Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752516AbbH1Kei (ORCPT ); Fri, 28 Aug 2015 06:34:38 -0400 Received: from mail-wi0-f179.google.com ([209.85.212.179]:36502 "EHLO mail-wi0-f179.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752059AbbH1Kd7 (ORCPT ); Fri, 28 Aug 2015 06:33:59 -0400 From: Lee Jones To: linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org Cc: kernel@stlinux.com, ohad@wizery.com, devicetree@vger.kernel.org, Nathan_Lynch@mentor.com, Lee Jones , Ludovic Barre Subject: [PATCH v2 3/4] remoteproc: Supply controller driver for ST's Remote Processors Date: Fri, 28 Aug 2015 11:31:50 +0100 Message-Id: <1440757911-9120-4-git-send-email-lee.jones@linaro.org> X-Mailer: git-send-email 1.9.1 In-Reply-To: <1440757911-9120-1-git-send-email-lee.jones@linaro.org> References: <1440757911-9120-1-git-send-email-lee.jones@linaro.org> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 9141 Lines: 351 Signed-off-by: Ludovic Barre Signed-off-by: Lee Jones --- drivers/remoteproc/Kconfig | 9 ++ drivers/remoteproc/Makefile | 1 + drivers/remoteproc/st_remoteproc.c | 301 +++++++++++++++++++++++++++++++++++++ 3 files changed, 311 insertions(+) create mode 100644 drivers/remoteproc/st_remoteproc.c diff --git a/drivers/remoteproc/Kconfig b/drivers/remoteproc/Kconfig index 28c711f..72e97d7 100644 --- a/drivers/remoteproc/Kconfig +++ b/drivers/remoteproc/Kconfig @@ -77,4 +77,13 @@ config DA8XX_REMOTEPROC It's safe to say n here if you're not interested in multimedia offloading. +config ST_REMOTEPROC + tristate "ST remoteproc support" + depends on ARCH_STI + select REMOTEPROC + help + Say y here to support ST's adjunct processors via the remote + processor framework. + This can be either built-in or a loadable module. + endmenu diff --git a/drivers/remoteproc/Makefile b/drivers/remoteproc/Makefile index 81b04d1..279cb2e 100644 --- a/drivers/remoteproc/Makefile +++ b/drivers/remoteproc/Makefile @@ -11,3 +11,4 @@ obj-$(CONFIG_OMAP_REMOTEPROC) += omap_remoteproc.o obj-$(CONFIG_STE_MODEM_RPROC) += ste_modem_rproc.o obj-$(CONFIG_WKUP_M3_RPROC) += wkup_m3_rproc.o obj-$(CONFIG_DA8XX_REMOTEPROC) += da8xx_remoteproc.o +obj-$(CONFIG_ST_REMOTEPROC) += st_remoteproc.o diff --git a/drivers/remoteproc/st_remoteproc.c b/drivers/remoteproc/st_remoteproc.c new file mode 100644 index 0000000..96b784d --- /dev/null +++ b/drivers/remoteproc/st_remoteproc.c @@ -0,0 +1,301 @@ +/* + * ST's Remote Processor Control Driver + * + * Copyright (C) 2015 STMicroelectronics - All Rights Reserved + * + * Author: Ludovic Barre + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +struct st_rproc_config { + bool sw_reset; + bool pwr_reset; + u32 bootaddr_mask; +}; + +struct st_rproc { + struct st_rproc_config *config; + struct reset_control *sw_reset; + struct reset_control *pwr_reset; + struct clk *clk; + u32 clk_rate; + struct regmap *boot_base; + u32 boot_offset; +}; + +static int st_rproc_stop(struct rproc *rproc) +{ + struct st_rproc *st_rproc = rproc->priv; + int ret, err = 0; + + if (st_rproc->config->sw_reset) { + ret = reset_control_assert(st_rproc->sw_reset); + if (ret) + dev_err(&rproc->dev, "Failed to assert S/W Reset\n"); + } + + if (st_rproc->config->pwr_reset) { + err = reset_control_assert(st_rproc->pwr_reset); + if (err) + dev_err(&rproc->dev, "Failed to assert Power Reset\n"); + } + + clk_disable(st_rproc->clk); + + return ret ?: err; +} + +static int st_rproc_start(struct rproc *rproc) +{ + struct st_rproc *st_rproc = rproc->priv; + int err; + + regmap_update_bits(st_rproc->boot_base, st_rproc->boot_offset, + st_rproc->config->bootaddr_mask, rproc->bootaddr); + + err = clk_enable(st_rproc->clk); + if (err) { + dev_err(&rproc->dev, "Failed to enable clock\n"); + return err; + } + + if (st_rproc->config->sw_reset) { + err = reset_control_deassert(st_rproc->sw_reset); + if (err) { + dev_err(&rproc->dev, "Failed to deassert S/W Reset\n"); + return err; + } + } + + if (st_rproc->config->pwr_reset) { + err = reset_control_deassert(st_rproc->pwr_reset); + if (err) { + dev_err(&rproc->dev, "Failed to deassert Power Reset\n"); + return err; + } + } + + dev_info(&rproc->dev, "Started from 0x%x\n", rproc->bootaddr); + + return 0; +} + +static struct rproc_ops st_rproc_ops = { + .start = st_rproc_start, + .stop = st_rproc_stop, +}; + +/* + * Fetch state of the processor: 0 is off, 1 is on. + */ +static int st_rproc_state(struct st_rproc *st_rproc) +{ + int reset_sw, reset_pwr; + + reset_sw = st_rproc->config->sw_reset ? + reset_control_status(st_rproc->sw_reset) : 0; + + reset_pwr = st_rproc->config->pwr_reset ? + reset_control_status(st_rproc->pwr_reset) : 0; + + if (reset_sw < 0 || reset_pwr < 0) + return -EINVAL; + + return !reset_sw && !reset_pwr; +} + +static const struct st_rproc_config st40_rproc_cfg = { + .sw_reset = true, + .pwr_reset = true, + .bootaddr_mask = GENMASK(28, 1), +}; + +static const struct st_rproc_config st231_rproc_cfg = { + .sw_reset = true, + .pwr_reset = false, + .bootaddr_mask = GENMASK(31, 6), +}; + +static struct of_device_id st_rproc_match[] = { + { .compatible = "st,st40-rproc", .data = &st40_rproc_cfg }, + { .compatible = "st,st231-rproc", .data = &st231_rproc_cfg }, + {}, +}; +MODULE_DEVICE_TABLE(of, st_rproc_match); + +static int st_rproc_parse_dt(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct rproc *rproc = platform_get_drvdata(pdev); + struct st_rproc *st_rproc = rproc->priv; + struct device_node *np = dev->of_node; + struct resource *mem; + int err; + + if (st_rproc->config->sw_reset) { + st_rproc->sw_reset = devm_reset_control_get(dev, "sw_reset"); + if (IS_ERR(st_rproc->sw_reset)) { + dev_err(dev, "Failed to get S/W Reset\n"); + return PTR_ERR(st_rproc->sw_reset); + } + } + + if (st_rproc->config->pwr_reset) { + st_rproc->pwr_reset = devm_reset_control_get(dev, "pwr_reset"); + if (IS_ERR(st_rproc->pwr_reset)) { + dev_err(dev, "Failed to get Power Reset\n"); + return PTR_ERR(st_rproc->pwr_reset); + } + } + + st_rproc->clk = devm_clk_get(dev, "rproc_clk"); + if (IS_ERR(st_rproc->clk)) { + dev_err(dev, "Failed to get clock\n"); + return PTR_ERR(st_rproc->clk); + } + + err = of_property_read_u32(np, "clock-frequency", &st_rproc->clk_rate); + if (err) { + dev_err(dev, "failed to get clock frequency\n"); + return err; + } + + + st_rproc->boot_base = + syscon_regmap_lookup_by_phandle(np, "st,syscfg-boot"); + if (!st_rproc->boot_base) { + dev_err(dev, "Boot base not found\n"); + return -EINVAL; + } + + err = of_property_read_u32_index(np, "st,syscfg-boot", 1, + &st_rproc->boot_offset); + if (err) { + dev_err(dev, "Boot offset not found\n"); + return -EINVAL; + } + + mem = platform_get_resource_byname(pdev, IORESOURCE_MEM, "carveout"); + if (!mem) { + dev_err(dev, "no rproc memory definition\n"); + return -ENXIO; + } + + if (!devm_request_mem_region(dev, mem->start, + resource_size(mem), pdev->name)) { + dev_err(dev, "failed to get memory region resource\n"); + return -EBUSY; + } + err = dmam_declare_coherent_memory(dev, mem->start, mem->start, + resource_size(mem), + DMA_MEMORY_MAP | + DMA_MEMORY_EXCLUSIVE); + if (err < 0) { + dev_err(dev, "cannot declare coherent memory: %d\n", err); + return -ENXIO; + } + + err = clk_prepare(st_rproc->clk); + if (err) + dev_err(dev, "failed to get clock\n"); + + return err; +} + +static int st_rproc_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + const struct of_device_id *match; + struct st_rproc *st_rproc; + struct device_node *np = dev->of_node; + struct rproc *rproc; + int enabled; + int ret; + + match = of_match_device((st_rproc_match), dev); + if (!match || !match->data) { + dev_err(dev, "No device match found\n"); + return -ENODEV; + } + + rproc = rproc_alloc(dev, np->name, &st_rproc_ops, + NULL, sizeof(*st_rproc)); + if (!rproc) + return -ENOMEM; + + st_rproc = rproc->priv; + st_rproc->config = (struct st_rproc_config *)match->data; + platform_set_drvdata(pdev, rproc); + + ret = st_rproc_parse_dt(pdev); + if (ret) + goto free_rproc; + + ret = st_rproc_state(st_rproc); + if (ret < 0) + goto free_rproc; + enabled = ret; + + if (enabled) { + atomic_inc(&rproc->power); + rproc->state = RPROC_RUNNING; + } else { + clk_set_rate(st_rproc->clk, st_rproc->clk_rate); + } + + ret = rproc_add(rproc); + if (ret) + goto free_rproc; + + return 0; + +free_rproc: + rproc_put(rproc); + return ret; +} + +static int st_rproc_remove(struct platform_device *pdev) +{ + struct rproc *rproc = platform_get_drvdata(pdev); + struct st_rproc *st_rproc = rproc->priv; + + rproc_del(rproc); + + clk_disable_unprepare(st_rproc->clk); + + rproc_put(rproc); + + return 0; +} + +static struct platform_driver st_rproc_driver = { + .probe = st_rproc_probe, + .remove = st_rproc_remove, + .driver = { + .name = "st-rproc", + .of_match_table = of_match_ptr(st_rproc_match), + }, +}; +module_platform_driver(st_rproc_driver); + +MODULE_DESCRIPTION("ST Remote Processor Control Driver"); +MODULE_AUTHOR("Ludovic.barre "); +MODULE_LICENSE("GPL v2"); -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/