Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752959AbbKLCTx (ORCPT ); Wed, 11 Nov 2015 21:19:53 -0500 Received: from mga01.intel.com ([192.55.52.88]:55626 "EHLO mga01.intel.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752513AbbKLCTu (ORCPT ); Wed, 11 Nov 2015 21:19:50 -0500 X-ExtLoop1: 1 X-IronPort-AV: E=Sophos;i="5.20,279,1444719600"; d="scan'208";a="598717555" From: Lu Baolu To: Mathias Nyman , Greg Kroah-Hartman , Alan Stern Cc: linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org, Lu Baolu , stable@vger.kernel.org Subject: [PATCH v2 1/3] usb: core: lpm: fix usb3_hardware_lpm sysfs node Date: Thu, 12 Nov 2015 10:19:36 +0800 Message-Id: <1447294778-27917-2-git-send-email-baolu.lu@linux.intel.com> X-Mailer: git-send-email 2.1.4 In-Reply-To: <1447294778-27917-1-git-send-email-baolu.lu@linux.intel.com> References: <1447294778-27917-1-git-send-email-baolu.lu@linux.intel.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 8848 Lines: 244 Commit 655fe4effe0f ("usbcore: add sysfs support to xHCI usb3 hardware LPM") introduced usb3_hardware_lpm sysfs node. This doesn't show the correct status of USB3 U1 and U2 LPM status. This patch fixes this by replacing usb3_hardware_lpm with two nodes, usb3_hardware_lpm_u1 (for U1) and usb3_hardware_lpm_u2 (for U2), and recording the U1/U2 LPM status in right places. This patch should be back-ported to kernels as old as 4.3, that contains Commit 655fe4effe0f ("usbcore: add sysfs support to xHCI usb3 hardware LPM"). Cc: stable@vger.kernel.org Signed-off-by: Lu Baolu --- Documentation/ABI/testing/sysfs-bus-usb | 16 +++++++++------- Documentation/usb/power-management.txt | 11 ++++++----- drivers/usb/core/hub.c | 20 ++++++++++++++------ drivers/usb/core/sysfs.c | 31 ++++++++++++++++++++++++++----- include/linux/usb.h | 4 ++++ 5 files changed, 59 insertions(+), 23 deletions(-) diff --git a/Documentation/ABI/testing/sysfs-bus-usb b/Documentation/ABI/testing/sysfs-bus-usb index 3a4abfc..136ba17 100644 --- a/Documentation/ABI/testing/sysfs-bus-usb +++ b/Documentation/ABI/testing/sysfs-bus-usb @@ -134,19 +134,21 @@ Description: enabled for the device. Developer can write y/Y/1 or n/N/0 to the file to enable/disable the feature. -What: /sys/bus/usb/devices/.../power/usb3_hardware_lpm -Date: June 2015 +What: /sys/bus/usb/devices/.../power/usb3_hardware_lpm_u1 + /sys/bus/usb/devices/.../power/usb3_hardware_lpm_u2 +Date: November 2015 Contact: Kevin Strasser + Lu Baolu Description: If CONFIG_PM is set and a USB 3.0 lpm-capable device is plugged in to a xHCI host which supports link PM, it will check if U1 and U2 exit latencies have been set in the BOS descriptor; if - the check is is passed and the host supports USB3 hardware LPM, + the check is passed and the host supports USB3 hardware LPM, USB3 hardware LPM will be enabled for the device and the USB - device directory will contain a file named - power/usb3_hardware_lpm. The file holds a string value (enable - or disable) indicating whether or not USB3 hardware LPM is - enabled for the device. + device directory will contain two files named + power/usb3_hardware_lpm_u1 and power/usb3_hardware_lpm_u2. These + files hold a string value (enable or disable) indicating whether + or not USB3 hardware LPM U1 or U2 is enabled for the device. What: /sys/bus/usb/devices/.../removable Date: February 2012 diff --git a/Documentation/usb/power-management.txt b/Documentation/usb/power-management.txt index 4a15c90..0a94ffe 100644 --- a/Documentation/usb/power-management.txt +++ b/Documentation/usb/power-management.txt @@ -537,17 +537,18 @@ relevant attribute files are usb2_hardware_lpm and usb3_hardware_lpm. can write y/Y/1 or n/N/0 to the file to enable/disable USB2 hardware LPM manually. This is for test purpose mainly. - power/usb3_hardware_lpm + power/usb3_hardware_lpm_u1 + power/usb3_hardware_lpm_u2 When a USB 3.0 lpm-capable device is plugged in to a xHCI host which supports link PM, it will check if U1 and U2 exit latencies have been set in the BOS descriptor; if the check is is passed and the host supports USB3 hardware LPM, USB3 hardware LPM will be - enabled for the device and this file will be created. - The file holds a string value (enable or disable) - indicating whether or not USB3 hardware LPM is - enabled for the device. + enabled for the device and these files will be created. + The files hold a string value (enable or disable) + indicating whether or not USB3 hardware LPM U1 or U2 + is enabled for the device. USB Port Power Control ---------------------- diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index