MIME-version: 1.0
Content-type: text/plain; charset=utf-8
Content-transfer-encoding: 8BIT
Message-id: <564D9F54.60405@samsung.com>
Date: Thu, 19 Nov 2015 19:07:16 +0900
From: Ingi Kim <ingi2.kim@samsung.com>
User-Agent: Mozilla/5.0 (X11; Linux i686 on x86_64; rv:31.0) Gecko/20100101
 Thunderbird/31.6.0
To: Jacek Anaszewski <j.anaszewski@samsung.com>
Cc: robh+dt@kernel.org, pawel.moll@arm.com, mark.rutland@arm.com,
        ijc+devicetree@hellion.org.uk, galak@codeaurora.org,
        sameo@linux.intel.com, lee.jones@linaro.org, rpurdie@rpsys.net,
        inki.dae@samsung.com, sw0312.kim@samsung.com, beomho.seo@samsung.com,
        devicetree@vger.kernel.org, andi.shyti@samsung.com,
        "linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
        Linux LED Subsystem <linux-leds@vger.kernel.org>
Subject: Re: [PATCH v5 2/2] leds: rt5033: Add RT5033 Flash led device driver
References: <1447751060-27856-1-git-send-email-ingi2.kim@samsung.com>
 <1447751060-27856-3-git-send-email-ingi2.kim@samsung.com>
 <564C9D3E.2090308@samsung.com>
In-reply-to: <564C9D3E.2090308@samsung.com>
DLP-Filter: Pass
Sender: linux-kernel-owner@vger.kernel.org
Content-Length: 25650
Lines: 731

Hi Jacek,

Thanks for the review.

I'm trying to reply in detail what you mentioned.
Please contact me If you need more detail to understand what I replied.

