename struct thermal_zone_device *tz -> struct thermal_zone_device *tzd Changes since v2: - sort #includes alphabetically - Add prefix to register defines - drop some members from struct mtk_thermal - simplify raw_to_mcelsius() - add and use more register bit defines - use device_reset() instead of devm_reset_control_get()/reset_control_reset() - misc other stuff Changes since v1: - Use "mediatek," prefix for custom properties - Drop "thermal: consistently use int for temperatures" dependency Sascha fan: gpio_fan { compatible = "gpio-fan"; gpios = <&pio 24 0>; gpio-fan,speed-map = <0 0 4500 1>; #cooling-cells = <2>; }; thermal-zones { cpu_thermal: cpu_thermal { polling-delay-passive = <1000>; /* milliseconds */ polling-delay = <1000>; /* milliseconds */ thermal-sensors = <&thermal 0>; trips { cpu_passive: cpu_passive { temperature = <47000>; /* millicelsius */ hysteresis = <2000>; /* millicelsius */ type = "passive"; }; cpu_crit { temperature = <90000>; /* millicelsius */ hysteresis = <2000>; /* millicelsius */ type = "critical"; }; }; cooling-maps { map0 { trip = <&cpu_passive>; cooling-device = <&fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; }; }; }; -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/