Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754160AbbKYQd6 (ORCPT ); Wed, 25 Nov 2015 11:33:58 -0500 Received: from mail-yk0-f169.google.com ([209.85.160.169]:33470 "EHLO mail-yk0-f169.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753768AbbKYQdt (ORCPT ); Wed, 25 Nov 2015 11:33:49 -0500 MIME-Version: 1.0 In-Reply-To: <1448292452-5786-1-git-send-email-ludovic.desroches@atmel.com> References: <1448292452-5786-1-git-send-email-ludovic.desroches@atmel.com> Date: Wed, 25 Nov 2015 17:33:48 +0100 Message-ID: Subject: Re: [PATCH 1/3] mmc: atmel-mci: move atmel-mci-regs.h content in atmel-mci.c From: Ulf Hansson To: Ludovic Desroches Cc: linux-mmc , "linux-kernel@vger.kernel.org" , Nicolas Ferre Content-Type: text/plain; charset=UTF-8 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 24216 Lines: 365 On 23 November 2015 at 16:27, Ludovic Desroches wrote: > atmel-mci-regs.h is only included in atmel-mci.c so move its content in > the driver and do some cleanup in these definitions to remove checkpatch > errors. > > Signed-off-by: Ludovic Desroches Thanks, applied for next! Kind regards Uffe > --- > drivers/mmc/host/atmel-mci-regs.h | 171 -------------------------------------- > drivers/mmc/host/atmel-mci.c | 150 ++++++++++++++++++++++++++++++++- > 2 files changed, 149 insertions(+), 172 deletions(-) > delete mode 100644 drivers/mmc/host/atmel-mci-regs.h > > diff --git a/drivers/mmc/host/atmel-mci-regs.h b/drivers/mmc/host/atmel-mci-regs.h > deleted file mode 100644 > index 0aa44e6..0000000 > --- a/drivers/mmc/host/atmel-mci-regs.h > +++ /dev/null > @@ -1,171 +0,0 @@ > -/* > - * Atmel MultiMedia Card Interface driver > - * > - * Copyright (C) 2004-2006 Atmel Corporation > - * > - * This program is free software; you can redistribute it and/or modify > - * it under the terms of the GNU General Public License version 2 as > - * published by the Free Software Foundation. > - */ > - > -/* > - * Superset of MCI IP registers integrated in Atmel AVR32 and AT91 Processors > - * Registers and bitfields marked with [2] are only available in MCI2 > - */ > - > -#ifndef __DRIVERS_MMC_ATMEL_MCI_H__ > -#define __DRIVERS_MMC_ATMEL_MCI_H__ > - > -/* MCI Register Definitions */ > -#define ATMCI_CR 0x0000 /* Control */ > -# define ATMCI_CR_MCIEN ( 1 << 0) /* MCI Enable */ > -# define ATMCI_CR_MCIDIS ( 1 << 1) /* MCI Disable */ > -# define ATMCI_CR_PWSEN ( 1 << 2) /* Power Save Enable */ > -# define ATMCI_CR_PWSDIS ( 1 << 3) /* Power Save Disable */ > -# define ATMCI_CR_SWRST ( 1 << 7) /* Software Reset */ > -#define ATMCI_MR 0x0004 /* Mode */ > -# define ATMCI_MR_CLKDIV(x) ((x) << 0) /* Clock Divider */ > -# define ATMCI_MR_PWSDIV(x) ((x) << 8) /* Power Saving Divider */ > -# define ATMCI_MR_RDPROOF ( 1 << 11) /* Read Proof */ > -# define ATMCI_MR_WRPROOF ( 1 << 12) /* Write Proof */ > -# define ATMCI_MR_PDCFBYTE ( 1 << 13) /* Force Byte Transfer */ > -# define ATMCI_MR_PDCPADV ( 1 << 14) /* Padding Value */ > -# define ATMCI_MR_PDCMODE ( 1 << 15) /* PDC-oriented Mode */ > -# define