On 2015년 11월 19일 00:46, Jacek Anaszewski wrote:
> Hi Ingi,
> 
> Thanks for the update. I have few comments below.
> 
> On 11/17/2015 10:04 AM, Ingi Kim wrote:
>> This patch adds device driver of Richtek RT5033 PMIC.
>> The RT5033 Flash LED Circuit is designed for one or two LEDs driving
>> for torch and strobe applications, it provides an I2C software command
>> to trigger the torch and strobe operation.
>>
>> Signed-off-by: Ingi Kim <ingi2.kim@samsung.com>
>> ---
>>   drivers/leds/Kconfig               |   8 +
>>   drivers/leds/Makefile              |   1 +
>>   drivers/leds/leds-rt5033.c         | 522 +++++++++++++++++++++++++++++++++++++
>>   include/linux/mfd/rt5033-private.h |  51 ++++
>>   4 files changed, 582 insertions(+)
>>   create mode 100644 drivers/leds/leds-rt5033.c
>>
>> diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
>> index b1ab8bd..f41ac9b 100644
>> --- a/drivers/leds/Kconfig
>> +++ b/drivers/leds/Kconfig
>> @@ -345,6 +345,14 @@ config LEDS_PCA963X
>>         LED driver chip accessed via the I2C bus. Supported
>>         devices include PCA9633 and PCA9634
>>
>> +config LEDS_RT5033
>> +    tristate "LED support for RT5033 PMIC"
>> +    depends on LEDS_CLASS_FLASH && OF
>> +    depends on MFD_RT5033
>> +    help
>> +      This option enables support for on-chip LED driver on
>> +      RT5033 PMIC.
>> +
>>   config LEDS_WM831X_STATUS
>>       tristate "LED support for status LEDs on WM831x PMICs"
>>       depends on LEDS_CLASS
>> diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
>> index e9d53092..77cfad5 100644
>> --- a/drivers/leds/Makefile
>> +++ b/drivers/leds/Makefile
>> @@ -23,6 +23,7 @@ obj-$(CONFIG_LEDS_COBALT_QUBE)        += leds-cobalt-qube.o
>>   obj-$(CONFIG_LEDS_COBALT_RAQ)        += leds-cobalt-raq.o
>>   obj-$(CONFIG_LEDS_SUNFIRE)        += leds-sunfire.o
>>   obj-$(CONFIG_LEDS_PCA9532)        += leds-pca9532.o
>> +obj-$(CONFIG_LEDS_RT5033)        += leds-rt5033.o
>>   obj-$(CONFIG_LEDS_GPIO_REGISTER)    += leds-gpio-register.o
>>   obj-$(CONFIG_LEDS_GPIO)            += leds-gpio.o
>>   obj-$(CONFIG_LEDS_LP3944)        += leds-lp3944.o
>> diff --git a/drivers/leds/leds-rt5033.c b/drivers/leds/leds-rt5033.c
>> new file mode 100644
>> index 0000000..a28554a
>> --- /dev/null
>> +++ b/drivers/leds/leds-rt5033.c
>> @@ -0,0 +1,522 @@
>> +/*
>> + * led driver for RT5033
>> + *
>> + * Copyright (C) 2015 Samsung Electronics, Co., Ltd.
>> + * Ingi Kim <ingi2.kim@samsung.com>
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 as
>> + * published by the Free Software Foundation.
>> + *
>> + */
>> +
>> +#include <linux/led-class-flash.h>
>> +#include <linux/mfd/rt5033.h>
>> +#include <linux/mfd/rt5033-private.h>
>> +#include <linux/module.h>
>> +#include <linux/mutex.h>
>> +#include <linux/platform_device.h>
>> +
>> +#define RT5033_LED_FLASH_TIMEOUT_MIN        64000
>> +#define RT5033_LED_FLASH_TIMEOUT_STEP        32000
>> +#define RT5033_LED_FLASH_BRIGHTNESS_MIN        50000
>> +#define RT5033_LED_FLASH_BRIGHTNESS_MAX_1CH    600000
>> +#define RT5033_LED_FLASH_BRIGHTNESS_MAX_2CH    800000
>> +#define RT5033_LED_FLASH_BRIGHTNESS_STEP    25000
>> +#define RT5033_LED_TORCH_BRIGHTNESS_MIN        12500
>> +#define RT5033_LED_TORCH_BRIGHTNESS_STEP    12500
>> +
>> +/* Macro to get offset of rt5033_led_config_data */
>> +#define RT5033_LED_CONFIG_DATA_OFFSET(val, step, min)    (((val) - (min)) \
>> +                            / (step))
>> +#define FLED1_IOUT        (BIT(0))
>> +#define FLED2_IOUT        (BIT(1))
>> +
>> +enum rt5033_fled {
>> +    FLED1,
>> +    FLED2,
>> +};
>> +
>> +struct rt5033_sub_led {
>> +    enum rt5033_fled fled_id;
>> +    struct led_classdev_flash fled_cdev;
>> +
>> +    u32 torch_brightness;
>> +    u32 flash_brightness;
>> +    u32 flash_timeout;
>> +};
>> +
>> +/* RT5033 Flash led platform data */
>> +struct rt5033_led {
>> +    struct device *dev;
>> +    struct mutex lock;
>> +    struct regmap *regmap;
>> +    struct rt5033_sub_led sub_leds[2];
>> +
>> +    bool iout_joint;
>> +    u8 fled_mask;
>> +    u8 current_iout;
>> +};
>> +
>> +struct rt5033_led_config_data {
>> +    const char *label[2];
>> +    u32 flash_max_microamp[2];
>> +    u32 flash_max_timeout[2];
>> +    u32 torch_max_microamp[2];
>> +    u32 num_leds;
>> +};
>> +
>> +static struct rt5033_sub_led *flcdev_to_sub_led(
>> +                    struct led_classdev_flash *fled_cdev)
>> +{
>> +    return container_of(fled_cdev, struct rt5033_sub_led, fled_cdev);
>> +}
>> +
>> +static struct rt5033_led *sub_led_to_led(struct rt5033_sub_led *sub_led)
>> +{
>> +    return container_of(sub_led, struct rt5033_led,
>> +                sub_leds[sub_led->fled_id]);
>> +}
>> +
>> +static bool rt5033_fled_used(struct rt5033_led *led, enum rt5033_fled fled_id)
>> +{
>> +    u8 fled_bit = (fled_id == FLED1) ? FLED1_IOUT : FLED2_IOUT;
>> +
>> +    return led->fled_mask & fled_bit;
>> +}
>> +
>> +static u8 rt5033_fled_iout_get(struct rt5033_led *led, enum rt5033_fled fled_id)
>> +{
>> +    u8 fled_bit;
>> +
>> +    if (led->iout_joint)
>> +        fled_bit = led->fled_mask;
>> +    else
>> +        fled_bit = (fled_id == FLED1) ? FLED1_IOUT : FLED2_IOUT;
>> +
>> +    return fled_bit;
>> +}
> 
> What is the purpose of this function? It seems to return
> a value that is always equal to led->fled_mask, regardless of the
> fled_id passed. Just use led->fled_mask directly.
> 

Uhm... I misunderstood it should be brighten separately.
But it supports just one channel to strobe or torch at once.