bdeadc1..4eb7369 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -3875,17 +3875,23 @@ static void usb_enable_link_state(struct usb_hcd *hcd, struct usb_device *udev, return; } - if (usb_set_lpm_timeout(udev, state, timeout)) + ret = usb_set_lpm_timeout(udev, state, timeout); + if (ret) /* If we can't set the parent hub U1/U2 timeout, * device-initiated LPM won't be allowed either, so let the xHCI * host know that this link state won't be enabled. */ hcd->driver->disable_usb3_lpm_timeout(hcd, udev, state); - /* Only a configured device will accept the Set Feature U1/U2_ENABLE */ else if (udev->actconfig) usb_set_device_initiated_lpm(udev, state, true); + if (!ret) { + if (state == USB3_LPM_U1) + udev->usb3_lpm_u1_enabled = 1; + else if (state == USB3_LPM_U2) + udev->usb3_lpm_u2_enabled = 1; + } } /* @@ -3925,6 +3931,12 @@ static int usb_disable_link_state(struct usb_hcd *hcd, struct usb_device *udev, dev_warn(&udev->dev, "Could not disable xHCI %s timeout, " "bus schedule bandwidth may be impacted.\n", usb3_lpm_names[state]); + + if (state == USB3_LPM_U1) + udev->usb3_lpm_u1_enabled = 0; + else if (state == USB3_LPM_U2) + udev->usb3_lpm_u2_enabled = 0; + return 0; } @@ -3959,8 +3971,6 @@ int usb_disable_lpm(struct usb_device *udev) if (usb_disable_link_state(hcd, udev, USB3_LPM_U2)) goto enable_lpm; - udev->usb3_lpm_enabled = 0; - return 0; enable_lpm: @@ -4018,8 +4028,6 @@ void usb_enable_lpm(struct usb_device *udev) usb_enable_link_state(hcd, udev, USB3_LPM_U1); usb_enable_link_state(hcd, udev, USB3_LPM_U2); - - udev->usb3_lpm_enabled = 1; } EXPORT_SYMBOL_GPL(usb_enable_lpm); diff --git a/drivers/usb/core/sysfs.c b/drivers/usb/core/sysfs.c index d9ec2de..65b6e6b 100644 --- a/drivers/usb/core/sysfs.c +++ b/drivers/usb/core/sysfs.c @@ -531,7 +531,7 @@ static ssize_t usb2_lpm_besl_store(struct device *dev, } static DEVICE_ATTR_RW(usb2_lpm_besl); -static ssize_t usb3_hardware_lpm_show(struct device *dev, +static ssize_t usb3_hardware_lpm_u1_show(struct device *dev, struct device_attribute *attr, char *buf) { struct usb_device *udev = to_usb_device(dev); @@ -539,7 +539,7 @@ static ssize_t usb3_hardware_lpm_show(struct device *dev, usb_lock_device(udev); - if (udev->usb3_lpm_enabled) + if (udev->usb3_lpm_u1_enabled) p = "enabled"; else p = "disabled"; @@ -548,7 +548,26 @@ static ssize_t usb3_hardware_lpm_show(struct device *dev, return sprintf(buf, "%s\n", p); } -static DEVICE_ATTR_RO(usb3_hardware_lpm); +static DEVICE_ATTR_RO(usb3_hardware_lpm_u1); + +static ssize_t usb3_hardware_lpm_u2_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct usb_device *udev = to_usb_device(dev); + const char *p; + + usb_lock_device(udev); + + if (udev->usb3_lpm_u2_enabled) + p = "enabled"; + else + p = "disabled"; + + usb_unlock_device(udev); + + return sprintf(buf, "%s\n", p); +} +static DEVICE_ATTR_RO(usb3_hardware_lpm_u2); static struct attribute *usb2_hardware_lpm_attr[] = { &dev_attr_usb2_hardware_lpm.attr, @@ -562,7 +581,8 @@ static struct attribute_group usb2_hardware_lpm_attr_group = { }; static struct attribute *usb3_hardware_lpm_attr[] = { - &dev_attr_usb3_hardware_lpm.attr, + &dev_attr_usb3_hardware_lpm_u1.attr, + &dev_attr_usb3_hardware_lpm_u2.attr, NULL, }; static struct attribute_group usb3_hardware_lpm_attr_group = { @@ -592,7 +612,8 @@ static int add_power_attributes(struct device *dev) if (udev->usb2_hw_lpm_capable == 1) rc = sysfs_merge_group(&dev->kobj, &usb2_hardware_lpm_attr_group); - if (udev->lpm_capable == 1) + if (udev->speed == USB_SPEED_SUPER && + udev->lpm_capable == 1) rc = sysfs_merge_group(&dev->kobj, &usb3_hardware_lpm_attr_group); } diff --git a/include/linux/usb.h b/include/linux/usb.h index b9a2807..b79925d 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -511,6 +511,8 @@ struct usb3_lpm_parameters { * @usb2_hw_lpm_enabled: USB2 hardware LPM is enabled * @usb2_hw_lpm_allowed: Userspace allows USB 2.0 LPM to be enabled * @usb3_lpm_enabled: USB3 hardware LPM enabled + * @usb3_lpm_u1_enabled: USB3 hardware U1 LPM enabled + * @usb3_lpm_u2_enabled: USB3 hardware U2 LPM enabled * @string_langid: language ID for strings * @product: iProduct string, if present (static) * @manufacturer: iManufacturer string, if present (static) @@ -584,6 +586,8 @@ struct usb_device { unsigned usb2_hw_lpm_enabled:1; unsigned usb2_hw_lpm_allowed:1; unsigned usb3_lpm_enabled:1; + unsigned usb3_lpm_u1_enabled:1; + unsigned usb3_lpm_u2_enabled:1; int string_langid; /* static strings from the device */ -- 2.1.4 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/