Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753974AbbKLRyD (ORCPT ); Thu, 12 Nov 2015 12:54:03 -0500 Received: from bear.ext.ti.com ([192.94.94.41]:41490 "EHLO bear.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753842AbbKLRxe (ORCPT ); Thu, 12 Nov 2015 12:53:34 -0500 From: Felipe Balbi To: Tony Lindgren , Rob Herring , MyungJoo Ham , Chanwoo Choi CC: Linux OMAP Mailing List , Linux ARM Kernel Mailing List , Linux Kernel Mailing List , Felipe Balbi Subject: [PATCH 1/2] arm: boot: dts: beaglex15: Remove ID GPIO Date: Thu, 12 Nov 2015 11:53:00 -0600 Message-ID: <1447350781-20649-2-git-send-email-balbi@ti.com> X-Mailer: git-send-email 2.6.2 In-Reply-To: <1447350781-20649-1-git-send-email-balbi@ti.com> References: <1447350781-20649-1-git-send-email-balbi@ti.com> MIME-Version: 1.0 Content-Type: text/plain Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 1039 Lines: 34 According to latest schematics [1], this board leaves ID pin floating. It's not connected to anything at all. So let's remove it. [1] https://github.com/beagleboard/beagleboard-x15/blob/master/BeagleBoard-X15_RevA2.pdf Signed-off-by: Felipe Balbi --- arch/arm/boot/dts/am57xx-beagle-x15.dts | 2 -- 1 file changed, 2 deletions(-) diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15.dts index 00352e761b8c..6f3a1a7ec5f9 100644 --- a/arch/arm/boot/dts/am57xx-beagle-x15.dts +++ b/arch/arm/boot/dts/am57xx-beagle-x15.dts @@ -560,8 +560,6 @@ extcon_usb2: tps659038_usb { compatible = "ti,palmas-usb-vid"; ti,enable-vbus-detection; - ti,enable-id-detection; - id-gpios = <&gpio7 24 GPIO_ACTIVE_HIGH>; }; }; -- 2.6.2 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/