Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753934AbbK3Luh (ORCPT ); Mon, 30 Nov 2015 06:50:37 -0500 Received: from kvm5.telegraphics.com.au ([98.124.60.144]:33059 "EHLO kvm5.telegraphics.com.au" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752606AbbK3LuY (ORCPT ); Mon, 30 Nov 2015 06:50:24 -0500 Date: Mon, 30 Nov 2015 22:50:13 +1100 (AEDT) From: Finn Thain To: Ondrej Zary cc: Michael Schmitz , linux-m68k@vger.kernel.org, linux-scsi@vger.kernel.org, linux-kernel@vger.kernel.org Subject: Re: [RFC PATCH 73/71] ncr5380: Use runtime register mapping In-Reply-To: <1448789980-30094-1-git-send-email-linux@rainbow-software.org> Message-ID: References: <20151118083455.331768508@telegraphics.com.au> <1448789980-30094-1-git-send-email-linux@rainbow-software.org> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 10981 Lines: 302 On Sun, 29 Nov 2015, Ondrej Zary wrote: > Convert compile-time C400_ register mapping to runtime mapping. > This removes the weird negative register offsets and allows adding > additional mappings. > > Signed-off-by: Ondrej Zary > --- > drivers/scsi/NCR5380.h | 13 +--------- > drivers/scsi/g_NCR5380.c | 61 ++++++++++++++++++++++++++-------------------- > drivers/scsi/g_NCR5380.h | 12 ++++++--- > 3 files changed, 43 insertions(+), 43 deletions(-) > > diff --git a/drivers/scsi/NCR5380.h b/drivers/scsi/NCR5380.h > index 36779df..0d8ec43 100644 > --- a/drivers/scsi/NCR5380.h > +++ b/drivers/scsi/NCR5380.h > @@ -163,8 +163,7 @@ > /* Write any value to this register to start an ini mode DMA receive */ > #define START_DMA_INITIATOR_RECEIVE_REG 7 /* wo */ > > -#define C400_CONTROL_STATUS_REG NCR53C400_register_offset-8 /* rw */ > - > +/* C400_CONTROL_STATUS_REG */ That symbol is removed by this patch. No need for abbreviations. How about /* NCR 53C400 and 53C400A Control Status Register bits: */ > #define CSR_RESET 0x80 /* wo Resets 53c400 */ > #define CSR_53C80_REG 0x80 /* ro 5380 registers busy */ > #define CSR_TRANS_DIR 0x40 /* rw Data transfer direction */ > @@ -181,16 +180,6 @@ > #define CSR_BASE CSR_53C80_INTR > #endif > > -/* Number of 128-byte blocks to be transferred */ > -#define C400_BLOCK_COUNTER_REG NCR53C400_register_offset-7 /* rw */ > - > -/* Resume transfer after disconnect */ > -#define C400_RESUME_TRANSFER_REG NCR53C400_register_offset-6 /* wo */ > - > -/* Access to host buffer stack */ > -#define C400_HOST_BUFFER NCR53C400_register_offset-4 /* rw */ > - > - > /* Note : PHASE_* macros are based on the values of the STATUS register */ > #define PHASE_MASK (SR_MSG | SR_CD | SR_IO) > > diff --git a/drivers/scsi/g_NCR5380.c b/drivers/scsi/g_NCR5380.c > index a9a237f..ce444da 100644 > --- a/drivers/scsi/g_NCR5380.c > +++ b/drivers/scsi/g_NCR5380.c > @@ -253,6 +253,7 @@ static int __init generic_NCR5380_detect(struct scsi_host_template *tpnt) > }; > int flags; > struct Scsi_Host *instance; > + struct NCR5380_hostdata *hostdata; > #ifdef SCSI_G_NCR5380_MEM > unsigned long base; > void __iomem *iomem; > @@ -395,6 +396,7 @@ static int __init generic_NCR5380_detect(struct scsi_host_template *tpnt) > instance = scsi_register(tpnt, sizeof(struct NCR5380_hostdata)); > if (instance == NULL) > goto out_release; > + hostdata = shost_priv(instance); > > #ifndef SCSI_G_NCR5380_MEM > instance->io_port = overrides[current_override].NCR5380_map_name; > @@ -404,18 +406,27 @@ static int __init generic_NCR5380_detect(struct scsi_host_template *tpnt) > * On NCR53C400 boards, NCR5380 registers are mapped 8 past > * the base address. > */ > - if (overrides[current_override].board == BOARD_NCR53C400) > + if (overrides[current_override].board == BOARD_NCR53C400) { > instance->io_port += 8; > + hostdata->c400_ctl_status = 