Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754113AbbKLJ0A (ORCPT ); Thu, 12 Nov 2015 04:26:00 -0500 Received: from mail-wm0-f48.google.com ([74.125.82.48]:38708 "EHLO mail-wm0-f48.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754054AbbKLJZ4 (ORCPT ); Thu, 12 Nov 2015 04:25:56 -0500 Subject: Re: [RFC 1/4] iio: ina2xx: add direct IO support for TI INA2xx Power Monitors To: Daniel Baluta References: <1447171653-12756-1-git-send-email-mtitinger@baylibre.com> <1447171653-12756-2-git-send-email-mtitinger@baylibre.com> Cc: Jonathan Cameron , Hartmut Knaack , Lars-Peter Clausen , Peter Meerwald , "linux-iio@vger.kernel.org" , Linux Kernel Mailing List , mturquette@baylibre.com, bcousson@baylibre.com, ptitiano@baylibre.com From: Marc Titinger Message-ID: <56445B22.2050903@baylibre.com> Date: Thu, 12 Nov 2015 10:25:54 +0100 User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:38.0) Gecko/20100101 Thunderbird/38.2.0 MIME-Version: 1.0 In-Reply-To: Content-Type: text/plain; charset=utf-8; format=flowed Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 3062 Lines: 133 On 11/11/2015 11:14, Daniel Baluta wrote: > On Tue, Nov 10, 2015 at 6:07 PM, Marc Titinger wrote: >> Basic support or direct IO raw read, with averaging attribute. >> Values are RAW, INT_PLUS_MICRO (Volt/Ampere/Watt). >> Hi Daniel, thanks for the review, comments bellow, Marc. >> IIO context has 1 devices: > Is this from libiio right? Perhaps you should specify this: > > "libiio context has 1 devices" It's the raw output from iio_info to give a quick overview of the features. > >> iio:device0: ina226 >> 4 channels found: >> power3: (input) >> 1 channel-specific attributes found: >> attr 0: raw value: 1.150000 >> voltage0: (input) >> 1 channel-specific attributes found: >> attr 0: raw value: 0.000003 >> voltage1: (input) >> 1 channel-specific attributes found: >> attr 0: raw value: 4.277500 >> current2: (input) >> 1 channel-specific attributes found: >> attr 0: raw value: 0.268000 >> 2 device-specific attributes found: >> attr 0: in_calibscale value: 10000 >> attr 1: in_mean_raw value: 4 >> >> > > Link to datasheet? Ok, will add it. http://www.ti.com/lit/gpn/ina226 ... >> >> +config INA2XX_IIO >> + tristate "Texas Instruments INA2xx Power Monitors IIO driver" >> + depends on I2C > > Since you are using regmap you should select it here. Right. > >> + help >> + Say yes here to build support for TI INA2xx familly Power Monitors. >> + >> + Note that this is not the existing hwmon interface for this device. >> + >> + > > Config symbol should be in alphabetical order. Ok > ... >> obj-$(CONFIG_AD7266) += ad7266.o >> +obj-$(CONFIG_INA2XX_IIO) += ina2xx-iio.o > > The same here. Ok. > >> obj-$(CONFIG_AD7291) += ad7291.o >> obj-$(CONFIG_AD7298) += ad7298.o >> obj-$(CONFIG_AD7923) += ad7923.o >> diff --git a/drivers/iio/adc/ina2xx-iio.c b/drivers/iio/adc/ina2xx-iio.c >> new file mode 100644 >> index 0000000..257d8d5 >> --- /dev/null >> +++ b/drivers/iio/adc/ina2xx-iio.c >> @@ -0,0 +1,404 @@ >> +/* >> + * INA2XX Current and Power Monitors >> + * ... >> + * >> + * Licensed under the GPL-2 or later. > > If you know the I2C address its recommended to mention it here. ok. ... >> + >> +static struct regmap_config ina2xx_regmap_config = { >> + .reg_bits = 8, >> + .val_bits = 16, > Specify here which registers are cacheable, read/write. ok. ... >> + >> + return iio_device_register(indio_dev); > > If there is no reverse operation for ina2xx_init (e.g ina2xx_poweroff) then here > you can use devm_iio_device_register and completely remove > ina2xx_remove function. right, thanks! -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/