Right, It would be removed.
I will replace it.

>> +static int rt5033_led_iout_set_off(struct rt5033_led *led,
>> +                   enum rt5033_fled fled_id)
>> +{
>> +    int ret;
>> +    u8 fled_bit, value;
>> +
>> +    fled_bit = rt5033_fled_iout_get(led, fled_id);
>> +    led->current_iout ^= fled_bit;
>> +    led->sub_leds[fled_id].fled_cdev.led_cdev.brightness = 0;
>> +
>> +    ret = regmap_update_bits(led->regmap, RT5033_REG_FLED_FUNCTION1,
>> +                 RT5033_FLED_FUNC1_MASK,
>> +                 RT5033_FLED_PINCTRL | led->current_iout);
>> +    if (ret < 0)
>> +        return ret;
>> +
>> +    if (led->current_iout) {
>> +        value = led->sub_leds[!fled_id].fled_cdev.led_cdev.brightness;
>> +        ret = regmap_update_bits(led->regmap, RT5033_REG_FLED_CTRL1,
>> +                     RT5033_FLED_CTRL1_MASK,
>> +                     (value - 1) << 4);
>> +    }
> 
> I infer that the purpose of this function is to turn the LED off.
> Could you explain why two commands are needed for this?
> 

The purpose of this function is to turn the LED off as you mentioned.
It should be removed.

>> +    return ret;
>> +}
>> +
>> +static int rt5033_led_brightness_set(struct led_classdev *led_cdev,
>> +                     enum led_brightness brightness)
>> +{
>> +    struct led_classdev_flash *fled_cdev = lcdev_to_flcdev(led_cdev);
>> +    struct rt5033_sub_led *sub_led = flcdev_to_sub_led(fled_cdev);
>> +    struct rt5033_led *led = sub_led_to_led(sub_led);
>> +    int fled_id = sub_led->fled_id, ret;
>> +    u8 fled_bit;
>> +
>> +    mutex_lock(&led->lock);
>> +
>> +    if (!brightness) {
>> +        ret = rt5033_led_iout_set_off(led, fled_id);
>> +        goto torch_unlock;
>> +    }
>> +
>> +    fled_bit = rt5033_fled_iout_get(led, fled_id);
>> +    led->current_iout |= fled_bit;
> 
> You don't need fled_bit, just assign the result to led->current_iout.
> 

Okay, I'll do

>> +
>> +    ret = regmap_update_bits(led->regmap, RT5033_REG_FLED_CTRL1,
>> +                 RT5033_FLED_CTRL1_MASK, (brightness - 1) << 4);
>> +    if (ret < 0)
>> +        goto torch_unlock;
>> +    ret = regmap_update_bits(led->regmap, RT5033_REG_FLED_FUNCTION1,
>> +                 RT5033_FLED_FUNC1_MASK, RT5033_FLED_PINCTRL |
>> +                 led->current_iout);
>> +    if (ret < 0)
>> +        goto torch_unlock;
>> +    ret = regmap_update_bits(led->regmap, RT5033_REG_FLED_FUNCTION2,
>> +                 RT5033_FLED_FUNC2_MASK, RT5033_FLED_ENFLED);
> 
> Could you shortly describe the function of above three registers?
> 

RT5033_REG_FLED_CTRL1 : Control torch brightness. It can be set 12.5mA to 200mA.
RT5033_REG_FLED_FUNCTION1 : Set the operation mode (Torch / Strobe) and
			    determine which one gets control of LED between the two. (Pin or Register Bit)
RT5033_REG_FLED_FUNCTION2 : Set on/off flash strobe(one shot) and enable iout (<0>, <1>).

