Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1755279AbbKWP1s (ORCPT ); Mon, 23 Nov 2015 10:27:48 -0500 Received: from eusmtp01.atmel.com ([212.144.249.242]:55401 "EHLO eusmtp01.atmel.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1755222AbbKWP1W (ORCPT ); Mon, 23 Nov 2015 10:27:22 -0500 From: Ludovic Desroches To: CC: , , , Ludovic Desroches Subject: [PATCH 3/3] mmc: atmel-mci: atmci_convert_chksize depends on controller version Date: Mon, 23 Nov 2015 16:27:32 +0100 Message-ID: <1448292452-5786-3-git-send-email-ludovic.desroches@atmel.com> X-Mailer: git-send-email 2.5.0 In-Reply-To: <1448292452-5786-1-git-send-email-ludovic.desroches@atmel.com> References: <1448292452-5786-1-git-send-email-ludovic.desroches@atmel.com> MIME-Version: 1.0 Content-Type: text/plain Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 2759 Lines: 87 The atmci_convert_chksize() function is no more valid for controller version 0x600 due to the introduction of '2 data' chunk size. Signed-off-by: Ludovic Desroches --- drivers/mmc/host/atmel-mci.c | 43 +++++++++++++++++++++++++++---------------- 1 file changed, 27 insertions(+), 16 deletions(-) diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c index 9f3bb61..a36ebda 100644 --- a/drivers/mmc/host/atmel-mci.c +++ b/drivers/mmc/host/atmel-mci.c @@ -180,20 +180,6 @@ # define ATMCI_PDC_CONNECTED 1 #endif -/* - * Fix sconfig's burst size according to atmel MCI. We need to convert them as: - * 1 -> 0, 4 -> 1, 8 -> 2, 16 -> 3. - * - * This can be done by finding most significant bit set. - */ -static inline unsigned int atmci_convert_chksize(unsigned int maxburst) -{ - if (maxburst > 1) - return fls(maxburst) - 2; - else - return 0; -} - #define AUTOSUSPEND_DELAY 50 #define ATMCI_DATA_ERROR_FLAGS (ATMCI_DCRCE | ATMCI_DTOE | ATMCI_OVRE | ATMCI_UNRE) @@ -732,6 +718,29 @@ static inline unsigned int atmci_get_version(struct atmel_mci *host) return atmci_readl(host, ATMCI_VERSION) & 0x00000fff; } +/* + * Fix sconfig's burst size according to atmel MCI. We need to convert them as: + * 1 -> 0, 4 -> 1, 8 -> 2, 16 -> 3. + * With version 0x600, we need to convert them as: 1 -> 0, 2 -> 1, 4 -> 2, + * 8 -> 3, 16 -> 4. + * + * This can be done by finding most significant bit set. + */ +static inline unsigned int atmci_convert_chksize(struct atmel_mci *host, + unsigned int maxburst) +{ + unsigned int version = atmci_get_version(host); + unsigned int offset = 2; + + if (version >= 0x600) + offset = 1; + + if (maxburst > 1) + return fls(maxburst) - offset; + else + return 0; +} + static void atmci_timeout_timer(unsigned long data) { struct atmel_mci *host; @@ -1182,11 +1191,13 @@ atmci_prepare_data_dma(struct atmel_mci *host, struct mmc_data *data) if (data->flags & MMC_DATA_READ) { direction = DMA_FROM_DEVICE; host->dma_conf.direction = slave_dirn = DMA_DEV_TO_MEM; - maxburst = atmci_convert_chksize(host->dma_conf.src_maxburst); + maxburst = atmci_convert_chksize(host, + host->dma_conf.src_maxburst); } else { direction = DMA_TO_DEVICE; host->dma_conf.direction = slave_dirn = DMA_MEM_TO_DEV; - maxburst = atmci_convert_chksize(host->dma_conf.dst_maxburst); + maxburst = atmci_convert_chksize(host, + host->dma_conf.dst_maxburst); } if (host->caps.has_dma_conf_reg) -- 2.5.0 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/