ATMCI_MR_CLKODD(x) ((x) << 16) /* LSB of Clock Divider */ > -#define ATMCI_DTOR 0x0008 /* Data Timeout */ > -# define ATMCI_DTOCYC(x) ((x) << 0) /* Data Timeout Cycles */ > -# define ATMCI_DTOMUL(x) ((x) << 4) /* Data Timeout Multiplier */ > -#define ATMCI_SDCR 0x000c /* SD Card / SDIO */ > -# define ATMCI_SDCSEL_SLOT_A ( 0 << 0) /* Select SD slot A */ > -# define ATMCI_SDCSEL_SLOT_B ( 1 << 0) /* Select SD slot A */ > -# define ATMCI_SDCSEL_MASK ( 3 << 0) > -# define ATMCI_SDCBUS_1BIT ( 0 << 6) /* 1-bit data bus */ > -# define ATMCI_SDCBUS_4BIT ( 2 << 6) /* 4-bit data bus */ > -# define ATMCI_SDCBUS_8BIT ( 3 << 6) /* 8-bit data bus[2] */ > -# define ATMCI_SDCBUS_MASK ( 3 << 6) > -#define ATMCI_ARGR 0x0010 /* Command Argument */ > -#define ATMCI_CMDR 0x0014 /* Command */ > -# define ATMCI_CMDR_CMDNB(x) ((x) << 0) /* Command Opcode */ > -# define ATMCI_CMDR_RSPTYP_NONE ( 0 << 6) /* No response */ > -# define ATMCI_CMDR_RSPTYP_48BIT ( 1 << 6) /* 48-bit response */ > -# define ATMCI_CMDR_RSPTYP_136BIT ( 2 << 6) /* 136-bit response */ > -# define ATMCI_CMDR_SPCMD_INIT ( 1 << 8) /* Initialization command */ > -# define ATMCI_CMDR_SPCMD_SYNC ( 2 << 8) /* Synchronized command */ > -# define ATMCI_CMDR_SPCMD_INT ( 4 << 8) /* Interrupt command */ > -# define ATMCI_CMDR_SPCMD_INTRESP ( 5 << 8) /* Interrupt response */ > -# define ATMCI_CMDR_OPDCMD ( 1 << 11) /* Open Drain */ > -# define ATMCI_CMDR_MAXLAT_5CYC ( 0 << 12) /* Max latency 5 cycles */ > -# define ATMCI_CMDR_MAXLAT_64CYC ( 1 << 12) /* Max latency 64 cycles */ > -# define ATMCI_CMDR_START_XFER ( 1 << 16) /* Start data transfer */ > -# define ATMCI_CMDR_STOP_XFER ( 2 << 16) /* Stop data transfer */ > -# define ATMCI_CMDR_TRDIR_WRITE ( 0 << 18) /* Write data */ > -# define ATMCI_CMDR_TRDIR_READ ( 1 << 18) /* Read data */ > -# define ATMCI_CMDR_BLOCK ( 0 << 19) /* Single-block transfer */ > -# define ATMCI_CMDR_MULTI_BLOCK ( 1 << 19) /* Multi-block transfer */ > -# define ATMCI_CMDR_STREAM ( 2 << 19) /* MMC Stream transfer */ > -# define ATMCI_CMDR_SDIO_BYTE ( 4 << 19) /* SDIO Byte transfer */ > -# define ATMCI_CMDR_SDIO_BLOCK ( 5 << 19) /* SDIO Block transfer */ > -# define ATMCI_CMDR_SDIO_SUSPEND ( 1 << 24) /* SDIO Suspend Command */ > -# define ATMCI_CMDR_SDIO_RESUME ( 2 << 24) /* SDIO Resume Command */ > -#define ATMCI_BLKR 0x0018 /* Block */ > -# define ATMCI_BCNT(x) ((x) << 0) /* Data Block Count */ > -# define ATMCI_BLKLEN(x) ((x) << 16) /* Data Block Length */ > -#define ATMCI_CSTOR 0x001c /* Completion Signal Timeout[2] */ > -# define ATMCI_CSTOCYC(x) ((x) << 0) /* CST cycles */ > -# define ATMCI_CSTOMUL(x) ((x) << 4) /* CST multiplier */ > -#define ATMCI_RSPR 0x0020 /* Response 0 */ > -#define ATMCI_RSPR1 0x0024 /* Response 1 */ > -#define ATMCI_RSPR2 0x0028 /* Response 2 */ > -#define ATMCI_RSPR3 0x002c /* Response 3 */ > -#define ATMCI_RDR 0x0030 /* Receive Data */ > -#define ATMCI_TDR 0x0034 /* Transmit Data */ > -#define ATMCI_SR 0x0040 /* Status */ > -#define ATMCI_IER 0x0044 /* Interrupt Enable */ > -#define ATMCI_IDR 0x0048 /* Interrupt