>> +torch_unlock:
>> +    mutex_unlock(&led->lock);
>> +    return ret;
>> +}
>> +
>> +static int rt5033_led_flash_brightness_set(struct led_classdev_flash *fled_cdev,
>> +                       u32 brightness)
>> +{
>> +    struct rt5033_sub_led *sub_led = flcdev_to_sub_led(fled_cdev);
>> +    struct rt5033_led *led = sub_led_to_led(sub_led);
>> +    u32 flash_brightness_offset;
>> +
>> +    mutex_lock(&led->lock);
>> +
>> +    flash_brightness_offset =
>> +        RT5033_LED_CONFIG_DATA_OFFSET(sub_led->fled_cdev.brightness.val,
>> +                         sub_led->fled_cdev.brightness.step,
>> +                         sub_led->fled_cdev.brightness.min);
> 
> Please align two above lines to the opening parenthesis.
> 

It will be over 80 characters when it aligns to the opening parenthesis.
So, I would fix these set as below if it is more better than before.
	flash_brightness_offset = RT5033_LED_CONFIG_DATA_OFFSET(
					sub_led->fled_cdev.brightness.val,
					sub_led->fled_cdev.brightness.step,
					sub_led->fled_cdev.brightness.min);

>> +    sub_led->flash_brightness = flash_brightness_offset;
> 
> flash_brightness_offset variable is redundant.
> 

The purpose of flash_brightness is that it saves offset of flash brightness to use easily.
To improve readability, It would be better to change name of variable
or to re-use RT5033_LED_CONFIG_DATA_OFFSET when it is needed.

>> +
>> +    mutex_unlock(&led->lock);
>> +
>> +    return 0;
>> +}
>> +
>> +static int rt5033_led_flash_timeout_set(struct led_classdev_flash *fled_cdev,
>> +                    u32 timeout)
>> +{
>> +    struct rt5033_sub_led *sub_led = flcdev_to_sub_led(fled_cdev);
>> +    struct rt5033_led *led = sub_led_to_led(sub_led);
>> +    u32 flash_tm_offset;
>> +
>> +    mutex_lock(&led->lock);
>> +
>> +    flash_tm_offset =
>> +        RT5033_LED_CONFIG_DATA_OFFSET(sub_led->fled_cdev.timeout.val,
>> +                          sub_led->fled_cdev.timeout.step,
>> +                          sub_led->fled_cdev.timeout.min);
>> +    sub_led->flash_timeout = flash_tm_offset;
> 
> flash_tm_offset variable is redundant.
> 

ditto

>> +    mutex_unlock(&led->lock);
>> +
>> +    return 0;
>> +}
>> +
>> +static int rt5033_led_flash_strobe_set(struct led_classdev_flash *fled_cdev,
>> +                       bool state)
>> +{
>> +    struct rt5033_sub_led *sub_led = flcdev_to_sub_led(fled_cdev);
>> +    struct rt5033_led *led = sub_led_to_led(sub_led);
>> +    enum rt5033_fled fled_id = sub_led->fled_id;
>> +    int ret;
>> +    u8 fled_bit;
>> +
>> +    mutex_lock(&led->lock);
>> +
>> +    fled_bit = rt5033_fled_iout_get(led, fled_id);
>> +    led->current_iout |= fled_bit;
>> +
>> +    ret = regmap_update_bits(led->regmap, RT5033_REG_FLED_FUNCTION2,
>> +                 RT5033_FLED_FUNC2_MASK, 0);
>> +    if (ret < 0)
>> +        goto strobe_unlock;
>> +
>> +    if (!state) {
>> +        ret = rt5033_led_iout_set_off(led, fled_id);
>> +        goto strobe_unlock;
>> +    }
>> +
>> +    ret = regmap_update_bits(led->regmap, RT5033_REG_FLED_STROBE_CTRL1,
>> +                 RT5033_FLED_STRBCTRL1_MASK,
>> +                 sub_led->flash_brightness);
> 
> Does the device allow for setting flash brightness separately for
> each iout? Currently it looks like the setting is shared.
> 

No, It doesn't. 
This device can't allow for setting flash brightness simultaneously.
The setting is shared as you see.

So each LED should keep their settings.

