From: Marcel Ziswiler <marcel.ziswiler@toradex.com>
To: linux-tegra@vger.kernel.org
Cc: Marcel Ziswiler <marcel.ziswiler@toradex.com>,
        Russell King <linux@arm.linux.org.uk>,
        Thierry Reding <thierry.reding@gmail.com>, devicetree@vger.kernel.org,
        Kumar Gala <galak@codeaurora.org>,
        Stephen Warren <swarren@wwwdotorg.org>, linux-kernel@vger.kernel.org,
        Ian Campbell <ijc+devicetree@hellion.org.uk>,
        Rob Herring <robh+dt@kernel.org>, Pawel Moll <pawel.moll@arm.com>,
        Mark Rutland <mark.rutland@arm.com>,
        Alexandre Courbot <gnurou@gmail.com>,
        linux-arm-kernel@lists.infradead.org
Subject: [PATCH 7/9] arm: tegra: apalis_t30: set otg dr_mode for eval board
Date: Fri, 28 Aug 2015 14:42:34 +0200
Message-Id: <1440765756-1382-8-git-send-email-marcel.ziswiler@toradex.com>
In-Reply-To: <1440765756-1382-1-git-send-email-marcel.ziswiler@toradex.com>
References: <1440765756-1382-1-git-send-email-marcel.ziswiler@toradex.com>
Sender: linux-kernel-owner@vger.kernel.org
Content-Length: 985
Lines: 31

This has currently no functional effect as neither USB device nor OTG
is currently supported on any Tegras in mainline as of yet. However
once we use the same device tree on U-Boot this will actually make it
work properly there.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
---

 arch/arm/boot/dts/tegra30-apalis-eval.dts | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/boot/dts/tegra30-apalis-eval.dts b/arch/arm/boot/dts/tegra30-apalis-eval.dts
index 5a49f03..37437c6 100644
--- a/arch/arm/boot/dts/tegra30-apalis-eval.dts
+++ b/arch/arm/boot/dts/tegra30-apalis-eval.dts
@@ -153,6 +153,7 @@
 
 	usb-phy@7d000000 {
 		status = "okay";
+		dr_mode = "otg";
 		vbus-supply = <&usbo1_vbus_reg>;
 	};
 
-- 
2.4.3

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/