Disable */ > -#define ATMCI_IMR 0x004c /* Interrupt Mask */ > -# define ATMCI_CMDRDY ( 1 << 0) /* Command Ready */ > -# define ATMCI_RXRDY ( 1 << 1) /* Receiver Ready */ > -# define ATMCI_TXRDY ( 1 << 2) /* Transmitter Ready */ > -# define ATMCI_BLKE ( 1 << 3) /* Data Block Ended */ > -# define ATMCI_DTIP ( 1 << 4) /* Data Transfer In Progress */ > -# define ATMCI_NOTBUSY ( 1 << 5) /* Data Not Busy */ > -# define ATMCI_ENDRX ( 1 << 6) /* End of RX Buffer */ > -# define ATMCI_ENDTX ( 1 << 7) /* End of TX Buffer */ > -# define ATMCI_SDIOIRQA ( 1 << 8) /* SDIO IRQ in slot A */ > -# define ATMCI_SDIOIRQB ( 1 << 9) /* SDIO IRQ in slot B */ > -# define ATMCI_SDIOWAIT ( 1 << 12) /* SDIO Read Wait Operation Status */ > -# define ATMCI_CSRCV ( 1 << 13) /* CE-ATA Completion Signal Received */ > -# define ATMCI_RXBUFF ( 1 << 14) /* RX Buffer Full */ > -# define ATMCI_TXBUFE ( 1 << 15) /* TX Buffer Empty */ > -# define ATMCI_RINDE ( 1 << 16) /* Response Index Error */ > -# define ATMCI_RDIRE ( 1 << 17) /* Response Direction Error */ > -# define ATMCI_RCRCE ( 1 << 18) /* Response CRC Error */ > -# define ATMCI_RENDE ( 1 << 19) /* Response End Bit Error */ > -# define ATMCI_RTOE ( 1 << 20) /* Response Time-Out Error */ > -# define ATMCI_DCRCE ( 1 << 21) /* Data CRC Error */ > -# define ATMCI_DTOE ( 1 << 22) /* Data Time-Out Error */ > -# define ATMCI_CSTOE ( 1 << 23) /* Completion Signal Time-out Error */ > -# define ATMCI_BLKOVRE ( 1 << 24) /* DMA Block Overrun Error */ > -# define ATMCI_DMADONE ( 1 << 25) /* DMA Transfer Done */ > -# define ATMCI_FIFOEMPTY ( 1 << 26) /* FIFO Empty Flag */ > -# define ATMCI_XFRDONE ( 1 << 27) /* Transfer Done Flag */ > -# define ATMCI_ACKRCV ( 1 << 28) /* Boot Operation Acknowledge Received */ > -# define ATMCI_ACKRCVE ( 1 << 29) /* Boot Operation Acknowledge Error */ > -# define ATMCI_OVRE ( 1 << 30) /* RX Overrun Error */ > -# define ATMCI_UNRE ( 1 << 31) /* TX Underrun Error */ > -#define ATMCI_DMA 0x0050 /* DMA Configuration[2] */ > -# define ATMCI_DMA_OFFSET(x) ((x) << 0) /* DMA Write Buffer Offset */ > -# define ATMCI_DMA_CHKSIZE(x) ((x) << 4) /* DMA Channel Read and Write Chunk Size */ > -# define ATMCI_DMAEN ( 1 << 8) /* DMA Hardware Handshaking Enable */ > -#define ATMCI_CFG 0x0054 /* Configuration[2] */ > -# define ATMCI_CFG_FIFOMODE_1DATA ( 1 << 0) /* MCI Internal FIFO control mode */ > -# define ATMCI_CFG_FERRCTRL_COR ( 1 << 4) /* Flow Error flag reset control mode */ > -# define ATMCI_CFG_HSMODE ( 1 << 8) /* High Speed Mode */ > -# define ATMCI_CFG_LSYNC ( 1 << 12) /* Synchronize on the last block */ > -#define ATMCI_WPMR 0x00e4 /* Write Protection Mode[2] */ > -# define ATMCI_WP_EN ( 1 << 0) /* WP Enable */ > -# define ATMCI_WP_KEY (0x4d4349 << 8) /* WP Key */ > -#define ATMCI_WPSR 0x00e8 /* Write Protection Status[2] */ > -# define ATMCI_GET_WP_VS(x) ((x) & 0x0f) > -# define ATMCI_GET_WP_VSRC(x) (((x) >> 8) & 0xffff) > -#define ATMCI_VERSION 0x00FC /* Version */ > -#define ATMCI_FIFO_APERTURE 0x0200 /* FIFO Aperture[2] */ > - > -/* This is not