>> +    if (ret < 0)
>> +        goto strobe_unlock;
>> +    ret = regmap_update_bits(led->regmap, RT5033_REG_FLED_STROBE_CTRL2,
>> +                 RT5033_FLED_STRBCTRL2_MASK,
>> +                 sub_led->flash_timeout);
>> +    if (ret < 0)
>> +        goto strobe_unlock;
>> +    ret = regmap_update_bits(led->regmap, RT5033_REG_FLED_FUNCTION1,
>> +                 RT5033_FLED_FUNC1_MASK, RT5033_FLED_PINCTRL |
>> +                 RT5033_FLED_STRB_SEL | led->current_iout);
>> +    if (ret < 0)
>> +        goto strobe_unlock;
>> +    ret = regmap_update_bits(led->regmap, RT5033_REG_FLED_FUNCTION2,
>> +                 RT5033_FLED_FUNC2_MASK, RT5033_FLED_ENFLED |
>> +                 RT5033_FLED_SREG_STRB);
>> +
>> +    led->current_iout = 0;
>> +
>> +strobe_unlock:
>> +    mutex_unlock(&led->lock);
>> +    return ret;
>> +}
>> +
>> +static const struct led_flash_ops flash_ops = {
>> +    .flash_brightness_set = rt5033_led_flash_brightness_set,
>> +    .strobe_set = rt5033_led_flash_strobe_set,
>> +    .timeout_set = rt5033_led_flash_timeout_set,
>> +};
>> +
>> +static void rt5033_init_flash_properties(struct rt5033_sub_led *sub_led,
>> +                     struct rt5033_led_config_data *led_cfg)
>> +{
>> +    struct led_classdev_flash *fled_cdev = &sub_led->fled_cdev;
>> +    struct rt5033_led *led = sub_led_to_led(sub_led);
>> +    struct led_flash_setting *tm_set, *fl_set;
>> +    enum rt5033_fled fled_id = sub_led->fled_id;
>> +
>> +    tm_set = &fled_cdev->timeout;
>> +    tm_set->min = RT5033_LED_FLASH_TIMEOUT_MIN;
>> +    tm_set->max = led_cfg->flash_max_timeout[fled_id];
>> +    tm_set->step = RT5033_LED_FLASH_TIMEOUT_STEP;
>> +    tm_set->val = tm_set->max;
>> +
>> +    fl_set = &fled_cdev->brightness;
>> +    fl_set->min = RT5033_LED_FLASH_BRIGHTNESS_MIN;
>> +    if (led->iout_joint)
>> +        fl_set->max = min(led_cfg->flash_max_microamp[FLED1] +
>> +                  led_cfg->flash_max_microamp[FLED2],
>> +                  (u32)RT5033_LED_FLASH_BRIGHTNESS_MAX_2CH);
>> +    else
>> +        fl_set->max = min(led_cfg->flash_max_microamp[fled_id],
>> +                  (u32)RT5033_LED_FLASH_BRIGHTNESS_MAX_1CH);
>> +    fl_set->step = RT5033_LED_FLASH_BRIGHTNESS_STEP;
>> +    fl_set->val = fl_set->max;
>> +}
>> +
>> +static void rt5033_led_init_fled_cdev(struct rt5033_sub_led *sub_led,
>> +                      struct rt5033_led_config_data *led_cfg)
>> +{
>> +    struct led_classdev_flash *fled_cdev;
>> +    struct led_classdev *led_cdev;
>> +    enum rt5033_fled fled_id = sub_led->fled_id;
>> +    u32 flash_tm_offset, flash_brightness_offset;
>> +
>> +    /* Initialize LED Flash class device */
>> +    fled_cdev = &sub_led->fled_cdev;
>> +    fled_cdev->ops = &flash_ops;
>> +    led_cdev = &fled_cdev->led_cdev;
>> +
>> +    led_cdev->name = led_cfg->label[fled_id];
>> +
>> +    led_cdev->brightness_set_blocking = rt5033_led_brightness_set;
>> +    led_cdev->max_brightness = RT5033_LED_CONFIG_DATA_OFFSET(
>> +                   led_cfg->torch_max_microamp[fled_id],
>> +                   RT5033_LED_TORCH_BRIGHTNESS_STEP,
>> +                   RT5033_LED_TORCH_BRIGHTNESS_MIN);
>> +    led_cdev->flags |= LED_DEV_CAP_FLASH;
>> +
>> +    rt5033_init_flash_properties(sub_led, led_cfg);
>> +
>> +    flash_tm_offset = RT5033_LED_CONFIG_DATA_OFFSET(fled_cdev->timeout.val,
>> +                            fled_cdev->timeout.step,
>> +                            fled_cdev->timeout.min);
>> +    flash_brightness_offset =
>> +        RT5033_LED_CONFIG_DATA_OFFSET(fled_cdev->brightness.val,
>> +                          fled_cdev->brightness.step,
>> +                          fled_cdev->brightness.min);
>> +
>> +    sub_led->flash_timeout = flash_tm_offset;
>> +    sub_led->flash_brightness = flash_brightness_offset;
> 
> Same here - there is no need for flash_tm_offset and
> flash_brightness_offset variables.
> 

Ditto.


