Subject: Re: [PATCH V6 1/1] usb:serial: Add Fintek F81532/534 driver
To: Oliver Neukum <oneukum@suse.com>
References: <1446522669-18987-1-git-send-email-hpeter+linux_kernel@gmail.com>
 <1446545007.27681.12.camel@suse.com>
Cc: johan@kernel.org, gregkh@linuxfoundation.org, linux-usb@vger.kernel.org,
        linux-kernel@vger.kernel.org, tom_tsai@fintek.com.tw,
        peter_hong@fintek.com.tw, Peter Hung <hpeter+linux_kernel@gmail.com>
From: Peter Hung <hpeter@gmail.com>
Message-ID: <5639BF9B.2040005@gmail.com>
Date: Wed, 4 Nov 2015 16:19:39 +0800
User-Agent: Mozilla/5.0 (Windows NT 10.0; WOW64; rv:38.0) Gecko/20100101
 Thunderbird/38.3.0
MIME-Version: 1.0
In-Reply-To: <1446545007.27681.12.camel@suse.com>
Content-Type: text/plain; charset=utf-8; format=flowed
Content-Transfer-Encoding: 8bit
Sender: linux-kernel-owner@vger.kernel.org
Content-Length: 4240
Lines: 136

Hi

Oliver Neukum 於 2015/11/3 下午 06:03 寫道:
> On Tue, 2015-11-03 at 11:51 +0800, Peter Hung wrote:
>> +static int f81534_attach(struct usb_serial *serial)
>> +{
>> +	struct f81534_serial_private *serial_priv = NULL;
>> +	int status;
>> +	int i;
>> +	int offset;
>> +	uintptr_t setting_idx = (uintptr_t) usb_get_serial_data(serial);
>> +
>> +	serial_priv = kzalloc(sizeof(*serial_priv), GFP_KERNEL);
>> +	if (!serial_priv)
>> +		return -ENOMEM;
>> +
>> +	usb_set_serial_data(serial, serial_priv);
>> +	serial_priv->setting_idx = setting_idx;
>> +
>> +	for (i = 0; i < F81534_NUM_PORT; ++i) {
>> +		/* Disable all interrupt before submit URB */
>> +		status = f81534_setregister(serial->dev, i,
>> +					INTERRUPT_ENABLE_REGISTER, 0x00);
>> +		if (status) {
>> +			dev_err(&serial->dev->dev, "%s: IER disable failed\n",
>> +					__func__);
>> +			goto failed;
>> +		}
>> +	}
>> +
>> +	for (i = 0; i < F81534_NUM_PORT; ++i)
>> +		atomic_set(&serial_priv->port_active[i], 0);
>
> Should be ATOMIC_INIT()
>

ATOMIC_INIT() seems to be used only for variable initializer, It cant be
used for dynamic allocation. Should I change it to a normal boolean
flag protecting with spin_lock ?


>> +static int f81534_port_remove(struct usb_serial_port *port)
>> +{
>> +	struct f81534_port_private *port_priv;
>> +
>> +	f81534_release_gpio(port);
>> +	port_priv = usb_get_serial_port_data(port);
>> +	kfree(port_priv);
>> +	return 0;
>> +}
>> +
>> +static void f81534_compare_msr(struct usb_serial_port *port, u8 *msr,
>
> Is the point of passing a pointer to msr locking?
>
>> +				bool is_port_open)

This function is used only with URB callback function. The *msr is
reported by H/W with newest MSR. The USB-Serial generic system will
re-submit read URB when callback complete. So this function should
run once on the same time.

>> +static int f81534_tiocmget(struct tty_struct *tty)
>> +{
>> +	struct usb_serial_port *port = tty->driver_data;
>> +	struct f81534_port_private *port_priv = usb_get_serial_port_data(port);
>> +	unsigned long flags;
>> +	int r;
>> +	u8 msr, mcr;
>> +
>> +	/*
>> +	 * We'll avoid to direct read MSR register. The IC will read the MSR
>> +	 * changed and report it f81534_process_per_serial_block() by
>> +	 * F81534_TOKEN_MSR_CHANGE.
>> +	 *
>> +	 * When this device in heavy loading (e.g., BurnInTest Loopback Test)
>> +	 * The report of MSR register will delay received a bit. It's due to
>> +	 * MSR interrupt is lowest priority in 16550A. So we decide to sleep
>> +	 * a little time to pass the test.
>> +	 */
>> +	if (schedule_timeout_interruptible(
>> +			msecs_to_jiffies(F81534_DELAY_READ_MSR))) {
>> +		dev_info(&port->dev, "%s: breaked !!\n", __func__);
>> +	}
>
> Is the delay necessary or isn't it?
> If it is necessary you should do something about the signal.
>

We add this delay due to stress test (Loop-back & 921600bps with
BurnInTest). It'll receive MSR with some delay when connecting with
DTR-DSR & RTS/CTS, but the delay smaller than 10ms. So we decided to
delay some time to pass the test.

>> +static int f81534_prepare_write_buffer(struct usb_serial_port *port,
>> +					void *dest, size_t size)
>> +{
>> +	unsigned char *ptr = (unsigned char *) dest;
>> +	struct f81534_port_private *port_priv = usb_get_serial_port_data(port);
>> +	int port_num = port_priv->phy;
>> +	struct usb_serial *serial = port->serial;
>> +
>> +	WARN_ON(size != serial->port[0]->bulk_out_size);
>> +
>> +	if (size != F81534_WRITE_BUFFER_SIZE) {
>> +		WARN_ON(size != F81534_WRITE_BUFFER_SIZE);
>
> What is the sense of this?
>

I'll remove the double-check section with next version patch.


>> +	ptr[F81534_RECEIVE_BLOCK_SIZE * 0] = 0;
>> +	ptr[F81534_RECEIVE_BLOCK_SIZE * 1] = 1;
>> +	ptr[F81534_RECEIVE_BLOCK_SIZE * 2] = 2;
>> +	ptr[F81534_RECEIVE_BLOCK_SIZE * 3] = 3;
>
> Either these ...
>
>> +	ptr[F81534_RECEIVE_BLOCK_SIZE * port_num + 0] = port_num;
>
> .. or that is redundant
>

I'll remove it too.

Thanks for your advice.
-- 
With Best Regards,
Peter Hung
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/