including the FIFO Aperture on MCI2 */ > -#define ATMCI_REGS_SIZE 0x100 > - > -/* Register access macros */ > -#ifdef CONFIG_AVR32 > -#define atmci_readl(port, reg) \ > - __raw_readl((port)->regs + reg) > -#define atmci_writel(port, reg, value) \ > - __raw_writel((value), (port)->regs + reg) > -#else > -#define atmci_readl(port, reg) \ > - readl_relaxed((port)->regs + reg) > -#define atmci_writel(port, reg, value) \ > - writel_relaxed((value), (port)->regs + reg) > -#endif > - > -/* On AVR chips the Peripheral DMA Controller is not connected to MCI. */ > -#ifdef CONFIG_AVR32 > -# define ATMCI_PDC_CONNECTED 0 > -#else > -# define ATMCI_PDC_CONNECTED 1 > -#endif > - > -/* > - * Fix sconfig's burst size according to atmel MCI. We need to convert them as: > - * 1 -> 0, 4 -> 1, 8 -> 2, 16 -> 3. > - * > - * This can be done by finding most significant bit set. > - */ > -static inline unsigned int atmci_convert_chksize(unsigned int maxburst) > -{ > - if (maxburst > 1) > - return fls(maxburst) - 2; > - else > - return 0; > -} > - > -#endif /* __DRIVERS_MMC_ATMEL_MCI_H__ */ > diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c > index bf62e42..9f3bb61 100644 > --- a/drivers/mmc/host/atmel-mci.c > +++ b/drivers/mmc/host/atmel-mci.c > @@ -44,7 +44,155 @@ > #include > #include > > -#include "atmel-mci-regs.h" > +/* > + * Superset of MCI IP registers integrated in Atmel AVR32 and AT91 Processors > + * Registers and bitfields marked with [2] are only available in MCI2 > + */ > + > +/* MCI Register Definitions */ > +#define ATMCI_CR 0x0000 /* Control */ > +#define ATMCI_CR_MCIEN BIT(0) /* MCI Enable */ > +#define ATMCI_CR_MCIDIS BIT(1) /* MCI Disable */ > +#define ATMCI_CR_PWSEN BIT(2) /* Power Save Enable */ > +#define ATMCI_CR_PWSDIS BIT(3) /* Power Save Disable */ > +#define ATMCI_CR_SWRST BIT(7) /* Software Reset */ > +#define ATMCI_MR 0x0004 /* Mode */ > +#define ATMCI_MR_CLKDIV(x) ((x) << 0) /* Clock Divider */ > +#define ATMCI_MR_PWSDIV(x) ((x) << 8) /* Power Saving Divider */ > +#define ATMCI_MR_RDPROOF BIT(11) /* Read Proof */ > +#define ATMCI_MR_WRPROOF BIT(12) /* Write Proof */ > +#define ATMCI_MR_PDCFBYTE BIT(13) /* Force Byte Transfer */ > +#define ATMCI_MR_PDCPADV BIT(14) /* Padding Value */ > +#define ATMCI_MR_PDCMODE BIT(15) /* PDC-oriented Mode */ > +#define ATMCI_MR_CLKODD(x) ((x) << 16) /* LSB of Clock Divider */ > +#define ATMCI_DTOR 0x0008 /* Data Timeout */ > +#define ATMCI_DTOCYC(x) ((x) << 0) /* Data Timeout Cycles */ > +#define ATMCI_DTOMUL(x) ((x) << 4) /* Data Timeout Multiplier */ > +#define ATMCI_SDCR 0x000c /* SD Card / SDIO */ > +#define ATMCI_SDCSEL_SLOT_A (0 << 0) /* Select SD slot A */ > +#define ATMCI_SDCSEL_SLOT_B (1 << 0) /* Select SD slot A */ > +#define ATMCI_SDCSEL_MASK (3 << 0) > +#define ATMCI_SDCBUS_1BIT (0 << 6) /* 1-bit data bus */ > +#define ATMCI_SDCBUS_4BIT (2 << 6) /* 4-bit data bus */ > +#define ATMCI_SDCBUS_8BIT (3 << 6) /* 8-bit data bus[2] */ > +#define ATMCI_SDCBUS_MASK (3 << 6) > +#define ATMCI_ARGR 0x0010 /* Command Argument */ > +#define