>> +}
>> +
>> +static int rt5033_led_parse_dt(struct rt5033_led *led, struct device *dev,
>> +                   struct rt5033_led_config_data *cfg,
>> +                   struct device_node **sub_nodes)
>> +{
>> +    struct device_node *np = dev->of_node;
>> +    struct device_node *child_node;
>> +    struct rt5033_sub_led *sub_leds = led->sub_leds;
>> +    struct property *prop;
>> +    u32 led_sources[2];
>> +    enum rt5033_fled fled_id;
>> +    int i, ret;
>> +
>> +    for_each_available_child_of_node(np, child_node) {
>> +        prop = of_find_property(child_node, "led-sources", NULL);
>> +        if (prop) {
>> +            const __be32 *srcs = NULL;
>> +
>> +            for (i = 0; i < ARRAY_SIZE(led_sources); ++i) {
>> +                srcs = of_prop_next_u32(prop, srcs,
>> +                            &led_sources[i]);
>> +                if (!srcs)
>> +                    break;
>> +            }
>> +        } else {
>> +            dev_err(dev, "led-sources DT property missing\n");
>> +            ret = -EINVAL;
>> +            goto err_parse_dt;
>> +        }
>> +
>> +        if (i == 2) {
>> +            fled_id = FLED1;
>> +            led->fled_mask = FLED1_IOUT | FLED2_IOUT;
>> +        } else if (led_sources[0] == FLED1) {
>> +            fled_id = FLED1;
>> +            led->fled_mask |= FLED1_IOUT;
>> +        } else if (led_sources[0] == FLED2) {
>> +            fled_id = FLED2;
>> +            led->fled_mask |= FLED2_IOUT;
>> +        } else {
>> +            dev_err(dev, "Wrong led-sources DT property value.\n");
>> +            ret = -EINVAL;
>> +            goto err_parse_dt;
>> +        }
>> +
>> +        if (sub_nodes[fled_id]) {
>> +            dev_err(dev,
>> +                "Conflicting \"led-sources\" DT properties\n");
>> +            ret = -EINVAL;
>> +            goto err_parse_dt;
>> +        }
>> +
>> +        sub_nodes[fled_id] = child_node;
>> +        sub_leds[fled_id].fled_id = fled_id;
>> +
>> +        cfg->label[fled_id] =
>> +            of_get_property(child_node, "label", NULL) ? :
>> +                    child_node->name;
>> +
>> +        ret = of_property_read_u32(child_node, "led-max-microamp",
>> +                       &cfg->torch_max_microamp[fled_id]);
>> +        if (ret < 0) {
>> +            dev_err(dev, "failed to parse led-max-microamp\n");
>> +            goto err_parse_dt;
>> +        }
>> +
>> +        ret = of_property_read_u32(child_node, "flash-max-microamp",
>> +                       &cfg->flash_max_microamp[fled_id]);
>> +        if (ret < 0) {
>> +            dev_err(dev, "failed to parse flash-max-microamp\n");
>> +            goto err_parse_dt;
>> +        }
>> +
>> +        ret = of_property_read_u32(child_node, "flash-max-timeout-us",
>> +                       &cfg->flash_max_timeout[fled_id]);
>> +        if (ret < 0) {
>> +            dev_err(dev, "failed to parse flash-max-timeout-us\n");
>> +            goto err_parse_dt;
>> +        }
>> +
>> +        if (++cfg->num_leds == 2 ||
>> +            (rt5033_fled_used(led, FLED1) &&
>> +             rt5033_fled_used(led, FLED2))) {
>> +            of_node_put(child_node);
