Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1756171AbbLAMMn (ORCPT ); Tue, 1 Dec 2015 07:12:43 -0500 Received: from mailgw02.mediatek.com ([210.61.82.184]:50945 "EHLO mailgw02.mediatek.com" rhost-flags-OK-FAIL-OK-FAIL) by vger.kernel.org with ESMTP id S1756089AbbLAMMm (ORCPT ); Tue, 1 Dec 2015 07:12:42 -0500 X-Listener-Flag: 11101 From: Chaotian Jing To: Ulf Hansson CC: Matthias Brugger , Chaotian Jing , , , , , , Daniel Kurtz Subject: [PATCH] mmc: mediatek: change some dev_err to dev_dbg Date: Tue, 1 Dec 2015 20:12:34 +0800 Message-ID: <1448971954-398-1-git-send-email-chaotian.jing@mediatek.com> X-Mailer: git-send-email 1.8.1.1.dirty MIME-Version: 1.0 Content-Type: text/plain X-MTK: N Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 1750 Lines: 44 there are too many error logs shown when use CMD21/CMD19 to do tune, and it will appear at each resume time, print out so many logs to the uart console cost too mush time. so change it to dev_dbg. Signed-off-by: Chaotian Jing --- drivers/mmc/host/mtk-sd.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c index 39568cc..34d23b8 100644 --- a/drivers/mmc/host/mtk-sd.c +++ b/drivers/mmc/host/mtk-sd.c @@ -972,7 +972,7 @@ static bool msdc_data_xfer_done(struct msdc_host *host, u32 events, if ((events & MSDC_INT_XFER_COMPL) && (!stop || !stop->error)) { data->bytes_xfered = data->blocks * data->blksz; } else { - dev_err(host->dev, "interrupt events: %x\n", events); + dev_dbg(host->dev, "interrupt events: %x\n", events); msdc_reset_hw(host); host->error |= REQ_DAT_ERR; data->bytes_xfered = 0; @@ -982,10 +982,10 @@ static bool msdc_data_xfer_done(struct msdc_host *host, u32 events, else if (events & MSDC_INT_DATCRCERR) data->error = -EILSEQ; - dev_err(host->dev, "%s: cmd=%d; blocks=%d", + dev_dbg(host->dev, "%s: cmd=%d; blocks=%d", __func__, mrq->cmd->opcode, data->blocks); - dev_err(host->dev, "data_error=%d xfer_size=%d\n", - (int)data->error, data->bytes_xfered); + dev_dbg(host->dev, "data_error=%d xfer_size=%d\n", + (int)data->error, data->bytes_xfered); } msdc_data_xfer_next(host, mrq, data); -- 1.8.1.1.dirty -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/