ATMCI_CMDR 0x0014 /* Command */ > +#define ATMCI_CMDR_CMDNB(x) ((x) << 0) /* Command Opcode */ > +#define ATMCI_CMDR_RSPTYP_NONE (0 << 6) /* No response */ > +#define ATMCI_CMDR_RSPTYP_48BIT (1 << 6) /* 48-bit response */ > +#define ATMCI_CMDR_RSPTYP_136BIT (2 << 6) /* 136-bit response */ > +#define ATMCI_CMDR_SPCMD_INIT (1 << 8) /* Initialization command */ > +#define ATMCI_CMDR_SPCMD_SYNC (2 << 8) /* Synchronized command */ > +#define ATMCI_CMDR_SPCMD_INT (4 << 8) /* Interrupt command */ > +#define ATMCI_CMDR_SPCMD_INTRESP (5 << 8) /* Interrupt response */ > +#define ATMCI_CMDR_OPDCMD (1 << 11) /* Open Drain */ > +#define ATMCI_CMDR_MAXLAT_5CYC (0 << 12) /* Max latency 5 cycles */ > +#define ATMCI_CMDR_MAXLAT_64CYC (1 << 12) /* Max latency 64 cycles */ > +#define ATMCI_CMDR_START_XFER (1 << 16) /* Start data transfer */ > +#define ATMCI_CMDR_STOP_XFER (2 << 16) /* Stop data transfer */ > +#define ATMCI_CMDR_TRDIR_WRITE (0 << 18) /* Write data */ > +#define ATMCI_CMDR_TRDIR_READ (1 << 18) /* Read data */ > +#define ATMCI_CMDR_BLOCK (0 << 19) /* Single-block transfer */ > +#define ATMCI_CMDR_MULTI_BLOCK (1 << 19) /* Multi-block transfer */ > +#define ATMCI_CMDR_STREAM (2 << 19) /* MMC Stream transfer */ > +#define ATMCI_CMDR_SDIO_BYTE (4 << 19) /* SDIO Byte transfer */ > +#define ATMCI_CMDR_SDIO_BLOCK (5 << 19) /* SDIO Block transfer */ > +#define ATMCI_CMDR_SDIO_SUSPEND (1 << 24) /* SDIO Suspend Command */ > +#define ATMCI_CMDR_SDIO_RESUME (2 << 24) /* SDIO Resume Command */ > +#define ATMCI_BLKR 0x0018 /* Block */ > +#define ATMCI_BCNT(x) ((x) << 0) /* Data Block Count */ > +#define ATMCI_BLKLEN(x) ((x) << 16) /* Data Block Length */ > +#define ATMCI_CSTOR 0x001c /* Completion Signal Timeout[2] */ > +#define ATMCI_CSTOCYC(x) ((x) << 0) /* CST cycles */ > +#define ATMCI_CSTOMUL(x) ((x) << 4) /* CST multiplier */ > +#define ATMCI_RSPR 0x0020 /* Response 0 */ > +#define ATMCI_RSPR1 0x0024 /* Response 1 */ > +#define ATMCI_RSPR2 0x0028 /* Response 2 */ > +#define ATMCI_RSPR3 0x002c /* Response 3 */ > +#define ATMCI_RDR 0x0030 /* Receive Data */ > +#define ATMCI_TDR 0x0034 /* Transmit Data */ > +#define ATMCI_SR 0x0040 /* Status */ > +#define ATMCI_IER 0x0044 /* Interrupt Enable */ > +#define ATMCI_IDR 0x0048 /* Interrupt Disable */ > +#define ATMCI_IMR 0x004c /* Interrupt Mask */ > +#define ATMCI_CMDRDY BIT(0) /* Command Ready */ > +#define ATMCI_RXRDY BIT(1) /* Receiver Ready */ > +#define ATMCI_TXRDY BIT(2) /* Transmitter Ready */ > +#define ATMCI_BLKE BIT(3) /* Data Block Ended */ > +#define ATMCI_DTIP BIT(4) /* Data Transfer In Progress */ > +#define ATMCI_NOTBUSY BIT(5) /* Data Not Busy */ > +#define ATMCI_ENDRX BIT(6) /* End of RX Buffer */ > +#define ATMCI_ENDTX BIT(7) /* End of TX Buffer */ > +#define ATMCI_SDIOIRQA BIT(8) /* SDIO IRQ in slot A */ > +#define ATMCI_SDIOIRQB BIT(9) /* SDIO IRQ in slot B */ > +#define ATMCI_SDIOWAIT BIT(12) /* SDIO Read Wait Operation Status */ > +#define ATMCI_CSRCV BIT(13) /* CE-ATA Completion Signal Received */ > +#define ATMCI_RXBUFF BIT(14) /* RX