>> +            break;
>> +        }
>> +    }
>> +
>> +    if (cfg->num_leds == 0) {
>> +        dev_err(dev, "No DT child node found for connected LED(s).\n");
>> +        return -EINVAL;
>> +    }
>> +
>> +    return 0;
>> +
>> +err_parse_dt:
>> +    of_node_put(child_node);
>> +    return ret;
>> +}
>> +
>> +static int rt5033_led_probe(struct platform_device *pdev)
>> +{
>> +    struct rt5033_dev *rt5033 = dev_get_drvdata(pdev->dev.parent);
>> +    struct rt5033_led *led;
>> +    struct rt5033_sub_led *sub_leds;
>> +    struct device_node *sub_nodes[2] = {};
>> +    struct rt5033_led_config_data led_cfg = {};
>> +    int init_fled_cdev[2], i, ret;
>> +
>> +    led = devm_kzalloc(&pdev->dev, sizeof(*led), GFP_KERNEL);
>> +    if (!led)
>> +        return -ENOMEM;
>> +
>> +    platform_set_drvdata(pdev, led);
>> +    led->dev = &pdev->dev;
>> +    led->regmap = rt5033->regmap;
>> +    sub_leds = led->sub_leds;
>> +
>> +    ret = rt5033_led_parse_dt(led, &pdev->dev, &led_cfg, sub_nodes);
>> +    if (ret < 0)
>> +        return ret;
>> +
>> +    if (led_cfg.num_leds == 1 && rt5033_fled_used(led, FLED1) &&
>> +        rt5033_fled_used(led, FLED2))
>> +        led->iout_joint = true;
>> +
>> +    mutex_init(&led->lock);
>> +
>> +    init_fled_cdev[FLED1] =
>> +            led->iout_joint || rt5033_fled_used(led, FLED1);
>> +    init_fled_cdev[FLED2] =
>> +            !led->iout_joint && rt5033_fled_used(led, FLED2);
>> +
>> +    for (i = FLED1; i <= FLED2; ++i) {
>> +        if (!init_fled_cdev[i])
>> +            continue;
>> +
>> +        rt5033_led_init_fled_cdev(&sub_leds[i], &led_cfg);
>> +        ret = led_classdev_flash_register(led->dev,
>> +                          &sub_leds[i].fled_cdev);
>> +        if (ret < 0) {
>> +            if (i == FLED2)
>> +                goto err_register_led2;
>> +            else
>> +                goto err_register_led1;
>> +        }
>> +    }
>> +
>> +    led->current_iout = 0;
>> +    ret = regmap_update_bits(led->regmap, RT5033_REG_FLED_FUNCTION1,
>> +                 RT5033_FLED_FUNC1_MASK, RT5033_FLED_RESET);
>> +    if (ret < 0)
>> +        dev_dbg(led->dev, "Failed to reset flash led (%d)\n", ret);
>> +
>> +    return 0;
>> +
>> +err_register_led2:
>> +    /* It is possible than only FLED2 was to be registered */
>> +    if (!init_fled_cdev[FLED1])
>> +        goto err_register_led1;
>> +    led_classdev_flash_unregister(&sub_leds[FLED1].fled_cdev);
>> +err_register_led1:
>> +    mutex_destroy(&led->lock);
>> +
>> +    return ret;
>> +}
>> +
>> +static int rt5033_led_remove(struct platform_device *pdev)
>> +{
>> +    struct rt5033_led *led = platform_get_drvdata(pdev);
>> +    struct rt5033_sub_led *sub_leds = led->sub_leds;
>> +
>> +    if (led->iout_joint || rt5033_fled_used(led, FLED1))
>> +        led_classdev_flash_unregister(&sub_leds[FLED1].fled_cdev);
>> +
>> +    if (!led->iout_joint && rt5033_fled_used(led, FLED2))
>> +        led_classdev_flash_unregister(&sub_leds[FLED2].fled_cdev);
>> +
>> +    mutex_destroy(&led->lock);
>> +
>> +    return 0;
>> +}
>> +
>> +static const struct of_device_id rt5033_led_match[] = {