0; > + hostdata->c400_blk_cnt = 1; > + hostdata->c400_host_buf = 4; > + } > #else > instance->base = overrides[current_override].NCR5380_map_name; > - ((struct NCR5380_hostdata *)instance->hostdata)->iomem = iomem; > + hostdata->iomem = iomem; > + if (overrides[current_override].board == BOARD_NCR53C400) { > + hostdata->c400_ctl_status = 0x100; > + hostdata->c400_blk_cnt = 0x101; > + hostdata->c400_host_buf = 0x104; > + } > #endif > > if (NCR5380_init(instance, flags)) > goto out_unregister; > > if (overrides[current_override].board == BOARD_NCR53C400) > - NCR5380_write(C400_CONTROL_STATUS_REG, CSR_BASE); > + NCR5380_write(hostdata->c400_ctl_status, CSR_BASE); > > NCR5380_maybe_reset_bus(instance); > > @@ -523,30 +534,28 @@ generic_NCR5380_biosparam(struct scsi_device *sdev, struct block_device *bdev, > > static inline int NCR5380_pread(struct Scsi_Host *instance, unsigned char *dst, int len) > { > -#ifdef SCSI_G_NCR5380_MEM > struct NCR5380_hostdata *hostdata = shost_priv(instance); > -#endif > int blocks = len / 128; > int start = 0; > int bl; > > - NCR5380_write(C400_CONTROL_STATUS_REG, CSR_BASE | CSR_TRANS_DIR); > - NCR5380_write(C400_BLOCK_COUNTER_REG, blocks); > + NCR5380_write(hostdata->c400_ctl_status, CSR_BASE | CSR_TRANS_DIR); > + NCR5380_write(hostdata->c400_blk_cnt, blocks); > while (1) { > - if ((bl = NCR5380_read(C400_BLOCK_COUNTER_REG)) == 0) { > + if ((bl = NCR5380_read(hostdata->c400_blk_cnt)) == 0) { > break; > } > - if (NCR5380_read(C400_CONTROL_STATUS_REG) & CSR_GATED_53C80_IRQ) { > + if (NCR5380_read(hostdata->c400_ctl_status) & CSR_GATED_53C80_IRQ) { > printk(KERN_ERR "53C400r: Got 53C80_IRQ start=%d, blocks=%d\n", start, blocks); > return -1; > } > - while (NCR5380_read(C400_CONTROL_STATUS_REG) & CSR_HOST_BUF_NOT_RDY); > + while (NCR5380_read(hostdata->c400_ctl_status) & CSR_HOST_BUF_NOT_RDY); > > #ifndef SCSI_G_NCR5380_MEM > { > int i; > for (i = 0; i < 128; i++) > - dst[start + i] = NCR5380_read(C400_HOST_BUFFER); > + dst[start + i] = NCR5380_read(hostdata->c400_host_buf); > } > #else > /* implies SCSI_G_NCR5380_MEM */ > @@ -558,7 +567,7 @@ static inline int NCR5380_pread(struct Scsi_Host *instance, unsigned char *dst, > } > > if (blocks) { > - while (NCR5380_read(C400_CONTROL_STATUS_REG) & CSR_HOST_BUF_NOT_RDY) > + while (NCR5380_read(hostdata->c400_ctl_status) & CSR_HOST_BUF_NOT_RDY) > { > // FIXME - no timeout > } > @@ -567,7 +576,7 @@ static inline int NCR5380_pread(struct Scsi_Host *instance, unsigned char *dst, > { > int i; > for (i = 0; i < 128; i++) > - dst[start + i] = NCR5380_read(C400_HOST_BUFFER); > + dst[start + i] = NCR5380_read(hostdata->c400_host_buf); > } > #else > /* implies SCSI_G_NCR5380_MEM */ > @@ -578,7 +587,7 @@ static inline int NCR5380_pread(struct Scsi_Host *instance, unsigned char *dst, > blocks--; > } > > - if (!(NCR5380_read(C400_CONTROL_STATUS_REG) & CSR_GATED_53C80_IRQ)) > + if (!(NCR5380_read(hostdata->c400_ctl_status) & CSR_GATED_53C80_IRQ)) > printk("53C400r: no 53C80 gated irq after transfer"); > > #if 0 > @@ -586,7 +595,7 @@ static inline int NCR5380_pread(struct Scsi_Host *instance, unsigned char *dst, > * DON'T DO THIS - THEY NEVER ARRIVE! > */ > printk("53C400r: Waiting for 53C80 registers\n"); > - while (NCR5380_read(C400_CONTROL_STATUS_REG) & CSR_53C80_REG) > + while (NCR5380_read(hostdata->c400_ctl_status) & CSR_53C80_REG) > ; > #endif > if (!