Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754183AbbKYQeD (ORCPT ); Wed, 25 Nov 2015 11:34:03 -0500 Received: from mail-yk0-f172.google.com ([209.85.160.172]:34712 "EHLO mail-yk0-f172.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753710AbbKYQeA (ORCPT ); Wed, 25 Nov 2015 11:34:00 -0500 MIME-Version: 1.0 In-Reply-To: <1448292452-5786-3-git-send-email-ludovic.desroches@atmel.com> References: <1448292452-5786-1-git-send-email-ludovic.desroches@atmel.com> <1448292452-5786-3-git-send-email-ludovic.desroches@atmel.com> Date: Wed, 25 Nov 2015 17:33:59 +0100 Message-ID: Subject: Re: [PATCH 3/3] mmc: atmel-mci: atmci_convert_chksize depends on controller version From: Ulf Hansson To: Ludovic Desroches Cc: linux-mmc , "linux-kernel@vger.kernel.org" , Nicolas Ferre Content-Type: text/plain; charset=UTF-8 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 3428 Lines: 95 On 23 November 2015 at 16:27, Ludovic Desroches wrote: > The atmci_convert_chksize() function is no more valid for controller > version 0x600 due to the introduction of '2 data' chunk size. > > Signed-off-by: Ludovic Desroches Thanks, applied for next! Kind regards Uffe > --- > drivers/mmc/host/atmel-mci.c | 43 +++++++++++++++++++++++++++---------------- > 1 file changed, 27 insertions(+), 16 deletions(-) > > diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c > index 9f3bb61..a36ebda 100644 > --- a/drivers/mmc/host/atmel-mci.c > +++ b/drivers/mmc/host/atmel-mci.c > @@ -180,20 +180,6 @@ > # define ATMCI_PDC_CONNECTED 1 > #endif > > -/* > - * Fix sconfig's burst size according to atmel MCI. We need to convert them as: > - * 1 -> 0, 4 -> 1, 8 -> 2, 16 -> 3. > - * > - * This can be done by finding most significant bit set. > - */ > -static inline unsigned int atmci_convert_chksize(unsigned int maxburst) > -{ > - if (maxburst > 1) > - return fls(maxburst) - 2; > - else > - return 0; > -} > - > #define AUTOSUSPEND_DELAY 50 > > #define ATMCI_DATA_ERROR_FLAGS (ATMCI_DCRCE | ATMCI_DTOE | ATMCI_OVRE | ATMCI_UNRE) > @@ -732,6 +718,29 @@ static inline unsigned int atmci_get_version(struct atmel_mci *host) > return atmci_readl(host, ATMCI_VERSION) & 0x00000fff; > } > > +/* > + * Fix sconfig's burst size according to atmel MCI. We need to convert them as: > + * 1 -> 0, 4 -> 1, 8 -> 2, 16 -> 3. > + * With version 0x600, we need to convert them as: 1 -> 0, 2 -> 1, 4 -> 2, > + * 8 -> 3, 16 -> 4. > + * > + * This can be done by finding most significant bit set. > + */ > +static inline unsigned int atmci_convert_chksize(struct atmel_mci *host, > + unsigned int maxburst) > +{ > + unsigned int version = atmci_get_version(host); > + unsigned int offset = 2; > + > + if (version >= 0x600) > + offset = 1; > + > + if (maxburst > 1) > + return fls(maxburst) - offset; > + else > + return 0; > +} > + > static void atmci_timeout_timer(unsigned long data) > { > struct atmel_mci *host; > @@ -1182,11 +1191,13 @@ atmci_prepare_data_dma(struct atmel_mci *host, struct mmc_data *data) > if (data->flags & MMC_DATA_READ) { > direction = DMA_FROM_DEVICE; > host->dma_conf.direction = slave_dirn = DMA_DEV_TO_MEM; > - maxburst = atmci_convert_chksize(host->dma_conf.src_maxburst); > + maxburst = atmci_convert_chksize(host, > + host->dma_conf.src_maxburst); > } else { > direction = DMA_TO_DEVICE; > host->dma_conf.direction = slave_dirn = DMA_MEM_TO_DEV; > - maxburst = atmci_convert_chksize(host->dma_conf.dst_maxburst); > + maxburst = atmci_convert_chksize(host, > + host->dma_conf.dst_maxburst); > } > > if (host->caps.has_dma_conf_reg) > -- > 2.5.0 > -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/