From: Marek Szyprowski <m.szyprowski@samsung.com>
To: linux-samsung-soc@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
        linux-kernel@vger.kernel.org
Cc: Marek Szyprowski <m.szyprowski@samsung.com>,
        Russell King - ARM Linux <linux@arm.linux.org.uk>,
        Ulf Hansson <ulf.hansson@linaro.org>,
        Tomeu Vizoso <tomeu.vizoso@collabora.com>,
        Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
        Kukjin Kim <kgene@kernel.org>,
        Krzysztof Kozlowski <k.kozlowski@samsung.com>,
        Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Subject: [PATCH v3 1/3] driver core: handle -EPROBE_DEFER from bus_type.match()
Date: Tue, 01 Dec 2015 14:34:24 +0100
Message-id: <1448976866-7892-2-git-send-email-m.szyprowski@samsung.com>
In-reply-to: <1448976866-7892-1-git-send-email-m.szyprowski@samsung.com>
References: <1448976866-7892-1-git-send-email-m.szyprowski@samsung.com>
Sender: linux-kernel-owner@vger.kernel.org
Content-Length: 4380
Lines: 115

From: Tomeu Vizoso <tomeu.vizoso@collabora.com>

Allow implementations of the match() callback in struct bus_type to
return errors and if it's -EPROBE_DEFER then queue the device for
deferred probing.

This is useful to buses such as AMBA in which devices are registered
before their matching information can be retrieved from the HW
(typically because a clock driver hasn't probed yet).

Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
[changed if-else code structure, adjusted documentation to match the code]
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
---
 Documentation/driver-model/porting.txt |  6 ++++--
 drivers/base/dd.c                      | 24 ++++++++++++++++++++++--
 include/linux/device.h                 |  2 +-
 3 files changed, 27 insertions(+), 5 deletions(-)

diff --git a/Documentation/driver-model/porting.txt b/Documentation/driver-model/porting.txt
index 92d86f7..453053f 100644
--- a/Documentation/driver-model/porting.txt
+++ b/Documentation/driver-model/porting.txt
@@ -340,8 +340,10 @@ comparison:
 
   int (*match)(struct device * dev, struct device_driver * drv);
 
-match should return '1' if the driver supports the device, and '0'
-otherwise. 
+match should return positive value if the driver supports the device,
+and zero otherwise. It may also return error code (for example
+-EPROBE_DEFER) if determining that given driver supports the device is
+not possible.
 
 When a device is registered, the bus's list of drivers is iterated
 over. bus->match() is called for each one until a match is found. 
diff --git a/drivers/base/dd.c b/drivers/base/dd.c
index a641cf3..793e915 100644
--- a/drivers/base/dd.c
+++ b/drivers/base/dd.c
@@ -490,6 +490,7 @@ static int __device_attach_driver(struct device_driver *drv, void *_data)
 	struct device_attach_data *data = _data;
 	struct device *dev = data->dev;
 	bool async_allowed;
+	int ret;
 
 	/*
 	 * Check if device has already been claimed. This may
@@ -500,8 +501,17 @@ static int __device_attach_driver(struct device_driver *drv, void *_data)
 	if (dev->driver)
 		return -EBUSY;
 
-	if (!driver_match_device(drv, dev))
+	ret = driver_match_device(drv, dev);
+	if (ret == 0) {
+		/* no match */
 		return 0;
+	} else if (ret == -EPROBE_DEFER) {
+		dev_dbg(dev, "Device match requests probe deferral\n");
+		driver_deferred_probe_add(dev);
+	} else if (ret < 0) {
+		dev_dbg(dev, "Bus failed to match device: %d", ret);
+		return ret;
+	} /* ret > 0 means positive match */
 
 	async_allowed = driver_allows_async_probing(drv);
 
@@ -621,6 +631,7 @@ void device_initial_probe(struct device *dev)
 static int __driver_attach(struct device *dev, void *data)
 {
 	struct device_driver *drv = data;
+	int ret;
 
 	/*
 	 * Lock device and try to bind to it. We drop the error
@@ -632,8 +643,17 @@ static int __driver_attach(struct device *dev, void *data)
 	 * is an error.
 	 */
 
-	if (!driver_match_device(drv, dev))
+	ret = driver_match_device(drv, dev);
+	if (ret == 0) {
+		/* no match */
 		return 0;
+	} else if (ret == -EPROBE_DEFER) {
+		dev_dbg(dev, "Device match requests probe deferral\n");
+		driver_deferred_probe_add(dev);
+	} else if (ret < 0) {
+		dev_dbg(dev, "Bus failed to match device: %d", ret);
+		return ret;
+	} /* ret > 0 means positive match */
 
 	if (dev->parent)	/* Needed for USB */
 		device_lock(dev->parent);
diff --git a/include/linux/device.h b/include/linux/device.h
index b8f411b..d4e7d1f 100644
--- a/include/linux/device.h
+++ b/include/linux/device.h
@@ -70,7 +70,7 @@ extern void bus_remove_file(struct bus_type *, struct bus_attribute *);
  * @dev_groups:	Default attributes of the devices on the bus.
  * @drv_groups: Default attributes of the device drivers on the bus.
  * @match:	Called, perhaps multiple times, whenever a new device or driver
- *		is added for this bus. It should return a nonzero value if the
+ *		is added for this bus. It should return a positive value if the
  *		given device can be handled by the given driver.
  * @uevent:	Called when a device is added, removed, or a few other things
  *		that generate uevents to add the environment variables.
-- 
1.9.2

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/