Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1755264AbbKWRuX (ORCPT ); Mon, 23 Nov 2015 12:50:23 -0500 Received: from mail-gw3-out.broadcom.com ([216.31.210.64]:43785 "EHLO mail-gw3-out.broadcom.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1755220AbbKWRuS (ORCPT ); Mon, 23 Nov 2015 12:50:18 -0500 X-IronPort-AV: E=Sophos;i="5.20,338,1444719600"; d="scan'208";a="81165912" From: Ray Jui To: Michael Turquette , Stephen Boyd CC: , , , Simran Rai , Ray Jui Subject: [PATCH v2 2/4] clk: iproc: Add support for Cygnus audio clocks Date: Mon, 23 Nov 2015 09:50:25 -0800 Message-ID: <1448301027-27061-3-git-send-email-rjui@broadcom.com> X-Mailer: git-send-email 1.9.1 In-Reply-To: <1448301027-27061-1-git-send-email-rjui@broadcom.com> References: <1448301027-27061-1-git-send-email-rjui@broadcom.com> MIME-Version: 1.0 Content-Type: text/plain Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 8042 Lines: 238 From: Simran Rai This patch adds support for Broadcom Cygnus audio PLL and leaf clocks Signed-off-by: Simran Rai Reviewed-by: Scott Branden Signed-off-by: Ray Jui --- drivers/clk/bcm/clk-cygnus.c | 59 ++++++++++++++++++++++++++++++++++ drivers/clk/bcm/clk-iproc-pll.c | 41 ++++++++++++++++++++--- drivers/clk/bcm/clk-iproc.h | 21 ++++++++++++ include/dt-bindings/clock/bcm-cygnus.h | 6 ++++ 4 files changed, 122 insertions(+), 5 deletions(-) diff --git a/drivers/clk/bcm/clk-cygnus.c b/drivers/clk/bcm/clk-cygnus.c index 3a228b6..464fdc4 100644 --- a/drivers/clk/bcm/clk-cygnus.c +++ b/drivers/clk/bcm/clk-cygnus.c @@ -268,3 +268,62 @@ static void __init cygnus_asiu_init(struct device_node *node) iproc_asiu_setup(node, asiu_div, asiu_gate, ARRAY_SIZE(asiu_div)); } CLK_OF_DECLARE(cygnus_asiu_clk, "brcm,cygnus-asiu-clk", cygnus_asiu_init); + +/* + * AUDIO PLL VCO frequency parameter table + * + * PLL output frequency = ((ndiv_int + ndiv_frac / 2^20) * + * (parent clock rate / pdiv) + * + * On Cygnus, parent is the 25MHz oscillator + */ +static const struct iproc_pll_vco_param audiopll_vco_params[] = { + /* rate (Hz) ndiv_int ndiv_frac pdiv */ + { 1354750204UL, 54, 199238, 1 }, + { 1769470191UL, 70, 816639, 1 }, +}; + +static const struct iproc_pll_ctrl audiopll = { + .flags = IPROC_CLK_PLL_NEEDS_SW_CFG | IPROC_CLK_PLL_HAS_NDIV_FRAC | + IPROC_CLK_PLL_USER_MODE_ON | IPROC_CLK_PLL_RESET_ACTIVE_LOW, + .reset = RESET_VAL(0x5c, 0, 1), + .dig_filter = DF_VAL(0x48, 0, 3, 6, 4, 3, 3), + .sw_ctrl = SW_CTRL_VAL(0x4, 0), + .ndiv_int = REG_VAL(0x8, 0, 10), + .ndiv_frac = REG_VAL(0x8, 10, 20), + .pdiv = REG_VAL(0x44, 0, 4), + .vco_ctrl = VCO_CTRL_VAL(0x0c, 0x10), + .status = REG_VAL(0x54, 0, 1), + .macro_mode = REG_VAL(0x0, 0, 3), +}; + +static const struct iproc_clk_ctrl audiopll_clk[] = { + [BCM_CYGNUS_AUDIOPLL_CH0] = { + .channel = BCM_CYGNUS_AUDIOPLL_CH0, + .flags = IPROC_CLK_AON | + IPROC_CLK_MCLK_DIV_BY_2, + .enable = ENABLE_VAL(0x14, 8, 10, 9), + .mdiv = REG_VAL(0x14, 0, 8), + }, + [BCM_CYGNUS_AUDIOPLL_CH1] = { + .channel = BCM_CYGNUS_AUDIOPLL_CH1, + .flags = IPROC_CLK_AON, + .enable = ENABLE_VAL(0x18, 8, 10, 9), + .mdiv = REG_VAL(0x18, 0, 8), + }, + [BCM_CYGNUS_AUDIOPLL_CH2] = { + .channel = BCM_CYGNUS_AUDIOPLL_CH2, + .flags = IPROC_CLK_AON, + .enable = ENABLE_VAL(0x1c, 8, 10, 9), + .mdiv = REG_VAL(0x1c, 0, 8), + }, +}; + +static void __init cygnus_audiopll_clk_init(struct device_node *node) +{ + iproc_pll_clk_setup(node, &audiopll, audiopll_vco_params, + ARRAY_SIZE(audiopll_vco_params), audiopll_clk, + ARRAY_SIZE(audiopll_clk)); +} +CLK_OF_DECLARE(cygnus_audiopll, "brcm,cygnus-audiopll", + cygnus_audiopll_clk_init); diff --git a/drivers/clk/bcm/clk-iproc-pll.c b/drivers/clk/bcm/clk-iproc-pll.c index afd5891..fd492a5 100644 --- a/drivers/clk/bcm/clk-iproc-pll.c +++ b/drivers/clk/bcm/clk-iproc-pll.c @@ -25,6 +25,12 @@ #define PLL_VCO_HIGH_SHIFT 19 #define PLL_VCO_LOW_SHIFT 30 +/* + * PLL MACRO_SELECT modes 0 to 5 choose pre-calculated PLL output frequencies + * from a look-up table. Mode 7 allows user to manipulate PLL clock dividers + */ +#define PLL_USER_MODE 7 + /* number of delay loops waiting for PLL to lock */ #define LOCK_DELAY 100 @@ -215,7 +221,10 @@ static void __pll_put_in_reset(struct iproc_pll *pll) const struct iproc_pll_reset_ctrl *reset = &ctrl->reset; val = readl(pll->control_base + reset->offset); - val &= ~(1 << reset->reset_shift | 1 << reset->p_reset_shift); + if (ctrl->flags & IPROC_CLK_PLL_RESET_ACTIVE_LOW) + val |= BIT(reset->reset_shift) | BIT(reset->p_reset_shift); + else + val &= ~(BIT(reset->reset_shift) | BIT(reset->p_reset_shift)); iproc_pll_write(pll, pll->control_base, reset->offset, val); } @@ -236,7 +245,10 @@ static void __pll_bring_out_reset(struct iproc_pll *pll, unsigned int kp, iproc_pll_write(pll, pll->control_base, dig_filter->offset, val); val = readl(pll->control_base + reset->offset); - val |= 1 << reset->reset_shift | 1 << reset->p_reset_shift; + if (ctrl->flags & IPROC_CLK_PLL_RESET_ACTIVE_LOW) + val &= ~(BIT(reset->reset_shift) | BIT(reset->p_reset_shift)); + else + val |= BIT(reset->reset_shift) | BIT(reset->p_reset_shift); iproc_pll_write(pll, pll->control_base, reset->offset, val); } @@ -292,6 +304,16 @@ static int pll_set_rate(struct iproc_clk *clk, unsigned int rate_index, /* put PLL in reset */ __pll_put_in_reset(pll); + /* set PLL in user mode before modifying PLL controls */ + if (ctrl->flags & IPROC_CLK_PLL_USER_MODE_ON) { + val = readl(pll->control_base + ctrl->macro_mode.offset); + val &= ~(bit_mask(ctrl->macro_mode.width) << + ctrl->macro_mode.shift); + val |= PLL_USER_MODE << ctrl->macro_mode.shift; + iproc_pll_write(pll, pll->control_base, + ctrl->macro_mode.offset, val); + } + iproc_pll_write(pll, pll->control_base, ctrl->vco_ctrl.u_offset, 