Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1032194AbbKELJ3 (ORCPT ); Thu, 5 Nov 2015 06:09:29 -0500 Received: from mailgw02.mediatek.com ([210.61.82.184]:35960 "EHLO mailgw02.mediatek.com" rhost-flags-OK-FAIL-OK-FAIL) by vger.kernel.org with ESMTP id S1031943AbbKELJ1 (ORCPT ); Thu, 5 Nov 2015 06:09:27 -0500 X-Listener-Flag: 11101 Message-ID: <1446721761.4016.56.camel@mtksdaap41> Subject: Re: [PATCH v3 0/2] thermal: mediatek: Add cpu power cooling model From: dawei chien To: Viresh Kumar CC: "Rafael J. Wysocki" , Rob Herring , Pawel Moll , Mark Rutland , Ian Campbell , "Kumar Gala" , Matthias Brugger , Daniel Kurtz , Sascha Hauer , Daniel Lezcano , , , , , , , Sascha Hauer Date: Thu, 5 Nov 2015 19:09:21 +0800 In-Reply-To: <20151102121034.GA3639@ubuntu> References: <1445515359-8587-1-git-send-email-dawei.chien@mediatek.com> <20151028154449.GH3716@ubuntu> <1446461181.10039.28.camel@mtksdaap41> <20151102121034.GA3639@ubuntu> Content-Type: text/plain; charset="UTF-8" X-Mailer: Evolution 3.2.3-0ubuntu6 Content-Transfer-Encoding: 7bit MIME-Version: 1.0 X-MTK: N Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 4544 Lines: 105 On Mon, 2015-11-02 at 17:40 +0530, Viresh Kumar wrote: > On 02-11-15, 18:46, dawei chien wrote: > > On Wed, 2015-10-28 at 21:14 +0530, Viresh Kumar wrote: > > > Sorry for being extremely late in reviewing this stuff. You are > > > already on v3 and I haven't reviewed it once. Mostly due to bad timing > > > of my holidays and other work pressure. > > > > You're welcome, truly thank you for your kindly reviewing > > Thanks for understanding. > > > > Now, there are few things that I feel are not properly addressed here, > > > and I may be wrong: > > > - Where are the bindings for static-power-points and > > > dynamic-power-coefficient. Sorry I failed to see them in this or > > > other series you mentioned. > > > > Please refer to following document (2-1,2-2) for dynamic-power & > > static-power in detail. Besides, do I need to add another document for > > our own MT8173 IC. > > http://lxr.free-electrons.com/source/Documentation/thermal/cpu-cooling-api.txt > > That's about the power-API, but I am talking about the Device Tree > bindings here. So, when you add any new DT bindings (Or a new property > in device tree blobs), you need to add its documentation in > Documentation/devicetree/bindings/... and get it approved by DT > maintainers as well. You perhaps missed that completely, otherwise you > would have been told really early that the new bindings aren't going > to help. Thank you for your kindly explaining, now I could understand what I miss, I will send device tree binding on next version such like following description. --- a/Documentation/devicetree/bindings/clock/mt8173-cpu-dvfs.txt +++ b/Documentation/devicetree/bindings/clock/mt8173-cpu-dvfs.txt @@ -10,6 +10,17 @@ Required properties: Please refer to Documentation/devicetree/bindings/clk/clock-bindings.txt for generic clock consumer properties. - proc-supply: Regulator for Vproc of CPU cluster. +- dynamic-power-coefficient: + Usage: optional + Value type: + Definition: A u32 value that represents an indicative + running time dynamic power coefficient in + fundamental units of mW/MHz/uVolt^2. + The dynamic energy consumption of the CPU + is proportional to the square of the + Voltage (V) and the clock frequency (f). + Pdyn = dynamic-power-coefficient * V^2 * f + where voltage is in uV, frequency is in MHz. > > > - Even then, why should we be adding another table into DT for > > > voltage/power ? And not reuse and extend the opp-v2 stuff which is > > > already mainlined now. > > > > We could reuse opp-v2 for static power points after OPPV2 back port to > > our currently branch. > > Your current branch doesn't matter to us. All that matters here is > mainline, that's where you are adding code to. And you must test your > stuff on the latest upstream branch only, not on some old kernel > release. You can include other dependency patches though, that are > required to make it work and mention them in cover-letter. Thank you for your kindly explaining, Now I know I should develop and test on mainline branch since this is where I try to add code. However, please understanding currently mt8173_cpufreq.c is not ready for OPPV2 in mainline as far, that's the reason why currently I can't reuse OPPV2 and extend for static power table. My propose is for adding CPU cooling device for our own product. Actually, I would like to remove static power table on next patch since static power is optional and dynamic power is much more than static power. > > However, as far as I know, there is no "power" in opp.c (suck like > > s/suck/such ? > > > opp-hz) as far, so I need to add something in opp.c for my purpose, suck > > like add power in _opp_add_static_v2, and add something for return > > "power", right? I may be wrong, please kindly give me your suggestion, > > thank you. > > You first need to propose a change in DT bindings for OPPs: > Documentation/devicetree/bindings/opp/opp.txt > > And then we can change the code properly. > > > Actually, I am considering to remove the part of static power point > > since it is optional for Power Model. Could you agree with this? > > If its not important for your platform, then I don't have any issues > with that.. > -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/