Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1031588AbbKDWYR (ORCPT ); Wed, 4 Nov 2015 17:24:17 -0500 Received: from mail.savoirfairelinux.com ([208.88.110.44]:37307 "EHLO mail.savoirfairelinux.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1031059AbbKDWYM (ORCPT ); Wed, 4 Nov 2015 17:24:12 -0500 From: Vivien Didelot To: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org, kernel@savoirfairelinux.com, "David S. Miller" , Florian Fainelli , Andrew Lunn , Vivien Didelot Subject: [PATCH net] net: dsa: mv88e6xxx: isolate unbridged ports Date: Wed, 4 Nov 2015 17:23:40 -0500 Message-Id: <1446675820-25608-1-git-send-email-vivien.didelot@savoirfairelinux.com> X-Mailer: git-send-email 2.6.2 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 5175 Lines: 135 The DSA documentation specifies that each port must be capable of forwarding frames to the CPU port. The last changes on bridging support for the mv88e6xxx driver broke this requirement for non-bridged ports. So as for the bridged ports, reserve a few VLANs (4000+) in the switch to isolate ports that have not been bridged yet. By default, a port will be isolated with the CPU and DSA ports. When the port joins a bridge, it will leave its reserved port. When it is removed from a bridge, it will join its reserved VLAN again. Fixes: 5fe7f68016ff ("net: dsa: mv88e6xxx: fix hardware bridging") Reported-by: Andrew Lunn Signed-off-by: Vivien Didelot --- drivers/net/dsa/mv88e6171.c | 2 ++ drivers/net/dsa/mv88e6352.c | 2 ++ drivers/net/dsa/mv88e6xxx.c | 42 ++++++++++++++++++++++++++++++++++++++++++ drivers/net/dsa/mv88e6xxx.h | 2 ++ 4 files changed, 48 insertions(+) diff --git a/drivers/net/dsa/mv88e6171.c b/drivers/net/dsa/mv88e6171.c index 54aa000..6e18213 100644 --- a/drivers/net/dsa/mv88e6171.c +++ b/drivers/net/dsa/mv88e6171.c @@ -103,6 +103,8 @@ struct dsa_switch_driver mv88e6171_switch_driver = { #endif .get_regs_len = mv88e6xxx_get_regs_len, .get_regs = mv88e6xxx_get_regs, + .port_join_bridge = mv88e6xxx_port_bridge_join, + .port_leave_bridge = mv88e6xxx_port_bridge_leave, .port_stp_update = mv88e6xxx_port_stp_update, .port_pvid_get = mv88e6xxx_port_pvid_get, .port_vlan_prepare = mv88e6xxx_port_vlan_prepare, diff --git a/drivers/net/dsa/mv88e6352.c b/drivers/net/dsa/mv88e6352.c index ff846d0..cc6c545 100644 --- a/drivers/net/dsa/mv88e6352.c +++ b/drivers/net/dsa/mv88e6352.c @@ -323,6 +323,8 @@ struct dsa_switch_driver mv88e6352_switch_driver = { .set_eeprom = mv88e6352_set_eeprom, .get_regs_len = mv88e6xxx_get_regs_len, .get_regs = mv88e6xxx_get_regs, + .port_join_bridge = mv88e6xxx_port_bridge_join, + .port_leave_bridge = mv88e6xxx_port_bridge_leave, .port_stp_update = mv88e6xxx_port_stp_update, .port_pvid_get = mv88e6xxx_port_pvid_get, .port_vlan_prepare = mv88e6xxx_port_vlan_prepare, diff --git a/drivers/net/dsa/mv88e6xxx.c b/drivers/net/dsa/mv88e6xxx.c index 04cff58..b06dba0 100644 --- a/drivers/net/dsa/mv88e6xxx.c +++ b/drivers/net/dsa/mv88e6xxx.c @@ -1462,6 +1462,10 @@ int mv88e6xxx_port_vlan_prepare(struct dsa_switch *ds, int port, const struct switchdev_obj_port_vlan *vlan, struct switchdev_trans *trans) { + /* We reserve a few VLANs to isolate unbridged ports */ + if (vlan->vid_end >= 4000) + return -EOPNOTSUPP; + /* We don't need any dynamic resource from the kernel (yet), * so skip the prepare phase. */ @@ -1870,6 +1874,36 @@ unlock: return err; } +int mv88e6xxx_port_bridge_join(struct dsa_switch *ds, int port, u32 members) +{ + struct mv88e6xxx_priv_state *ps = ds_to_priv(ds); + const u16 pvid = 4000 + ds->index * DSA_MAX_PORTS + port; + int err; + + /* The port joined a bridge, so leave its reserved VLAN */ + mutex_lock(&ps->smi_mutex); + err = _mv88e6xxx_port_vlan_del(ds, port, pvid); + if (!err) + err = _mv88e6xxx_port_pvid_set(ds, port, 0); + mutex_unlock(&ps->smi_mutex); + return err; +} + +int mv88e6xxx_port_bridge_leave(struct dsa_switch *ds, int port, u32 members) +{ + struct mv88e6xxx_priv_state *ps = ds_to_priv(ds); + const u16 pvid = 4000 + ds->index * DSA_MAX_PORTS + port; + int err; + + /* The port left the bridge, so join its reserved VLAN */ + mutex_lock(&ps->smi_mutex); + err = _mv88e6xxx_port_vlan_add(ds, port, pvid, true); + if (!err) + err = _mv88e6xxx_port_pvid_set(ds, port, pvid); + mutex_unlock(&ps->smi_mutex); + return err; +} + static void mv88e6xxx_bridge_work(struct work_struct *work) { struct mv88e6xxx_priv_state *ps; @@ -2140,6 +2174,14 @@ int mv88e6xxx_setup_ports(struct dsa_switch *ds) ret = mv88e6xxx_setup_port(ds, i); if (ret < 0) return ret; + + if (dsa_is_cpu_port(ds, i) || dsa_is_dsa_port(ds, i)) + continue; + + /* setup the unbridged state */ + ret = mv88e6xxx_port_bridge_leave(ds, i, 0); + if (ret < 0) + return ret; } return 0; } diff --git a/drivers/net/dsa/mv88e6xxx.h b/drivers/net/dsa/mv88e6xxx.h index fb9a873..21c8daa 100644 --- a/drivers/net/dsa/mv88e6xxx.h +++ b/drivers/net/dsa/mv88e6xxx.h @@ -468,6 +468,8 @@ int mv88e6xxx_phy_write_indirect(struct dsa_switch *ds, int addr, int regnum, int mv88e6xxx_get_eee(struct dsa_switch *ds, int port, struct ethtool_eee *e); int mv88e6xxx_set_eee(struct dsa_switch *ds, int port, struct phy_device *phydev, struct ethtool_eee *e); +int mv88e6xxx_port_bridge_join(struct dsa_switch *ds, int port, u32 members); +int mv88e6xxx_port_bridge_leave(struct dsa_switch *ds, int port, u32 members); int mv88e6xxx_port_stp_update(struct dsa_switch *ds, int port, u8 state); int mv88e6xxx_port_vlan_prepare(struct dsa_switch *ds, int port, const struct switchdev_obj_port_vlan *vlan, -- 2.6.2 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/