0); val = readl(pll->control_base + ctrl->vco_ctrl.l_offset); @@ -505,7 +527,10 @@ static unsigned long iproc_clk_recalc_rate(struct clk_hw *hw, if (mdiv == 0) mdiv = 256; - clk->rate = parent_rate / mdiv; + if (ctrl->flags & IPROC_CLK_MCLK_DIV_BY_2) + clk->rate = parent_rate / (mdiv * 2); + else + clk->rate = parent_rate / mdiv; return clk->rate; } @@ -543,7 +568,10 @@ static int iproc_clk_set_rate(struct clk_hw *hw, unsigned long rate, if (rate == 0 || parent_rate == 0) return -EINVAL; - div = DIV_ROUND_UP(parent_rate, rate); + if (ctrl->flags & IPROC_CLK_MCLK_DIV_BY_2) + div = DIV_ROUND_UP(parent_rate, rate * 2); + else + div = DIV_ROUND_UP(parent_rate, rate); if (div > 256) return -EINVAL; @@ -555,7 +583,10 @@ static int iproc_clk_set_rate(struct clk_hw *hw, unsigned long rate, val |= div << ctrl->mdiv.shift; } iproc_pll_write(pll, pll->control_base, ctrl->mdiv.offset, val); - clk->rate = parent_rate / div; + if (ctrl->flags & IPROC_CLK_MCLK_DIV_BY_2) + clk->rate = parent_rate / (div * 2); + else + clk->rate = parent_rate / div; return 0; } diff --git a/drivers/clk/bcm/clk-iproc.h b/drivers/clk/bcm/clk-iproc.h index 8988de7..febae11 100644 --- a/drivers/clk/bcm/clk-iproc.h +++ b/drivers/clk/bcm/clk-iproc.h @@ -61,6 +61,26 @@ #define IPROC_CLK_PLL_SPLIT_STAT_CTRL BIT(6) /* + * Some PLLs have an additional divide by 2 in master clock calculation; + * MCLK = VCO_freq / (Mdiv * 2). Identify this to let the driver know + * of modified calculations + */ +#define IPROC_CLK_MCLK_DIV_BY_2 BIT(7) + +/* + * Some PLLs provide a look up table for the leaf clock frequencies and + * auto calculates VCO frequency parameters based on the provided leaf + * clock frequencies. They have a user mode that allows the divider + * controls to be determined by the user + */ +#define IPROC_CLK_PLL_USER_MODE_ON BIT(8) + +/* + * Some PLLs have an active low reset + */ +#define IPROC_CLK_PLL_RESET_ACTIVE_LOW BIT(9) + +/* * Parameters for VCO frequency configuration * * VCO frequency = @@ -149,6 +169,7 @@ struct iproc_pll_ctrl { struct iproc_clk_reg_op pdiv; struct iproc_pll_vco_ctrl vco_ctrl; struct iproc_clk_reg_op status; + struct iproc_clk_reg_op macro_mode; }; /* diff --git a/include/dt-bindings/clock/bcm-cygnus.h b/include/dt-bindings/clock/bcm-cygnus.h index 32fbc47..62ac5d7 100644 --- a/include/dt-bindings/clock/bcm-cygnus.h +++ b/include/dt-bindings/clock/bcm-cygnus.h @@ -65,4 +65,10 @@ #define BCM_CYGNUS_ASIU_ADC_CLK 1 #define BCM_CYGNUS_ASIU_PWM_CLK 2 +/* AUDIO clock ID */ +#define BCM_CYGNUS_AUDIOPLL 0 +#define BCM_CYGNUS_AUDIOPLL_CH0 1 +#define BCM_CYGNUS_AUDIOPLL_CH1 2 +#define BCM_CYGNUS_AUDIOPLL_CH2 3 + #endif /* _CLOCK_BCM_CYGNUS_H */ -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/