Buffer Full */ > +#define ATMCI_TXBUFE BIT(15) /* TX Buffer Empty */ > +#define ATMCI_RINDE BIT(16) /* Response Index Error */ > +#define ATMCI_RDIRE BIT(17) /* Response Direction Error */ > +#define ATMCI_RCRCE BIT(18) /* Response CRC Error */ > +#define ATMCI_RENDE BIT(19) /* Response End Bit Error */ > +#define ATMCI_RTOE BIT(20) /* Response Time-Out Error */ > +#define ATMCI_DCRCE BIT(21) /* Data CRC Error */ > +#define ATMCI_DTOE BIT(22) /* Data Time-Out Error */ > +#define ATMCI_CSTOE BIT(23) /* Completion Signal Time-out Error */ > +#define ATMCI_BLKOVRE BIT(24) /* DMA Block Overrun Error */ > +#define ATMCI_DMADONE BIT(25) /* DMA Transfer Done */ > +#define ATMCI_FIFOEMPTY BIT(26) /* FIFO Empty Flag */ > +#define ATMCI_XFRDONE BIT(27) /* Transfer Done Flag */ > +#define ATMCI_ACKRCV BIT(28) /* Boot Operation Acknowledge Received */ > +#define ATMCI_ACKRCVE BIT(29) /* Boot Operation Acknowledge Error */ > +#define ATMCI_OVRE BIT(30) /* RX Overrun Error */ > +#define ATMCI_UNRE BIT(31) /* TX Underrun Error */ > +#define ATMCI_DMA 0x0050 /* DMA Configuration[2] */ > +#define ATMCI_DMA_OFFSET(x) ((x) << 0) /* DMA Write Buffer Offset */ > +#define ATMCI_DMA_CHKSIZE(x) ((x) << 4) /* DMA Channel Read and Write Chunk Size */ > +#define ATMCI_DMAEN BIT(8) /* DMA Hardware Handshaking Enable */ > +#define ATMCI_CFG 0x0054 /* Configuration[2] */ > +#define ATMCI_CFG_FIFOMODE_1DATA BIT(0) /* MCI Internal FIFO control mode */ > +#define ATMCI_CFG_FERRCTRL_COR BIT(4) /* Flow Error flag reset control mode */ > +#define ATMCI_CFG_HSMODE BIT(8) /* High Speed Mode */ > +#define ATMCI_CFG_LSYNC BIT(12) /* Synchronize on the last block */ > +#define ATMCI_WPMR 0x00e4 /* Write Protection Mode[2] */ > +#define ATMCI_WP_EN BIT(0) /* WP Enable */ > +#define ATMCI_WP_KEY (0x4d4349 << 8) /* WP Key */ > +#define ATMCI_WPSR 0x00e8 /* Write Protection Status[2] */ > +#define ATMCI_GET_WP_VS(x) ((x) & 0x0f) > +#define ATMCI_GET_WP_VSRC(x) (((x) >> 8) & 0xffff) > +#define ATMCI_VERSION 0x00FC /* Version */ > +#define ATMCI_FIFO_APERTURE 0x0200 /* FIFO Aperture[2] */ > + > +/* This is not including the FIFO Aperture on MCI2 */ > +#define ATMCI_REGS_SIZE 0x100 > + > +/* Register access macros */ > +#define atmci_readl(port, reg) \ > + __raw_readl((port)->regs + reg) > +#define atmci_writel(port, reg, value) \ > + __raw_writel((value), (port)->regs + reg) > + > +/* On AVR chips the Peripheral DMA Controller is not connected to MCI. */ > +#ifdef CONFIG_AVR32 > +# define ATMCI_PDC_CONNECTED 0 > +#else > +# define ATMCI_PDC_CONNECTED 1 > +#endif > + > +/* > + * Fix sconfig's burst size according to atmel MCI. We need to convert them as: > + * 1 -> 0, 4 -> 1, 8 -> 2, 16 -> 3. > + * > + * This can be done by finding most significant bit set. > + */ > +static inline unsigned int atmci_convert_chksize(unsigned int maxburst) > +{ > + if (maxburst > 1) > + return fls(maxburst) - 2; > + else > + return 0; > +} > > #define AUTOSUSPEND_DELAY 50 > > -- > 2.5.0 > -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/