Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1757346AbbLAXii (ORCPT ); Tue, 1 Dec 2015 18:38:38 -0500 Received: from muru.com ([72.249.23.125]:49869 "EHLO muru.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1757230AbbLAXig (ORCPT ); Tue, 1 Dec 2015 18:38:36 -0500 From: Tony Lindgren To: linux-kernel@vger.kernel.org Cc: linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org, Brian Hutchinson , Delio Brignoli , Neil Armstrong , Matthijs van Duin , Philipp Rosenberger Subject: [PATCH 00/10] Patches to get dm814x-evm booting to NFSroot Date: Tue, 1 Dec 2015 15:38:13 -0800 Message-Id: <1449013103-23238-1-git-send-email-tony@atomide.com> X-Mailer: git-send-email 2.6.2 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 2549 Lines: 81 Hi all, Here are some fixes for v4.5 merge window to get dm814x-evm booting. While hp t410 boots based on the bootloader clocks, dm814x-evm needs more things configured. Especially the clock dts entries were all wrong and just happened to be harmless on hp t410. To boot, you probably want to use v4.4-rc3 because of commit 29f5b34ca1a1 ("arm: omap2+: add missing HWMOD_NO_IDLEST in 81xx hwmod data") and also manually apply commit 0db19b850468 ("net: cpsw: Fix ethernet regression for dm814x") from Linux next. I have more changes coming up after this series after I clean them up a bit. Here's a brief status update for people: What's working after this series on dm814x-evm and hp t410: - Timers - Serial - Ethernet - DMA - I2C (only tested so far with i2cdetect -r 0) - GPIO (only tested with additional MMC patches for card detect) I have the following additional patches coming soonish: - Basic ADPLL clock driver - MMC support - USB support - Minimal j5eco-evm support Should work with just configuration: - [PATCH 0/3] pwm: omap: Add PWM support using dual-mode timers I'm not working on any of the accelerators or graphics FYI. If somebody has patches coming for those please notify on the linux-omap and linux-arm-kernel mailings lists so we can avoid duplicate work. Cheers, Tony Tony Lindgren (10): ARM: OMAP2+: Fix timer entries for dm814x clk: ti: Add few dm814x clock aliases ARM: OMAP2+: Add DPPLS clock manager for dm814x ARM: OMAP2+: Enable GPIO for dm814x ARM: OMAP2+: Disable GPIO softreset for dm81xx ARM: OMAP2+: Remove useless check for legacy booting for dm814x ARM: dts: Fix dm814x entries for pllss and prcm ARM: dts: Fix some mux and divider clocks to get dm814x-evm booting ARM: dts: Fix dm8148 control modules ranges ARM: dts: Fix dm814x pinctrl address and mask arch/arm/boot/dts/dm814x-clocks.dtsi | 109 +++++++++++++++++++++-------- arch/arm/boot/dts/dm814x.dtsi | 25 ++++--- arch/arm/mach-omap2/io.c | 3 +- arch/arm/mach-omap2/omap_hwmod_81xx_data.c | 15 ++-- arch/arm/mach-omap2/prm_common.c | 6 ++ drivers/clk/ti/clk-814x.c | 4 ++ include/linux/clk/ti.h | 1 + 7 files changed, 117 insertions(+), 46 deletions(-) -- 2.6.2 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/