Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1162356AbbKTI6G (ORCPT ); Fri, 20 Nov 2015 03:58:06 -0500 Received: from galahad.ideasonboard.com ([185.26.127.97]:33987 "EHLO galahad.ideasonboard.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1161067AbbKTI6E (ORCPT ); Fri, 20 Nov 2015 03:58:04 -0500 From: Laurent Pinchart To: Geert Uytterhoeven Cc: Geert Uytterhoeven , Greg Kroah-Hartman , Simon Horman , Magnus Damm , Yoshinori Sato , "linux-serial@vger.kernel.org" , Linux-sh list , "linux-kernel@vger.kernel.org" Subject: Re: [PATCH 00/25] serial: sh-sci: Add external clock and BRG Support Date: Fri, 20 Nov 2015 10:58:10 +0200 Message-ID: <11872773.MUvOKIUXMO@avalon> User-Agent: KMail/4.14.8 (Linux/4.0.9-gentoo; KDE/4.14.8; x86_64; ; ) In-Reply-To: References: <1447958344-836-1-git-send-email-geert+renesas@glider.be> <1662323.uZlFXR9U2a@avalon> MIME-Version: 1.0 Content-Transfer-Encoding: 7Bit Content-Type: text/plain; charset="us-ascii" Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 2035 Lines: 60 Hi Geert, On Friday 20 November 2015 09:22:16 Geert Uytterhoeven wrote: > On Thu, Nov 19, 2015 at 10:08 PM, Laurent Pinchart wrote: > > For patches 3-6, 13, 15-16 and 22 and 24, > > > > Reviewed-by: Laurent Pinchart > > Many thanks for your review comments! You're welcome. > > I'm not sure I'd bother with patch 25/25, but I'm not against merging it > > either. I'd be surprised if the serial driver still worked at all on SH > > :-) > > It should not cause problems, as long as sh7734 doesn't add the optional > clocks ;-) To be clear I don't expect this patch set to break it, I expect it to be broken already :-) > > On Thursday 19 November 2015 19:38:39 Geert Uytterhoeven wrote: > >> This patch series adds support to the Renesas SCI serial driver for > >> > >> - the optional external clock on (H)SCI(F) and some SCIFA, where this > >> > >> pin can serve as a clock input, > >> > >> - the optional clock sources for the Baud Rate Generator for External > >> > >> Clock (BRG), as found on some SCIF variants and on HSCIF. > > > > Could you briefly explain (and even better in a source code comment) how > > you handle baud rate calculation with the chained BRGs ? > > I'll do that. Note that there's no chaining of BRGs, only muxing (so yes, it > needs more clarification ;-). Really ? I thought the BRG-EC was one possible input for the internal BRG ? Does it bypass the internal BRG ? Or do you configure the internal BRG to not divide the clock when using the BRG-EC ? > There can be 4 possible sources for the sampling clock: > 1. Internal BRG (BRR register), > 2. (H)SCK, > 3. BRG for external clock > a. Using SCIF_CLK, > b. Using the bus clock. -- Regards, Laurent Pinchart -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/