>> +    { .compatible = "richtek,rt5033-led", },
>> +    { /* sentinel */ },
>> +};
>> +MODULE_DEVICE_TABLE(of, rt5033_led_match);
>> +
>> +static struct platform_driver rt5033_led_driver = {
>> +    .driver = {
>> +        .name = "rt5033-led",
>> +        .of_match_table = rt5033_led_match,
>> +    },
>> +    .probe        = rt5033_led_probe,
>> +    .remove        = rt5033_led_remove,
>> +};
>> +module_platform_driver(rt5033_led_driver);
>> +
>> +MODULE_AUTHOR("Ingi Kim <ingi2.kim@samsung.com>");
>> +MODULE_DESCRIPTION("Richtek RT5033 LED driver");
>> +MODULE_LICENSE("GPL v2");
>> +MODULE_ALIAS("platform:rt5033-led");
>> diff --git a/include/linux/mfd/rt5033-private.h b/include/linux/mfd/rt5033-private.h
>> index 1b63fc2..b20c7e4 100644
>> --- a/include/linux/mfd/rt5033-private.h
>> +++ b/include/linux/mfd/rt5033-private.h
>> @@ -93,6 +93,57 @@ enum rt5033_reg {
>>   #define RT5033_RT_CTRL1_UUG_MASK    0x02
>>   #define RT5033_RT_HZ_MASK        0x01
>>
>> +/* RT5033 FLED Function1 register */
>> +#define RT5033_FLED_FUNC1_MASK        0x97
>> +#define RT5033_FLED_EN_LEDCS1        0x01
>> +#define RT5033_FLED_EN_LEDCS2        0x02
>> +#define RT5033_FLED_STRB_SEL        0x04
>> +#define RT5033_FLED_PINCTRL        0x10
>> +#define RT5033_FLED_RESET        0x80
>> +
>> +/* RT5033 FLED Function2 register */
>> +#define RT5033_FLED_FUNC2_MASK        0x81
>> +#define RT5033_FLED_ENFLED        0x01
>> +#define RT5033_FLED_SREG_STRB        0x80
>> +
>> +/* RT5033 FLED Strobe Control1 */
>> +#define RT5033_FLED_STRBCTRL1_MASK        0xFF
>> +#define RT5033_FLED_STRBCTRL1_TM_CUR_MAX    0xE0
>> +#define RT5033_FLED_STRBCTRL1_FL_CUR_DEF    0x0D
>> +#define RT5033_FLED_STRBCTRL1_FL_CUR_MAX    0x1F
>> +
>> +/* RT5033 FLED Strobe Control2 */
>> +#define RT5033_FLED_STRBCTRL2_MASK    0x3F
>> +#define RT5033_FLED_STRBCTRL2_TM_DEF    0x0F
>> +#define RT5033_FLED_STRBCTRL2_TM_MAX    0x3F
>> +
>> +/* RT5033 FLED Control1 */
>> +#define RT5033_FLED_CTRL1_MASK        0xF7
>> +#define RT5033_FLED_CTRL1_TORCH_CUR_DEF    0x20
>> +#define RT5033_FLED_CTRL1_TORCH_CUR_MAX    0xF0
>> +#define RT5033_FLED_CTRL1_LBP_DEF    0x02
>> +#define RT5033_FLED_CTRL1_LBP_MAX    0x07
>> +
>> +/* RT5033 FLED Control2 */
>> +#define RT5033_FLED_CTRL2_MASK        0xFF
>> +#define RT5033_FLED_CTRL2_VMID_DEF    0x37
>> +#define RT5033_FLED_CTRL2_VMID_MAX    0x3F
>> +#define RT5033_FLED_CTRL2_TRACK_ALIVE    0x40
>> +#define RT5033_FLED_CTRL2_MID_TRACK    0x80
>> +
>> +/* RT5033 FLED Control4 */
>> +#define RT5033_FLED_CTRL4_MASK        0xE0
>> +#define RT5033_FLED_CTRL4_RESV        0x14
>> +#define RT5033_FLED_CTRL4_VTRREG_DEF    0x40
>> +#define RT5033_FLED_CTRL4_VTRREG_MAX    0x60
>> +#define RT5033_FLED_CTRL4_TRACK_CLK    0x80
>> +
>> +/* RT5033 FLED Control5 */
>> +#define RT5033_FLED_CTRL5_MASK        0xC0
>> +#define RT5033_FLED_CTRL5_RESV        0x10
>> +#define RT5033_FLED_CTRL5_TA_GOOD    0x40
>> +#define RT5033_FLED_CTRL5_TA_EXIST    0x80
>> +
>>   /* RT5033 control register */
>>   #define RT5033_CTRL_FCCM_BUCK_MASK        0x00
>>   #define RT5033_CTRL_BUCKOMS_MASK        0x01
>>
> 
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/