Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1757461AbbKFPsV (ORCPT ); Fri, 6 Nov 2015 10:48:21 -0500 Received: from mailgw01.mediatek.com ([210.61.82.183]:34804 "EHLO mailgw01.mediatek.com" rhost-flags-OK-FAIL-OK-FAIL) by vger.kernel.org with ESMTP id S1757357AbbKFPsT (ORCPT ); Fri, 6 Nov 2015 10:48:19 -0500 X-Listener-Flag: 11101 From: Bayi Cheng To: David Woodhouse , Brian Norris CC: Rob Herring , Pawel Moll , Mark Rutland , Ian Campbell , Kumar Gala , Matthias Brugger , Daniel Kurtz , Sascha Hauer , , , , , , , , Subject: [PATCH v6 0/3] Mediatek SPI-NOR flash driver Date: Fri, 6 Nov 2015 23:48:06 +0800 Message-ID: <1446824889-16144-1-git-send-email-bayi.cheng@mediatek.com> X-Mailer: git-send-email 1.8.1.1.dirty MIME-Version: 1.0 Content-Type: text/plain X-MTK: N Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 2451 Lines: 66 This series is based on v4.3-rc1 and l2-mtd.git [0] and erase_sector implementation patch [1] [0]: git://git.infradead.org/l2-mtd.git [1]: http://lists.infradead.org/pipermail/linux-mtd/2015-October//062959.html Change in v6: 1: delete mt8173_nor_do_rx 2: delete mt8173_nor_do_rx 3: add mt8173_nor_do_tx_rx for general usage 4: support nor flash with 6 IDs 5: delete mt8173_nor_erase_sector and use "nor->erase_opcode" 6: add mt8173_nor_set_addr to programming the address register 7: initialize the ppdata in mtk_nor_init Change in v5: 1: add "status = "disable"" to device tree 2: add document "flash" node 3: fix some statement error in Kconfig file 4: fix alphabetical order error in makefile 5: delete the parament "mtd_info *mtd" in mt8173_nor structure 6: delete SPINOR_OP_WREN repeated calls 7: add mt8173_nor_do_tx & mt8173_nor_do_rx for them full potential 8: use a subnode to represent the flash Change in v4: 1: delete the parament "write_enable" for mt8173_nor_write_reg 2: fix the build warning for calling mt8173_nor_write_single_byte Change in v3: 1: use switch() to replace some if-else statement 2: use shifts to replace endianness statement 3: delete some unused macros 4: use auto-increment mechanism for single write 5: write address added to 32bytes Change in v2: 1. Rebase to 4.3-rc1 2. propagate error code 3. delete mux clock and axi clock in dts file 4. descripts more exactly for binding file 5. change file names from mtk-nor.c to mtk_quadspi.c 6. delete some functions witch were used once time Bayi Cheng (3): doc: dt: add documentation for Mediatek spi-nor controller mtd: mtk-nor: mtk serial flash controller driver arm64: dts: mt8173: Add nor flash node .../devicetree/bindings/mtd/mtk-quadspi.txt | 41 ++ arch/arm64/boot/dts/mediatek/mt8173.dtsi | 16 + drivers/mtd/spi-nor/Kconfig | 7 + drivers/mtd/spi-nor/Makefile | 1 + drivers/mtd/spi-nor/mtk-quadspi.c | 475 +++++++++++++++++++++ 5 files changed, 540 insertions(+) create mode 100644 Documentation/devicetree/bindings/mtd/mtk-quadspi.txt create mode 100644 drivers/mtd/spi-nor/mtk-quadspi.c -- 1.8.1.1.dirty -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/