(NCR5380_read(BUS_AND_STATUS_REG) & BASR_END_DMA_TRANSFER)) > @@ -607,31 +616,29 @@ static inline int NCR5380_pread(struct Scsi_Host *instance, unsigned char *dst, > > static inline int NCR5380_pwrite(struct Scsi_Host *instance, unsigned char *src, int len) > { > -#ifdef SCSI_G_NCR5380_MEM > struct NCR5380_hostdata *hostdata = shost_priv(instance); > -#endif > int blocks = len / 128; > int start = 0; > int bl; > int i; > > - NCR5380_write(C400_CONTROL_STATUS_REG, CSR_BASE); > - NCR5380_write(C400_BLOCK_COUNTER_REG, blocks); > + NCR5380_write(hostdata->c400_ctl_status, CSR_BASE); > + NCR5380_write(hostdata->c400_blk_cnt, blocks); > while (1) { > - if (NCR5380_read(C400_CONTROL_STATUS_REG) & CSR_GATED_53C80_IRQ) { > + if (NCR5380_read(hostdata->c400_ctl_status) & CSR_GATED_53C80_IRQ) { > printk(KERN_ERR "53C400w: Got 53C80_IRQ start=%d, blocks=%d\n", start, blocks); > return -1; > } > > - if ((bl = NCR5380_read(C400_BLOCK_COUNTER_REG)) == 0) { > + if ((bl = NCR5380_read(hostdata->c400_blk_cnt)) == 0) { > break; > } > - while (NCR5380_read(C400_CONTROL_STATUS_REG) & CSR_HOST_BUF_NOT_RDY) > + while (NCR5380_read(hostdata->c400_ctl_status) & CSR_HOST_BUF_NOT_RDY) > ; // FIXME - timeout > #ifndef SCSI_G_NCR5380_MEM > { > for (i = 0; i < 128; i++) > - NCR5380_write(C400_HOST_BUFFER, src[start + i]); > + NCR5380_write(hostdata->c400_host_buf, src[start + i]); > } > #else > /* implies SCSI_G_NCR5380_MEM */ > @@ -642,13 +649,13 @@ static inline int NCR5380_pwrite(struct Scsi_Host *instance, unsigned char *src, > blocks--; > } > if (blocks) { > - while (NCR5380_read(C400_CONTROL_STATUS_REG) & CSR_HOST_BUF_NOT_RDY) > + while (NCR5380_read(hostdata->c400_ctl_status) & CSR_HOST_BUF_NOT_RDY) > ; // FIXME - no timeout > > #ifndef SCSI_G_NCR5380_MEM > { > for (i = 0; i < 128; i++) > - NCR5380_write(C400_HOST_BUFFER, src[start + i]); > + NCR5380_write(hostdata->c400_host_buf, src[start + i]); > } > #else > /* implies SCSI_G_NCR5380_MEM */ > @@ -661,7 +668,7 @@ static inline int NCR5380_pwrite(struct Scsi_Host *instance, unsigned char *src, > > #if 0 > printk("53C400w: waiting for registers to be available\n"); > - THEY NEVER DO ! while (NCR5380_read(C400_CONTROL_STATUS_REG) & CSR_53C80_REG); > + THEY NEVER DO ! while (NCR5380_read(hostdata->c400_ctl_status) & CSR_53C80_REG); > printk("53C400w: Got em\n"); > #endif > > @@ -669,7 +676,7 @@ static inline int NCR5380_pwrite(struct Scsi_Host *instance, unsigned char *src, > /* All documentation says to check for this. Maybe my hardware is too > * fast. Waiting for it seems to work fine! KLL > */ > - while (!(i = NCR5380_read(C400_CONTROL_STATUS_REG) & CSR_GATED_53C80_IRQ)) > + while (!(i = NCR5380_read(hostdata->c400_ctl_status) & CSR_GATED_53C80_IRQ)) > ; // FIXME - no timeout > > /* > diff --git a/drivers/scsi/g_NCR5380.h b/drivers/scsi/g_NCR5380.h > index fd201e9..633edd0 100644 > --- a/drivers/scsi/g_NCR5380.h > +++ b/drivers/scsi/g_NCR5380.h > @@ -29,7 +29,6 @@ > > #define NCR5380_map_type int > #define NCR5380_map_name port > -#define NCR53C400_register_offset 0 > > #ifdef CONFIG_SCSI_GENERIC_NCR53C400 > #define NCR5380_region_size 16 > @@ -42,7 +41,10 @@ > #define NCR5380_write(reg, value) \ > outb(value, instance->io_port + (reg)) > > -#define NCR5380_implementation_fields /* none */ > +#define NCR5380_implementation_fields \ > + int c400_ctl_status;\ > + int c400_blk_cnt;\ > + int c400_host_buf; > > #else > /* therefore SCSI_G_NCR5380_MEM */ A space before the backslash would be more consistent. > @@ -50,7 +52,6 @@ > > #define NCR5380_map_type unsigned long > #define NCR5380_map_name base > -#define NCR53C400_register_offset 0x108 > #define NCR53C400_mem_base 0x3880 > #define NCR53C400_host_buffer 0x3900 > #define NCR5380_region_size 0x3a00 > @@ -63,7 +64,10 @@ > NCR53C400_mem_base + (reg)) > > #define NCR5380_implementation_fields \ > - void __iomem *iomem; > + void __iomem *iomem;\ > + int c400_ctl_status;\ > + int c400_blk_cnt;\ > + int c400_host_buf; > > #endif > Same here. -- -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/