Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751558AbbKZMg2 (ORCPT ); Thu, 26 Nov 2015 07:36:28 -0500 Received: from mailgw02.mediatek.com ([210.61.82.184]:42833 "EHLO mailgw02.mediatek.com" rhost-flags-OK-FAIL-OK-FAIL) by vger.kernel.org with ESMTP id S1750786AbbKZMgZ (ORCPT ); Thu, 26 Nov 2015 07:36:25 -0500 X-Listener-Flag: 11101 From: Chaotian Jing To: Ulf Hansson CC: Matthias Brugger , Stephen Boyd , Chaotian Jing , Adrian Hunter , Minda Chen , , , , , Subject: [PATCH v2] mmc: core: fix __mmc_switch timeout caused by preempt Date: Thu, 26 Nov 2015 20:36:09 +0800 Message-ID: <1448541369-23086-1-git-send-email-chaotian.jing@mediatek.com> X-Mailer: git-send-email 1.8.1.1.dirty MIME-Version: 1.0 Content-Type: text/plain X-MTK: N Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 2546 Lines: 73 there is a time window between __mmc_send_status() and time_afer(), on some eMMC chip, the timeout_ms is only 10ms, if this thread was scheduled out during this period, then, even card has already changes to transfer state by the result of CMD13, this part of code also treat it to timeout error. So, need calculate timeout first, then call __mmc_send_status(), if already timeout and card still in programing state, then treat it to the real timeout error. Signed-off-by: Chaotian Jing --- drivers/mmc/core/mmc_ops.c | 23 +++++++++++++++-------- 1 file changed, 15 insertions(+), 8 deletions(-) diff --git a/drivers/mmc/core/mmc_ops.c b/drivers/mmc/core/mmc_ops.c index 1f44426..eba5295 100644 --- a/drivers/mmc/core/mmc_ops.c +++ b/drivers/mmc/core/mmc_ops.c @@ -489,6 +489,7 @@ int __mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value, unsigned long timeout; u32 status = 0; bool use_r1b_resp = use_busy_signal; + bool expired; mmc_retune_hold(host); @@ -545,9 +546,23 @@ int __mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value, timeout = jiffies + msecs_to_jiffies(timeout_ms); do { if (send_status) { + /* + * Timeout if the device never leaves the program state. + * Due to the possibility of being preempted after + * sending the status command, check the expiration + * time first. + */ + expired = time_after(jiffies, timeout); err = __mmc_send_status(card, &status, ignore_crc); if (err) goto out; + if (expired && + R1_CURRENT_STATE(status) == R1_STATE_PRG) { + pr_err("%s: Card stuck in programming state! %s\n", + mmc_hostname(host), __func__); + err = -ETIMEDOUT; + goto out; + } } if ((host->caps & MMC_CAP_WAIT_WHILE_BUSY) && use_r1b_resp) break; @@ -563,14 +578,6 @@ int __mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value, mmc_delay(timeout_ms); goto out; } - - /* Timeout if the device never leaves the program state. */ - if (time_after(jiffies, timeout)) { - pr_err("%s: Card stuck in programming state! %s\n", - mmc_hostname(host), __func__); - err = -ETIMEDOUT; - goto out; - } } while (R1_CURRENT_STATE(status) == R1_STATE_PRG); err = mmc_switch_status_error(host, status); -- 1.8.1.1.dirty -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/